Hme Ag

Condition: used, Hydromat HB45-12 SN 220291-81 Ppedpfx Aoyzkd Aompsr 12 Stations Capacity: 45mm Saw, Bar Feed, Inverter Configured as pictured (3-Axis CNC Slide, not included)

Condition: ready for operation (used), Year of construction: 2015, Two similar CNC rotary transfer machines Winema are available. 1) Winema RV20 Evolution Flexmaster, year of manufacture: 2016, stations: 8, cycle time: 12s, machining scope: turning/drilling/milling/grooving/slot machining, collet feed stroke: 400mm, bar diameter: 25mm, length: 4200mm, coolant pressure: 30bar, production output: approx. 2100parts/8h, control: Bosch MTX CNC. Including material handling, Knoll turbo filter system, cooling unit, discharge conveyor, oil mist extraction and bar loading magazine. 2) Winema RV20 Evolution Flexmaster, year of manufacture: 2015, stations: 8, cycle time: 12s, machining scope: turning/drilling/milling/grooving/slot machining, collet feed stroke: 400mm, bar diameter: 25mm, length: 4200mm, coolant pressure: 30bar, production output: approx. 2100parts/8h, control: Bosch MTX CNC (Sinumerik). Including material handling, Knoll turbo filter system, cooling unit, discharge conveyor, oil mist extraction and bar loading magazine. Both machines are specifically designed for the production of rotationally symmetrical components. Documentation available. An on-site inspection is possible. Individual sale possible. Ppjdpfx Ajyyplvempjr

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 61062, bar passage: 24 mm, TECHNICAL DETAILS Spindle bore: 24 mm Bar loader Model: IEMCA PRA52 F33 Year of manufacture: 2004 Maximum bar length: 3300 mm Maximum bar diameter: 9.1 mm Control system: Siemens S7-200 Drive for parting unit Stroke per slide: 7.15 mm Actuation angle: 26.565° Facing chuck PKD 80 MACHINE DETAILS Operating voltage: 230 / 400V Frequency: 50 Hz EQUIPMENT Nordmann tool monitoring with touchscreen Tool Monitor Chip conveyor (Knoll 500 K-1/450, year 2004) Oil filtering system (Knoll FKA 150) Scraper conveyor with coolant system High-pressure unit FKA / 250 Tubes with coolant connections Pedjyx Ia Nopfx Ampjpr Hydraulic unit Central lubrication Hydraulic schematic and accessories Pressure intensifier HC3 - 4.0 - B Deflection plate T-T Pneumatic accessories (for 4 cylinders) Compressed air service unit DA 300 Clamping plate for chuck TK420 Oil distributor 2-jaw chuck (Röhm, ID no. 431074, stroke 4.25 mm) Cut-off saw with gear transmission Clamping flange (diameter: 100 mm) Spindle unit complete with toothed belt drive Coolant supply Cover plates for empty stations Material stop (stroke: 60 mm) Parting unit extended by 35 mm Measuring system Z-axis Spindle unit with hydraulic NC-axis Device for rinsing the clamping jaws Change parts for material clamping Stops for hydraulic unit carrier Change parts for bar loading magazine Tools Tool holders Additional clamping with collet Further details about the machine can be found in the attached documents.

Condition: used, MIKRON Multistar CX-24 / 1500 is a Rotary transfer machine of high precision, engineered for superior accuracy and reliability. Capacities: 24 stations; max. no. of upper stations 23, lower 22, side 22; workpiece diameter up to 24 mm; production 70 pce/min (multiple-cycle 280 pce/min). Key specs: spindle speeds 500–32,000 t/min; voltage 50 Hz 3x 400 V; air connect 6 bar; machine weight ~3500 kg; control cabinet ~1200 kg. Capable of achieving tight tolerances; typical applications include automotive, aerospace, medical, watchmaking and machine tools Ppodpfsyxny Nex Amper

Condition: ready for operation (used), Year of construction: 1993, A multi-station transfer machine Riello with drilling and tapping units is available. Horizontal working units: 2x drilling units, 2x tapping units, 1x combined unit. Radial working units: 1x drilling unit, 1x tapping unit, 1x combined unit. Quill stroke: 100mm, spindle holder: SK40, rotary table type: TG 320, turret stations: 5, chuck diameter: 200mm, jaw opening travel: 12mm+12mm, spindle holder-chuck center distance: 225mm, total connected load: 23kW. Machine dimensions X/Y/Z: approx. 3700mm/3400mm/3050mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible. Ppedpfx Amsytgpwopsr

Condition: used, Year of construction: 2005, Type: Multispindle machine Make: Buffoli Model: 2D-TRIB10-6 CNC Ppsdpfx Aoyn Hf Ujmper Year of Manufacture: 2005 Condition: Used Quantity: 1

Condition: new, Year of construction: 2024, working width: 1,500 mm, sheet thickness steel (max.): 20 mm, Hydraulic guillotine shear – built-to-order machine (delivery time approx. 10–14 weeks) – including foot switch, touchscreen, rear installation area with light barrier monitoring, automatic/electric cutting gap adjustment, automatic/electric cutting angle adjustment, hydraulic hold-down, motorized backgauge up to 1000 mm depth - Images similar - Ppjdpfxeynatls Amper

Condition: new, Year of construction: 2025, working width: 3,000 mm, sheet thickness (max.): 10 mm, Hydraulic guillotine shear – made to order (delivery time approx. 10–14 weeks) – includes foot pedal, touchscreen, rear operating area with light curtain monitoring, automatic/electric blade gap adjustment, automatic/electric cutting angle adjustment, hydraulic hold-down, motorized backgauge up to 1000 mm depth Psdpsym Uv Eofx Ampspr -Images similar-

Condition: new, Year of construction: 2026, functionality: fully functional, Flexbility: Our Rotaflex machines stand out due to their exceptional flexibility, surpassing that of competitors. These machines are versatile, capable of performing a variety of operations including turning, milling, threading, and recessing. Each station operates independently with up to 5-Axes, ensuring efficient and precise machining. Advanced Turning Capabilities: Ppodpsyg Nwdofx Ampor Rotaflex machines are designed for real turning operations, featuring chucks that can simultaneously position on the B axis and perform turning at speeds up to 6,500 RPM. Please find the demonstration videos below: Innovative Plug-and-Run Chucks: Our Plug-and-Run Chucks enable swift chuck changes within seconds, allowing for seamless transitions between jobs. This technology sets Technica apart in the rotary transfer machine industry. Why Choose Technica Rotaflex Machines: Technica machines offer unparalleled versatility and precision, making them ideal for mass production environments that demand high-quality and adaptable machinery. Combining Swiss engineering precision with the multifunctionality, our machines provide reliable and efficient performance.

Condition: used, Technica brand, Stemoflex model rotary transfer machine Ppjdpfoydcm Hsx Ampsr

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 8450-02-001, rotary table diameter: 4,000 mm, Equipment: chip conveyor, TECHNICAL DETAILS Rotary indexing table diameter: 4,000 mm Machining stations: 12 Axis configuration: 4 × 3 axes, 8 × 2 axes Clamping chucks: 12 units for tool holders Drilling units: NC-controlled Ppsdpjxur Rusfx Amper Accessory systems Chip conveyor: Knoll, type 500K-1/500, year of manufacture 2001 Coolant system: available Filtration system: available Measuring device: integrated MACHINE DETAILS Identification number: 8450-02-001 Customs tariff number: 84573010 Weight Machine: 6,000 kg Control cabinet: 800 kg Coolant system: 600 kg Dimensions Working height: 1,170 mm Machine height: 2,220 mm Footprint: 5,231 x 4,540 mm EQUIPMENT - Rotary indexing table with large 4,000 mm diameter for extensive machining operations - 12 NC drilling units with 12-piece clamping chuck setup - Integrated chip conveyor of type Knoll 500K-1/500 - Complete system with filtration and coolant system - Measuring system and automatic loading and unloading for seamless automation

Condition: good (used), Year of construction: 2010, Rotary table Fabr.WEISS Type: TC 220T Year: 2010. Pedpfxjxr Dh Hj Ampjpr

Condition: used, _____ 2 Pieces of Pfiffner RT 100-12 Description: Year of manuf. : 2013 Control : Siemens 840 D Rotary-Indexing-table/Spindle: Clamping stations:12 motorised spindles Drive:Torque drive, water-cooled Position measuring system:Direct Switching time:1.5 seconds Spindles:Water-cooled motor spindles C-axes:0.001°, hydraulic clamping Speed:5,500 rpm Power:11 kW Clamping device:Chuck Basic modules: Technology:Positioning module, 3-axis X-axis:50 mm Y-axis:100 mm Z-axis:100 mm Position measuring systems:Direct in all axes Coolant supply:Integrated : : Workpiece size (max.):100 x 100 x 100 mm Station 1: Horizontal:feeding of raw parts (indexing conveyor + Stäubli robot) Vertical:Measuring raw part Station 2: Psdew Si T Aspfx Ampepr Horizontal:4-fold turret without drive Vertical:Measuring reclamping error (C-axis zeroing) Station 3: Horizontal:4-fold turret without drive Vertical:Not used Station 4: Horizontal:4-fold turret without drive Vertical:Not used Station 5: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 6: Horizontal:4-fold turret without drive Vertical:Not used Station 7: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 8: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 9: Horizontal:4-fold turret without drive Vertical:Not used Station 10: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 11: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 12: Horizontal:Charging/discharging unit with double swivelling gripper + discharging belt Equipment: Chipmanagement:Chip conveyor High preassure unit:Cooling unit 50 bar Toolmonitoring:Toolbreaktagecontrol ARTIS Rawmaterialfeed:Conveyorbelt with robot Finishpartremoval:Conveyor with 3-way switch Oilmistseparation:Electrostatic filter Fire extraction system:Kraft + Bauer Part labelling:Laser Parts cleaning:HESO cleaning system

Condition: not inspected (used), Year of construction: 1967, Manufacturer: Steinel Model: 5 Station Rotary Transfer Drilling Machine BE 10 VK Year of Manufacture: 1967 Weight: approx. 3,000 kg General / Technical Data: 5-station rotary transfer special drilling machine for horizontal drilling with multi-spindle heads Drilling units: 4 units Station 1 – loading and unloading Station 2 – horizontal drilling unit type: BE 10 VK Ppodpfow H Rh Sjx Amper Station 3 – horizontal drilling unit type: BE 10 VK Station 4 – horizontal drilling unit type: BE 10 VK Station 5 – horizontal drilling unit type: BE 10 VK Feed of drilling units: mechanical feed via quill Drill heads: multi-spindle drilling units Rotary table: mechanical indexing in 5 positions, Ø 400 mm Workpiece clamping: hydraulic, via centric mandrel, workpiece Ø approx. 80 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special features: • Machine is designed for large-scale production • Features a robust cast iron machine table with lateral chip removal and separate coolant tank • Automatic safety guard door • Equipped with a 5-station rotary indexing table • Heavy cast iron machine table, ideal for the retrofit or rebuilding of a special purpose machine • Suitable for refurbishment or conversion

Condition: not inspected (used), Year of construction: 1969, Manufacturer: Steinel Model: 6-Station BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical specifications: 6-station rotary transfer special-purpose drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 pcs Station 1 – Loading and unloading Station 2 – Vertical drilling unit, type: BE 10 VK Podpfew H I R Rjx Ampopr Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit, type: BE 6 VK Station 5 – Horizontal spindle unit, type: BE VK, with additional guide. Mounting: slip bush Ø 28 mm Station 6 – Horizontal drilling unit and vertical tapping unit, type: BE 6 VK Feed advance for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary index table: mechanically indexed in 8 positions, Ø 400 mm Workpiece clamping: manual, via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production use • The machine is equipped with a robust cast iron machine table with chip disposal at the rear and a separate large coolant tank (rear outlet) • Safety light curtain (Sick) • Extensive accessories: spare parts, spindle units, and rotary indexing table • The machine features a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Condition: ready for operation (used), Two identical rotary transfer machines Eubama including filtration systems are available. Workpiece diameter: 60mm, workpiece length: 320mm, clamping stations: 10, cycle rate: 20/min, spindle stroke: 100mm, drilling capacity steel/brass: 20mm/30mm, threading capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible. Ppjdjw Hglmopfx Amper

Condition: used, Year of construction: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of Manufacture: 1971 Weight: approx. 4,500 kg General Information / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling operations in workpieces, with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 3 – Vertical drilling unit, type: BE VK, collet chuck mounting Station 4 – Horizontal drilling unit, type: BE VK, spindle mount: sleeve Ø 36 mm Station 5 – Vertical spindle unit, type: BE VK, spindle mount: sleeve Ø 28 mm Podpfow E Hpvsx Ampjpr Station 6 – Horizontal drilling unit, type BE VK with additional guide, spindle mount: sleeve Ø 28 mm Station 7 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 8 – Vertical spindle unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 28 mm Drilling feed: mechanical feed via quill Rotary indexing table: mechanically indexing, 8 positions, Ø 500 mm Workpiece clamping: manual via collet Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • Machine is designed for high-volume production • Features a robust cast machine table with chip conveyor to the rear and a separate large coolant tank • Extensive range of clamping devices and auxiliary tools included • The machine is equipped with a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Extremely stable machine bed, also ideally suited for rebuilding as a special-purpose machine

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Ppjdpfxew Emx Re Ampsr

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 110 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 150 mm, workpiece length (max.): 40 mm, workpiece width (max.): 80 mm, The rotary indexing machine is comprehensively equipped; the machine's original price is approximately €3,000,000. No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 110 mm Travel distance Y-axis: 150 mm Travel distance Z-axis: 150 mm Work spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: Max. 24 Number of tools on the machine: Max. 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Table positioning repeatability: Ø 20 x 60 mm MACHINE DETAILS Ppsdpfx Aowy I Tlompsr Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Chip conveyor Rack for oil tubing, extraction system and tubing Loading systems Vibrators Cabinets / side panels / upper channel / cabinet tops Platform Polycarbonate partitions Fire protection system with control console Further information on transportation dimensions can be found in the attached packing list.

Condition: used, Year of construction: 1963, functionality: unexamined, Manufacturer: Steinel Model: 6 Stations Year of manufacture: 1963 Weight: approx. 2,500 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical thread-cutting unit Feed of the drilling units: mechanical feed via quill Drilling heads: single-spindle Ppedswyn S Ujpfx Ampjr Tool diameter: approx. Ø3 mm to Ø8 mm Workpiece clamping: manually operated via collet chuck Machine dimensions (W x D x H): approx. Ø 2,000 mm x H = 2,200 mm Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special features: • The machine is designed for large-scale production • The machine features a sturdy machine table with chip discharge to the underside of the table center with a separate large coolant tank • Extensive set of clamping and auxiliary devices included • The machine is equipped with a 6-station rotary indexing table

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, 3 Rotary Indexing Systems + 3 Linking Robots OVERVIEW - Bar feeder - Rotary indexing system 1 (cutting + machining clamping 1) - Rotary indexing system 2 (machining clamping 2) - Placement on conveyor belt - Marking - Deburring unit - Stacking cell with ejection of measuring parts TECHNICAL DETAILS Process description Step 1: Manual placement of bars onto the bar magazine Step 2: Automatic insertion of the bar and cutting off the workpiece Step 3: Robot takes the workpiece from the saw clamp and transfers it to the clamping fixture of rotary indexing system 1 (station 1) Rotary indexing system 1 (machining clamping 1) Station 2: Contour milling left and right Station 3: Contour milling top Station 4: Slot milling (2x), drilling Ø 6.5 mm (4x) Station 5: Drilling Ø 5 mm (4x), threading M6 (2x), slot milling 20 × 5 mm, drilling Ø 7.5 mm (2x) Station 6: Transfer to second system Rotary indexing system 2 (machining clamping 2) Station 1: Robot takes the part from station 6 of system 1 and places it into the clamping fixture of the second rotary indexing system Station 2: Contour milling bottom Station 3: Slot milling (2x) Station 4: Contour milling bottom (2x) Station 1 (again): Unloading onto conveyor belt Cycle time: 25 s Tolerance: +5% Bar feeder Bar magazine: for 2000 - 6000 mm bar material Magazine width: approx. 2100 mm Insertion height: approx. 1200 mm Parts buffer: 10 bars Rotary indexing system 1 - SEMA RTA 55/6-SA-NC-R Control: Siemens Sinumerik 840 D sl Spindle units: 5 Tool turret: 1 Feeds: 14+1+5 NC axes Rotary indexing system 2 - SEMA RTA 55/4-NC-R Stations: 4 Control: Siemens Sinumerik 840 D sl Spindle units: 4 Feeds: 9+1+3 NC axes Discharge conveyor Chain conveyor: workpiece carrier made of plastic Incline: approx. 3° Length: 8,000 mm Podpswqf R Njfx Ampjpr Part inquiry: at loading station / marking station / unloading station Rotary indexing system 3 - SEMA REA 30/5-6S-NC-R Number of positions for deburring: 5 Control: Siemens Simatic S7 Loading station: 1 Machining units: 6 Extension of deburring unit: blowing off of workpieces Robot: for loading and unloading the deburring unit, as well as stacking with SPC drawer MACHINE DETAILS Noise level: 80 dBA Connection: 400 V, 50 Hz Model RTA55/6-SA-NC-R Connected load: approx. 95 kW Dimensions (L × W × H): 5,500 × 4,400 × 3,700 mm Weight: approx. 32,000 kg Model RTA55/4-NC-A Connected load: approx. 65 kW Dimensions (L × W × H): 4,500 × 4,500 × 3,700 mm Weight: approx. 20,000 kg Model REA 30/5-6S-NC-R Connected load: approx. 30 kW Dimensions (L × W × H): 3,000 × 3,000 × 3,000 mm Weight: approx. 10,000 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: HB32-571, Equipment: chip conveyor, documentation/manual, TECHNICAL DETAILS Number of CNC units: 8 Control system: Siemens Chip conveyor: Knoll Filter system: Vacuum rotation filter High pressure system: Combiloop Loading magazine: 3 m UNIT LAYOUT PLAN Station 1: Sawing Station 2: Drilling hydraulics Station 3 H: CNC turning Station 3 V: Drilling hydraulics Podpfjwkd A Dex Ampopr Station 4: CNC turning Station 5: CNC turning Station 6 H: Drilling hydraulics Station 6 V: CNC turning Station 7: No unit Station 8: CNC turning Station 9: CNC turning Station 10: Drilling hydraulics Station 11: Drilling hydraulics Station 12: CNC turning Station 13: CNC turning Station 14: Milling Station 15: Drilling hydraulics Station 16: Drilling hydraulics EQUIPMENT - Pedestal - Declaration of conformity

Condition: excellent (used), Year of construction: 2010, EUBAMA S6 is a 2010 model machine. Number of clamping (jaw) stations: 8 2-jaw chuck system Maximum clamping diameter: 40 mm Maximum workpiece length: 450 mm Maximum output (cycle/minute): 40 Hydraulic clamping system Machine control: CNC Siemens 840 D Number of processing units: 15 Ppedpev Ef N Asfx Ampor PRA 52 P IEMCA drive Magazine loading capacity: 4 meters KNOLL chip conveyor KNOLL coolant tank Machine is in working condition

Condition: used, _____ Description: Year of manuf. : 2018 Control : Fanuc 30i-B In General: Year of construction:2018 Control system:Fanuc Processing stations:5 pieces Loading station:1 piece Travelling range: X-axis:450 mm Y-axis:500 mm Z-axis:450 mm Rapid traverse X/Y/Z:50 m/min Turret: Number of stations:8 Speed:13,300 rpm Torque:58 Nm Tool holder:HSK 63 C Workpiece/device: Dimensions max.:350 x 350 x 350 mm Max. permissible mass:250 kg Media supply line:6 pieces NC swivelling rotary table: Pedpfxevr Az Nj Ampjpr A-axis:+/- 150° B-axis:360° Max. load:250 kg Table diameter:320 mm Equipment: Loading/unloading:Fanuc Robot M20i-A Chip removal:2x chip conveyors Coolant supply:IKZ system, 20 bar Position measuring systems:Direct in all axes

Condition: ready for operation (used), Year of construction: 2002, Stations: 6, power: 40kW, control: Siemens. Including upstream Fischer separating head, Festo feeder, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip preparation with ejector and hydraulic unit. Documentation available. On-site inspection is possible. Ppsdpfsu T Rhbsx Ampjr