Screw compressor

Atlas Copco G15FF

Condition: like new (used), Year of construction: 2022, operating hours: 175 h, functionality: fully functional, overall weight: 340 kg, fuel tank capacity: 500 l, volume flow: 1,994 m³/h, noise level: 67 dB, Atlas Copco G15FF screw compressor Specification: • condition - used • manufacturer - Atlas Copco • model - G15FF • capacity at 7.5 bar 1994 l/min • capacity at 10 bar 1740 l/min • main engine power - 15.0 kW • tank - 500 l • maximum operating pressure - 10.00 atm Fpodpfxjvkxrnj Afnsc • working hours under load - 175 mth • working hours - 715 mth • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) • meets CE standards • 2022 year of production • weight - 340 kg Additional information: • the machine is in excellent technical condition, ready for immediate use • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT and transport costs

Condition: like new (used), Year of construction: 2021, operating hours: 620 h, functionality: fully functional, Kaeser Aircenter SM13-11 screw compressor (2021) Manufacturer: Kaeser Type: Aircenter SM13-11 Year of manufacture: 2021 Condition: Very good, used Switch-on hours: 1356h Load hours: 606h Maintenance in 2825h Technical data Pressure 11 bar Effective delivery quantity 1.08 m³/min Nominal power drive motor 7.5 kW Protection class drive motor IP 54 Electrical supply 400 V / 3 Ph / 50 Hz Dimensions (WxDxH) 630x1200x1716 mm Weight 400 kg Compressed air tank 270 l Compressed air connection G 3/4 Sound pressure level 64 dB(A) Refrigeration dryer Power consumption 0.26 kW Pressure dew point 3 °C Fedpfx Afjxnnd Renepc Pressure loss 0.2 bar Refrigerant R 134a Energy saving control Yes Electronic condensate drain Eco-Drain Electrical equipment EN 60204-1 Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m supply cable with 32A plug

Condition: new, volume flow: 1,994 m³/h, noise level: 67 dB, type of cooling: air, pressure: 10 bar, type of input current: three-phase, tank capacity: 500 l, Equipment: documentation/manual, Atlas Copco G15FF screw compressor, brand NEW! Specification: • capacity at 7.5 bar 1994 l/min • capacity at 10 bar 1740 l/min • main engine power 15.0 kW • 500 l tank • maximum operating pressure 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) Additional information: • the photos shown show the actual condition of the item for sale Fjdpfxsq E Iraj Afnopc • possibility of switching on and checking the device on site. • meets CE standards • operating instructions in Polish and a complete set of documents for UDT • possibility of obtaining a manufacturer's warranty • available immediately or within 7 working days

Year of construction: 2025, condition: new, Automated pallet dispenser is the backbone of your automation processes. Loaded with up to 10 euro pallets (1200x800 or 1200x1200), it removes the need to prepare each pallet manually, saving time and reducing strain on employees. Instead, the unit dispenses pallets with a push of a button, or a pre-set algorithm onto a motorised roller conveyor, which transports them for further processing. PD-10 can be used in line with various palletising solutions. Fpedpfx Afohbg Uxsnec Fits up to 10 euro pallets Loaded up with a forklift Reduces physical strain Increases efficiency

Condition: refurbished (used), The reconditioned vacuum pump is available from stock and ready for immediate use. We recommend that it is only installed by trained personnel. Adaptation material available on request. Oil filling: M-VAC 100 Technical data: 50Hz / 5.5 kW / 11.5/6.6 A Final pressure with open gas ballast: 0.35 mbar Final pressure with closed gas ballast: 0.25 mbar Subject to prior sale! This offer is only valid for customers within Germany and in European countries! Fodpoq S N Iijfx Afnopc

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General description: Year of construction: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control: Fanuc 21i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations The machine does not have a life tool. Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: -Machine was completely dismantled, cleaned and repainted, The main spindle was re-supported -The guides and guide shoes were replaced in the X-axis and Z-axis -The ball screw in the X-axis and Z-axis was replaced -New unit for central lubrication and new hoses -Hydraulic unit was checked and serviced. Drive coupling between motor and pump was replaced -Cooling unit was checked and serviced: Temperature difference controller was replaced - Clamping cylinder was re-mounted and sealed. Fjdpfx Afotpu Szenjpc Gearbox of the A-axis was re-mounted and coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Control panel was replaced -New screen -New interior lighting -Turret was dismantled, wearing parts checked, cleaned and resealed -Cleaned turret encoder and encoder wheel -Length measuring systems in X-axis and Z-axis disassembled and cleaned -Pick-up station springs replaced -X-axis and Z-axis motors were checked for bearing damage -The windows on the work door were replaced. -The chip conveyor was completely dismantled, re-stored, cleaned and painted -Of course, various small parts of the machine were also replaced The product has been described by us with the utmost care. The description is non-binding and should be checked during an inspection.

Year of construction: 2016, condition: like new (used), Offered is a vertical turning-grinding center VLC 100 GT, with the retrofit construction year 2022. With the pick-up spindle unit, workpieces can be fed directly from the transport conveyor belt to the working area. Due to its modular design, the VLC 100 can be configured for a wide range of applications. The pictures show an example of a combination of turning tools (block steel holders) and grinding spindles for soft or hard machining (inside, outside). Depending on the workpiece or technology, these machining modules can be easily adapted. Fpsdjh Tm Duopfx Afnsc CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: max. 100 mm Workpiece height: max. 150 mm X-stroke: 605 mm Z-stroke: 530 mm POWER main spindle 18 kW grinding spindle 12 kW TOOL CARRIER 2x block steel holder VDI / Capto console with grinding spindle 12 kW, 60000 1/min Price, delivery time and equipment of the machine according to agreement.

Condition: used, Year of construction: 2011, A well-preserved EMAG laser welding machine with EMAG ultrasonic testing system including Laser Rofin type: DC 060 built in 2009 Without exhaust unit The machine used to weld gears with coupling rings. Diameter 60-80 mm. Weld depth 4-6 mm. * Fpodpfoixxqkox Afnec

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Showroom machine from the manufacturer! Ideal brochure production and collating Fpsdpfx Asu Dmrysfnjc -Built 2024 -Ideal brochures and collating line -12 stations in special format - 35 cm x 62 cm for A4 landscape brochure -Right-left run -Running to the right - brochure production -Running to the left - collating -Clocked guide plate - alignment of the sheets with each cycle -Motorized paper rail -Cover creasing unit -Automatic format adjustment of the following units -TRANS SFT 350 S & TRANS T20 S -Short-term delivery Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Validity of offer Subject to prior sales Detailed offer on request

Condition: new, overall weight: 340 kg, volume flow: 1.44 m³/h, Atlas Copco G11FF screw compressor Specifications: - condition - New - manufacturer - Atlas Copco - capacity - 1440 l/min - main engine power - 11,0 kW Fsdpfoh Unupjx Afnopc - tank - 500 l - maximum operating pressure - 10.00 atm - built-in refrigeration dryer - electronic setting of compressor operating parameters - soundproofed cabin (only 67 dB) - meets CE standards - weight - 340 kg Additional information: - possibility to obtain a manufacturer's warranty after commissioning by an authorized Atlas Copco service center - instruction manual in Polish and a set of documents for the Office of Technical Inspection - available immediately or within 7 working days