Sc Sebana Srl

Condition: good (used), Year of construction: 2011, Used 2.5-meter CNC press brake from Safan Bjdpfozilvmjx Altjdd Type: E Brake 80 2550 Capacity: 2500 x 80 tons Y1, Y2, X, XDelta, R, Z1, and Z2 CNC controlled Touchscreen CNC control Hydraulic Wila top and bottom clamping Crowning on the lower table Year of manufacture: 2011

Condition: good (used), overall weight: 42,000 kg, total width: 2,800 mm, total length: 12,400 mm, total height: 5,100 mm, BOLDRINI RIBO 30HY/6000 – Flanging & Dishing Machine Manufacturer: BOLDRINI (Italy) Model: RIBO 30HY/6000 Type: Hydraulic Flanging & Dishing Machine Bsdpfx Aszilu Aeltjdd Max. workpiece diameter: 6,000 mm Maximum plate thickness: 30 mm (cold forming) Year: 2002 Application: Dishing and flanging of tank heads, pressure vessel ends and dished ends. Length:12400mm Width:2800mm Height:5100mm Weight:42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, RADIAL DRILLING MACHINE BREDA 1250 X 55 Bjdpfx Alsziluvetedd MODEL R55 TYPE: 125 USED MACHINE INTERNAL CODE: SVR 319

Condition: used, Controller: FANUC 31i-B5 Max. turning diameter: ø540 mm Max. turning length: 1.020 mm Spindle bore / bar capacity: ø76 / 65 mm Y-axis travel: 170 mm (±85) Milling spindle: 12.000 rpm, 18.5 kW Tool magazine (ATC): 80 stations, Capto C6 Tool change time: 2.0 s Counter spindle: 5.000 rpm, 22 kW Spindle power: 22 / 18.5 kW (S1/S6) Bdodpfjzilupjx Altod

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: SN201000003, control type: CNC control, degree of automation: automatic, actuation type: pneumatic, controller model: FANUC Series 16i-LB, laser type: CO₂ laser, laser source manufacturer: FANUC, laser source model: FANUC LASER C4000i-B / C4000i Model B, laser hours: 13,443 h, laser power: 4,000 W, laser wavelength: 106 nm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 300 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 300 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 170 m/min, positioning accuracy: 0.1 mm, input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 19,500 kg, total length: 6,000 mm, total width: 2,500 mm, total height: 2,000 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, For sale: CNC CO₂ laser ERMAK / ERMAKSAN LASERMAK 4000.3 x 1.5 – 4 kW Used CNC laser cutting machine for sheet metal, ERMAK / ERMAKSAN LASERMAK 4000.3 x 1.5, is for sale. The machine is equipped with a FANUC CO₂ laser source C4000i-B, 4 kW, and a FANUC Series 16i-LB CNC control system. The laser has a working area of approximately 3000 x 1500 mm and is suitable for cutting carbon steel, stainless steel, and aluminum, depending on the material, thickness, gases used, and machine settings. The machine is equipped with the following main peripheral units: Thermotec chiller, Metal Working srl suction/filtration system, Atlas Copco dryer/air preparation system, and Precitec cutting head. It has an exchangeable/movable table for easier loading and unloading of sheet metal. The machine features two loading tables. Main technical data: Manufacturer: ERMAKSAN MAKINA SANAYI TIC. A.S., Turkey Model: LASERMAK 4000.3 x 1.5 Type: CNC CO₂ laser cutting machine Working area: approximately 3100 x 1500 mm Laser source: FANUC LASER C4000i-B Laser power: 4000 W / 4 kW Max pulse peak power: 5000 W Control: FANUC Series 16i-LB Axes: X-Y-Z-U-V Maximum positioning speed: 170 m/min Power supply: 380 V Electrical consumption: 75–90 kW Dimensions: 5285 x 10480 x 2040 mm Weight: 19,500 kg Cutting head: Precitec Chiller: Thermotec LJ45A35 Suction: Metal Working srl UNIT-POLYGONAL Dryer / air preparation: Atlas Copco CD 25+ Serial number: SN20100003 Laser source production: FANUC, Japan, May 2011 Maximum cutting thicknesses: Carbon steel: up to 20 mm Stainless steel: up to 12 mm Aluminum: up to 8 mm Additional equipment: Thermotec LJ45A35 chiller Metal Working srl suction/filtration system Atlas Copco CD 25+ air preparation/dryer system Precitec cutting head FANUC Series 16i-LB CNC control system FANUC CO₂ laser source C4000i-B Exchangeable/movable table Condition The machine is available and can be inspected on-site. It is sold in its current condition, with all the equipment included. It is suitable for manufacturers of metal products, metal structures, sheet metal components, and companies looking for a powerful CO₂ laser with a large working area. Inspection is possible by prior arrangement. Bedpfxjziluij Altedd

Condition: excellent (used), functionality: fully functional, WARCOM SHEARING MACHINE 6000 X 8 HYDRAULIC Bjdpfx Aszilt Sjltedd MAXIMA 60-08 MODEL

Condition: used, axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 02/2010, loading space length: 10,600 mm, loading space width: 2,470 mm, loading space height: 2,620 mm, total length: 10,900 mm, total width: 2,550 mm, suspension: air, tire size: 275/70, tire condition: 50 %, wheelbase: 7,060 mm, color: other, Year of construction: 2010, Equipment: ABS, tail-lift, = Additional options and accessories = Bjdpfsziltxjx Altjdd - Air Suspension - BPW Axles - Disc brakes - Steering Axle = More information = Axle configuration Tyre size: 275/70 Make axles: BPW Tyre profile: 50% Brakes: disc brakes Suspension: air suspension Rear axle: Max. axle load: 10000 kg; Steering Weights Empty weight: 7.040 kg Carrying capacity: 14.960 kg GVW: 22.000 kg Functional Tail lift: Zepro, tail lift, 2000 kg Identification Registration number: OK-16-ZB

Year of construction: 2024, condition: used, machine/vehicle number: 2333470, Thermal reactor Bdsdpfx Aljziltreted

Condition: not inspected (used), Year of construction: 1978, Year of manufacture: 1978 Weight: approx. 8,000 kg Bdjdeziltlopfx Altsd

Year of construction: 1995, condition: good (used), Robust, remotely controlled timber transport trolley from Möhringer, model Robocontrol. Track gauge: 980 mm. Trolley height: 430 mm. Fully hydraulic. Travel speed: 100 m/min. Equipped with timber rotating chains and a clamping device. Robust auxiliary trolley with timber rotating chains. Fully hydraulic. Bjdpfxeziltfj Altsdd Electrical control cabinet with control system. Cabin electrically powered, with noise insulation and heating. 2 doors, front window can be opened. Comfort seat. Control elements and flat cable.

Year of construction: 2024, condition: used, machine/vehicle number: 2334248, Technical specifications: Bjdpfezilrzex Altjdd Payload: 280 kg

Condition: used, functionality: fully functional, machine/vehicle number: 001668U, load capacity: 1,000 kg, For sale Used Demag single-girder overhead crane, approximately 12,300 mm span x 1,000 kg capacity. Ref. 001668U * Stored indoors * Technically 100% operational and inspected All our new and used cranes, which we deliver installed, come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height, and repainting if required * Power rails / conductor bar * Radio remote control Bodpfx Aljzilrnetodd * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, roller bridge, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder crane. Chain hoist.

Condition: not inspected (used), Data Bodpfx Aszilrholtsdd Tabletop dimensions: approx. 730 x 730 mm Suitable for the Fanuc M900iB/280L robot Overall dimensions: approx. 940 x 810 x 660 mm

Condition: used, Technical specifications: Max. planing width: 520 mm Max. planing height: 300 mm Cutter head speed: 5000 rpm Number of knives: 4 Number of rollers in the table: 1 Feed rate: continuously adjustable Electric lifting mechanism Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 1240 mm Width: 1090 mm Height: 1210 mm Bsdpfx Alozilrbetodd

Year of construction: 2021, operating hours: 500 h, condition: like new (used), DLyte PRO500 Dry Electropolishing System – Complete Set – Only 500 Operating Hours For sale: DLyte PRO500 by GPAINNOVA, a complete dry electropolishing / surface finishing system. The machine is in excellent condition, almost like new, with only approximately 500 operating hours. It has been used in a clean production environment and is fully functional. The set can be inspected and tested at our factory before purchase. Included in the set: * DLyte PRO500 machine * SMC Thermo Chiller HRS150-AF-40 * Original workpiece holders / fixture system, as shown in the photos * Mobile holder trolley / storage system * Accessories, as shown in the photos Machine details: * Manufacturer: GPAINNOVA / DLyte * Model: PRO500 * Article No.: GP4012691 * Serial No.: 200300-000081 * Year: 10/2022 * Weight: approx. 1600 kg * Rated power: 25 kW * Voltage: 400 Vac, 3P + N + GND * Frequency: 50–60 Hz * Rated current: 35 A * Full-load current: 40 A * Air supply: 6–7 bar Bjdozilq Rspfx Altjdd Chiller details: * Manufacturer: SMC * Model: HRS150-AF-40 * Year: 2023 * Cooling capacity: 5 kW * Power supply: 3-phase, 380–415 V, 50/60 Hz * Refrigerant: R410A * Weight: approx. 177 kg Condition: * Very low usage: approx. 500 operating hours * Excellent technical and visual condition * Ready for production * Tests can be performed at our factory before purchase Price: €250,000

Condition: used, Technical specifications: Spindle diameter: 50 mm Replaceable spindle Spindle speed: 3/4.5/6/9 thousand RPM Spindle adjustment: up/down Bdjdpozilqwefx Altod Starting method: star/delta Rotation direction: left/right Power supply: 380 V

Condition: excellent (used), Year of construction: 2014, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Opening stroke: 500 mm Distance between platten:(b x h) 570x570 mm Clear column spacing: 420x420 mm Bsdszilqkjpfx Altedd Ejector stroke: 175 mm Ejector force: 40 kN Hydraulic pump: 23,9 kW Screw: 35 mm, screw: L/D 20, 30 % glass Max wept volume 144 cm3 Mth: 35047 pump L x W x H: 3700 x 1650 x 2600mm Weight 3650 kg Language: CZ, English, German Condition: machine is excellent condition working untill 30 CW 2024, now not under power

Condition: used, Year of construction: 2005, Serial Number 177554 YOM 2005 Mazatrol 640m Control EIA & Mazatrol Programming 30 Tool Magazine Bsdpfx Ajzilp Tjltsdd CAT Tooling 4th Axis Swarf Conveyor Mazak Tool length measuring unit Spindle thru coolant UK Buyers - Price £42,000 +VAT Carriage/delivery is additional

Condition: used, Technical specifications: Bodpfjzilp Hjx Altodd Spindle diameter: 35 mm Spindle height: 160 mm Spindle rotation: left/right Electric spindle height adjustment Tilting spindle Adjustable cross-slide arms Dust extraction port: 120 mm Motor power: 5.5 kW Power supply: 380 V Manufacturer: SAC Overall dimensions: Length: 1120 mm Width: 1070 mm Height: 1040 mm

Condition: used, mileage: 185,000 km, first registration: 09/2016, axle configuration: 8x4, color: other, suspension: steel, Year of construction: 2016, Suspension: leaf suspension Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels; Reduction: hub reduction Rear axle 2: Double wheels; Reduction: hub reduction = Dealer information = Bank data: Rabobank Account: 39.33.10.655 Bodpozilptjfx Altjdd IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, Makatrol Smart Control Serial Number 254702 YOM 2014 EIA & Mazatrol Programming Full Factory 4th Axis 30 Tool Magazine CAT Tooling USB Ports No swarf conveyor or thru coolant Bsdpfxszilpmj Altsdd UK Buyers - Price £39,000 +VAT Carriage/delivery is additional

Condition: used, SCM T120C 8/24 Spindle Moulder Bdjdpfx Alezilpgjted

Condition: refurbished (used), operating hours: 2,103 h, functionality: fully functional, turntable diameter: 1,000 mm, power: 17 kW (23.11 HP), Equipment: documentation/manual, Rösler RDT 100 with filter system, overhauled and in very good condition - Rotating table with frequency-controlled speed - Turbine H28 11kW, frequency-controlled speed - Access via 2 doors for crane loading - Additional rubber protective mat for the rotating table - Filter system Year of manufacture: 2002 Operating hours: approx. 2,193 Bodszilpaepfx Altsdd Rotating table diameter: 1000 mm Max. workpiece height: 470 mm Max. batch weight: 300 kg Number of impeller wheels: 1 Total weight: 2070 kg Rated power: 17 kW The system is sold without warranty. Warranty of 6 months if this system is installed by our qualified technician.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details measuring range X-axis 300 mm measuring range Y-axis 250 mm measuring range Z-axis 600 mm weight 700 kg dimensions of machine 2600 x 1400 x 1900 mm coolant tank 800 x 600 x 920 mm Additional information Presetting, shrinking and measuring machine Bedpeziln Nefx Altsdd Software saturn 1 Zoller Multivision II Without toolholders. On 30. May 2022 the machine was checked by a technician from ZOLLER. Shrinking is currently not possible. The induction spool and the control unit for it must be renewed. The purchase price of a comparable new machine (incl. software) from ZOLLER is approx. 100.000 EUR, with a current delivery time of approx. 52 weeks !

Year of construction: 2016, condition: refurbished (used), functionality: fully functional, This is an SCC 61 WE combination steamer in an electric version, from the premium manufacturer Rational, manufactured in 2017. The combination steamer is a device from the latest SCC series, featuring triple-pane glass and LED lighting. The device has been completely refurbished in our in-house workshop and the combination steamer is fully functional. The base frame shown in the picture is not included in the offer, but can be purchased as an option. These are example photos; actual photos will follow shortly. The list price is €9,400 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational device type? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality brand-name equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 This combination steamer offers space for 5 x 400x600mm trays. In automatic mode, the device automatically recognizes the ideal cooking path, the size of the food, the loading quantity and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods and finishing). Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening dimensions for transport W x H: 845x850mm Power connection: V: 400 / kW: 11 / Hz: 50/60 Capacity: 6x 1/1GN Weight: approx. 110 kg Serial number: E61SI16112555320 Year of manufacture: 2016 Condition: used, completely refurbished, fully functional Further details: In combination steamer mode, 3 operating modes are available: steam (30°C to 130 °C), hot air (30°C to 300°C) and combination (30°C to 300°C) Care Control - self-cleaning function Core temperature sensor Handheld spray gun with automatic retraction 8.5 inch color display and touchscreen 5 fan speeds programmable Integrated, maintenance-free grease extraction system Automatic start time preselection 7 cleaning levels for unattended cleaning - even overnight Humidification adjustable in 3 levels - from 30°C to 260 °C 5 programmable fermentation levels USB interface Seamless, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Bjdpfx Alszilnvstjdd Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).