CNC & Mechanik Dienstleistungen

Condition: excellent (used), Year of construction: 2024, operating hours: 250 h, 3-axis CNC machine (VMC) MAZAK - VCE-600 MACH-ID 9485 Make: MAZAK Type: VCE-600 Control: Mazatrol SMOOTHEZ Year: 2024 Only 250 Spindle Hours ATC 48 Position Lehmann EA-520 R-Mi4 4e axis integrated Grundfos IKZ 20 Bar Renishaw 3D Tool probe Renishaw Length probe Optional tooling packge Bedoyyygwjpfx Acveda Optional SCHUNK KONTEC KSG Machine vice (4 units) New EUR 200.000 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 14,000 W, number of axes: 5, This 5-axis SPINNER U5-620 was manufactured in 2008. It operates on a supply voltage of 400 V and a frequency of 50/60 Hz, with a nominal current of 50 A. If you are looking to get high-quality machining capabilities, consider the SPINNER U5-620 vertical machining centre we have for sale. Contact us for further details. • Supply voltage: 3/PE ~ 400 V (3-phase with protective earth) • Frequency: 50 / 60 Hz • Operating current (IB): 42 A • Nominal current (IN): 50 A • Max. swing diameter: 800 mm • Main spindle: • Max. torque: 175 Nm Bdodpfxoyyqdys Acvea Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2006, operating hours: 11,900 h, travel distance X-axis: 635 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2006. It features an X-axis travel of approximately 635 mm and operates on a supply voltage of 400 V, 3-phase. With a rated power of 35 kVA, this vertical machining centre is designed for efficient performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details. • Supply voltage: 400 V, 3-phase + PE • Frequency: 50/60 Hz • Rated power: 35 kVA • Rated current: 64 A • Maximum current: 50 A • Control voltage: 230 V AC / 24 V DC Bdedpfx Asyycu Rjcvja

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Bdodeyx Uk Iopfx Acvea Max. tool length: 340 mm Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, CNC vertical machining center "KUNZMANN BA 1000 SK" Equipped with Heidenhain iTNC 530 path control. Year of manufacture: 2013 Travel ranges: X 1020 mm, Y 620 mm, Z 920 mm Spindle speed range: 1 – 14,000 rpm, stepless With the following accessories: - Fixed angular table, 1200 mm x 610 mm clamping surface - NC attachment rotary table WALTER, diameter 500 mm Bsdpjyx Ua Ajfx Acveda - B-axis swivel head (torque drive), +30 / -120 degrees - Vertical tool changer with 40 magazine positions (SK 40) - 3D Heidenhain touch probe - Electronic handwheel - Fixed full enclosure with internal lighting - Coolant through spindle (IKZ system) - Coolant system - Oil mist extraction - Chip conveyor - Operating manual

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, controller manufacturer: Heidenhain, For sale: Used DMC 635 – Powerful Vertical Machining Center Upgrade your production processes with this robust and high-performance DMC 635 from DMG MORI! This vertical machining center is ideal for a wide range of milling applications, offering excellent performance when machining various materials. Key Features: • High rigidity and stability: Ensures precise machining results and long service life. • Large working area: Provides ample space for processing large workpieces. • High spindle speed: Enables fast and efficient machining operations. • Sturdy construction: Guarantees longevity and reliable performance. • CNC control: Equipped with a user-friendly CNC controller for easy programming and operation. Additional Information: Bsdpfxjyx D T Eo Acvoda • Year of manufacture: 2006 • Condition: good, used • Control: Heidenhain iTNC530 • Travel paths: 635 x 460 x 510 mm • Spindle speeds: 20 – 10,000 rpm Ideal for: • General machining • Tool and mold making • Single-part and small-batch production • Mechanical engineering Why choose this DMC 635? This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your machining capabilities and increase your productivity.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 14,018 h, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426/430, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DECKEL DMU 60 E was manufactured in 1998. It features a spindle speed of 12,000 rpm and an impressive X-axis travel of 600 mm, Y-axis travel of 525 mm, and Z-axis travel of 500 mm. The machine includes a fixed angle table with a clamping surface of 1000 x 542 mm and a 25-position double gripper tool changer. If you are looking to get high-quality machining capabilities, consider the DECKEL DMU 60 E vertical machining centre we have for sale. Contact us for further details. • Operating hours (duty cycle): 35,214 h Bsdpeyxrtgofx Acvjda • Spindle hours: 14,018 h • Table type: Fixed angle table • Clamping surface: 1000 x 542 mm • Tool changer: 25-position, double gripper • Equipment: Electronic handwheel • Interfaces: RS-232 C / RS-422 • Power outlet: 230 V / 1 A • Condition: Guides replaced approx. 8 years ago; spindle in perfect working order • Can be powered up and tested

Condition: excellent (used), MAKINO V 33i Graphite is a 3‑axis machining center designed for precision, high accuracy and reliability. Capacities: table 750×450 mm with 4 T‑slots 18H8 at 100 mm, table load 300 kg; travels X650 Y450 Z350 mm; workpiece max L750 W635 H250 mm. Specs: spindle HSK E50 (nose–table 150–500 mm), stepless 300–30,000 t/min, torque 23.1 Nm; spindle power 17/13 kW; feed 1–20,000 mm/min, rapid 20 m/min; tool magazine 60 places, tool Ø max 80 mm, length 250 mm, tool change 4.8 s; 3×400 V 50 Hz, air 4–8 bar; machine ≈7700 kg, footprint 2330×2325×2600 mm, installed power 50 kVA. Accessories: lamp, oil‑mist extractor, spindle cooling, EROWA EASY ROBOT loader, status light. Achieves tight tolerances; suits automotive, watchmaking, tooling, aerospace and medical applications. Bdedpfx Aeyxn Awscvsa

Condition: used, Year of construction: 2016, x-travel 610 mm y-travel 510 mm z-travel 610 mm Control MAX5 distance spindle /table 150 - 760 mm table surface area 760 x 510 mm T-slots (number x width x distance) 5 x 18 H8 x 100 mm table load 1.360 kg number of spindle speeds 12.000 spindle drive 9 kW Bdjdoyxhiqopfx Acvoa torque 95 Nm tool taper SK-A 40 number of tool places 30 Pos. tool diameter 80 mm Tool diameter with free secondary positions 130 mm tool length - max. 300 mm weight of tools 7 kg auto power on hours ca. 17.626 h spindle hours ca. 900 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. The main spindle was replaced a year ago. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 530 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis Mazak VARIAXIS C 600 was manufactured in 2022. It features a table size of 730 x 450 mm and impressive travels of 650 mm in the X-axis, 550 mm in the Y-axis, and 530 mm in the Z-axis. The machine is equipped with a spindle speed of 18,000 rpm and a tool magazine that holds 60 tools. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS C 600 vertical machining centre we have for sale. Contact us for further details. • Control: Smooth X Bjdpjyxdcgsfx Acveda • Table size: 730 x 450 mm • Through-spindle coolant: 20 bar • Number of pallets: 1 • Table type: T-slot table • Capability: Continuous simultaneous 5-axis machining Additional equipment • Renishaw probe • Remote handwheel • Air blow on spindle flange Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2007, controller model: Ultimax, table width: 355 mm, table length: 760 mm, number of slots in tool magazine: 20, HURCO VM1 Vertical Machining Center The HURCO VM1 is a compact vertical CNC machining center, ideally suited for precise milling operations in single-part and small-batch production. The machine stands out for its robust construction, user-friendly control system, and efficient tool changing capability. Technical Equipment Worktable: 760 mm × 355 mm Equipped with machine vice CNC control: Ultimax Automatic tool changer with 20 tool positions Bdedpfx Acoyxcykovoa Machine Condition and Design The machine features a fully enclosed safety cabin with large front windows. The control panel, including a display, operation keys, and emergency stop, is mounted on the side for ergonomic access. A chip collection tray is located beneath the working area. Thanks to its compact footprint, the HURCO VM1 is especially suitable for workshops with limited floor space, while still delivering high performance and flexibility.

Condition: used, Year of construction: 2018, operating hours: 10,104 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 36 m/min, Equipment: chip conveyor, DOOSAN VC 630 5AX (5-AXIS machining center) Model: VC 630 5AX HEIDENHAIN TNC640 NC Year of manufacture: 2018 Condition: Used, very good, still in production Operating hours: 26,290 h Spindle hours: 10,104 h X-axis: 650 mm Y-axis: 765 mm Z-axis: 520 mm A-axis: +30° to -120° C-axis: 360° Bedpeyxb S Ssfx Acveda Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 36 m/min Maximum table load: 500 kg Spindle: 16000rpm 30/24kW Tool holder: HSK 63A Through-spindle coolant: 18 bar Height: 3295 mm Width: 3200 mm Length: 4585 mm Weight: 13500kg

Condition: used, Year of construction: 2019, x-travel 660 mm y-travel 406 mm z-travel 508 mm Control MAX5 distance spindle /table 102 - 610 mm table surface area 762 x 406 mm T-slots (number x width x distance) 3 x 18 H8 x 100 mm table load 682 kg spindle tunring speed 12.000 U/min spindle drive 11 kW torque 61 Nm tool taper SK 40 number of tool places 20 Pos. tool diameter 89 mm Tool diameter with free secondary positions 127 mm tool length - max. 250 mm weight of tools 7 kg spindle hours ca. 1.664 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Electronic handwheel - Synchronous thread cutting - Internal coolant supply 20 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Bjdpfx Aoyw Tncjcvsda Prior sale is reserved.

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 30 mm Control Roeders RFM 600 DS table-size 700 x 550 mm spindle tunring speed 42.000 U/min tool taper HSK 40 number of tool places 20 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Bdedpfoyw Tmxox Acvoa Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 1997, operating hours: 19,831 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, total height: 2,700 mm, total width: 2,800 mm, table load: 500 kg, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, product length (max.): 3,300 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 63V vertical machining centre was manufactured in 1997. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a tool magazine capacity of 24 tools and a maximum spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 63V machine we have for sale. Contact us for further details. Bdedpfx Aeyw Rmvocvja • Table: • Size: 800 × 500 mm • Operating hours: 19,831 h (actual counter from control) • Condition: Powered, connected, and fully operational • Note: Control upgrade from Sinumerik 810D to 840D Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2000, x-travel 1200 mm y-travel 600 mm z-travel 700 mm control HEIDENHAIN TNC 426 M turning speeds 20-6300 U/min table load 800 kg 1200x630 mm Bsdpfx Acsyv N Amevoda tool taper SK40 4 height of the machine 2950 mm weight of the machine ca. 8800 kg

Condition: used, Year of construction: 2011, x-travel 1200 mm y-travel 650 mm z-travel 520 mm A-axis ° C-axis 360 spindle taper SK 40 turning speeds 30-8000 U/min power capacity 22 kW TRAVEL SWIVEL RANGE IN X 500 mm Fixed machine table travel range in X 570 mm Swivel rotary table dimensions 520x420 mm Interfering edge diameter 610 mm Fixed table dimensions 700x600 mm dimensions 3600x2650x2800 mm weight of the machine ca. 8500 kg Ausstattung: - 5-Achsen Bearbeitungszentrum Hedelius - CNC Steuerung Heidenhain iTNC 530 - NC-Dreh-Schwenktisch rechts - fest eingebauter Tisch links - 30-fach Werkzeugwechsler - elektrisches Handrad - IKZ (20 bar) - Späneförderer Youtube-Video-Links: ?v=LCzjYX7UYLs&ab_channel=BaestleinGmbH Bdsdpfsyv Nv Tex Acvja ?v=w0ChyCdDL0Y&ab_channel=BaestleinGmbH ?v=g7WvwE9gjXk&ab_channel=BaestleinGmbH

Condition: used, Year of construction: 2002, x-travel 600 mm y-travel 410 mm z-travel 520 mm Bjdpfx Acoyv Ngxjvoda Spindle Speed 8000 U/min. table length 840 mm table width 420 mm engine output 15 kW tool change unit 16 control SIEMENS 810 shopmill rapid traverse X- and Y-axis 36 m/min rapid traverse Z-axis 20 m/min taper ISO SK 40 dimensions 2200x2300x2300 mm weight 2500 kg Youtube-Video-Links: ?v=lGP4FX8j_Gg ?v=WSiuzCJw6G4

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, table load: 500 kg, rotational speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 600 mm Spindle speed: 9,000 rpm Spindle taper: ISO 40 Spindle drive: 7.5 kW Table size: 750 mm x 450 mm Spindle/table distance: 690 mm Table load: 500 kg Bdjdpfx Aeyv A E Iocvea MACHINE DETAILS Control: Heidenhain type 410 M mm Machine weight: approx. 3.2 t EQUIPMENT Electric handwheel

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 6,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 500 mm Travel Z-axis: 400 mm Spindle speed range: 20 – 6,000 rpm Spindle taper: ISO 40 Number of tool changer positions: 24 MACHINE DETAILS Total power requirement: 35 kW Dimensions & Weight Required space (L x W x H): approx. 3,600 x 3,000 x 2,925 mm Bdedpfx Aoyv Axzocvja Machine weight: approx. 5,200 kg

Condition: excellent (used), Year of construction: 2000, Travel paths X travel: 600 mm Y travel: 450 mm Z travel: 450 mm Table size: 850 x 530 mm Working spindle Spindle speed: 100 – 20,000 rpm Bdodpfjyvzbnjx Acvja Tool holder: HSK 63 Tool magazine capacity: 30 slots Machine dimensions: 3900 x 3500 x 2700 mm Weight: 6500 kg

Condition: reconditioned (used), Year of construction: 2011, CNC Vertical Machining Center DECKEL MAHO DMF 260 linear, NEW DMG Design With Siemens 840 D path control with Shop Mill Year of manufacture: 2011 Travel distances: X 2600 mm Y 700 mm Z 700 mm Spindle speed range: 20 – 14,000 rpm, stepless (SK 40) Bsdpfx Acoyvvlnjvoda Including the following accessories: - Rigid angle table, 2920 mm x 750 mm clamping area - Controlled swivel milling head (B axis) - NC rotary table by Hofmann with tailstock, center height: 200 mm - Vertical tool changer with 40 magazine slots (SK 40) - Electronic handwheel - Full enclosure with sliding doors and interior lighting - Coolant high pressure system, 40 bar - Chip conveyor - Operating modes 3 + 4 - 2 x Rotoclear (rotating viewing window) - Partition wall - Coolant system - RITTAL control cabinet cooler - 4 height-adjustable machine feet - Operating manual

Condition: ready for operation (used), Year of construction: 2001, operating hours: 11,472 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: FANUC, controller model: System 16iM, spindle speed (max.): 30,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis Makino SNC 64-A15 was manufactured in 2001. It features a main spindle speed ranging from 300 to 30,000 rpm and a spindle motor power of 15 kW. The machine is equipped with a tool magazine holding 15 positions and offers a feed rate of up to 16,000 mm/min. If you are looking to get high-quality graphite and metal machining capabilities, consider the Makino SNC 64-A15 vertical machining centre we have for sale. Contact us for further details. • Electrical • Operating voltage: 400 V • Frequency: 50 Hz • Phases: 3-phase • Nominal current: 90 A • Recommended supply fuse: 100 A (slow-blow/time delay) • Supply cable size: 35 mm² copper • Wiring diagram: 4036 EP 0024 • CNC / Control • Microcomputer control: Professional A • CNC: FANUC System 16iM • DNC connection: Data server interface • Integrated IC memory: 160 MB • Interpolation: NURBS • Programs: 125 main and sub-programs storable simultaneously • Coordinate input: Polar coordinate input available • High-speed contour control: Super-GI • Processor: RISC for fast 3D machining calculations • Mechanical construction • Machine frame: Cast iron welded construction • Axes layout: Cross table system (X, Y); Z-axis console type • Guides: Preloaded ball linear guideways • Thermal stability: Oil circulation cooling for spindle temperature stabilization • Axis performance • Rapid traverse: up to 16,000 mm/min • Simultaneous machining: 3-axis contour milling • Contour accuracy: High (Super-GI control) • Spindle • Tool holder: HSK-A63F • Torque: 21 Nm • Front bearing diameter: 55 mm • Tool system • Tool magazine capacity: 15 tools • Tool breakage monitoring: Yes • Automatic tool changing: Yes • Applications / capabilities • Graphite electrode milling (incl. long tools) • Copper electrode machining • Hardened steel milling • Designed for automatic production sequences Bsdpeyvq Drsfx Acveda • Optimized surface finish capability • Contour-accurate 3D milling capability • Standard/integrated systems • Graphite dust extraction system • Dust removal via: air blast, spindle suction, tool suction • Filter system with automatic collection container • Minimum quantity lubrication (MQL) • Designed for high-speed graphite machining • Suitable for hardened mold cores

Condition: ready for operation (used), Year of construction: 2008, operating hours: 79,500 h, functionality: fully functional, machine/vehicle number: 11710000713, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, controller model: HEIDENHAIN iTNC 530, workpiece weight (max.): 600 kg, The machine spindle was replaced according to DMG in 2022. A measurement protocol for the machine is included! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 700 mm Travel Z-axis: 700 mm Spindle speed: 18,000 rpm Spindle torque: 110 / 84 Nm Spindle power: 34 / 28 kW Tool holder: SK 40 Tool changer: 180 positions Pallet size: 500 x 500 mm Max. workpiece weight: 600 kg Rapid traverse: 60 m/min MACHINE DETAILS Control: HEIDENHAIN iTNC 530 Total connected load: 68 kVA Dimensions & Weight Space requirements: 9.5 x 7.5 x 3.4 m Machine weight: 10.5 t Operating Hours Spindle hours: 79,500 h Power-on hours: 112,000 h EQUIPMENT NC rotary table RS 10 pallet rotary storage, total of 12 pallet stations iTNC operator panel for the loading station Bdedpoyvp Dksfx Acvoa ICS 40 bar (production package) Through-spindle air blast BA 4 2/4 hydraulic clamping for worktable and set-up station BLUM laser (prepared) Oil mist separator TS 649 probe Mechanical tool breakage detection SDS (Spindle Diagnostic System) Rinse gun Electronic handwheel Chip conveyor

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Parts shown by hand not come. Bsdpfxoyviqds Acvoda