Metternich Fördertechnik

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Type: PS 2 Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Connection load: 5,0 kW. Spannung: 400 V, 50 Hz Ppjdpjyx Dx Iefx Acvjp Condition: very good, like new Remark: Very few operating hours

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Pjdpfx Ajyx Dxujcvopp Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Ppsdoyx Dw Djpfx Acvop Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Podpjyx Dwkjfx Acvepp Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, LICHTER LRK 200 PVC PIPE HEAD FOAM CORE PIPE HEAD - THREE-LAYER Application: PVC FOAM CORE PIPES KG-U PVC pipes Accessories: Tools for the production of pipes in diameters from 100 mm to 200 mm The pipe head was only lightly used due to shutdown of operations. Ppsdeyxtnrepfx Acvep Condition: in very good condition Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Germany

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, 2 VON HEIN 160 pipe saws Year of manufacture: 1995 and 1996 With chipping jaws Application: Cutting and chamfering Smallest diameter: 30 mm Largest diameter: 160 mm For PE, PP, and PVC pipes Also suitable for short lengths from 10 mm Condition: Very good, the pipe saws are ready for use Psdeyxqlnopfx Acvopp The saws are my property Location: Sachal Extrusionsmaschinen, Bahnhofstr. 6 D-26345 Bockhorn-Grabstede, Germany

Condition: good (used), Year of construction: 1994, Model: NE 12 Screw type: Single screw Year of construction: 1994 Screw diameter: 130 mm L/D ratio: 30 L/D Drive power: 350 kW Including: • Machine was in production when dismantled • Machine was producing 710 mm pipes • Output on HDPE approximately 1,000 kg/hour • 800 mm extrusion head Ppedpfx Ajyxpbuecvop

Year of construction: 2013, condition: good (used), Brand: Krauss Maffei Technologies GmbH Model: KME 38-30 Screw type: Single screw Ppodpfjyxn U Tex Acvjp Year of construction: 2013 Screw diameter: 38 mm L/D ratio: 30

Year of construction: 2008, condition: good (used), This extruder line from Kuhne is in machine storage at Plastima Used Machinery. The machine is from 2008 and in excellent condition. Brand: Kuhne GmbH Model: K 60E - 33D Screw type: single screw Year of construction: 2008 Screw diameter Ø: 600 mm Pjdpfxoyxn T Ns Acvepp L/D ratio: 33 Cylinder height: 425 mm Cone height: 325 mm Total height: 750 mm

Condition: good (used), TWIN SCREWS for WEBER DS105.17D EXTRUDER Application: PVC PIPES Ppedsywr Tdopfx Acvep SCREW NUMBER: 014.185605 r.920 S

Year of construction: 1995, condition: ready for operation (used), A Lenhard extruder for butyl rubber is available. Application: insulating glass production, material: thermoplastic butyl based on polyisobutylene, max. operating temperature: 140°C, max. butyl pressure: 140bar, max. hydraulic pressure: 150bar. An on-site inspection is possible. Pedpfsyv H H Aox Acvopp

Year of construction: 1993, condition: ready for operation (used), A counter-rotating side-feed twin-screw extruder Krauss-Maffei used in the coextrusion process is available. Screw diameter: 40mm, material: rigid PVC, screw speed: 50rpm, throughput capacity: approx. 50-80kg/h, operating hours: approx. 42100h. Including roller guide with subframe. Documentation available. An on-site inspection is possible. Ppjdpfx Aceyvix Usvjp

Year of construction: 2001, condition: good (used), Brand: Collin Pilot & Lab Solutions Model: P200P Pedpfx Asyub T Tscvjpp Year of construction: 2001 Plate size: 200 x 200 mm Max. pressing force: 196 kN

Year of construction: 1999, operating hours: 16,484 h, condition: good (used), Brand: Collin Lab & Pilot Solutions GmbH Extruder model: E 30 M Low Boy Pjdpfxeyub Rle Acvepp Screw type: Single screw Screw diameter: 30 mm L/D ratio: 25 mm Operating hours: 16,484 h

Year of construction: 1999, operating hours: 17,620 h, condition: good (used), Brand: Collin Lab & Pilot Solutions GmbH Extruder model: E 30 M Low Boy Screw type: Single screw Screw Ø: 30 mm L/D ratio: 25 mm Ppsdpfxjyub Nbo Acvop Operating hours: 17,620 h Year of manufacture: 1999

Year of construction: 2000, condition: used, General Technical Description: The Macchi 3-Layers is a three-layer blown film co-extrusion line designed for the production of high-quality tubing and sheeting films. The line is capable of processing LLDPE, LDPE, mLLDPE, MDPE, and HDPE. Film production utilizes an upward bubble-up working principle. The machine is equipped with a 350 mm 3-layer die head and delivers an output capacity of up to 450 kg/hour. EXTRUSION GROUP: Extruders: 65 mm + 80 mm + 65 mm • Infrared heating zones • Hydraulic screen changers The Coexflex Size 3 extrusion group includes: – Two high-performance extruders 65/30D (layers A and C) – One high-performance extruder 80/30D (layer B) – Bimetallic barrels – Nitrided, high-mixing screws – Water-cooled grooved feed sections – AC motors with digital frequency converters (74 kW for 65 mm, 100 kW for 80 mm) DIE HEAD: • Model TE502 • 350 mm diameter, die gap 1.8 mm • IBC (Internal Bubble Cooling) • Electroless nickel-plated flow channels • 4+4 ceramic heating zones • Mounted on a die cart with integrated air distribution manifold COOLING SYSTEM: • Dual-lip Plast-Control air ring • Coexflex version includes Double Flux Cooling Ring ASR3, with inverter-driven blower and interchangeable inserts TAKE-OFF UNIT: • Take-off width: 1800 mm • Oscillating nips • Side gusseting capability WINDING SECTION: • Double automatic back-to-back winder • Fully automatic roll change • Maximum winding width: 1750 mm • Cardboard core diameter: 76 mm FILM SPECIFICATIONS: Film widths achievable with 350–400 mm die: 1300–1700 mm Thickness range: 18–200 μm Output example (Coexflex specs): 1600 mm width, 100 μm LDPE → 400 kg/h LINE SPECIFICATIONS: • Total line height: 10 m • Mechanical winder speed: 7–110 m/min • Installed electrical power: 320 kW, 415 V, 3-phase + neutral • Cooling water consumption: 6 L/min • Compressed air requirement: 6 bar AUXILIARY EQUIPMENT: Pjdpfx Aeyt Ikvocvepp • Tower • E+L web guiding system • Piovan gravimetric weight control • Piovan Quantum dosing units • Plast-Control automatic thickness control • Calibrating basket • Corona treater (Ferrarini & Benelli) • FBF cold-needle micro-perforation • Air shafts (8 pcs) This translation uses precise, industry-standard terminology suitable for machinery and equipment descriptions on professional trading platforms.

Year of construction: 2011, condition: excellent (used), SÄGE SICA TRS/C/SY/U/CNC. 32-250 , PLANETARY TUBE SAW Central clamping for pipe fixing Application: Cutting and Chanfering of PVC, PE, PP PIPES With chip extraction fan Minimum diameter 32mm Ppjdpfx Acsyru Eqsvop Max diameter 250mm Year of construction 2005 Machine locations: Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 The machine is my property.

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, Extrudex Extruder complete line with UWG (underwater pelletizer) Technical data: Output: 300–500 kg/h, depending on feed material Year of construction: 1995, but completely overhauled in 2018 and in as-new condition since then Included in the line: Extruder Complete control system Sieve changer "Kreyenborg" K-SWE 150 Ekochem RW-400 underwater pelletizer + WP-220 centrifuge Vibrating screen (classifier) Storage hopper (10 cbm) Chiller for water (cooling capacity: 80 kW) Psdpfx Asyrn Rtocvjpp Various smaller peripheral devices Sale is also possible without the underwater pelletizer, alternatively with strand die, water bath, and strand pelletizer.

Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 200 mm, rotational speed (max.): 3,000 rpm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder! Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit! Hussmann ES35 x 30D TECHNICAL DETAILS Screw diameter: 35 mm Length: 30D MACHINE DETAILS Ppjdpfxeyrmzqe Acvop Motor power: 16 kW Operating hours: 297 h Cutoff Saw TECHNICAL DETAILS Three-phase motor speed: 3,000 rpm Three-phase motor output: 0.55 kW Saw blade diameter: 200 mm Haul-off Unit TECHNICAL DETAILS Haul-off speed: 20/30/40/50/60 m/min Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N Contact length: 800 mm Max. belt width: 160 mm Max. profile height: 160 mm MACHINE DETAILS Drive power: 2 - 5.6 kW Weight: 800 kg EQUIPMENT Complete electrical and electronic control system with remote control box Digital speed display Ammeter 10-step helical potentiometer

Operating hours: 54,000 h, condition: ready for operation (used), functionality: fully functional, CINCINNATI PROTON 60-30G Screw diameter: 60 mm, L/D = 30 Grooved feed section Throughput: approx. 450 kg/h PE Motor (DC drive): 163 kW Screw speed: max. 221 rpm Tool zones: 5 pcs + 1 pc for adapter Melt pressure & temperature sensors included Control system: Cincinnati EXc Pro-NT Cylinder in bimetal design – condition: good Screw with wear-protection and hardened feed section – condition: good Dimensions (L x W x H): 2,580 x 1,430 x 1,800 mm Weight: 2,500 kg Pjdpfeyrihgox Acvepp

Year of construction: 2012, condition: used, functionality: fully functional, MACCHI CO-EXTRUSION BLOWN FILM LINE 3 LAYERS Complete line for the production of 3 layers blown film Materials that can be processed LLDPE, LDPE and HDPE Width max 2400 mm Nº3 Extruders with screw diameter 65mm / 80mm / 65mm Co-extrusion Die-head diameter 350 mm and 400 mm, with IBC Oscillating take off Double winder back-to-back with automatic roll change Reel diameter max. 800 mm Thickness control Kundig/K-Design Dosing units Piovan and Doteco Corona treater Martignoni Web guide Calibrating basket Tower Ppodoypkhcspfx Acvop Year 2012

Year of construction: 1997, condition: used, Twin-track saw/combination BASTON/VOBAU Year of manufacture 1997 Ppedpoyl I Ekofx Acvep Model GB 1070 A Tracks in very good condition Very robust trigger

Year of construction: 2009, condition: ready for operation (used), Milacron PAK Series of Single Screw Extruder Systems gives all the advantages for productive operation. Standard AC motor & drive package. Double reduction gear reducer with heavy duty integral roller trust bearing for extended life. Large cast-in water jacket in feed throat for efficient cooling. Bimetallic barrel with rupture disc for long life. 4-Bolt swing gate for faster die changeover. Standard discrete control package or optional Mosaic microprocessor control. Analog melt temperature and melt pressure indication. Production Smooth Bore (PAK) model Grooved Feed (G-PAK) extruders 150mm. Pak 600 (150mm) extruder Year 2009 Gamma Mechanica wet face cutter and dryer Year 2012 Gamma Screen changer Reglochill water chiller Specification Metric Model PAK 600 Screw Diameter 152.4 Ppsdpfx Acsylzf Devep Screw Ratio 30:1 Max. Melt Pressure Continuous 680 Gear Box Rating 800 Gear Ratio 17.5:1 Screw Speed based on Gear Ratio 100

Condition: good (used), Year of construction: 1989, machine/vehicle number: NE 60 053, Brand: Hans Weber Type: NE 60 Serial No.: NE 60 053 Year of manufacture: 1989 Ppodpfx Acsylv A Rsvep

Condition: excellent (used), functionality: fully functional, Brabender Single Screw Extruder 30 mm – 30 L/D – with K-Tron Twin Screw Feeder – Strand Die For sale is a fully functional Brabender single screw extruder in a compact design, ideal for laboratory, development, or small-scale production applications. Technical Data: • Manufacturer: Brabender • Screw diameter: 30 mm • Process length: 25 L/D • Drive: 5.5 kW • Multi-zone heating system (5 zones) • Compact control cabinet with digital temperature control • Strand die adapted Features: • K-Tron twin screw feeder • Compact, clearly arranged control unit • Multiple heating zones with individual control • Melt temperature & melt pressure monitoring Pjdpfsyi Am Rjx Acvjpp Condition: • Fully functional • Well-maintained overall condition • Ready for immediate use A trial run with customer material is available upon prior arrangement.