Kabes

Condition: used, Working width from to ~ 45 - 95 mm Hedpoy Dh Siefx Ampjl Working height from to tba mm 3.000 mm milling height 130 mm Semi-automatic finger jointing line Sauter type RS for joining wooden workpieces by means of finger joints. The system is suitable for waste wood processing and for the production of extended solid wood lamellas. Including dismantling and loading. Fixed loading date: 15.06.2026. Consisting of: - Milling and gluing machine Sauter type RS-FPEL 130 - Press Sauter type RS-DKPV 6 - End length saw Sauter DAS 500

Condition: good (used), Year of construction: 2010, functionality: fully functional, Finger Jointing Line WEINIG NKT Doppel-Pack DP20 An industrial finger jointing solution – engineered for maximum precision and efficiency Technical Specifications: - Infeed timber length: min. 130 mm | max. 1000 mm - Outfeed timber length: min. 3700 mm | max. 7400 mm - Timber cross-section: min. 20 x 40 mm | max. 80 x 180 mm - Cutter diameter: 370 mm - Finger profile: Vertical / Horizontal, 10/11 fingers, 3.8 mm pitch - Glue application: double-sided, PVAC white glue - Connected load: 80 kW Note: The machine is currently dismantled and in stock at our facility. Inspection is possible by appointment. Scope of supply: Hedpfx Aey A Ttpompel - WEINIG NKT Doppel-Pack DP20 incl. control unit - Integrated gluing station for double-sided application - Operating manual & documentation Hydromat 17B (7 Spindles) General Information Manufacturer: Weinig AG Model: Hydromat 17B // 7 Spindle (various tooling) Type: High-performance profiling planer/moulder Year of manufacture: 1989 Operating voltage: 380 V / 50 Hz Bottom-Right-Left-Right-Left-Top-Bottom, rigid table Description Heavy-duty high-performance planer and moulder made from vibration-dampening, warp-resistant cast components in a modular construction system. Designed for precise and economical wood processing with sustained high capacity. Mechanical feed, adjustable between 5 – 35 m/min, feed motor 5.5 kW (7.5 HP). Surfacing table length 2 m, quick adjustment available. Cutting depth for surfacing and jointing spindles, each adjustable up to 10 mm. Technical Data • Feed speed: 5 – 35 m/min, mechanical • Feed motor: 5.5 kW / 7.5 HP • Operating voltage: 380 V / 50 Hz • Table length: 2000 mm • Adjustable cutting depth: 10 mm (surface and jointing sides) • Machine version: No counter bearing, heavy-duty configuration

Condition: excellent (used), Year of construction: 2017, Automatic finger joining line ! Manufacturer - MTM Year - 2017 Hedoy Auraspfx Ampjl Entrance width - 60 cm Capacity - 10m3/8h Line consists : Input conveyor Left and right milling machine Glue applicator Output conveyor Longitudinal pressing press - 6 m Electrical cabinet with control panel

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, GRECON Ultra automatic finger jointing line Year of manufacture: 2003 Technical condition: very good, machine regularly serviced Technical data: • input workpiece length: 150–1000 mm • timber width: 40–205 mm • timber thickness: 20–80 mm • output / pressing length: 6100 mm • pressing force: 120 kN / 12 t • max. cross-section for 10/11 mm finger joints in softwood: 100 cm² • max. cross-section for 10/11 mm finger joints in hardwood: 80 cm² Performance: • vertical finger-jointing: • Ultra: 15.2 m/min Equipment / design: • 600 mm wide package milling unit • manual turning table • automatic turning of material and transfer to the press Hsdpfx Amey Amk Ujpel • the machine operates in a fully automatic cycle • 1 operator required Possibility of professional dismantling, assembly, commissioning, and operator training for the machine.

Condition: good (used), PACK ROLLER CONVEYORS POWERED 3 PCS 6000MM LONG X 1420MM WIDE WITH 110MM DIAMETER ROLLERS WITH 2X 225MM WIDE FORKLIFT SLOTS AT 1250MM SPACING RAL 7016 DARK GREY 2 PCS 7000MM LONG 1420MM WIDE WITH 110MM DIAMETER ROLLERS WITHOUT FORKLIT SLOTS RAL 7016 DARK GREY 2 PCS 6000MM LONG X 1500MM WIDE WITH 110MM DIAMETER ROLLERS Hsdpfsyxm N Nox Ampsl WITH 2X 225MM WIDE FORKLIFT SLOTS AT 1250MM SPACING RAL 7035 LIGHT GREY MORE CONVEYORS AVAILABLE ALSO OF DIFFERENT TYPES. PLEASE ASK!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Finger Jointing Line GreCon Turbo-S 1000 Manufacturer: GreCon Model: Turbo-S 1000 Year of manufacture: 2007 Machine description: For sale: GreCon Turbo-S 1000 finger jointing line, year 2007, designed for efficient production of finger-jointed solid wood components. The Turbo-S 1000 is a well-known and proven GreCon solution for high output, precise finger profile machining and consistent joint quality. This machine is suitable for the production of structural timber, furniture components, joinery parts and solid wood elements for further processing. Depending on configuration, tooling and equipment, the line can process both softwood and hardwood. Technical data: - Input workpiece length: approx. 150 – 1000 mm - Working width: approx. 40 – 205 mm - Optional working width: up to approx. 225 mm - Working thickness: approx. 20 – 80 mm - Glue application system: FlankenJet - Number of press channels: 2 - Frequency-controlled feed - Material: softwood and hardwood - Machine type: high-performance finger jointing line - Application: production of finger-jointed solid wood components Features / advantages: - High production capacity - Excellent joint quality - Proven GreCon technology - Suitable for continuous industrial production - Compact and robust design - Good solution for joinery, furniture and structural timber production Hsdpfx Amjyu Up Ispsl Condition: very good Note: Technical details may vary depending on the exact machine configuration, tooling, press length and installed options. Manufacturer material for the Turbo-S 1000 series also shows high line output depending on joint orientation, timber dimensions and press configuration.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Finger Jointing Line GreCon CombiPact Manufacturer: GreCon Model: CombiPact Year of manufacture: 2006 Machine description: For sale: GreCon CombiPact finger jointing line, year 2006, designed for the production of finger-jointed solid wood elements. This machine is a compact and efficient solution for woodworking companies producing structural timber, glued components and solid wood elements for further processing. The GreCon CombiPact is well known for its reliable construction, precise finger profile machining and consistent production quality. Suitable for processing softwood and hardwood, depending on tooling and machine configuration. Technical data: - Input workpiece length: approx. 150 – 1000 mm - Working width: approx. 40 – 205 mm - Working thickness: up to approx. 80 mm - Pressing / output length: approx. 3000 – 6100 mm - Finger joint profile: typically 10/11 mm - Gluing system: automatic glue application system - Final press: included Hsdpfsyu Unwex Ampol - Material: softwood and hardwood - Machine type: finger jointing line - Application: production of finger-jointed timber and solid wood components Features / advantages: - Compact design - High precision finger joint machining - Reliable and proven GreCon technology - Suitable for continuous production - Good solution for joinery, furniture and structural timber production Condition: very good Note: Technical details may vary depending on the exact machine configuration, tooling and installed options.

Condition: ready for operation (used), For sale: Famad longitudinal wood jointing line. PDFD jointing line in double-tenoner version, including a lengthwise jointing press, allowing wooden elements to be joined into strips up to 7 meters long. Hodpfx Ameyr Aduopel For more information, please call: 604205076.

Condition: like new (used), Year of construction: 2010, operating hours: 200 h, functionality: fully functional, Finger-jointing line, like new, only operated for 60 days. Hjdpfxeyl Nuae Ampsl

Condition: ready for operation (used), Year of construction: 2023, 3-meter automatic wood length gluing press Hsdpfx Aeylqc Eempel

Condition: used, Year of construction: 2011, Working width from to 80-120 mm Working height from to 30-80 mm Hjdpfxjyk H U Ie Ampsl 1200-1600 mm

Condition: used, Year of construction: 2021, Working width from to 100-400 mm Working height from to 20-150 mm Hodpfx Ameyk H Syjpsl Dimensions (L/W/H) 2200x1650x1600 mm Weight 1300 kg

Condition: excellent (used), Year of construction: 2014, WEINIG GRECON HS 120 – FINGER JOINTING LINE Basic information: Model: GRECON DIMTER HS 120 LI Manufacturer: WEINIG (Germany) Type of machine: finger jointing line Year of manufacture: 2014 Year of last upgrade: 2022 (addition of ABB automatic feeding system) Net price: €399,000 A) Specification of the finger jointing line - WEINIG GRECON HS 120 finger jointer (year 2014) with brush feeder for wooden components - Two through-feed milling machines for finger joint profile cutting - Automatic glue applicator with quality control (GlueEye Vision system) - Pre-jointing station for aligning elements - Press for joining, with pressing length approx. 6.1 m (6100 mm) - Integrated ABB robotic line – automatic feeding of the finger jointer - Automatic glue suction from a 1000 l IBC with agitator Robotic loading: - ABB IRB 6640 four-axis robot - Two palletizing cells for continuous operation - Maximum length of elements picked by robot: from 110 to 600 mm - Year of robotic cell construction: 2021 Material handling and discharge: - Roller conveyor system with rotators for feeding battens into robot cell - FAMAD DBNA-40T DUO scissor lift at the press (automatic height adjustment, table size 6.0 x 1.3 m) Hsdpfxsyk E H Nj Ampol - Roller storage buffer for batten stacks after joint cutting – storage space 82 liner meters B) Technical parameters Material dimensions and range: - Incoming wood length: 110 – 900 mm - Max material width: 150 mm - Max material thickness: 50 mm - Pressing segment length: approx. 6100 mm - Number of milling stations: 2 - Number of scoring units: 4 Drive and power: - Total connected power: 75 kW - Machine weight: approx. 12,800 kg Space and installation requirements: - Required floor length: approx. 14 m - Required width: approx. 10 m Media supply requirements for the line: - Electrical power supply 400 V / 3-phase - Compressed air - Chip and dust extraction - Internet access (control and diagnostics systems) C) Application of the GRECON HS 120 line The GRECON HS 120 line is designed for through-feed finger jointing of short wooden segments into endless slats of up to approx. 6,100 mm in length. Used in the production of: - furniture boards - countertops - structural components - battens and solid wood semi-finished products D) Personnel and number of operators The GRECON HS 120 line with ABB robotic feeding (2 pallet cells, alternating operation) requires only one operator. E) Production process 1. Pallets with pre-sorted wooden elements are delivered to the robot loading cell. 2. The ABB robot picks items from the pallet and loads them onto the belt magazine of the GRECON HS 120 line. 3. The line mills male and female finger joints in a through-feed process. 4. The automatic glue applicator applies adhesive (monitored by the GlueEye Vision system). 5. The pre-jointing station assembles elements to the pre-set length. 6. The cross-cut saw cuts the endless batten to the desired size and feeds it into the press. 7. The press clamps the element until the glue fully sets. 8. Finished slats are placed on the scissor lift, undergo quality control, and are transported to the roller storage buffer.

Condition: used, Year of construction: 2020, Working width from to 50 x 150 mm Hedpfx Aeyhq Umsmpjl Working height from to 20 - 50 mm

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, MLKT tenoning machine automatic, after complete overhaul, with automatic glue feed Hjdpfeyhnpnox Ampjl

Condition: used, Year of construction: 2018, functionality: fully functional, WEINIG GRECON HS 120 – FINGER JOINTING LINE FOR WOOD Basic information: Model: GRECON DIMTER HS 120 LI Hedeyhm R Rjpfx Ampsl Manufacturer: WEINIG (Germany) Machine type: finger jointing line for wood Year of manufacture: 2018 Year of last upgrade: 2022 (expansion with ABB automatic loading) Net price: €499,000 A) Finger Jointing Line Specification - WEINIG GRECON HS 120 finger jointing machine (2018) with brush-type feeder for wooden components - Two throughfeed milling machines for finger profiling - Automatic glue applicator with application quality control (GlueEye Vision system) - Pre-jointing station for components - Finger joint press, pressing length approx. 6.1 m (6100 mm) - Integrated line with ABB robot – automatic loading to the finger jointing machine - Automatic glue suction from a 1000 l IBC container with agitator Robotic loading: - Four-axis ABB IRB 6640 robot - Two pallet cells enabling continuous operation - Maximum component length fed by robot: from 110 to 600 mm - Year built for robotic workstation: 2021 Material Handling: - Roller conveyor system with turntables for feeding strips to the robot cell - FAMAD DBNA-40T DUO scissor lift at the press (automatic height adjustment, 6.0 x 1.3 m table) - Roller buffer storage for finger jointed strips – storage lanes with a total length of 82 m B) Technical parameters Material dimensions and range: - Infeed wood length: 110 – 900 mm - Maximum material width: 150 mm - Maximum material thickness: 50 mm - Finger jointed strip length: approx. 6100 mm - Number of milling stations: 2 - Number of scoring units: 4 Drive and power: - Total connected load: 75 kW - Machine weight: approx. 12,800 kg Required space and installation: - Required working length: approx. 14 m - Required width: approx. 10 m Utility connections for production line: - Electric power 400 V / 3 phase - Compressed air - Chip and dust extraction - Internet access (control and diagnostics systems) C) Application of GRECON HS 120 The GRECON HS 120 line is designed for throughfeed processing and finger jointing of short wooden components into continuous lamellas up to approx. 6,100 mm in length. Used in the manufacture of: - Furniture panels - Countertops - Construction components - Mouldings and solid wood semi-finished products D) Staffing and number of operators The GRECON HS 120 line with ABB automatic loading (2 pallet cells, alternating operation) requires just one operator. E) Production process 1. Pallets with pre-sorted wood components are placed in the loading cell. 2. The ABB robot picks the components from the pallets and feeds them onto the GRECON HS 120’s belt magazine. 3. The line machines the male and female fingers on both ends of the components in a throughfeed process. 4. The automatic glue applicator applies adhesive (monitored by GlueEye Vision). 5. The pre-jointing station assembles the pieces to the specified length. 6. The cross-cut saw trims the lamella to length and feeds it to the press. 7. The press compresses the lamella until the glue is fully cured. 8. Finished lamellas are placed on the scissor lift, quality controlled, and conveyed to the roller buffer storage.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Auction of a Weinig finger jointing machine! Hedox Rbl Nepfx Ampsl

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Set for micro-dovetail jointing for high-volume and mass production Features: – High-performance production line, – Heavy-duty working units, – High feed rates, – Accelerated handling movements ensure high throughput. Depending on the desired output, additional buffer conveyors can be integrated to speed up the production process. TENONER FC-10KZ-6 Specifications Values Hjdpfxox Idl Ho Ampsl Milling spindle 50 x 210 mm; 5,500 rpm Spindle motor 18.5 kW Chipper saw (special) 300/60 x 8 mm Saw motor 6 kW Working table width 600 mm Workpiece package height 30 to 150 mm PRESS FC-10PZ6 Specifications Values Board width/thickness 30-150 mm / 20-70 mm Finished board length 6,000 mm Line capacity up to 15,000 linear meters/shift The following modifications and upgrades have been made to the machine: - New electrical installation - Machine controller replaced with SIEMENS SIMATIC S7 and SIEMENS SIMATIC HMI panel - New infeed table before the tenoners with buffering system - New board turning mechanism – side feeder after tenoners (chain-driven turning mechanism controlled by frequency inverter) - New chain feeder before the press (length 4,500 mm) - Additional pre-scoring aggregates for finger-joint gluing – furniture board installed at the tenoners Machine dimensions: 16.5 m x 5 m

Condition: excellent (used), DIMTER HK 400 – AUTOMATIC FINGER JOINTING LINE Hjdpfxoxvniis Ampsl For sale is a fully automatic finger jointing line for wood, DIMTER Type HK 400 E/D. This is an advanced system designed to maximize efficiency and quality in the jointing of both hardwood and softwood.

Condition: used, Year of construction: 1997, Dimter Profi Joint 600 KD Finger Jointing Line The line's throughput was 2.5 boards per minute. Board dimensions: L = 900 mm, H = 180 mm, and W = 600 mm. If the maximum volume of one full board is 0.081 m³ x 2.5 = ~0.2 m³, the material can be loaded into the machine in one minute. However, this directly depends on the size of the loaded raw material. Linear meters: We processed 10,000–12,000 meters in an 8-hour shift. Using raw material 24 mm thick and 98 mm wide. Hedpfxsxmvxye Ampsl The length of the raw material ranged from 200 to 60 m. dismantled

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. Hjdjw Uf Tkspfx Ampol The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: excellent (used), FAMAD PDFD-I Wood Jointing Line 1. FAMAD DFC-60M Milling and Tenoning Machine Unit Hodpfjw Iy Nyox Ampel Input element length 170-900mm Milling height 20-155mm Milled element package width 650mm Carriage operating speed: Work 10-23m/min Return 32m/min 2. PHSL Pressing Unit Glued element width 35-155mm Glued element thickness 20-70mm Glued element length min/max 4500-6600mm Possibility of programming inter-cuts Line capacity up to 4000mb/shift 3. General information Length 15700mm Width 3350mm Power demand 48kw Year of production 2006 Very good condition

Condition: refurbished (used), Year of construction: 2007, The line for joining PDFD in the single-milling version consists of two main devices: the DFC 60M milling-tenoner (where the ends of the battens are machined) and the PHSL longitudinal press, where the elements are joined into a batten up to 6.6 meters long. Width of input package for milling-tenoner – 650 mm Width of glued elements – 30 ÷ 155 mm Length of glued elements – 170 ÷ 900 mm Thickness of glued elements – 20 ÷ 70 mm Compressed air requirement 18 m³/h Hedpfsw Hrm Nox Ampsl Operating capacity – cycles/min. approx. 2 (batten 6600) Length of glued element – up to 6600 mm The machine is in excellent technical condition!!

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, WORKING DIMENSION 250x150 mm Hsdpfjw E Etyox Ampol MILLING MOTOR 50 HP HYDRAULIC POWER UNIT MOTOR 20 HP PUSHING FORCE 40T MAXIMUM WORKING SECTION 250x150 mm EXIT ROLLER CONVEYOR NOT INCLUDED

Condition: used, functionality: fully functional, pressing force: 200 t, table width: 300 mm, cutting height with scoring (max.): 100 mm, milling spindle length: 250 mm, Equipment: 1 GRECON feed transfer with accumulation of 4 to 5 cleaned lamellas of different lengths for finger-jointing 1 GRECON double finger-jointer for deep teeth (for glulam beam production) 1 180° transfer with two-component gluing system 1 GRECON finger-jointing press 1 CNC-controlled cross-cut saw 1 outfeed table Hsdpfx Ajwz H Anempol