Lifa Glass

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Insulated glass production line Maximum IG unit size (with gas filling and secondary sealing): 2500 x 4300 mm Maximum IG unit size (with gas filling, excluding secondary sealing): 2500 x 5000 mm Minimum IG unit size: 180 x 350 mm Maximum IG unit thickness: 52 mm (up to 56 mm possible) Working direction: from right to left Line consists of: Nedpfxjy Ud Eye Amnoct - Glass washing machine VHW-25/V8, year: 2007, - SuperSpacer Applicator VSA-50/25, year: 2007, - Automatic corner sealing machine SSV-25, year: 2007, - Frame mounting station RSVN-35/25U, year: 2007, - Gas filling press FPS-35/25U2, year: 2007 - capable of pressing and filling units up to 5000 mm, - Automatic sealing robot VL-1N/25, year: 2003 for Polysulfide, shaped units and triple-glazed units. Total length of the line is approx. 44,8 m Layout can be found attached as Tech. data file See video Very good and clean condition As is Available immediately

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 9,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec sealing robot VFL-1D/25, year 2005, working direction left/right, consisting of following: - APKV-4/25, combination of inlet conveyor of sealing robot, with glass and frame measuring device and automatic 4-lane kork application machine, year 2005 - VFL-1D/25, sealing robot, including options for triple units (2 sealing cycles), , with Beckhoff PC and Lenze servo drives - DOS-1PUD + SID, material dosing for Polysulfide (base 200 litre, catalyst 20 litre) and Silicone (base 200 litre, catalyst 20 litre), year 2005 Nsdpoy Ub Swjfx Amnoct The machine will be sold as described above, EXW our warehouse in Austria. No further guarantee or warranty given. Available End of May 2026

Condition: good (used), Year of construction: 2002, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, automatic Lisec butyl application machine, left to right, year 2002, consisting of: FRS-25Z, overhead frame conveyor for supply RZVS-25/25, frame lift (down to butyl machine level), including frame measuring device LBH-25AR, automatic butyl application machine, 2x7,5 kg butyl cylinder capacity, suitable also for Georgian bars Ncodpsy Uaxpofx Amnjt RAVS-25/25, frame lift FRS-25A, overhead frame conveyor down to frame set section The machine is available from our stock in Hofkirchen/Austria and can be seen there on appointment.

Condition: used, Year of construction: 2000, functionality: fully functional, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Freestanding glass washing machine consisting of: Infeed conveyor RTV-11/30 Infeed conveyor RTV-16/30 Infeed conveyor RTV-16/30 Washing machine VHW-30/V8 with thickness adjustment from 3-60mm glass thickness Outfeed conveyor RTVN-32/30 Inspection station RSV-27/33 Accumulation section RTVN-27/30 Accumulation section RTVN-22/30 Filter system SAF-1000 Ncedoy Uarpspfx Amnet Maximum glass dimensions 5000x3000, minimum 350x180, glass thickness 3-60mm The machine is in good mechanical condition. The control system is functional, and spare parts can still be obtained for it.

Condition: ready for operation (used), 2700x5000 gas line, running from right to left, with cork applicator. For facades, four sides, steps, and glass. Ncodpoy T Rppofx Amnst

Condition: ready for operation (used), corner bending machine for aluminum and warm edge profiles, 2000x3500. Nsdoy T Rnrepfx Amnsct

Condition: good (used), Year of construction: 2003, functionality: fully functional, automatic Lisec butyl application machine LBH-25AS, additionally to standard frames also useable for Georgian bar frames, consisting of: - RFVS-25/25, inlet conveyor - LBH-25AS, automatic butyl application machine - RAVS-25/25, automatic frame lift - FRS-25A, automatic overhead frame conveyor As a completion to a full automatic spacer frame butyl application line we also have following machines available: - RFVS-25/25U, inclination changer from +6° to -6° - A2RL-25/25RN, year 2001, full automatic desiccant filling machine for profiles with 6-24 mm width All machines are available from our stock and can be seen in our warehouse in Hofkirchen/Austria Ncedpfey T Ivmox Amnot

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, input voltage: 400 V, type of input current: three-phase, Manual Lisec butyl extruder LBH-25V, year 1989, working order. For butyl application of spacer widths from 6-24 mm butyl storage cylinder 2 x 7,5 kg Ncodoy T Ipmopfx Amnjt The machine will be available end of May 2026

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, power: 3 kW (4.08 HP), Equipment: documentation/manual, functionally refurbished – immediately ready for use. Ncsdsy Tpr Nopfx Amnst

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 1,600 mm, total width: 1,400 mm, total height: 3,350 mm, input voltage: 400 V, overall weight: 750 kg, type of input current: three-phase, Lisec 2-lane cork application machine APKV-25/2, year 2001, working direction left/right, good working order The machine can be seen in our warehouse in Hofkirchen/Austria on appointment Nodpfjy Tl Tcsx Amnsct

Condition: like new (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, overall weight: 850 kg, type of input current: three-phase, Manual Lisec 2k sealing machine for Polisulfide, year 1998, will be technically and optically completely overhauled prior delivery (will look and work as new) The overhauled machine will be available from end of May/middle of June and can be seen in our overhaul warehouse in Oroahsza/Hungary. The machine is now running on PS but can be modified to Silicone on demand as an option. Ncodpfey Tl R Ijx Amnet Photos will be available after overhaul has been finished.

Condition: good (used), Year of construction: 1994, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Manual sealing machine Reinhardt Technik Maxi Hydraulik, year 1994, good working order, running on silicone The machine will be available from our stock in Austria by the end of May 2026. Max. material temperature 80° Max. system pressure 300 bar Air supply pressure 6 bar Nodpsy S Tlkjfx Amnjct

Condition: not inspected (used), Year of construction: 1993, functionality: unexamined, machine/vehicle number: 121.23.90.02.0493, input voltage: 380 V, Equipment: documentation/manual, Lisec filling station A1RL. Ncodpfxjy S Rl Us Amnet

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Lisec gas filling press for maximum unit sizes of 3500 x 2500 mm, year 2001, consisting of: Ncjdpfx Amey Swfzenet - RTVN-15/25ST, extension conveyor for measuring section, belt type, year 2001 - RTVN-15/25MZ, measuring section for gas filling press, belt type, with height and length measuring as well as measuring of glass and spacer width, year 2001 - FPS-36/25U2T, gas filling press for Argon, spindle type, with shape filling option, the machine is already equipped with Sigmatek DIAS control system and LENZE servo motors and controllers, the machine also can do 4-sided step units (bottom 50 mm, front, top and rear 130 mm) year 2001 - RTVB-15/25ST, press outlet conveyor, roller type, year 2001 The machine can be seen at our warehouse in Hofkirchen/Austria on appointment.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, total length: 8,500 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec Sealing robot VFL-1/25, year 1996, for maximal unit sizes of 3500 x 2500 mm, partly refurbished in 2025, consisting of following components: - RTVN-11/25VFE, inlet conveyor sealing robot - VFL-1/25, sealing robot including options for shape sealing according to Lisec shape catalogue and sealing of triple units in two cycles, new transport chains on inlet, outlet and take-off section Nedpfx Aoy Sv Uzjmnect - DOS-1PSD, mixing and metering station for Polysulfide, completely overhauled The machine is in very good working order. All material and hydraulic hoses as well as check valves have been replaced, pumps and metering device fully refurbished The machine can be seen in our warehouse in Hofkirchen/Austria on appointment and is available from our stock.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Lisec sealing robot VFL-1DS/25, year 2001, working direction left/right, consisting of following: - RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 Ncjdpfjy Sv Unsx Amnjt - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, - DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001, completely overhaule prior delivery Will be sold as described above, EXW our warehouse in Hofkirchen/Austria. No further guarantee or warranty given. Available from stock

Condition: good (used), Year of construction: 1990, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Lisec glass washing machine VHW-25V8, year 1990, working direction left to right, consisting of following: Ncodoy Sv Ubjpfx Amnet - RTV-27/25, extension inlet conveyor washing machine, year 1990 - RTV-38/25WE, inlet conveyor washing machine with glass thickness measurement and automatic low-e detection, year 1990 - VHW-25V8, washing machine with 8 brushes for low-e, including 2 sand filters, 2 hot water tanks and blower, year 1990 - RTVN-32/25ST, outlet conveyor of washing machine, year 2001 All machines are in good working order and can be seen in our warehouse in Hofkirchen/ Austria on appointment.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 37,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (1990/2001), left/right: - RTV-27/25, extension inlet conveyor washing machine, year 1990 - RTV-38/25WE, inlet conveyor washing machine with glass thickness measurement and automatic low-e detection, year 1990 - VHW-25V8, washing machine with 8 brushes for low-e, including 2 sand filters, 2 hot water tanks and blower, year 1990 - RTVN-32/25ST, outlet conveyor of washing machine, year 2001 - RSVN-38/25A, frame set section, year 2001 - RTVN-15/25MZ, measuring zone for gas filling press, year 2001 - RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 - FPS-36/25U2T, gas filling press for argon, year 2001 Nedpfx Amey Sv Twjnsct - RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 - RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 - APKV-25/2, 2-track cork applicator, year 2001 - RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalogue, Beckhoff PC, year 2001 - DOS-1PUD + SID, material dosing for PU (base 2 x 200 litres, liquid hardener 200 litres) and SI (base 200 litres, hardener 20 litres), year 2001 Availability now from our stock in Hofkirchen/Austria

Condition: good (used), Year of construction: 2007, functionality: fully functional, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec glass washing machine RTL-25VN, year 2007, working direction left/right, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower. The machine comes with an inlet conveyor RTVN-32/25WE (3,2 m length) and an outlet conveyor RTVN-16/25ST (1,6 m length). Ncjdpfxey Sv Tkj Amnst The brushes are still good for at least 1-2 years depending on production. The machine was used in small production only. Since it has some rusty spots we can offer it for a reasonable price. The machine is in working order and will be available from our stock in Oroshaza/ Hungary.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 37,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (2001/2007), left/right, for triple units, shape units according to Lisec shape catalogue and 4-sided stepped units: - RTVN-32/25WE, inlet conveyor (3,2 m length), year 2007 (!) - RTL-25VN, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower, year 2007 (!) - RTVN-16/25ST, outlet conveyor (1,6 m length), year 2007 (!) – RSVN-38/25A, frame set section, year 2001 – RTVN-15/25MZ, measuring zone for gas filling press, year 2001 – RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 – FPS-36/25U2T, gas filling press for argon, year 2001 – RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 – RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 – APKV-25/2, 2-track cork applicator, year 2001 Njdpfjy Sv Sgjx Amnect – RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 – VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, year 2001 – DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001 All machines were working properly until dismantling and are now available from our stock in Hofkirchen/Austria and from our stock in Oroshaza/Hungary

Condition: like new (used), Year of construction: 2005, functionality: fully functional, input voltage: 400 V, overall weight: 750 kg, type of input current: three-phase, Manual Lisec 2-k sealing machine TAL-50PS/B for Polysulfide. The machine is completely overhauled and therefore in excellent condition. As new. power: 3N/PE 400V 50Hz Ncjdpfx Amsy Sv R Nenet Load: 5,4kW The machine can be seen in our overhaul warehouse in Oroshaza/Hungary on appointment.

Condition: used, Year of construction: 2002, functionality: fully functional, MARVAL A25T6 DX - Year 2002 Ncodoy Sf Anopfx Amnet Insulating Glass Line - Washing Machine - Roll Press - Tilting Table Max. height: 2500 mm 4 brushes Working direction: right to left Overall dimensions: 15 m + 4 m (tilting table)

Condition: good (used), Year of construction: 2007, functionality: fully functional, total length: 33,300 mm, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Insulation glass production line for Low-E glass LiSEC – Austria, h=2.00 m with Gas Press, Sealing Robot, … Glass dimensions: max. 3500 (4500) x 2000 mm Year: 2007. In good condition. Inspection during production is possible by appointment. 1. AKL, vertical edge deletion system for coated glass sheets, 2. RTL-20B (2003), washing and drying machine, 6 brushes, 3. PSL-35/20V (1989), automatic assembly station for insulating glass, 4. FPS-35/20U2B, gas filling press, Ncodpfx Amoy R Tc Henjt 5. UKL-35/23VA, tilting table 6. KFL-35/22, horizontal roller conveyor 7. VFL-1D/16 + DOS (PS), automatic sealing system / robot with dosing unit, 8. A complete set of appropriate transport stations (inlet and outlet).

Condition: used, functionality: fully functional, LISEC PVB Lamination Line Ncedpfxsy I Sd Rs Amnet Composed of: TERRUZZI Autoclave – Year 2007 Washing Machine LISEC HVM26B6 – Year 2015 White Room Mangle Dimensions 5500x2800 mm

Condition: used, functionality: fully functional, FOREL Insulating Glass Line - Washing Machine (6 brushes, Low-E) FOREL VW2500 (2009) Max Height: 2500 mm Min. Dimensions: 310x160 mm Thickness: 3-40 mm - Scanner LISEC (2014) - Gas Press FOREL APG 250 (2009) Ncsdpfx Asy If Aysmnot Max. Dimensions: 2500x4500 mm Min. Dimensions: 190x320 mm Max Manual Opening: 69 mm Working Direction: Right to Left