Screw compressor air compressor room

Atlas Copco Druckluft Kompressor GA75VSD GA45+ Kältetrockner + Tank

Condition: used, Year of construction: 1967, power: 21 kW (28.55 HP), * Working width of the cutting unit (cm)175 * Weight without cab (kg)1700 Kfedpfxovhvf Tj Aa Esa * Grain tank capacity (hl)6.5 * Type MF30-6 * Serial number 0D7758 * Year of construction 1967 ----Internal vehicle number 8144----Irrors and prior sale reserved

Condition: excellent (used), Year of construction: 2003, pressure: 13 bar, 1 fired steam boiler Kfedpfjuugi Sex Aa Esa ----- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 sqm Boiler capacity max. : 1.250 kg/h Operating overpressure : 13,0 bar increased test overpressure : 24.05 bar Water content at NW approx. : 993 l Water content full approx. : 1,365 l Year of construction : 2003 CE mark : 0036 equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250-1,550 kW, 15-500 mbar, gas control system, switch cabinet, feed water pump and the existing coarse and fine fittings. Econmizer: Eco 3, 82 kw, 31 bar, 238°C, 28 ltr.

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for log splitter, crane, mini excavator, tractor, viticulture, horticulture and many other applications. With the hydraulic attached winch, you can facilitate many applications: - Pulling firewood to the log splitter and setting it up - Pull logs onto trailers - Pull out rootstocks and trees - As a winch for backhoes and small excavators - As winch for small tractors and narrow track tractors A sturdy steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, this offers many possibilities for mounting the winch (threads are cut and painted.) The winch can also be used as a power winch. They need to be re-tapped with the tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar peak Kjdpodf Ufpefx Aa Esfa Continuous working pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg Rope speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: length: 500 mm length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Width bearing: + 30 mm Width motor: + 200 mm Height: 250 mm The winch is available for mounting or for welding on

Condition: excellent (used), Year of construction: 2013, Kaeser screw compressors - various models Kfjdpfeqcu Rcox Aa Esa

Condition: excellent (used), Between centres – 1000 mm Centre height – 311 mm Max swing over bed – 660 mm Max swing over cross slide – 618 mm Max swing in gap – 690 mm Bed width – 384 mm Spindle bore – 52 mm Spindle speed – 18 speeds from 32 to 1600 rpm Carriage travel – 156 mm Kedpfexcpbaex Aa Eofa Tailstock quill diameter – 82 mm Tailstock quill travel – 120 mm Machine weight – 2150 kg

Condition: like new (used), Year of construction: 2014, operating hours: 15,000 h, Atlas Copco compressor stage after refurbishment. Kjdsmzbdwepfx Aa Eofa

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Kedpfx Aasg A Hcuo Eefa

Year of construction: 2016, condition: excellent (used), I have 3 pieces. Brand: Multivac Model: R085 Type: Thermoformer Year: 2016 Production hours: 5,011 Power supply: 400V, 50Hz Power: 7 kW Kfedpfxowi E Rys Aa Eoa Film width: 420 mm Max. film thickness: Soft or hard film Max. forming depth: 80 mm Cut-off length: 240 mm Machine dimensions (L x W x H): 2,900 × 1,100 × 1,500 mm Machine weight: 700 kg. It is possible to make a tool with any division. Upper film brake with photocell. BUSCH Vacuum Pump We are able to make a new tool for each machine!!!

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Kjdpfx Aehx Elfja Eefa Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: used, Price: On request Overhead crane Abus Lifting capacity: 6300kg Lifting height: 7500mm Span: 19000mm Total crane weight: +/- 4000kg Be disassembled and prepared for transport by us. - Documentation available: No - CE certificate present: No Kfodpfx Aaewh Niqe Eja Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum