Tatmetal Çelik Sanayi ve Ticaret A.Ş.

Condition: good (used), Manufacturer: unknown Year of manufacture: Type: Pipe straightening and drawing machine Pipe diameter: up to 10 mm Pipe length – stop for measurement: 6,300 mm Operation: hydraulic Application: for heating pipes Dimensions: 7,500 x 1,000 x 1,200 mm Weight: approx. 0.5 t Bedsygv H Eepfx Afnjlc

Condition: used, Sheet Straightener / Leveler Brand: Procesos del Fleje Bedpfx Asydkz Ejfnolc Model: 6011-E-S2 Sheet width: 400 mm

Condition: excellent (used), Working height: 100 mm Flat steel: 100 x 10 or 80 x 12 or 30 x 20 mm Square steel: 22 mm Round steel: 25 mm Angle steel: 100 x 10 mm Aluminum flat bars: 100 x 30 mm Bjdeydbfhopfx Afnjlc Required space: 500 x 600 mm

Year of construction: 1998, condition: ready for operation (used), A hydraulic 3-roll plate rolling machine Omcca is available. Working length: 2050mm, max. plate thickness rolling/pre-bending: 8mm/6mm, roll diameter: 200mm. Machine dimensions X/Y/Z: approx. 3200mm/900mm/1500mm, weight: approx. 3300kg. On-site inspection is possible. Bledpfoycwrzjx Afnoc

Condition: excellent (used), Year of construction: 1999, Coil-Ø: max. 2.000 mm Coilbreite: max. 2.000 mm Blodpfeycumcsx Afnoc Coilgewicht: max. 13 t

Year of construction: 2003, operating hours: 3,542 h, condition: ready for operation (used), This EHT ECOCUT was manufactured in 2003. A robust hydraulic shearing machine, it features a cutting length of 3,050 mm and a thickness capacity of 13 mm. It operates with an 18.5 kW main motor and includes an ELGO P8511 control for precision. Consider the opportunity to buy this EHT ECOCUT hydraulic shearing machine. Contact us for more information. Blodpfx Ajycfq Sofnjc • Cutting capacity: • Cutting length: 3,050 mm • Cutting thickness: 13 mm • Material tensile strength: 450 N/mm² • Hydraulic system: • Oil volume: 300 liters • Electrical data: • Current type: AC • Frequency: 50 Hz • Operating voltage: 400 V • Control voltage: 24 V DC • Rated current: 45 A • Main fuse rated current: 63 A • Main motor power: 18.5 kW • Control / documentation: • Control type: ELGO P8511 (NC backgauge control) • Electrical circuit diagram no.: 111 796

Condition: ready for operation (used), A hydraulic multi-purpose punching machine Geka is available. Punching force: 70t, angle shearing capacity: 150mm/150mm/13mm, flat bar shearing capacity: 450mm/15mm, round bar shearing capacity: 45mm, square bar shearing capacity: 45mm, punching station capacity hole diameter/material thickness: 28mm/20mm, beam and profile steel shearing capacity I-beam/U-beam: 120mm/120mm, bending station capacity: 250mm/15mm, notching station capacity: 250mm/250mm/6mm. Machine dimensions X/Y/Z: approx. 2000mm/1200mm/2000mm, weight: approx. 2000kg. An on-site inspection is possible. Bodpfx Afsyb Sc Ejnelc

Year of construction: 2000, condition: ready for operation (used), A hydraulic guillotine shear Turi is available. Cutting length: 2500mm, max. material thickness: 4mm, backgauge: 600mm, stroke rate: 20/min. Machine dimensions X/Y/Z: approx. 3300mm/1500mm/1500mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible. Bljdpfx Aeyb Scxofnsc

Year of construction: 2005, condition: ready for operation (used), A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible. Bljdjya Hwzspfx Afnjc

Year of construction: 2018, condition: ready for operation (used), This 6-axis MACRI Provar 6-45 U-D was manufactured in 2018. A fully automatic CNC tube bending machine, it features minimal use with only around 20 working hours. It supports a max tube diameter of Ø45 × 4 mm and a usable tube length of 5,800 mm. Key capabilities include a max bending speed of 150°/sec and a max push speed of 1,000 mm/sec. Consider the opportunity to buy this MACRI Provar 6-45 U-D profile bending machine. Contact us for more information. Additional equipment • Movable slide support / Anti-wrinkle insert support / 2×1 m safety mat (aluminum) / Macri software installed on office PC (Windows 7) / Rear support-free bending system / Hydraulic cylinder for square/rectangular tube die opening / Automatic material elasticity control system / Tooling Sets Machine Benefits Technical Machine Benefits • Production hours: around 20 hours, the machine was not used in the production. • Type: fully automatic cnc tube bending machine (6-axis) • Max. Tube diameter (round): Ø45 × 4 mm / min. Tube diameter for variable radius: Ø35 × 2 mm (rm 10d) / usable tube length: 5800 mm / max. Bending speed: 150°/sec (±0. 1°) / max. Push speed: 1000 mm/sec (±0. 1 mm)/ max. Clamp rotation speed: 450°/sec (±0. 1°) / rotation direction: clockwise / spindle movement (head travel): 6-axis (y, x, z, b1, b2, a) Bedpfx Afsyap Upenolc • Installed power: 15 kw / voltage / frequency: 400 v / 50 hz / dimensions of machine (l×w×h): 6000 × 1200 × 1200 mm / weight (kg): 4500 kg / control cabinet dimensions: 900 × 600 × 1800 mm • Control system: industrial pc with windows 7 / display: 19" lcd tft svga touch screen / control software: graphical cartesian & cad-based interface / features: manual and semi-automatic operation, import of 3d files (e. G. , solidworks)

Year of construction: 2022, condition: ready for operation (used), overall weight: 12,500 kg, total height: 2,300 mm, This Metallkraft HTBS PRO 3113 was manufactured in 2022. It's a hydraulic shearing machine designed for precise cutting of steel and stainless steel plates up to 13 mm thick. Features include a CNC-controlled back gauge, motorized cutting gap and angle adjustment, and built-in LED lighting for enhanced visibility. Ideal for industrial settings requiring high precision. Contact us for more information about this machine. Additional equipment • CNC-controlled CybTouch 8 touchscreen for precise and easy settings • Back gauge with ball screw and linear guide, CNC-controlled adjustable in the range of 5–1000 mm • Motorized cutting gap and angle adjustment directly via the control panel Bljdpfx Afeyaliponsc • 15 clamping units with rubber pads to prevent sheet slipping • Built-in LED lighting to illuminate the cutting zone • Safety elements include rear light curtain and fold-up plexiglass finger guard • High-quality, resharpenable knives (upper knife 2-piece, lower knife 4-piece) • Mobile foot pedal with emergency stop switch • Built-in ball table for easy sheet movement • Electrical components: Siemens and Mitsubishi // Hydraulic components: Hydac, Hoerbiger Machine Benefits Technical Machine Benefits • Table dimensions: length: 3610 mm, depth: 635 mm, height: 805 mm Dimensions Machine Depth 4100 mm

Condition: used, Used Press Brakes and Shears available – various capacities and working lengths Photo 1 – Press brake GEKO – 100 ton – 3050 mm Photo 2 – Synchronized press brake VICLA – 125 ton – 3100 mm Photo 3 – Synchronized press brake WARCOM FUTURA – 200 ton – 4550 mm Photo 4 – Press brake GADE – 50 ton – 4050 mm Blodpfsyabn Uox Afnsc Photo 5 – Press brake CML – 100 ton – 4100 mm Photo 6 – Shear GEKO – 3050 x 6 mm Photo 7 – Shear VICLA – 3050 x 8 mm Photo 8 – Shear BL – 3050 x 5/7 mm Photo 9 – Shear AMADA – 4000 x 8 mm Photo 10 – Shear OMAG – 2050 x 4 mm

Year of construction: 1997, condition: ready for operation (used), This SCHRODER-FASTI FASTI 509-40-6 was manufactured in 1997. A Hydraulic shearing machine capable of handling aluminum up to 8mm, steel up to 6mm, and stainless steel up to 3mm. Minimum stop dimension is 15mm. A solid choice for shaping various metals, the SCHRODER-FASTI FASTI 509-40-6 machine we have for sale. Contact us for further details. Additional equipment • Front-operated motorised fence • Right-angled side stop 90° with tilt stop • 2 drop cam stops in T-slot guide • Table extensions with T-slots • Operating tool Bsdpsx U T Haofx Afnjlc Machine Benefits Technical Machine Benefits • Minimum stop dimension: 15 mm • Construction: all-steel welded construction • Cutting technology: / double-edged, multi-part blades with 87° wedge angle / stepless cutting length adjustment / cutting gap adjustment (can be read to 1/100 mm using a dial gauge) / cutting line display with silhouette • Drive: hydraulic with oil filling • Control system: o electric control in accordance with din en 60204-1 / operating modes: single stroke, continuous stroke, partial stroke, jogging • Projection on the side stand: 50 mm • Dimensions (approx. ) for 509-40-6: a (total length): 4540 mm /b (table width): 1885 mm /c (table depth): 1645 mm/ d (cutting length): 4300 mm/ h (height of work surface): 2329 mm /k (total machine height): 1430 mm • Side stand projection: 50 mm (standard) • Foundation fastening: composite anchor hva m16x125 with mortar cartridges (drill Ø 18 mm) / concrete strength class min. B25 required. • Cutting performance: shear angle: large angle = lower resistance, higher performance. / small angle = higher resistance, lower power // max. Sheet thickness: o dependent on material strength (see diagram in document). O recommended strip width: 12-15 × sheet thickness for low-torsion cuts Extra Information Machine still under power

Condition: ready for operation (used), A two-roll plate rolling machine Fasti is available. Roll diameter: 130mm, working width: 2150mm, max. sheet thickness: 3.5mm. Machine dimensions X/Y/Z: approx. 2900mm/650mm/1100mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Bjdpfx Afex U Dwvenjlc

Year of construction: 2005, condition: ready for operation (used), Working length: 3050mm, max. material thickness: 16mm, cutting angle range: 0.5°-2.5°, cutting gap adjustment range: 0.05mm-1.2mm, stroke rate: 16/min, back gauge travel: 1000mm, oil quantity: 300l. Machine dimensions X/Y/Z: approx. 4200mm/4250mm/2050mm, weight: approx. 14000kg. Documentation available. On-site inspection is possible. Bodpsx U Dw Nsfx Afnslc

Year of construction: 2008, operating hours: 3,575 h, condition: ready for operation (used), General Data Measurements height 1300 mm This OMSG CAPRI 9/13 M was manufactured in 2008. It features a working area with dimensions of 900 mm by 1300 mm and a suspension load capacity of up to 2 x 500 kg. Equipped with 2 x 5.5 kW turbines, replaceable blasting area armor, and a screw-driven blasting material collection system. It also includes an elevator, grain cleaning system, and a control cabinet-operated suspension movement. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery Bledpfxox Sz D Ij Afnsc

Condition: ready for operation (used), Year of construction: 2018, operating hours: 16,000 h, Additional Equipment Precision deburring and roller technology Smart Punch Monitoring Parts conveyor belt for part removal flap Advanced punching equipment This TRUMPF TruPunch 1000 (S19) was manufactured in 2018. It features a closed machine frame, hybrid axis system, and a linear magazine with 20 spots for clamps and tools. Equipped with maintenance-free 3-phase servo motors and a TRUMPF control based on Bosch Rexroth IndraMotion MTX, it offers advanced punching capabilities and efficient operation with only 16,000 work hours. Contact us for more information about this machine. Application Types Punching Bljdpfjx R E Nxjx Afnsc

Condition: ready for operation (used), A fastening element press machine PEM-Penn Engineering and a small precision grinding machine Agathon are available. 1) PEM PemSerter Series 4, press force: 6t, throat depth: 450mm, stroke: 74mm, machine dimensions X/Y/Z: approx. 750mm/660mm/1700mm, weight: approx. 400kg. 2) Tool grinding machine Agathon, grinding wheel diameter: 175mm, grinding wheel width: 20mm, bore: 20mm, machine dimensions X/Y/Z: approx. 850mm/600mm/1300mm, weight: approx. 300kg. On-site inspection is possible. Bljdpfox R Dtvsx Afnsc

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 9314, controller model: Beckhoff mit Addison DataBend, wall thickness: 3 mm, working length: 6,000 mm, workpiece diameter (max.): 76 mm, Equipment: CE marking, TECHNICAL DETAILS Max. diameter: 76 mm Max. wall thickness: 3 mm Max. bending length: 6,000 mm MACHINE DETAILS Control: Beckhoff with Addison DataBend Dimensions & Weight Dimensions (L x W x H): 8,000 mm x 2,000 mm x 2,000 mm Transport weight: 6,100 kg Transport packages: 1 EQUIPMENT incl. several mandrels and bending formers Bledpfx Afox Rbf Njnsc Documentation CE marking

Year of construction: 2000, condition: ready for operation (used), Main Drive Bending length 2500 mm Number of axis 3 Additional Equipment O+UC1000/2(SO) P40FFICE Tool set consisting of 13 CLA tool pairs for a total length of 1100 mm Includes pairs of CLA tools ranging from 25 mm to 90 mm Quick-clamping segments for large-area recesses This 3-axis Salvagnini P4-2512 was manufactured in 2000, featuring a max bending length of 2500mm and handling sheet thicknesses up to 3.00mm. It includes quick-clamping segments for enhanced flexibility and precision in sheet metal operations. If you are looking to get high-quality bending capabilities, consider the Salvagnini P4-2512 machine we have for sale. Contact us for more information about this machine. Application Types Blsdpfx Afsx Nr Tzsnsc Other Sheet Metal Machinery

Year of construction: 1984, condition: ready for operation (used), travel distance X-axis: 15,900 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 790 mm, overall weight: 23,000 kg, number of axes: 3, General Data Machine weight 23000 kg Bljdpfx Asx I S Rqsfnec Main Drive Number of axis 3 Movement X-Axis Movement 15900 mm Z-Axis Movement 790 mm Y-Axis Movement 500 mm This 3-axis GRABENER Single-sided sheet metal edge milling machine was manufactured in 1984. It features a powerful 50 kW DC motor, spindle speeds up to 500 rpm, and a maximum torque of 2,000 Nm. The machine offers extensive travel capabilities with 15,900 mm on the x-axis and rapid traverse rates up to 8,000 mm/min. Ideal for precision milling with a swivel range of +/-45°. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Condition: ready for operation (used), A defective press brake Trumpf is available. Press force: 2000kN, bending length: 4080mm, ram stroke: 365mm, table-ram distance: 632mm, max. opening height: 535mm, angular adjustment: +/-10mm, throat depth: 410mm, frame distance: 3680mm, table width: 200mm, working height: 1050mm. Machine dimensions X/Y/Z: approx. 4650mm/2250mm/2900mm, weight: approx. 18000kg. The control board is defective. The machine is equipped with intact bending aids on both sides. Documentation available. On-site inspection is possible. Bedpfox I Rq Ajx Afnelc

Condition: ready for operation (used), Tecnoma-lijn voor de productie van installatiehaken voor industriële goten 1 - Afrolinrichting 2 ton maximale breedte: 30 mm binnen- en buitendiameter van de spoel: 508 / 1600 mm hydraulische uitzetting van de klauw: 460 640 mm 1 kW 2 - Voederbak Blsdpfjx Impnox Afnec 3 - Rolvormstation maximale dop: 2 mm 2,2 kW 4 - 3 ponsstations 5 - Buigen en knippen Klik hier om de Tecnoma-rolvormlijn voor industriële goten te bekijken.

Year of construction: 2017, operating hours: 6,685 h, condition: ready for operation (used), General Data Machine weight 10830 kg Measurements height 2750 mm Dimensions Machine Length 5450 mm This Hesse AD-S 30175 press brake was manufactured in 2017. It features a robust 3050 x 175 TON capacity, a stroke of 265 mm, and operates on a supply voltage of 3 x 400 Volt. Weighing 10830 kg, it ensures stability and precision in operation. If you are looking to get high-quality bending capabilities, consider the Hesse AD-S 30175 machine we have for sale. Contact us for more information. Bsdpfx Asx H U D Defnolc Application Types Bending

Year of construction: 2001, condition: ready for operation (used), A Schechtl swing bending machine for sheet metal processing is available. Working length: 2040mm, opening height: 140mm, bending capacity: 3mm, bending speed: 50°/s, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 3000mm/750mm/1250mm, weight: approx. 2750kg. On-site inspection is possible. Blsdpfsx Hz Ntjx Afnec