Screw compressor GA250

Atlas Copco GA250

Condition: excellent (used), Year of construction: 2018, operating hours: 34,656 h, functionality: fully functional, power: 250 kW (339.91 HP), volume flow: 2,694 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Second hand Atlas Copco GA250VSD, year of manufacture 2018, approximately 34,656 operating hours. 10 bar with 44.90 m3/min. 250 kW. Iedow Ewd Ropfx Ap Hotl

Condition: good (used), Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine, cooling unit -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 592 S -Power: 3 kW / 1450 rpm -Volume flow rate: 22.14 m³/h Ijdpsguzr Hjfx Ap Hetl -Max. operating pressure: 24.5 bar -Number: 2x cooling units available -Price: per piece -Dimensions: 550/315/H390 mm -Weight: 88 kg

Condition: repair required (used), Year of construction: 2007, functionality: not functional, power: 250 kW (339.91 HP), volume flow: 2,256 m³/h, pressure (max.): 9.75 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Screw compressor Atlas Copco GA250FF Dryer integrated Itsdpfx Apszhu Naj Hel 250 kW 9.75 bar 37.80 m3/min Year of manufacture: 2007 Main motor defective Price: 9,000 EUR

Condition: used, Full container of used electric screw compressors for export. Container loading included in the price. Ijdpsw Imvyjfx Ap Hotl

Condition: like new (used), Year of construction: 2013, operating hours: 39,945 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 5,500 mm, total width: 2,650 mm, spindle speed (min.): 28,000 rpm, coolant supply: 40 bar, Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Itedpexv Av Rofx Ap Hjl Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Arrangement for external pallet management Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine running times Under power: 62983 Spindle Working: 39945 Rated power kVA: 60 Basic machine dimensions / weight Length mm: 5500 Width mm: 2650 Height mm: 2900 Weight kg: 9500 + system 3R

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06007153/001, total height: 6,050 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 210 kg, construction height: 6,050 mm, input voltage: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial Number: 06007153/001 Year of manufacture: 2006 Total load capacity: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available upon request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (Height adjustable to available space) Power supply: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold Isdpfsxq Tbtsx Ap Hetl Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed; more or heavier trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Storage capacity with 36 trays: approx. 95 m², each tray approx. 2.64 m² - Electronic volume measuring system with 25 mm grid on the display - Access opening with sliding doors for protection of personnel and stored goods - C2000 Control System, with B/W OP2000 display - LED anti-glare lighting above access point - Toothed-belt drive for minimal noise - Toothed-belt drive for fastest order picking - Shelf spacing adjustable in 25 mm increments by configuring support profiles, ideal for high-density storage - Weight management system monitors the load per tray - Includes light pointer Price: On request only by e-mail Price: excluding VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from brands such as Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: like new (used), Year of construction: 2016, operating hours: 390 h, functionality: fully functional, type of input current: three-phase, overall weight: 827 kg, Carrier water chiller Model: 30RBS-140B0181-ME, year 2016, R410A. 135 kW (116,100 frigories), cooling only, maximum consumption: 61 kW. Dimensions: 2258x2050x1330 mm, plate heat exchanger, weight: 827 kg. Machines fully tested in our warehouse with gas, inspection possible. Reference: 1137. Itedpfjyfwuzjx Ap Hol

Condition: used, Year of construction: 2014, x-axis 1.200 mm y-axis 3.000 mm z-axis 1.000 mm solution 0.0001 mm max. workpiece height 1.200 mm max. workpiece weight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Itsdpfx Apezbc Hho Hol Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, 150-Ton Lot of Industrial Fasteners Manufacturers: CHIEF / PGB FASTENER / FABORY Type: Industrial Fasteners (multi-reference lot) Industrial Applications Used in steel construction, industrial maintenance, machine assembly, and large-scale mechanical installations. Itjdpfx Ajxdautjp Hol Main Technical Specifications: - Quantity: 150 tons - Composition: Bolts, screws, nuts, washers – various sizes and standards - Packaging: Pallet / metal crate - Multi-brand references: CHIEF, PGB FASTENER, FABORY 🧩 Machine Usage This bulk lot of industrial fasteners is intended for professionals seeking large-scale fastening solutions for maintenance, construction, or resale. Perfect for production workshops, maintenance companies, or industrial hardware resellers. ⚙️ Features / Differentiators Exceptional lot of 150 tons including a wide range of standardized industrial fasteners. Sourced from three reputable brands ensuring standard compatibility (ISO, DIN, etc.). Ideal for cost-effective bulk supply management. 📷 Detailed listing and photos available on request.

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, compressed air connection: 16 bar, total width: 387 mm, total length: 565 mm, total height: 1,007 mm, overall weight: 75 kg, pressure: 16 bar, operating pressure: 8 bar, noise level: 120 dB, hose package length: 7,000 mm, High-performance dry ice blasting system IC 310 S with integrated dry ice mill IS 10 (built-in fully automatic crushing device) for delicate cleaning using micro-particles up to aggressive blasting on demanding surfaces. Itjdpfxswum Svo Ap Hjl The patented dry ice mill IS 10 allows you to reduce 3 mm dry ice pellets to 1.5 mm micro-pellets as needed, enabling you to clean even sensitive surfaces, such as polished surfaces, pneumatic and electrical lines, machine panels, or vehicle interiors. The patented, continuously adjustable dosing system operates reliably without any loss of compressed air. The working pressure ranges from 1 to 16 bar. The compressed air supply hose is 10 m long. The integrated flow system prevents freezing and subsequent clogging at the hopper outlet. The design of the tube and hose system prevents the pellets from breaking. The blasting gun is ergonomically shaped, robust, safe, and easy to use. An optional LED lamp is available for the blasting gun. The stainless steel frame and machine housing guarantee a long service life. The machine requires only minimal maintenance costs, even under the most demanding operating conditions. The stainless steel hopper has a capacity of 13 kg. The dry ice consumption is between 10 and 100 kg/h. Included accessories: - Round spray nozzle RN-10-08 - Flex Case II Plus nozzle case (14-piece) - External Module PAM-01 (7m hose extension) - M306 protective helmet (with comfort face shield) - Capsule hearing protection with helmet adapter - Length-adjustable air hose - Compressed air regulator with belt - 10m breathing air supply hose - Breathing air preparation unit - Ice scoop