Birka Composites S.l.

Condition: good (used), Year of construction: 2000, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 45 mm, For sale: injection moulding machine by KraussMaffei, model KM 125-700C2. The machine is fully functional and was in production until recently. Technical specifications: Iiedpfx Aaox Ituqj Eok Year of manufacture: 2000 Operating hours: 69,000 h Clamping force: 125 t Screw diameter: 45 mm Needle shut-off: Pneumatic Core pull: 2*Hydraulic Internal pressure sensor

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 184686, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 420 mm, displacement volume: 54 cm³, injection weight: 45 g, opening stroke: 500 mm, For sale is an Arburg injection moulding machine, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. Iiedpex Itamefx Aa Eek Technical data: Year of manufacture: 2001 Clamping force: 1000 kN Tie bar spacing: 420 x 420 mm Opening stroke: 500 mm Mould installation height: 250 mm Mould mounting plate: 570 x 570 mm Ejector stroke: 175 mm Screw diameter: 25 mm Calculated shot volume: 54 cm³ Shot weight: 45 g/PS The machine is offered without periphery. Rotary table, material conveying systems, temperature control units and other accessories are not included.

Condition: excellent (used), Year of construction: 2018, Clamping force: 200 t Screw diameter: 55 mm Shot weight: 434 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 474 cm3 Platen dimensions : 795 x 795 mm Working hours: 25.969 h Type: Horizontal Drive: Hydraulic Equipment: 1x core puller Euromap 67 Iodox Ir Ngopfx Aa Ejik

Condition: excellent (used), Year of construction: 2014, ARBURG A 1500 T 1600-400 rotary table (29.279 h) (S&P 3786) Manufacture year: 2014 Operating hours: 29,379 Stunden Screw: 35 mm Injection pressure: 2500 bar Stroke volume: 154 cm³ Clamping Force: 150 t Tie bar distance: 1500 mm Iiedpfxex If Tfe Aa Eok Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4600 x 1900 x 2300 mm Eeight: 11000 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 4 x Corepuller, Airvalve, Interface Colorizing, Interface Robot etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2016, KRAUSS MAFFEI KM 110-380 CX incl. LRX Robot (7.487 h) (S&P 3789) Manufacture year: 2016 Operating hours: 7,487 Stunden Screw: 35 mm Injection pressure: 2429 bar Stroke volume: 154 cm³ Clamping Force: 110 t Tie bar distance: 470 x 470 mm Mould installation height min.: 300 mm Plate distance max.: 900 mm Dimensions: 4800 x 1600 x 2500 mm Eeight: 8000 kg Connected load: 18,5 kW incl. LRX 50 / 5kg Robot, Safety gate, Covejor belt, Robot Interface, Airvalve, Corepuller, hotrunner 6x etc... Price: on request Iisdpfjx If S Iex Aa Eok contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2008, ARBURG A 520 A 1500-400 ALLDRIVE (36.061 h) incl. KUKA Robot (S&P 3788) Manufacture year: 2008 Operating hours: 36,061 Stunden Screw: 40 HVF mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Iiodpfx Ajx If Suoa Eok Mould installation height min.: 250 mm Plate distance max.: 1000 mm Dimensions: 5100 x 1600 x 2700 mm Eeight: 7250 kg Connected load: 60 kW Accumulator, 4 x Corepuller, Robot Interface EM67, Airvalve, incl. KUKA Robot System KR 5 arc, Convejorbelt, Safety Gate etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2008, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 523 cm³, injection weight: 475 g, mold height (min.): 300 mm, Clamping force: 130 t Year of manufacture: 2008 Shot weight: 475.9 g Injection unit 1000 Screw diameter: 55 mm Specific injection pressure: 1904 bar Injection volume: 523 ccm Shot weight: 475.9 g Clamping force: 130 t Iiedsx Ifrbspfx Aa Esk Mould platen dimensions: 745 x 745 mm Tie bar spacing: 470 x 470 mm Ejector force: 22.6 kN Mould height: 300 mm Opening stroke: 600 mm Max. platen distance: 900 mm Weight: 8,000 kg Year of manufacture: 2008 Control: MC5 Equipment: - accumulator - euromap 67 interface - 2 x pneumatic valve - hydraulic core on moving platen

Condition: excellent (used), Year of construction: 2007, clamping force: 5,000 kN, screw diameter: 85 mm, displacement volume: 2,128 cm³, injection pressure: 1,574 bar, injection weight: 1,937 g, mold height (min.): 450 mm, Battenfeld HM 500/3400 Injection Moulding Machine Clamping force: 500 t Year of manufacture: 2007 Injection weight: 1,937 g Injection unit .../3400 Screw diameter: 85 mm Specific injection pressure: 1,574 bar Injection volume: 2,128 ccm Injection weight: 1,937 g L/D ratio of screw: 22 Mould clamping system 500/... Clamping force: 500 t Platen dimensions: 1,590 x 1,470 mm Tie bar clearance: 1,000 x 800 mm Mould height: 450 mm Opening stroke: 1,150 mm Max. platen distance: 1,600 mm Ejector stroke: 250 mm General data: Weight: 25,000 kg Dimensions (L x W x H) [m]: 7.3 x 2.5 x 2.6 Isdex Ifpaspfx Aa Eoik Equipment: - 1 x pneumatic valve - 2 x hydraulic cores - EUROMAP 67 interface - Bimetallic injection unit

Condition: like new (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, total length: 4,110 mm, total width: 2,650 mm, total height: 4,565 mm, overall weight: 22,000 kg, The nearly new used ARBURG Allrounder T offered here, with a clamping force of 2000 kN, features a 2-station rotary table that alternates 180° forward/back. With only 8,344 operating hours, the machine is in excellent condition. Ijdpfx Aex Id Dpea Eoik

Condition: good (used), Year of construction: 2008, operating hours: 26,033 h, clamping force: 4,000 kN, screw diameter: 75 mm, clearance between the columns: 710 mm, displacement volume: 1,657 cm³, injection pressure: 2,022 bar, warehouse no.: 503220 manufacturer: BATTENFELD type: TM 400-3400 controller: UNILOG B6S year of construction: 2008 operation hours: 26033 h clamping force: 4000 kN distance between tie-bars h x v: 710 x 710 mm size of mould plates h x v: 1010 x 1010 mm min. mould height: 300 mm max. mould height: 710 mm max. open daylight: 1380 mm opening stroke: 670 mm Isdex Id A Eopfx Aa Eeik screw diameter: 75 mm swept volume: 1657 ccm injection pressure: 2022 bar equipment included: Screentext Multi-Language CEE-socket 16A core pulling hydraulically 1x air valve 1x Anti vibration mounts interface robot EUROMAP 67 interface USB Schuko-socket 16A measures of machine l x w x h: 7.2m x 1.75m x 2.42m total weight: 16400KG

Condition: excellent (used), Year of construction: 2008, operating hours: 59,934 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 45 mm, displacement volume: 318 cm³, injection pressure: 1.525 bar, ejector force: 40,000 N, ejector stroke: 130 mm, plate length: 680 mm, plate width: 740 mm, total length: 4,860 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 7,600 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 800 mm, Equipment: documentation/manual, warehouse no.: 503240 manufacturer: ENGEL type: Victory 650-120 tech controller: EC200 A02 year of construction: 2008 operation hours: 59934 h clamping force: 1200 kN size of mould plates h x v: 740 x 680 mm Iiedpjx Icxxefx Aa Eek min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 507 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 1525 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A mould heating 8x measures of machine l x w x h: 4.86m x 1.5m x 2.1m total weight: 7600KG

Condition: excellent (used), Year of construction: 2007, operating hours: 25,215 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 318 cm³, ejector force: 22,000 N, ejector stroke: 150 mm, plate length: 845 mm, plate width: 820 mm, installation height: 2,100 mm, total length: 5,100 mm, total width: 1,600 mm, total height: 2,100 mm, overall weight: 6,600 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 950 mm, Equipment: documentation/manual, warehouse no.: 503472 manufacturer: KRAUSS MAFFEI type: KM 160-750 CX controller: MC5 year of construction: 2007 operation hours: 25215 h clamping force: 1600 kN distance between tie-bars h x v: 520 x 520 mm size of mould plates h x v: 820 x 845 mm min. mould height: 300 mm max. open daylight: 950 mm opening stroke: 650 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2336 bar equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine with material hopper Anti vibration mounts interface EUROMAP 67 wear-resistant injection unit mould heating 6x measures of machine l x w x h: 5.1m x 1.6m x 2.1m total weight: 6600KG technical data robot-system handling type: Linear manufacture: Krauss Maffei controller: LRX S100-1321 year of construction: 2008 X axis: 550 mm Iodpfxsx Icw Uj Aa Ejik Y axis: 1200 mm Z axis: 2500 mm total weight: 280 kg

Condition: excellent (used), Year of construction: 2007, operating hours: 68,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, injection pressure: 1,600 bar, total length: 5,100 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 7,300 kg, Equipment: documentation/manual, warehouse no.: 503558 manufacturer: ENGEL type: Victory 330-120 Tech controller: CC100 year of construction: 2007 operation hours: 68000 h clamping force: 1200 kN size of mould plates h x v: 740 x 470 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 500 mm screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar equipment included screen text german Anti vibration mounts technical data robot-system handling type: Linear manufacture: ENGEL controller: ER-HLI41VC year of construction: 2007 Ijdpox Icwzefx Aa Esik measures of machine l x w x h: 5.1m x 1.5m x 2.1m total weight: 7300KG

Condition: good (used), Year of construction: 2004, operating hours: 76,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 800 mm, displacement volume: 1,047 cm³, injection pressure: 1.778 bar, Equipment: documentation/manual, injection moulding machine (multinject) KRAUSS MAFFEI KM 420-1900/55 CZ warehouse no.: 503534 manufacturer: KRAUSS MAFFEI type: KM 420-1900 55 CZ controller: MC 4 year of construction: 2004 operation hours: 76000 h clamping force: 4200 kN distance between tie-bars h x v: 800 x 800 mm size of mould plates h x v: 1270 x 1200 mm min. mould height: 380 mm max. open daylight: 1400 mm opening stroke: 1020 mm technical data 1. injection unit (horizontal) screw diameter: 70 mm swept volume: 1047 ccm injection pressure: 1778 bar technical data 2. injection unit 55 with ø 22 Injection pressure: 1674 bar Volume: 30cm³ Distance between sprayer 1 and 2: 300 mm (piggyback ) equipment included screen text german core pulling hydraulically 6x Machine without Handling Iiedsx Ict Ajpfx Aa Eok machine without material hopper Anti vibration mounts mould heating 16x Injection moulding machine for two components (multi-inject) measures of machine l x w x h: 9.83m x 2.33m x 2.48m total weight: 23090KG

Condition: good (used), Year of construction: 2006, operating hours: 62,149 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,615 bar, total length: 6,800 mm, total width: 1,800 mm, total height: 2,400 mm, overall weight: 12,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503559 manufacturer: ENGEL type: Victory 1050-220 TECH controller: CC100 year of construction: 2006 operation hours: 62149 h clamping force: 2200 kN size of mould plates h x v: 860 x 830 mm min. mould height: 300 mm max. open daylight: 1045 mm opening stroke: 755 mm screw diameter: 55 mm swept volume: 510 ccm injection pressure: 1615 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for ejector plates safety interface for dosing unit Schuko-socket 10A measures of machine l x w x h: 6.6m x 2.3m x 2.4m Iedpfx Aex Ictvoa Eoik total weight: 12900KG technical data robot-system handling type: Linear manufacture: ENGEL controller: ER-HLI 61

Condition: good (used), Year of construction: 2005, operating hours: 59,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 60 mm, clearance between the columns: 800 mm, displacement volume: 769 cm³, injection pressure: 2.2 bar, Equipment: documentation/manual, warehouse no.: 503535 manufacturer: KRAUSS MAFFEI type: KM 420-1900 C2 controller: MC 4 year of construction: 2005 operation hours: 59000 h clamping force: 4200 kN distance between tie-bars h x v: 800 x 800 mm size of mould plates h x v: 1270 x 1200 mm min. mould height: 580 mm max. open daylight: 1300 mm opening stroke: 720 mm screw diameter: 60 mm swept volume: 769 ccm injection pressure: 2200 bar Iiedpfex Ictpsx Aa Ejk equipment included screen text german core pulling hydraulically 4x Machine without Handling machine without material hopper Anti vibration mounts mould heating 12x measures of machine l x w x h: 6.83m x 2.33m x 2.48m total weight: 23090KG

Condition: good (used), Year of construction: 2012, operating hours: 10,624 h, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 192 cm³, injection pressure: 1,700 bar, plate width: 710 mm, input frequency: 50 Hz, input current: 400 A, Equipment: documentation/manual, warehouse no.: 503503 manufacturer: ENGEL type: insert 650H-120 controller: CC200 year of construction: 2012 operation hours: 10624 h clamping force: 1200 kN size of mould plates h x v: 710 x 400 mm Iijdpfxex Ictij Aa Ejk min. mould height: 400 mm max. open daylight: 750 mm opening stroke: 350 mm screw diameter: 35 mm swept volume: 192 ccm injection pressure: 1700 bar equipment included: screen text german screen text english air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts clamp unit vertikal interface for dosing unit mould heating 8x measures of machine l x w x h: 4.2m x 2m x 3.6m total weight: 12500KG

Condition: excellent (used), Year of construction: 2012, operating hours: 38,000 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 392 cm³, injection pressure: 2 bar, ejector force: 225 N, ejector stroke: 90 mm, plate length: 900 mm, plate width: 900 mm, total length: 6,400 mm, total width: 1,950 mm, total height: 2,210 mm, overall weight: 12,140 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm max. open daylight: 900 mm opening stroke: 600 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included: screen text german CEE-socket 16A CompactFlash interface for data storage core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 interface OPC Schuko-socket 10A selection unit Iodpjx Ictcjfx Aa Ejik measures of machine l x w x h: 6.4m x 1.95m x 2.21m total weight: 12140KG

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 40 mm, clearance between the columns: 630 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, total length: 7,050 mm, total width: 2,050 mm, total height: 2,350 mm, overall weight: 13,050 kg, Equipment: documentation/manual, warehouse no.: 503584 manufacturer: ARBURG type: Allrounder 630 H 2500-400 controller: Selogica year of construction: 2019 clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 750 mm max. open daylight: 1300 mm opening stroke: 550 mm screw diameter: 40 mm swept volume: 201 ccm injection pressure: 2000 bar equipment included screen text german CEE-socket 16A Iiedpfx Aasx Icr Ss Eek machine incl. Handling machine incl. water flow regulator machine without material hopper machine without safety fencing Anti vibration mounts interface for handling interface OPC Schuko-socket 10A measures of machine (without robot) l x w x h: 7.05m x 2.05m x 2.35m total weight: 13050KG technical data robot-system handling type: Linear manufacture: ARBURG controller: Multilift V 15 year of construction: 2019 handling weight: 15 kg total weight: 500 kg

Condition: good (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, ejector force: 83,000 N, ejector stroke: 250 mm, plate length: 980 mm, plate width: 1,050 mm, total length: 7,980 mm, total width: 2,220 mm, total height: 2,570 mm, overall weight: 30,750 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503394 manufacturer: ENGEL type: ES 1800-350 HL controller: CC100 year of construction: 2004 operation hours: 69000 h clamping force: 3500 kN Iijdpex Icrfefx Aa Esk size of mould plates h x v: 1050 x 980 mm min. mould height: 350 mm max. open daylight: 1300 mm opening stroke: 950 mm screw diameter: 70 mm swept volume: 1039 ccm injection pressure: 1441 bar equipment included screen text german machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine without material hopper Anti vibration mounts measures of machine l x w x h: 7.98m x 2.22m x 2.57m total weight: 30750KG technical data robot-system handling type: Handling manufacture: ENGEL controller: ER-HLI 81 year of construction: 2004

Condition: good (used), Year of construction: 2012, operating hours: 43,331 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 45 mm, clearance between the columns: 630 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, warehouse no.: 503604 manufacturer: ARBURG type: Allrounder 630 S 2500-800 controller: Selogica year of construction: 2012 operation hours: 43331 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm max. open daylight: 1300 mm opening stroke: 600 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2470 bar equipment included screen text german core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing Anti vibration mounts measures of machine l x w x h: 6.12m x 2.25m x 2.21m total weight: 12200KG technical data robot-system handling type: Linearroboter manufacture: Arburg controller: Multilift year of construction: 2012 X axis: 400 mm Z axis: 1400 mm Iijdpfx Aex Icq Iea Esk C axis rotation: 90 ° total weight: 450 kg

Condition: ready for operation (used), Year of construction: 2018, operating hours: 28,076 h, General Data Machine weight 27000 kg Measurements height 2780 mm Clamping Unit Clamping force 4200 kN Injection Unit Screw diameter 60 mm Dimensions Machine Length 8900 mm This DEMAG El-Exis SP 420/820-2500 was manufactured in 2018. A robust electrical injection moulding machine, it features a screw diameter of 60 mm, a maximum dosing volume of 891 ccm, and a clamp force of 4200 KN. The tie bar distance is 820 mm. If you are looking to get high-quality moulding capabilities consider the DEMAG El-Exis SP 420/820-2500 machine we have for tact us for more information. Isdpfjx H U Ensx Aa Esik Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2019, operating hours: 19,884 h, General Data Iiedpfx Aasx H U Ehj Eok Machine weight 27000 kg Measurements height 278 mm Dimensions Machine Length 890 mm Injection Unit Screw diameter 60 mm Clamping Unit Clamping force 3500 kN This DEMAG El-Exis SP 350/820-2500 was manufactured in 2019. A robust electrical injection moulding machine, it features a screw diameter of 60 mm, a clamping force of 3500 KN, and a tie bar distance of 820 mm. With dimensions of 8.90 x 2.21 x 2.78 meters and a weight of 27,000 kg, consider the opportunity to buy this DEMAG El-Exis SP 350/820-2500 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2018, operating hours: 24,004 h, clamping force: 2,000 kN, screw diameter: 40 mm, total height: 2,280 mm, overall weight: 9,400 kg, product length (max.): 6,610 mm, General Data Machine weight 9400 kg Measurements height 2280 mm Isdex H Uzcepfx Aa Ejik Clamping Unit Clamping force 2000 kN Injection Unit Screw diameter 40 mm Dimensions Machine Length 6610 mm This DEMAG El-Exis SP 200/560-675 was manufactured in 2018. It features a screw diameter of 40 mm, a maximum dosing volume of 255 ccm, and a clamp force of 2000 KN. The tie bar distance is 560 mm, and it has a total weight of 9,400 kg. Consider the opportunity to buy this DEMAG El-Exis SP 200/560-675 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 2017, machine/vehicle number: 244489, Machine as new. Very little used, only for sample production. Iedsx H Npuopfx Aa Eeik Machine is fully equipped: