Kusters Poels

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Hfedeykuiajpfx Afnec Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) Hfodpfxeykuh Ns Afnoc ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps Hedpfx Afjykuhponsfc TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Hjdpfx Ajykuhcefnsfc Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS04, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Hodpfxoykug Ss Afnjfc Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MARATHON01, MARATHON semi-automatic manual film wrapper TECHNICAL DETAILS The world's only "PATENTED" non-electrically powered mobile stretch wrapper, Hfjdpfx Asykuf Iefnec capable of wrapping pallets with LLDPE stretch film The machine wraps loads of any shape, weight and size The use of pre-stretched film with a roll diameter of max. Ø 230 mm is recommended Min. load dimensions: 650 x 400 mm Min. load weight: 50 kg Wrapping height (including pallet) 2000 mm Easy to operate without having to rely on the power of a motor Manual movement by the operator The film carriage is moved up and down manually The machine features simplified functions Replaces hand wrapping MANUAL CHANGING OPTIONS The operator is the motor, windings up and down freely selectable FILM SLIDE TYPE "FM" WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 230 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm Hfedpfoykud Rjx Afnsc 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) Hedpfjykud Dsx Afnefc F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs Hsdpfx Asykudksfnefc F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Hedpfx Ajykuddefnjfc Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Hodpfjykucyex Afnofc Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm ramp mounting frame Light scanner for black products Other systems available from the Ludwigsburg warehouse.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) Hodpsykucmofx Afnsfc F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable Hsdpfxsykub Ae Afnefc F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage02, Exhibition machine, like new. SYNTHESI integrated with scale Pallet weighing system integrated in the machine FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE) Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ TECHNICAL DETAILS: Turntable 1500mm (Optional 1650mm) Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Hfedpsykubvjfx Afnjc Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Other systems available from the Ludwigsburg warehouse.

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S25Lybra04, Exhibition facility - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Hsdsykubijpfx Afnofc Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25SFERA06, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2000 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min Hfjdpeykua Sjfx Afnsc F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 2400mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25NEOS05, Mobile stretch winder NEOS TECHNICAL DETAILS: HMI touch panel 7" two maintenance-free AGM batteries 12 V - 120 Ah connected in series Standard charger: 230 V - 1L+N+PE - 50 HZ Autonomy 200 - 300 pallets per load High frequency battery charger with LED indicator Winding height machine (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop function of the machine according to CE standards Ø 22 mm ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: F01 - 01 - cross winding (up/down) F01 - 02 - Single wrap (up only or down only) Hedpfxoykua Es Afnefc F01 - 03 - Complete wrap cycle with foot wraps at the same starting height F01 - 04 - Fast cycle (with limited or no foil overlap) F01 - 05 - layer cycle F01 - 06 - Economical winding program Soft start cycle for applying edge protection Winding cycle with reinforcement and adjustable number of windings Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: 99 storable winding programs All function parameters can be set via the display F00 - Screen lock program change Adjustable machine speed around the pallet up to 90 m/min Lifting carriage speed can be adjusted up and down independently of each other Lift carriage speed from 1.3 up to 5.4 m/min Lifting carriage speed down from 1.3 to 5.4 m/min Number of wraps on the pallet foot (1 - 10 wraps) Number of wraps on the pallet head (1 - 10 wraps) Adjustment pallet wrapping height Foil application tension foot & head winding / ascent & descent independently adjustable Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable Ergonomic height for foil change Display foil consumption (option for PRS - PS) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE: Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% - PATENTED "ARYA" SYSTEM FOR PRS / PS - ARYA system for automatic foil blowing and cutting, incl. infrared remote control -Manual cord formation on the foil carriage to strengthen the winding -Automatic cutting unit (FE, PRS & PS) - Machine version for temperatures down to -5° C (only version without HMI touch panel) Other systems available immediately from the Ludwigsburg warehouse Illustration similar.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY Hedpfxoykty Ds Afnjfc F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS06, Exhibition facility Hfedpfx Aoyktv Sofnoc Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control Hfjdpfx Afoyktrtonjc

Year of construction: 2007, condition: excellent (used), Mobile pallet wrapper Ref. no. 3714 Manufacturer: Robopac Type: Robot PFS Year of manufacture: 2007 Technical data (approx.): * Maximum wrapping height: 2700 mm * Maximum width: unlimited * Minimum width: approx. 600 mm * Adjustable travel speed * Adjustable film carriage speed * Film width: 500 mm * Maximum core diameter: 76 mm * Own weight: approx. 370 kg * In very good condition! Hfedpfx Afoyidugonsc

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Good day, We are pleased to offer you, without obligation, a used, self-propelled stretch/wrapping robot (pallet wrapper), manufacturer PKG, model Motion. Manufacturer: PKG SRL Model: Motion Year of manufacture: 2018 Maximum rotation speed: 93 m/min. Battery specification: Standard AGM/gel batteries 12V – 110Ah; both batteries were replaced at the end of last year. Charging cycle: 8-10 hours Pallet dimensions: minimum 500 x 500 mm, maximum unlimited Maximum wrapping height: 2,200 mm Minimum wrapping height: 500 mm Turning circle radius: 1,100 mm Electrical connection for battery charger: 230V, 50Hz Charger: High-frequency charger integrated in the machine Machine weight: approx. 400 kg Film: Type: Machine stretch film Roll diameter: max. 250 mm Roll height: 500 mm Roll weight: approx. 20 kg Note: Hedpfx Asyg Nyxefnefc The above technical data were taken from the operating manual, manufacturer brochures, or other sources. We cannot guarantee the accuracy or completeness of this information. Scope of delivery: 1 used stretch/wrapping robot (pallet wrapper), type Motion by PKG SRL, without film rolls. Application area and condition: The machine was used in a picking and shipping department for stretch-wrapping palletized goods. The unit is fully operational, in good condition, and can be inspected and tested under power. Both batteries were replaced at the end of last year. Remark: The machine will be available for collection from March 2026. Until then, the robot will remain in use. We would be delighted if this machine is of interest to you. Your service team, Mertens & Frowein GmbH

Year of construction: 2022, condition: as good as new (ex-display), functionality: fully functional, 331.60/125 ATIS 125, 400V III+N 1x 40380 Infeed & outfeed top pressers – automatic fitting (2 units) Hedpsyfhlkofx Afnsfc 3x BM0820RP Powered rough belt conveyor, W800xL2000 1x DPBP/125 Double automatic dispenser for bubble wrap, MOD Helios 125 1x 40283 End of film roll warning 1x 40319 Extra control 1x 40385 Photoelectric saturation sensor 1x 13672 3-color signal beacon 4x F25.231500C Colorless stretch film roll, 25 cm wide

Condition: excellent (used), Automatic pallet wrapper Ref. no. 3793 Manufacturer: PME Model: PME 35 Hfjdpfxsyc Exis Afnjc * Turntable positioning via fixed stop * Number of bottom and top wraps adjustable * Turntable diameter: 1650 mm * Maximum wrapping height approx. 2400 mm * Own weight approx. 450 kg * Suitable for Euro pallets and block pallets!!! * Ramp optional * Very good condition

Condition: excellent (used), Fully automatic pallet wrapper with film pre-stretch Inv. no. 3782 Manufacturer: Matco Model: A 416 - H * Turntable positioning via fixed stop * Adjustable number of bottom and top wraps * Turntable diameter: 1650 mm Hfsdpfx Afeyc Eu Denjc * Max. wrapping height: approx. 2700 mm * Net weight: approx. 500 kg * Very good condition * Exclusive ramp included