Laserstore GmbH

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry portal for coil system with Trumpf TCF 1 laser + GSW AG coil winder MHR 2.5 / 1250 + strip straightening machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 robot The system will remain in operation until calendar week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. output power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability in relation to rated power: ±2 % Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Coil winder MHR 2.5 / 1250 Load capacity: max. 2,500 kg Iedpfjzu Avzsx Aatjif Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Strip straightening machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rollers: 7 Number of tension rollers: 2 Roller diameter: 60 mm Straightening roller spacing: 130 mm Speed: approx. 15 m/min Working height above floor: approx. 1,000 mm Drive type: servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positional repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist swivel): ±200° B-axis (wrist bend): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: Siemens 840D, _____ Iisdpfxszuq Npj Aatef Description: Year of manuf. : 2014 Power : 3000 kW Technical Specifications Working area:X = 3,000 mm / Y = 1,300 mm / Z = 600 mm B-axis:135° C-axis:n × 360° Laser light cable:30 m LLK:0.10 mm Control system:Siemens 840D Teach panel:including teach software Equipment :- Safety enclosure with 1 window and a column for the control panel :- Safety cabin for the rotary changer :- Rotary changer, Ø 4,000 mm :- Extraction pipework :- Scrap conveyor belt :- Status indicator light at the top :- 2 × loading status lights for the rotary changer :- 4 × configurable control interfaces :- Anti-tripping guard Laser Nitrogen:present Oxygen:present Argon:not present Air:not present FastLine Cell:not present ObserveLine:not present Probe:not present

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 3,000 W, pipe diameter (max.): 210 mm, pipe length (max.): 6,000 mm, workpiece weight (max.): 800 kg, input voltage: 400 V, type of cooling: water, overall weight: 5,000 kg, total length: 12,000 mm, total width: 2,000 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, FOR SALE: High-Precision 3000 W Fiber Laser Tube Cutting Machine (6 m) Iijdpfx Aajzuf Dhstjf Industrial-grade 3 kW tube laser equipped with a side-loading system, a premium IPG YLS 3000 laser source, and a German LT Ultra bevel cutting head. A powerful and versatile solution for cutting round, square, rectangular, and oval tubes, as well as special profiles, with bevelling up to 45°. Machine origin & key details Loading system: side-loading Year of manufacture: 11/2017 (commissioned in Finland in 2018) Laser source: IPG YLS 3000 – 3000 W fiber laser, manufactured in the USA Bevel cutting head: LT Ultra-Precision Technology, manufactured in Germany Filtration: Welldone dust collector and filtration unit Key highlights Versatile tube profiles – round, square, rectangular, and oval tubes, plus open and custom shapes 3D bevel cutting – integrated bevelling up to 45° for high-precision weld preparation High speed & accuracy – max. operating speed 100 m/min, acceleration 1.0 G, positioning accuracy ±0.03 mm Heavy-duty capacity – tubes up to 6 m in length, max. load 800 kg Technical specifications Parameter Specification Laser power 3000 W (3 kW) Laser source IPG YLS 3000 (manufactured in the USA) Bevel cutting head LT Ultra-Precision Technology (manufactured in Germany) Filter / dust collector Welldone Loading system Side-loading Year of manufacture 11/2017 (commissioned in Finland 2018) Max. material length 6000 mm (6 m) Round tube diameter Ø 20 – Ø 210 mm Square / rectangular tube size 20 × 20 mm – 150 × 150 mm (any side) Bevel cutting angle ≤ 45° X/Y positioning accuracy ±0.03 mm X/Y repeat positioning accuracy ±0.02 mm / 1000 mm Cutting gap width 0.1 – 0.2 mm Max. operating speed 100 m/min Max. acceleration 1.0 G Max. loading capacity 800 kg Machine weight 4000 kg Machine dimensions (L × W × H) 12 000 × 2500 × 1900 mm Gross power < 40 kVA Power supply 380 V ±5 %, 50 Hz Operating temperature / humidity 0 – 40 °C / < 90 %

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,889 h, laser power: 2,000 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, The machine has been very well maintained, regularly cleaned, and serviced. It is in near-new condition! TECHNICAL DETAILS Laser power: 2,000 W Laser source manufacturer: IPG Laser type: Fiber laser Iijdpfx Aaezt R R Rstef Max. sheet thickness: 15 mm Max. steel sheet thickness: 15 mm Max. stainless steel thickness: 8 mm Working length: 3,000 mm Working width: 1,500 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Control type: CNC control Control manufacturer: Mazak Cooling type: Water Degree of automation: Automatic Drive type: Electric Input voltage: 380 V Input current type: Three-phase Laser on-time: 8,212 h Cutting hours: 1,657 h Year of last overhaul: 2024 EQUIPMENT CE marking Documentation / manual Safety light curtain Shuttle table Extraction system

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Press force: 300 t Bending length: 4050 mm Distance between uprights: 3550 mm Control system: EHT EPS D01-3D Total power requirement: 30 kW Machine weight (approx.): 24,000 kg Machine height: 3.60 m Operating hours (approx.): 12,000 h Accessories/Equipment: Rear back gauge system, 5-axis Travel range and back gauge area Travel range X-axis: 600 mm Max. back gauge range in X: 1000 mm Ijdpfozt R A Hsx Aatoif Travel range X1-axis: ± 125 mm Travel range R-axis: 200 mm Travel range Z-axis: 3150 mm Accuracy Positional deviation of the axes X-axis: 0.02 mm X1-axis: 0.02 mm R-axis: 0.05 mm Z-axis: 0.05 mm Speeds X-axis: 1200 mm/s X1-axis: 300 mm/s R-axis: 200 mm/s Z-axis: 1200 mm/s

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, input voltage: 400 V, input current: 125 A, input frequency: 50 Hz, compressed air connection: 10 bar, overall weight: 11,700 kg, total length: 9,229 mm, total width: 6,145 mm, total height: 2,200 mm, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, safety light barrier, We offer this used TRUMPF TruLaser 3030 laser cutting machine, manufactured in 2007. Laser power: 3200 W Machine no.: A0220A1818 Year of manufacture: 2007 Power supply: 400 V / 50 Hz Connected load: 73 kVA Iodjzt I U Hopfx Aatjif Control voltage: 24 V Required fuse rating: 3 × 125 A Compressed air connection: 7–10 bar Nitrogen connection N₂: 30 bar Oxygen connection O₂: 20 bar If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2006, Year of manufacture: 2006 Maximum clamping force: 1700 kN / 170 t Maximum stroke: 350 mm Weight: 14,800 kg Serial number: HFT 170-4 L N060097 Iisdpfxozt Iido Aatjf

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Weight (kg) 1000 Ijdpfezt A H Rex Aatoif Length (m) 2.3 Height (m) 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. The machine is in very good technical condition. The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland.

Condition: repair required (used), functionality: not functional, Year of construction: 2007, operating hours: 134,409 h, machine/vehicle number: A0270A0124, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: Siemens, laser hours: 51,652 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, year of last overhaul: 2023, Equipment: documentation/manual, TRUMPF TRULASER 5060 CO₂ Laser Cutting Machine – 6000 W TRUMPF TRULASER 5060 – 6000W CO₂ Laser – Year 2007 – To be recommissioned Brand: TRUMPF Model: TRULASER 5060 (CO₂ Laser) Laser power: 6000 W CNC control: Siemens Serial number: A0270A0124 Year of manufacture: 2007 Technical specifications • Beam operating hours / cutting time: 134,409 h • Laser operating hours under power: 51,652 h • Maximum steel thickness: 25 mm • Dimensions: 10,300 x 3,820 x 2,550 mm • Weight: 16,500 kg Standard equipment: - TruFlow 6000 W resonator - HI-LAS high-pressure cutting - Cutting heads with 7.5’ and 10’ lenses - Quick-change cutting head device - Automatic sheet edge detection - Capacitive profile follower and APC process control - Positioning laser diode - Programmable cutting gas pressure - Programmable power cycle - Oil vaporization device - PCS (Process Control System) - Plasma line and LLS (laser power control) Iodpfoztb Elex Aatsif - Sprint Line - Contourline - Modem and remote diagnostics - Focus Line - Laser logbook - Automatic pallet changer - Work area lighting - Automatic nozzle cleaning - Conveyor for small parts and scrap - Multiple suction box - Suction device and dust collector - Automatic stop - TFT color screen - 3.5’ floppy disk drive - TruTops laser lite - RJ 45 network card - Safety device Including: air cutting, 3.5’ laser head with high speed, Load Master preparation, additional post-processor Machine condition The machine was in operation until 2023. The laser source and optical path maintenance have been regularly performed by TRUMPF. Technical inspections and preventive maintenance operations have also been carried out annually by the manufacturer. The machine is currently shut down and requires repairs before recommissioning, including pipe replacement. A detailed quote for the repairs and parts to be replaced has been prepared by TRUMPF and can be provided to serious buyers. The overall condition of the equipment requires, at a minimum, the acquisition of the spare parts mentioned in the manufacturer’s offer in order to restore satisfactory production conditions. Sales conditions • Immediate availability • Sold as is • Disassembly, loading, and transport are the responsibility of the buyer • Documentation and repair quote available upon request This machine represents an excellent opportunity for a company with the necessary technical skills to restore it or seeking a machine base for spare parts. For any further information or to arrange a visit, please contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, operating hours: 4,000 h, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: trumpf, laser hours: 15,231 h, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 300 m/min, feed rate Y-axis: 300 m/min, feed rate Z-axis: 250 m/min, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 100 mm Iijdpfoztad Hjx Aatsf Laser power: 5,000 W Laser unit: CO2 laser TLF 5000, high-frequency excited, replaced two years ago Maximum workpiece weight: 900 kg Positioning speed (X/Y): 200 m/min Simultaneous positioning speed (X+Y): 300 m/min Maximum steel sheet thickness: 25 mm Maximum stainless steel sheet thickness: 25 mm Maximum aluminum sheet thickness: 15 mm MACHINE DETAILS Electrical operating hours: 39,836 h Cutting hours: 15,231 h Control model: Siemens Sinumerik 840D Control features: Open PC-based control system Online support Diagnostic functions Maintenance log Technological data Remote support Safety equipment: Multi-beam photoelectric barriers and safety enclosure Fully enclosed optical guide with nitrogen ventilation Surveillance system Multi-zone extraction and compact dust filter Paint: white RAL 9002 / gentian blue RAL 5010 Drives: Gantry drive combined with direct linear motors OTHER FEATURES Cooling unit Logbook function Automatic pallet changer Laser power control HI-LAS high-pressure cutting PMS plasma sensor Programmable power cycles Programmable cutting gas pressure adjustment Laser cutting head with 5", 7.5", 9" and 3.75" lenses Quick-change system for cutting heads Automatic sheet edge detection Capacitive height control and APC process control PCS Upon request, a quotation can be provided for disassembly and preparation for transport.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 63,000 h, laser type: fiber laser, laser hours: 48,000 h, laser power: 3,000 W, Equipment: CE marking, documentation/manual, Model: TruLaser 5030 fiber (L41) Year of manufacture: 2013 A new cutting head was installed in 6/2026! Machine hours: 63,000 machine hours, 48,000 laser hours Working area: 3000 x 1500 mm Standard equipment Machine • Enclosed machine frame • Torque drive in combination with linear direct drives • Enclosed beam guidance via fiber optic cable • Machine cooling unit (water-air) • Integrated control cabinets with interior lighting • Automatic pallet changer in the longitudinal direction • Wide longitudinal conveyor belt • Power supply for TruDisk via the machine • Work area lighting • Positioning laser diode • Spray device • PierceLine • FocusLine • NitroLine • PlasmaLine • Automatic nozzle cleaning TRUMPF Laser • Solid-state laser TruDisk 3001 with one fiber optic cable outlet • Fiber optic cable according to standard layout • Laser cooling unit (water-air) • Excitation via pump diodes Ijdpfx Aezrxdveatjif • Laser power control • Laser logbook function Cutting head • Universal cutting head with fully adaptive lens system • Protective glass against lens contamination • Condition monitoring of the protective glass • ControlLine: Height control and sheet edge detection Control system • Control system SINUMERIK 840D SL • 17" touch color screen • Simple workshop programming • Advanced workshop programming • Fast reproduction • Integrated technology data • Automatic shutdown • FastLine • AdjustLine • Teleservice via internet data transmission • USB interface • RJ-45 network connection Safety • CE marking • Light curtains • Multi-chamber extraction system • Integrated compact dust extraction system • Fire alarm system in the compact dust extractor • Machine enclosure, certified viewing window, door on the right • Electric roll-up roof

Condition: good (used), Year of construction: 2014, functionality: fully functional, Immediately available, maintenance and safety inspection new as of July 30, 2026! Description Year of manufacture: 2014 Bending length [mm]: 1020.00 Press force [tons]: 36 Control system: TRUMPF TASC 6000 Standard equipment Machine - Stable machine frame - Press beam - Highly dynamic, electromechanical direct drive (torque motor) - Inductive length measuring system with temperature compensation - Switch cabinet air conditioning - Ergonomic machine design Iodpjzrwntsfx Aatoif Back gauge system - Rear back gauge system, 6 axes Tool clamping - Upper tool clamping, automatic - Lower tool clamping, automatic Control system - TRUMPF TASC 6000 integrated - Numerical workshop programming - Windows XPe (embedded), Pentium M with 1.1 GHz clock frequency - 1 GB RAM - 15-inch touch screen Safety - Laterally pivoting safety doors - Protective cover at the rear - 2-button foot switch, for standing and seated operation - Rear back gauge system, 6 axes Ergonomics package: - Comfort support table (front) - Comfort footrest - Work area lighting front and rear (LED) - 2 document holders - 2 storage consoles - 1 measuring tool storage Productivity-Plus package: - Graphical workshop programming - Automatic tool clamping - BendGuard (with block laser) - Swiveling control panel - Bending line laser - Seat and standing aid - OCB – Operator Controlled Bending

Condition: good (used), functionality: fully functional, Machine type: Tube laser cutting machine Manufacturer: Trumpf Model: TruLaser Tube 5000 Year of manufacture: 2008 Dimensions: approx. 16 m x 8.2 m x 2.8 m Weight: approx. 17,000 kg Condition: ready for operation (used) Operating hours: 95,473 / 32,866 h (laser on / beam on; as of June 24, 2026) Main drive: 62 kW Laser power (max.): 2000 W Sheet thickness steel (max.): 8 mm Sheet thickness stainless steel (max.): 4 mm Sheet thickness aluminum (max.): 2 mm Travel range X-axis: 6,500 mm Travel range Y-axis: 200 mm Travel range Z-axis: 150 mm Tube diameter (round): 15 mm - 152 mm Tube diameter (square): 20 x 20 mm - 120 x 120 mm Tube diameter (rectangular): 20 x 20 mm - enveloping circle diameter x 150 mm Working length (automatic loading): 3,000 - 6,500 mm Working length (manual loading): Max. 7,500 mm Minimum remaining tube length: 141 mm Control: SIEMENS Sinumerik 840D Maintenance: Annual service by Trumpf HF driver stage renewed (09/2025) Push feeder renewed (07/2023) Isdpezrt Uisfx Aatoif Equipment: LoadMaster Tube 6.5 m Layout plan (German) Operating manual (German) Stable machine frame with integrated laser unit Rotating and feeding station with self-centering clamping jaws Tube support, raw material with automatically retractable tube supports Push feeder with self-centering parallel clamping rollers High-precision drives Unloading station PRS 3001 with brush table, finished part length up to 3,000 mm Tube support, finished material with extendable guide rollers Closed beam guidance NitroLine (nitrogen is used as cutting gas) SprintLine (optimization of processing speed) Laser power control Programmable cutting gas pressure Automatic shut-off Work area lighting CO2 laser TruFlow 2000 High-frequency excitation Maintenance-free turbo radial fan Laser control TASC 3 Logbook function Laser cooling unit Laser cutting head with 5" lens Cutting head quick-change device ControlLine (collision protection) RJ45 network connection and floppy disk drive CE marking Multi-beam light barriers Monitoring system for gas pressure, temperature and coolant Extraction system, Handte Micropore filter type MF-L Protective cabin with Makrolon panes Nozzles 0.8, 1.0, 1.4, 1.7, 2.3 Clamping jaw sets D 20-85 mm and D 85-150 mm V-shaped molds and guide rollers for round tubes Additional set for U-shaped molds and guide rollers up to enveloping circle diameter 90 mm instead of the standard 120 mm Scrap conveyor with container Loading unit for laser cutting machine Loadmaster Tube 5000 Year of manufacture 2008 Dimensions approx. 2.0 m x 1.95 m x 9.5 m Weight approx. 5,500 kg Ready for operation (used) 3,000 - max. 7,500 mm SIEMENS Simatic Annual service by Kaste

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: 7520536, input voltage: 110 V, input current: 20 A, input frequency: 60 Hz, Metal stamping machine for sale, running conditions. Iisdpfezrkumsx Aatef

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser type: CO₂ laser, laser power: 5,000 W, Equipment: cooling unit, nozzle changer, - Laser power: 5000 watts. - Year of manufacture: 2010 - Thin sheet productivity package Iedpfx Aaezq S Edsteif - Nozzle changer - Transverse conveyor - Tilting container for transverse conveyor - LiftMaster Store - Extended sorting system (1000 x 600) - Extended part removal for parts from 600 x 600 - Integrated sheet alignment - Single-sheet separation - Sliding gate, two-leaf - SortMaster - Rotating unit + extended part removal 1000 x 600, infinitely adjustable - Additional gripper for long parts - Extended magnetic suction system - TruStore 1030 - Infeed/outfeed station with trolley - 10-level compartment, 90 mm + pallet - 5 pallet bases - Column cladding - Storage interface

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,314 h, DG Tech – Authorized BLM Group Inspection Center In partnership with BLM Group, we manage the evaluation, purchase, and refurbishment of machines, including laser source maintenance, ensuring high-quality standards. We handle logistics, disassembly, and transport directly, eliminating the risks associated with private sales. We provide dedicated software, technical training, and after-sales support. We also offer flexible operating lease solutions to optimize investment and productivity. Thanks to our experience in after-sales service and continuous technical training, we offer a comprehensive and reliable service. LTFIBER load 6500 – delicate tube kit – 6500 – laser YLS 2000 discharge 6500 – suction chiller – tube kit up to 6" diameter – open profile integration – welding search – optimization of material utilization and bar management without breakage – powder micro-doser. Iedpfjzqzz Iex Aateif

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 8,065 h, machine/vehicle number: 8008, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BECKHOFF, laser type: fiber laser, laser source manufacturer: nLight, laser source model: 15000, laser power: 15,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, table length: 25,100 mm, table width: 3,100 mm, table height: 900 mm, working length: 25,100 mm, working width: 3,100 mm, working height: 900 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.35 mm, workpiece weight (max.): 24,750 kg, type of cooling: water, overall weight: 55,000 kg, warranty duration: 6 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, We are offering for sale a state-of-the-art NUKON EXTREME LARGE laser cutting machine from 2022, equipped with a 15 kW nLIGHT fiber laser source with Corona technology, CNC control, and Beckhoff drives. The machine is in continuous production use, fully operational, and available for viewing during operation. This solution is designed for the most demanding production facilities engaged in cutting large-format parts, steel structures, and thick sheets. Technical data: Manufacturer: NUKON Model: Extreme Large 30250 BEVEL Year of manufacture: 2022 Laser power: 15 kW Laser source: nLIGHT Fiber Laser with Corona technology Working area: 3000 × 25000 mm Cutting head: BEVEL – bevel cutting up to ±45° CNC control: Beckhoff Servo drives: Beckhoff Equipment and advantages: - High-performance nLIGHT laser source equipped with Corona technology, enabling dynamic adjustment of the laser beam characteristics depending on the material type and thickness, resulting in higher edge quality, faster piercing, and increased production efficiency; - Professional Beckhoff control and automation system, valued for its speed, precision, and reliability in industrial applications; - BEVEL cutting head, allowing for the execution of welding bevels without the need for additional processing; - Ability to cut large-format sheets up to 25 meters in length; - High dynamic performance and excellent cutting quality; - Ideal for the production of steel structures, components for heavy industry, energy, offshore, shipbuilding, and machine manufacturing. Technical condition: The machine was commissioned in 2022 and has been in operation at a production facility ever since. It is regularly serviced, is in very good technical condition, and is still in use, allowing for the possibility of conducting tests and viewing the machine during operation in production. The buyer has the opportunity to perform their own cutting tests and thoroughly check all the functions of the device before purchase. Upon request, we can provide additional photos, videos of the machine in operation, and a complete technical specification. We invite you to contact us for detailed information and to arrange a demonstration of the machine. Iodpfxozphkmj Aatsif PRICE: 300,000 EUR

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 122,892 h, Equipment: documentation/manual, We recommend a personal inspection to discuss the machine's details in greater depth. Ijdpfxszpd Dco Aateif

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Available from September/October. Iiedpszn N Hgjfx Aatsf Operating hours: approx. 64,000 hours.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm Iiedoznwu Sjpfx Aatof - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: used, functionality: fully functional, operating hours: 28,922 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bystronic, controller model: ByVision, laser type: fiber laser, laser source manufacturer: MaxPhotonics, laser hours: 9,467 h, laser power: 8,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 169 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 890 kg, type of input current: three-phase, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, Bystronic ByAutonom 3015 – Fiber laser cutting machine (retrofit 2024) A very complete and production-ready flatbed laser cutting machine from Bystronic. Built in 2014, it was fully converted in 2024 from CO2 to a modern 10 kW fiber laser (MaxPhotonics), including CE declaration for the conversion. The machine is currently in production and combines the robust Bystronic platform with an automatic pallet changing system and a high degree of automation with the speed and low operating costs of fiber technology. Technical specifications: • Brand / model: Bystronic ByAutonom 3015 • Year of manufacture: 2014 – fiber retrofit 2024 (with CE declaration) • Laser technology: fiber 10 kW – MaxPhotonics • Cutting head: RayTools BS08K smart cutting head with autofocus • Working area: 3,000 x 1,500 mm • Pallet changer: automatic pallet changing system, changing time approx. 22 s, load capacity 890 kg per pallet • Cutting capacity: steel up to 25 mm (O2, up to 40 mm possible), stainless steel up to 25 mm (N2), aluminum up to 20 mm, brass up to 20 mm • Dynamics: simultaneous 169 m/min, acceleration 30 m/s² • Accuracy: position deviation 0.1 mm/m, repeatability accuracy 0.05 mm • Control system: Bystronic ByVision with 22" touchscreen • Operating hours: approx. 28,922 hours machine / approx. 9,467 hours laser production Iiedpfx Aaeznt I Uotsf Equipment / options: Automatic nozzle changer (40 positions), automatic nozzle centering with collision detection, filter system (DFPRO 6-3000), conveyor belt for scrap and small parts, extra laser protection windows front and side. Included: All documentation (digital), support & assistance, certified pre-purchase inspection, webshop with discount account. Optional (turn-key delivery possible): Dismantling, transport (including insurance), installation, base plates & anchoring, CAD/CAM software (advanced), extended warranty, smart factory connection, machine & software training, FastCal calculation software and portal. Interested in this machine? Please contact us for more information, a viewing, or a price indication.

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 6,000 W, laser wavelength: 1,020 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, table length: 3,050 mm, table width: 1,525 mm, working length: 3,050 mm, working width: 1,525 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, documentation/manual, dust extraction, emergency stop, Compact, reliable and available directly from stock The SENFENG SF1530NP is a fully enclosed fiber laser cutting machine designed for manufacturers looking for a reliable, high-performance solution in a compact footprint. Built with a heavy-duty machine frame and premium industrial components, it is engineered for continuous production and long-term reliability. Available directly from stock from early September. Iiodpjzni R Esfx Aatsf Why choose Besten Machines? A fiber laser is a long-term investment. That's why we don't just supply a machine—we provide a complete solution including installation, training, service and maintenance. ✔ Over 25 years of experience in sheet metal processing ✔ Locations in the Netherlands and Germany ✔ Our own Dutch and German service engineers ✔ Installation, maintenance and technical support carried out by our own team ✔ Extensive spare parts inventory ✔ Live demonstrations and cutting tests in our showroom ✔ Personal support before and after your purchase ✔ More than 70 SENFENG machines successfully installed While many suppliers simply sell machines, we support our customers throughout the entire lifecycle of their investment—from initial consultation and installation to preventive maintenance and technical support. Premium Machine Configuration At Besten Machines, we deliberately supply the SF1530NP with a higher-specification configuration than the standard factory version. This results in improved reliability, better cutting performance and lower operating costs. Our configuration includes: Technical Specifications • Working area: 3000 × 1500 mm • Laser power: up to 6 kW • Fully enclosed Class 1 safety enclosure • BOCI BLT442 autofocus cutting head • FSCUT4000E control system • CypCut software • Heavy-duty welded machine bed • SMC proportional gas valves • Aerospace-grade aluminum gantry • BOCI servo drive system • Available with Max Photonics or IPG laser source • Local Service in the Netherlands & Germany • With locations in Haarle (The Netherlands) and Büren (Germany), Besten Machines operates its own sales, service and demonstration facilities in both countries. Our Dutch and German service engineers provide: • Installation and commissioning • Operator training • Preventive maintenance • Emergency breakdown support • Technical assistance • Spare parts support This ensures fast response times, direct communication and support from experienced engineers who understand both your machine and your production process. Available from Stock This SENFENG SF1530NP is available directly from stock from early September. Contact us today to schedule a live demonstration, request a test cut or receive a no-obligation quotation.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on time: 12,577 hours Laser on time: 68,745 hours including Sheetmaster Iisdpfx Asznir Ajatef

Condition: excellent (used), Year of construction: 1998, Hours: approx. 45,600 Iisdezniq Ejpfx Aatsf 6 axles Location available upon request.

Condition: used, Tube ends – forming machine BLM (Italy) Iiodpfsznc Tgox Aatsf used tube end forming machine BLM for tubes with six-position turret Drive power: 7.5 kW max. tube diameter approx.: 40 mm Max. forming length estimated: 80 mm Weight approx.: 1.5 t