Naplast Im- u. Export GmbH

Condition: ready for operation (used), Year of construction: 2008, 1,0 piece injection molding machine with robot Manufacturer: DEMAG Type: IntElect 150/520-410 Year of manufacture: 2008 Clamping force: 150 tons Tie bar spacing: 520 x 520 mm Ibedpfxoz Dibme Akpob Screw diameter: 35 mm Injection volume: 166 cm³ Shot weight: 146 g/shot Equipment: Part removal robot, manufacturer: Wittmann, type: W721, year of manufacture: 2006 Travel distances: Y = 550 mm, Y = 1,200 mm, Z = 2,000 mm 2 x core pull Safety fence

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Iedpfx Akoz Dhnrspebb Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,265 h, clamping force: 1,600 kN, screw diameter: 35 mm, overall weight: 8,700 kg, controller manufacturer: ENGEL, controller model: CC200, Hydraulic injection moulding machine manufactured in 2013. This Engel Victory 500/160 tech features a clamping force of 1600 kN and an injection unit of 500. It includes a patented tiebarless clamping system and a highly abrasion-resistant cylinder. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 500/160 tech machine we have for sale. Contact us for further details. • Injection unit: 500 • L/D ratio: 20 • Hydraulics: ECODRIVE SHV1 (high-dynamic servo pump) • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 102 kW • Clamping system: Patented tiebarless, fully hydraulic ENGEL clamping system • Centering: 160 mm • Ejector: Central ejector • Hydraulic core pulls: 2 on moving platen • Pneumatic mold valve control: 2-fold FESTO, up to 16 bar • Mold heating: 8 control zones • Cylinder/screw execution: M3 abrasion/corrosion-resistant cylinder (up to 350 °C), hardened screw S8 (Ø 35 mm, L/D 20), non-return valve R9b • Open nozzle: Flange thread M28 x 1.5, radius 15 mm, bore 4 mm • Mold temperature control: Flow regulator 0–10 l/min with 12 circuits (2 x 6 circuits) Ibjdpfx Asz Dgvzokpeb • Hydraulic tank capacity: Main approx. 330 l; suction approx. 130 l • Interfaces: Coloring device interface; RS-485 for temperature control units; Euromap 67 / AN-146 robot interface; interface for Priamus PDDI 8903D1 and 8903E2 • Languages: Czech and German

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,446 h, clamping force: 2,600 kN, screw diameter: 60 mm, overall weight: 22,300 kg, controller manufacturer: ENGEL, controller model: CC300, product length (max.): 8,780 mm, Electrical injection moulding machine manufactured in 2015. This Engel e-victory 1640/260 features a clamping force of 2600 kN and an injection unit of 1640. It includes a tiebarless clamping system and a servo-electric injection system for high efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel e-victory 1640/260 machine we have for sale. Contact us for further details. • Clamping system: Tiebarless ENGEL clamping system • Injection unit: 1640 • Injection system: Servo-electric, high execution • L/D ratio: 24 • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Hydraulics: ECODRIVE SHV1 (1 demand-regulated servo pump) • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 164 kW • Centering: 160 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 8 on stationary platen with Venturi nozzles and pressure switches • Pneumatic mold valve control: 2-fold FESTO, up to 16 bar • Mold heating: 16 control zones, max heating power 25 kW • Nozzle radius: 15 mm • Nozzle bore: 4 mm • Nozzle contact stroke: approx. 405 mm • Hydraulic tank capacity: Main tank approx. 490 l, suction tank approx. 220 l • Robot interface: Euromap 67 / AN-146 • Languages: Czech and German Additional equipment • MuCell package: • Complete MuCell Basic Package • PM cold-work steel screw Ø 60 mm • Hydraulic needle shut-off nozzle • Melt pressure sensor • Trexel auxiliary equipment: SII VC 30, MIK 1060 SII • Frame for two 50 L gas cylinders • Mold temperature control: 3 ENGEL flomo distributors (24 monitored circuits total) • GEKU automation with conveyor belts Ibsdez Dgrpopfx Akpob

Condition: ready for operation (used), Year of construction: 2016, operating hours: 33,793 h, clamping force: 4,000 kN, screw diameter: 80 mm, overall weight: 31,000 kg, product length (max.): 10,259 mm, Hydraulic injection moulding machine manufactured in 2016. This Engel Victory 3550/400 tech features a clamping force of 4000 kN and an injection unit with a screw diameter of 80 mm. It includes a fully hydraulic tiebarless clamping system and advanced automation with conveyor belts. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 3550/400 tech machine we have for sale. Contact us for further details. • Injection unit: 3550 • L/D ratio: 25 • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Drive system: ECODRIVE SHV3-HSI, 2 pump systems, accumulator • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 282 kW • Clamping system: Tiebarless, fully hydraulic ENGEL clamping system • Centering: 160 mm • Ejector stroke: 250 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 4 on moving platen with Venturi nozzle and pressure switch • Pneumatic valve: 2/2-way valve R 1/4" on stationary platen • Pneumatic mold valve control: 4-fold FESTO, up to 16 bar • Mold heating: 32 control zones, max heating power 43 kW • Screw drive: Electromotoric, speed-controlled, max 150 rpm, rated power 47 kW, torque 3700 Nm • Nozzle radius: 15 mm • Nozzle bore: 6 mm Ibedpfjz Dgpbex Akpjb • Nozzle contact force: approx. 150 kN • Metering stroke: 390 mm • MuCell equipment: MuCell Advanced Package; cylinder L/D 24/25; MuCell G25 screw Ø 80 mm; gas injector bore; melt pressure sensor; RS-485 interface to SCF gas plant; emergency stop connection • Mold temperature control: 3 ENGEL flomo distributors with 8 zones each (24 monitored circuits total) • Hydraulic tank capacity: Main tank approx. 690 l; suction tank approx. 290 l • Robot interface: Euromap 67 / AN-146 • Languages: Czech and German Additional equipment • GEKU automation with conveyor belts (included)

Condition: good (used), Year of construction: 2004, operating hours: 76,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 70 mm, displacement volume: 1,047 cm³, plate length: 1,200 mm, plate height: 1,270 mm, total length: 9,830 mm, total width: 2,330 mm, total height: 2,480 mm, overall weight: 23,090 kg, KRAUSS MAFFEI KM 420-1900/55 CZ Multinject Ijdpfjz Dgc Isx Akpjbb Stock No.: 503534 Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 55 CZ Control System: MC 4 Year of Manufacture: 2004 Operating Hours: 76,000 h Technical Data – Clamping Unit Clamping Force: 4200 kN Tie Bar Spacing h x v: 800 x 800 mm Platen Size h x v: 1270 x 1200 mm Minimum Mold Height: 380 mm Maximum Mold Height: 1400 mm Opening Stroke: 1020 mm Ejector Stroke: 250 mm Ejector Force: 95 kN Centering of Moving Platen D: 200 mm Centering of Fixed Platen D: 200 mm Tool Weight: 6700 kg Technical Data – Injection Unit Screw Diameter: 70 mm Injection Volume: 1047 ccm Injection Pressure: 1778 bar Screw Length: 20 l/d Screw Speed: 527 rpm Plasticizing Rate: 95 g/s PS Free Injection Rate: 953 g/s PS Number of Heating Zones: 6 Dimensions & Weight Machine Dimensions L x W x H: 9.83 m x 2.33 m x 2.48 m Total Weight: 23090 kg Equipment Screen Text in German Hydraulic Core Pull 6x Machine without Handling System Machine without Material Hopper Leveling Elements Tool Heating 16x Two-Component Injection Molding Machine

Condition: good (used), Year of construction: 2005, operating hours: 59,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 60 mm, clearance between the columns: 800 mm, displacement volume: 769 cm³, plate length: 1,200 mm, plate height: 1,270 mm, total length: 6,830 mm, total width: 2,330 mm, total height: 2,480 mm, overall weight: 23,090 kg, Equipment: documentation/manual, KRAUSS MAFFEI KM 420-1900 C2 Stock No.: 503535 Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 C2 Control: MC 4 Year of manufacture: 2005 Operating hours: 59,000 h Technical data, clamping unit side Clamping force: 4200 kN Tie bar distance h x v: 800 x 800 mm Platen size h x v: 1270 x 1200 mm Minimum mold height: 580 mm Maximum mold thickness: 1300 mm Opening stroke: 720 mm Ibjdpfxsz Dgcbj Akpob Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Technical data, injection side Screw diameter: 60 mm Injection volume: 769 cc Injection pressure: 2200 bar Screw length: 23 l/d Screw speed: 285 min Plasticizing rate: 70 g/s PS Free injection rate: 700 g/s PS Number of heating zones: 6 Dimensions & Weight Machine dimensions L x W x H: 6.83 m x 2.33 m x 2.48 m Total weight: 23090 kg Equipment Screen text in German Hydraulic core pull, 4x Machine without handling system Machine without material hopper Leveling elements Tool heating, 12x

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,054 h, clamping force: 2,200 kN, screw diameter: 55 mm, Electrical injection moulding machine manufactured in 2019. This YEAR-CHANCE YC-C 220S features a clamping force of 2,200 kN and a maximum injection volume of 546 cm³. It is equipped with a screw diameter of 55 mm and a maximum injection pressure of 1,797 Bar. If you are looking to get high-quality injection moulding capabilities, consider the YEAR-CHANCE YC-C 220S machine we have for sale. Contact us for further details. Ijdpfx Asz Danwjkpobb • Space between columns (tie-bar spacing): 510 x 510 mm • Maximum mold height: 600 mm • Minimum mold height: 150 mm • Maximum injection volume: 546 cm³ • Maximum injection pressure: 1,797 bar • Centering ring: 100 mm • Core pullers: 2 • Pneumatic valves: 2

Condition: ready for operation (used), Year of construction: 2006, clamping force: 2,500 kN, screw diameter: 45 mm, Hydraulic injection moulding machine manufactured in 2006. This Arburg Allrounder 630S-2500-800/350 features a clamping force of 2,500 kN and a maximum mold height of 900 mm. It includes a screw diameter of 45/35 mm and a maximum injection volume of 195/140 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 630S-2500-800/350 machine we have for sale. Contact us for further details. • Tie-bar spacing (space between columns): 630 x 630 mm • Maximum mold height: 900 mm • Minimum mold height: 300 mm Ibedsz Dal Aspfx Akpob • Maximum injection volume: 195 / 140 cm³ (for 45 / 35 mm screw) • Maximum injection pressure: 2,470 bar • Centering ring: 160 mm • Hot runner control: 3 zones • Core puller: 1 Additional equipment • Robot: Arburg Multilift H

Condition: excellent (used), Year of construction: 2008, operating hours: 26,033 h, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 75 mm, clearance between the columns: 710 mm, displacement volume: 1,657 cm³, plate length: 1,010 mm, plate height: 1,010 mm, total length: 7,200 mm, total width: 1,750 mm, total height: 2,420 mm, overall weight: 16,400 kg, Equipment: documentation/manual, BATTENFELD TM 400-3400 Stock No.: 503220 Manufacturer: Wittmann Battenfeld Type: TM 400-3400 Control: UNILOG B6S Year of Manufacture: 2008 Operating Hours: 26033 h Technical Data, Clamping Unit Clamping Force: 4000 kN Tie Bar Distance h x v: 710 x 710 mm Platen Size h x v: 1010 x 1010 mm Minimum Mold Height: 300 mm Maximum Mold Height: 710 mm Maximum Mold Opening: 1380 mm Opening Stroke: 670 mm Ejector Stroke: 200 mm Ejector Force: 59 kN Centering of Moving Platen D: 160 mm Centering of Fixed Platen D: 160 mm Technical Data, Injection Unit Screw Diameter: 75 mm Injection Volume: 1657 ccm Injection Pressure: 2022 bar Screw Length: 22 l/d Screw Stroke: 375 mm Screw Speed: 178 min Screw Torque: 3759 N Plasticizing Rate: 67 g/s PS Free Injection Flow Rate: 346 g/s PS Nozzle Distance: 600 mm Dimensions & Weight Machine Dimensions L x W x H: 7.2m x 1.75m x 2.42m Total Weight: 16400 KG Equipment Multi-Language Screen Display CEE Socket 16A Hydraulic Core Pull 1x Air Valve 1x Leveling Elements EUROMAP 67 Handling Interface Ibedpfxsz A U Rqe Akpeb USB Interface Schuko Socket 16A

Condition: good (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, total length: 7,980 mm, total width: 2,220 mm, total height: 2,570 mm, overall weight: 30,750 kg, Equipment: documentation/manual, ENGEL ES 1800-350 HL CC100 Stock No.: 503394 Manufacturer: ENGEL Type: ES 1800-350 HL Control: CC100 Year of Manufacture: 2004 Operating Hours: 69,000 h Technical Data, Clamping Unit Clamping Force: 3500 kN Platen Size, Height x Width: 1050 x 980 mm Minimum Mold Height: 350 mm Maximum Mold Height: 1300 mm Opening Stroke: 950 mm Ejector Stroke: 250 mm Ejector Force: 83 kN Tool Weight: 2500 kg Technical Data, Injection Unit Screw Diameter: 70 mm Injection Volume: 1039 ccm Injection Pressure: 1441 bar Screw Length: 20 l/d Screw Stroke: 270 mm Screw Speed: 226 rpm Iodpfx Aksz A U Ntjpjbb Free Injection Rate: 386 g/s Number of Heating Zones: 5 Nozzle Distance: 500 mm Dimensions & Weight Machine Dimensions L x W x H: 7.98 m x 2.22 m x 2.57 m Total Weight: 30,750 kg Equipment Screen Text: German CEE Socket 16A Core Pulling, Hydraulic, 2x Machine including Conveyor Belt Machine including Handling System Machine including Safety Enclosure Machine with Material Hopper Leveling Elements Interface for Color Dosing Unit Interface for Temperature Controller Tool Heating, 24x Technical Data, Handling System Machine Type: Handling System Manufacturer: ENGEL Control: ER-HLI 81 Year of Manufacture: 2004

Condition: excellent (used), Year of construction: 2011, operating hours: 78,454 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, displacement volume: 678 cm³, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, Equipment: documentation/manual, KRAUSS MAFFEI KM 300-1400 CX Stock No.: 503393 Manufacturer: KRAUSS MAFFEI Type: KM 300-1400 CX Control: MC5 Year of manufacture: 2011 Operating hours: 78454 h Technical data, clamping unit Clamping force: 3000 kN Tie bar distance h x v: 630 x 630 mm Platen size h x v: 995 x 1050 mm Minimum mold height: 330 mm Maximum mold height: 1150 mm Opening stroke: 820 mm Ejector stroke: 200 mm Ejector force: 58 kN Centering of moving platen D: 160 mm Centering of fixed platen D: 160 mm Tool weight: 3430 kg Technical data, injection unit Screw diameter: 60 mm Displacement: 678 ccm Injection pressure: 2007 bar Screw length: 20 l/d Screw speed: 260 min Screw torque: 84 N Free injection flow rate: 311 g/s PS Number of heating zones: 6 Dimensions & weight Machine dimensions L x W x H: 6.5m x 2.2m x 2.3m Total weight: 15000KG Equipment Screen text in German CEE socket 16A Ibsdpfxsz A U Ivj Akpsb Pressure accumulator for increased injection performance Hydraulic core pull, 2x Machine without handling system Machine without material hopper Leveling elements EUROMAP 67 interface for handling Interface for handling Schuko socket 10A

Condition: excellent (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, displacement volume: 570 cm³, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, Equipment: documentation/manual, KRAUSS MAFFEI KM 250-1400 CX Stock No.: 503243 Manufacturer: KRAUSS MAFFEI Type: KM 250-1400 CX Control System: MC5 Year of Manufacture: 2010 Operating Hours: 54872 h Technical Data – Clamping Unit Clamping Force: 2500 kN Tie Bar Spacing (horizontal x vertical): 630 x 630 mm Platen Size (horizontal x vertical): 995 x 1050 mm Minimum Mold Thickness: 330 mm Maximum Mold Thickness: 1150 mm Opening Stroke: 820 mm Ejector Stroke: 200 mm Ejector Force: 58 kN Centering of Moving Platen Diameter: 160 mm Centering of Fixed Platen Diameter: 160 mm Tool Weight: 3430 kg Technical Data – Injection Unit Screw Diameter: 55 mm Injection Volume: 570 ccm Injection Pressure: 2387 bar Screw Length: 22 l/d Screw Speed: 260 rpm Plasticizing Rate: 49 g/s PS Number of Heating Zones: 6 Dimensions & Weight Machine Dimensions (LxWxH): 6.5m x 2.2m x 2.3m Total Weight: 15000 kg Equipment 2x Temperature Control Units for Hot Runner System Screen Text in German Iodpoz A Uhiefx Akpsbb CEE Socket 16A Pressure Accumulator for Increased Injection Performance + Ejector or Core Pull parallel Hydraulic Core Pull 1x Air Valve 4x Machine with Material Hopper Machine with Water Battery Machine without Handling System Leveling Elements EUROMAP 12 Interface EUROMAP 67 Handling Interface USB Interface Schuko Socket 10A Low-Wear Plasticizing Unit

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, Equipment: documentation/manual, ARBURG Allrounder 2000 T 2000-800 Stock No.: 503617 Manufacturer: ARBURG Type: Allrounder 2000 T 2000-800 Control: Selogica direct Year of Manufacture: 2019 Operating Hours: 8250 h Technical Data, Clamping Unit Clamping Force: 2000 kN Platen Size H x V: 1772 x 800 mm Minimum Mold Height: 400 mm Maximum Platen Distance: 900 mm Opening Stroke: 500 mm Rotary Table Diameter: 2000 mm Ejector Stroke: 175 mm Ejector Force: 45 kN Mold Weight: 6000 kg Technical Data, Injection Unit Screw Diameter: 50 mm Injection Volume: 392 ccm Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 200 mm Screw Speed: 60 rpm Screw Torque: 880 N Number of Heating Zones: 8 Nozzle Distance: 400 mm Dimensions & Weight Iodpjz A Tdpefx Akpsbb Machine Dimensions L x W x H: 4.11m x 2.65m x 4.81m Total Weight: 22000KG Equipment Screen text in German Screen text in English CEE socket 16A Hydraulic core pull, 4x Air valve 1x Machine with rotary table Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: excellent (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, Equipment: documentation/manual, ARBURG Allrounder 2000 T 2000-800 Stock No.: 503618 Manufacturer: ARBURG Type: Allrounder 2000 T 2000-800 Control: Selogica direct Year of manufacture: 2020 Operating hours: 8344 h Ibjdpfx Aoz A Tb Ujkpob Technical data, clamping unit Clamping force: 2000 kN Platen size h x v: 1772 x 800 mm Minimum mold height: 400 mm Maximum mold opening: 900 mm Opening stroke: 500 mm Platen diameter: 2000 mm Ejector stroke: 175 mm Ejector force: 45 kN Mold weight: 6000 kg Technical data, injection unit Screw diameter: 50 mm Injection volume: 392 ccm Injection pressure: 2000 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 min Screw torque: 880 N Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & weight Machine dimensions L x W x H: 4.11 m x 2.65 m x 4.81 m Total weight: 22000 kg Equipment Screen text, German Screen text, English CEE socket 16A Hydraulic core pull, 4x Air valve 1x Machine with rotary platen Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: excellent (used), Year of construction: 2018, operating hours: 33,526 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 220 cm³, plate length: 760 mm, plate height: 760 mm, total length: 67,500 mm, total width: 2,000 mm, total height: 2,420 mm, overall weight: 8,500 kg, Equipment: documentation/manual, ENGEL e-motion 440-160 Stock No.: 503676 Manufacturer: ENGEL Type: e-motion 440-160 T Control: CC300 Year of manufacture: 2018 Operating hours: 33526 h Technical data, clamping side Clamping force: 1600 kN Tie bar spacing h x v: 520 x 520 mm Platen size h x v: 760 x 760 mm Minimum installation height: 375 mm Maximum installation height: 600 mm Maximum platen spacing: 1060 mm Opening stroke: 460 mm Ejector stroke: 150 mm Ejector force: 40 kN Centering of moving platen D: 160 mm Centering of fixed platen D: 160 mm Tool weight: 1250 kg Technical data, injection side Screw diameter: 40 mm Displacement: 220 ccm Injection pressure: 1940 bar Screw length: 24 l/d Screw stroke: 175 mm Screw speed: 420 min Screw torque: 605 N Plasticizing rate: 33 g/s PS Free injection rate: 224 g/s PS Number of heating zones: 4 Nozzle stroke: 305 mm Dimensions & Weight Machine dimensions L x W x H: 6.75m x 2m x 2.42m Total weight: 8500KG Ibedpfx Aksz A S I Tspsb Equipment Screen text in German Screen text in English CEE socket 32A Hydraulic core pull, 2x Hydraulic core pull unit Air valve 1x Machine with water manifold Machine without material hopper Machine without suction conveying system Pneumatically operated needle shut-off nozzle Leveling elements EUROMAP 63 interface EUROMAP 67 Handling interface Interface for ejector plate locking Schuko socket 10A

Condition: like new (used), Year of construction: 2008, operating hours: 24,600 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, mold height (min.): 300 mm, overall weight: 6,600 kg, Equipment: documentation/manual, Here, we offer the following well-maintained used injection molding machine as part of our injection molding machine trade: We also purchase well-maintained injection molding machines, starting from the current model year 2010. We have been a wholesaler of used injection molding machines for over 25 years. Due to recent developments - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: KraussMaffei Type: KM 160-750 Control: MC5 Year: 2008 Machine No.: 61011790 Operating Hours: 24,600 h Injection Unit Injection unit/screw: 50 mm Injection volume: 393 ccm Injection weight: 358 g Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1892 bar Heating power: 16 kW Clamping Unit Tie bar spacing: 520 x 520 mm Platen size: 820 x 845 (h x v) Clamping force: 160 tons / 1600 kN Opening stroke: 650 mm Maximum platen distance: 950 mm Minimum tool mounting height: 300 mm Ejector stroke: 150 mm Weight: 6,600 kg Pump motor: 22 kW Dimensions: approx. 4.90 m × 1.60 m × 2.10 m Extras -Wedge shoe machine mounting -Hydraulic screw back-rotation lock -Hydraulic screw drive with standard speed -Pneumatic valve 1 on the operator side for blowing function (1 piece 5/2-way valve with 1 solenoid coil). -Control selectable: stroke/time or time/time. Quantity can be manually adjusted via 1 throttle valve at the valve outlet. -Nozzle protection door on the operator side, hinged Iedpsz A Iarofx Akpsbb -Ejector area protection door on the operator side, hinged -Mechanical interface according to EUROMAP 18 for handling device on the non-operator side (with intermediate plate up to and including KM 500) -End position "rear" of the ejector and the tool ejector plate monitored in sequence -Chrome-plated tie bars for the clamping unit and injection unit -Media monitor in the pump room for oil pan monitoring -Enlarged oil cooler for a maximum water supply temperature of 31°C. -Hydraulic core pull control 1-way on the non-operator side. -Water manifold 8-way -12 temperature control points for tool hot runner. Self-optimizing three-point PID controller with accuracy class 0.5. -Ejection of the cooled nozzle tip -Fan on the control cabinet -Power supply system: TN-C or TN-C-S or TN-S system (three-phase networks with a separately routed neutral conductor or a neutral conductor routed together with the earth conductor) -1 service socket 1-phase 10 A in the control cabinet, connected before the main switch in a country-specific version. -Signal interface according to EUROMAP 67 with fault signal and power supply socket CEE 16 A for handling device. -Event log for continuous recording and retrospective analysis -Quality monitoring package: Process monitoring (cycle actual values and integrals) by specifying tolerance bands, actual value display, actual value storage. Documentation can be printed. -Z-cycle time analysis, cycle storage -Language: German, Greek Visible peripherals are not included in the scope of supply. Free loading ex our warehouse in Hanover - worldwide delivery possible on request. Inspection under power possible by arrangement.

Condition: used, Year of construction: 2005, operating hours: 95,000 h, clamping force: 200 kN, displacement volume: 113 cm³, injection pressure: 2,178 bar, overall weight: 11,500 kg, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Ibjdpfoz A Ialjx Akpeb

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, displacement volume: 523 cm³, plate length: 660 mm, plate height: 710 mm, total length: 6,700 mm, total width: 1,600 mm, total height: 1,600 mm, overall weight: 10,900 kg, KRAUSS MAFFEI KM 160-1000 PX Stock No.: 503156 Manufacturer: KRAUSS MAFFEI Type: KM 160-1000 PX Control System: MC6 Year of Manufacture: 2018 Operating Hours: 9585 h Isdpfxjz A D Ras Akpjbb Technical Data – Clamping Unit Clamping Force: 1600 kN Tie Bar Spacing h x v: 520 x 470 mm Platen Size h x v: 710 x 660 mm Minimum Mold Height: 200 mm Maximum Mold Height: 600 mm Opening Stroke: 1050 mm Ejector Stroke: 150 mm Ejector Force: 33 kN Centering of Moving Platen D: 120 mm Centering of Fixed Platen D: 160 mm Technical Data – Injection Unit Screw Diameter: 55 mm Injection Volume: 523 ccm Injection Pressure: 1904 bar Screw Length: 20 l/d Screw Speed: 243 min Screw Torque: 827 N Plasticizing Rate: 43 g/s PS Free Injection Rate: 297 g/s PS Number of Heating Zones: 6 Dimensions & Weight Machine Dimensions L x W x H: 6.7m x 1.6m x 2.3m Total Weight: 10900 KG Equipment Screen text in German CEE socket 16A CEE socket 32A Pressure accumulator for increased injection performance 3 freely programmable inputs and outputs each Core pull pneumatic 2 x Machine with water manifold Machine without material hopper Leveling elements Interface for color dosing device Interface for temperature control unit USB interface Schuko socket 10A Low-wear plasticizing unit Tool heating 24x

Condition: excellent (used), Year of construction: 2007, operating hours: 68,651 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, plate length: 680 mm, plate height: 740 mm, total length: 4,500 mm, total width: 2,100 mm, total height: 2,100 mm, overall weight: 7,300 kg, Equipment: documentation/manual, ENGEL Victory 330-120 Tech Stock No.: 503558 Manufacturer: ENGEL Type: Victory 330-120 Tech Control: CC100 Year of manufacture: 2007 Operating hours: 68651 h Technical data, clamping unit Clamping force: 1200 kN Platen size h x v: 740 x 680 mm Minimum mold thickness: 300 mm Maximum mold thickness: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Centering of moving platen D: 125 mm Centering of fixed platen D: 125 mm Tool weight: 825 kg Technical data, injection unit Screw diameter: 35 mm Displacement: 154 ccm Injection pressure: 1600 bar Screw length: 20 l/d Screw stroke: 160 mm Ibsdpfez A D Dtex Akpob Screw speed: 400 rpm Free injection flow rate: 151 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions L x W x H: 4.5m x 2.1m x 2.1m Total weight: 7300 KG Equipment Screen text in German CEE socket 16A Hydraulic core pull 2x Machine including conveyor belt Machine including safety enclosure Machine without material hopper Leveling elements Interface for ejector plate locking Schuko socket 10A Technical data, handling Machine type: Linear Manufacturer: ENGEL Control: ER-HLI41VC

Condition: excellent (used), Year of construction: 2014, operating hours: 56,851 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 25 mm, displacement volume: 86 cm³, plate length: 663 mm, plate height: 680 mm, total length: 4,570 mm, total width: 1,500 mm, total height: 2,130 mm, overall weight: 4,800 kg, Equipment: documentation/manual, Wittmann Battenfeld EcoPower 110-350 Stock No.: 503665 Manufacturer: Wittmann Battenfeld Type: EcoPower 110-350 Control: UNILOG B6P Year of Manufacture: 2014 Operating Hours: 56851 h Technical Data – Clamping Unit Clamping Force: 1100 kN Tie Bar Spacing h x v: 470 x 420 mm Platen Size h x v: 680 x 663 mm Minimum Mold Height: 200 mm Maximum Mold Height: 450 mm Maximum Mold Opening: 830 mm Opening Stroke: 380 mm Technical Data – Injection Unit Screw Diameter: 25 mm Injection Volume: 86 ccm Injection Pressure: 3000 bar Plasticizing Rate: 9 g/s PS Ijdpfx Aksz A Dwmspjbb Free Injection Flow Rate: 98 g/s PS Dimensions & Weight Machine Dimensions L x W x H: 4.57m x 1.5m x 2.13m Total Weight: 4800 kg Equipment Screen Text – German Screen Text – Multi-Language CEE Socket 16A Machine with Water Manifold Leveling Elements

Condition: good (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 30 mm, displacement volume: 85 cm³, total length: 4,200 mm, total width: 2,100 mm, total height: 3,600 mm, overall weight: 7,300 kg, Equipment: documentation/manual, ARBURG Allrounder 1200 T 1000-170 Stock No.: 503459 Manufacturer: ARBURG Type: Allrounder 1200 T 1000-170 Control System: Selogica Year of Manufacture: 2013 Operating Hours: 22420 h Technical Data - Clamping Unit Clamping Force: 1000 kN Minimum Mold Height: 400 mm Maximum Mold Distance: 700 mm Opening Stroke: 300 mm Platen Size (Diameter): 1200 mm Ejector Stroke: 175 mm Ejector Force: 25 kN Centering of Moving Platen (Diameter): 125 mm Centering of Fixed Platen (Diameter): 125 mm Mold Weight: 1150 kg Technical Data - Injection Unit Screw Diameter: 30 mm Injection Volume: 85 cc Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 120 mm Number of Heating Zones: 4 Nozzle Distance: 210 mm Dimensions & Weight Machine Dimensions (L x W x H): 4.2 m x 2.1 m x 3.60 m Total Weight: 7300 kg Equipment Iodpfsz A Dmzjx Akpjbb 3x Temperature Control Units for Hot Runner Screen Text: German CEE Socket 16A Compact-Flash Drive Rotary Table Freely programmable inputs (2) and outputs (2) Machine with Material Hopper Machine with Water Manifold Needle Gate Nozzle, Hydraulically Actuated EUROMAP 67 Handling Interface Servo-Controlled Hydraulic Pumps Wear-Resistant Plasticizing Unit

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Ibodpfx Akjz A Awrepsb Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Iodpfx Akjz A Awlepobb Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2017, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 50 mm Shot weight: 359 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 392 cm3 Injection pressure: 2000 bar Euromap 67 1x core puller Ibsdpfxez Aty Hj Akpeb Type: Horizontal Drive: Hydraulic