M.S. Metall-&Schweißtechnik

Condition: good (used), Year of construction: 1999, operating hours: 12,506 h, functionality: fully functional, X Y Z 710 500 500 Heidenhain 426-430 IKZ Lhsdpfx Aasx Nur He Eor

Condition: used, Year of construction: 2012, functionality: fully functional, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 16 kVA, torque: 95 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,100 kg, table width: 500 mm, table length: 800 mm, rotational speed (max.): 16,000 rpm, overall weight: 5,000 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 18 W, tool length: 305 mm, tool diameter: 77 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this used AGIE CHARMILLES MIKRON VCE 800X PRO vertical machining center, year of manufacture 2012. Year of manufacture: 2012 Control: iTNC530 Supply voltage: 3x400 VAC + PE Frequency: 50/60 Hz Protection current: 32 A Control voltage: 24 V DC Connected load: 16 kW Noise level: 76 dB(A) Weight: 5000 kg Power factor cos φ: 0.9 Serial number: 1033618 Revision: V6.2 Documentation valid as of: 17.03.2010 Prepared for 4th-axis as well as additional Lehmann 4th axis Complete, fully enclosed machine cabin • Two side windows, large front doors • Efficient work area lighting • Telescopic covers for X, Y, and Z axes • Spiral chip conveyor with mechanical double filter • Automatic central lubrication • Side-mounted tool changer • Manual washdown gun • Manual compressed air gun • Machine status signal lamp • 10,000 rpm spindle (Pro-X 16,000 rpm) • Water-cooled spindle head • Active spindle chiller (14,000 / 16,000 rpm) • Side chip flushing system (Mikron VCE 600Pro – MIKRON VCE 1400Pro) • Coolant and air nozzles on the spindle head • Extendable coolant tank • Threading without compensating holders • Heidenhain iTNC530 control • Portable electronic handwheel • Heidenhain smart.NC • Tool management for up to 30,000 tools Lsdpjx Nikwsfx Aa Eshr • Ethernet network connection and RS-232 interface • Prepared for additional options If you have any questions or need further information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2015, Machine type: 5-Axis Machining Centre (Simultaneous) Year of manufacture: 2015 Control: HAAS CNC control to DIN 66025 X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Spindle motor power: 22.4 kW (vector drive) Spindle taper: SK 40 (DIN 69871) Max. torque: 122 Nm (at 2,000 rpm) Table dimensions: ∅ 630 x 500 mm Max. workpiece weight: 300 kg Number of simultaneously controlled axes: 5 C-axis rotation range: 360° continuous B-axis swivel range: -35° / +110° Rapid traverse rates (X, Y, Z): 30.5 m/min Tool magazine (positions): 40+1 (side-mounted) Coolant system capacity: 284 litres Machine weight: approx. 8.2 t Cooling systems: - Through-Spindle Coolant (TSC), 21 bar - Programmable coolant nozzle (P-COOL) - Additional coolant filtration system (25 μm) - Hand rinsing gun with coolant Measuring and probing systems: - RENISHAW probing system (WIPS-R) - Work probe - Tool measurement system Chip management: - Hinged belt chip conveyor Ljdpfex Nh N Ssx Aa Eshr Software & Control: - High-Speed Machining (HSM) - Ethernet interface - Macros - Coordinate rotation and scaling

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 Number of simultaneous axes: 5 Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] B axis swivelling stroke: +110 [°] / 350 [°] Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Lubrication tank capacity: 284 [l] Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant x1 high-pressure coolant pump 21 bar x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe Lsdex Nf Tbjpfx Aa Eshr x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: FANUC, controller model: Doosan-FANUC 21i-MB, table width: 430 mm, table length: 920 mm, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 2, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, Tool Standard is CAT-40, 30 pieces of Tool-holders are attached to this machine 4th axis: rotary table included; Renishaw probe ready. through spindle coolant; spindle chiller; Lodpfx Asx Ncpgea Eehr rigid tapping; rapid traverse 36,000 mm/min; manual pulse generator; air blast; coolant tank & pump; chip tray;

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: FANUC, controller model: Doosan-FANUC i Series, table width: 430 mm, table length: 920 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 11 W, number of spindles: 2, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, Tool Standard is CAT-40, 30 pieces of Tool-holders are attached to this machine Ledpfex Nbtdox Aa Eehr

Condition: used, Year of construction: 2011, machine/vehicle number: 149002, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, controller manufacturer: OSP, controller model: P200, table width: 500 mm, table length: 500 mm, The Okuma MB 5000H 4-axis machine was produced in 2011. It features a robust horizontal machining center design with a 500 x 500 mm pallet, capable of handling a maximum load of 500 kg. The spindle supports speeds from 50 to 15,000 min-¹ with an SK40 taper for increased versatility. Additional features include a chip conveyor, a shower system, and provision for a Renishaw probe. If you're looking for high-quality milling capabilities, consider the Okuma MB 5000H machine we have for sale. Lhodpfxsx I Nwnj Aa Eor

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, table load: 300 kg, rotary table diameter: 500 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 12,118 h, spindle motor power: 22 W, spindle nose: BT40, number of slots in tool magazine: 40, Through-spindle coolant 20 bar Filtration Belt chip conveyor Lhjdpfxjx I Nutj Aa Esr Workpiece probe Tool probe Robot interface preparation Automatic (side) door Portable handwheel Washing gun High-speed machining

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller model: OSP-P200M, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 460 mm Travel Z-axis: 460 mm Spindle speed range: 50 - 15,000 rpm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 32 m/min Tool magazine: 32 positions Lhedpfx Aajx I Ecyo Eer MACHINE DETAILS Control: OSP-P200M Main drive motor: 22 kW Dimensions & Weight Required space (L x W x H): 2,850 x 2,810 x 2,750 mm Machine weight: 7,200 kg EQUIPMENT Chip conveyor Internal coolant supply Standard filtration unit

Condition: excellent (used), Year of construction: 2015, operating hours: 7,110 h, functionality: fully functional, DMG DMU 65 Monoblock 5-Axis Machining Centre (2015) Manufacturer: DMG Model: DMU 65 Monoblock Year of manufacture: 2015 Condition: Used, very good, still in production. Power-on hours: 21,336 h Spindle hours: 7,112 h Control: Heidenhain iTNC 530 X-axis: 735 mm Y-axis: 650 mm Z-axis: 560 mm Tool holder: SK40 Spindle speed: 10,000 rpm Lhsdpfx Aox Iwb Iea Esr Chip conveyor Internal coolant supply (IKZ) 40 bar Band filter system 3D probe Documentation Additional accessories optional.

Condition: used, Year of construction: 2015, functionality: fully functional, We are offering this used Haas VF-3 vertical machining center, year of manufacture 2015. Lhodpfxsx Ivf Sj Aa Eor If you have any questions or require further information, feel free to send us a message or call us.

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Ledpex Iikbefx Aa Eehr Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: ready for operation (used), Year of construction: 2017, General Data Machine weight 4350 kg Measurements height 2310 mm Measurements depth 1950 mm Dimensions Machine Length 3000 mm Main Drive Number of axis 3 Lodpfx Aaex H U Eus Eshr Spindle Speed 10000 RPM Spindle motor power 9 kW Movement X-Axis Movement 760 mm Z-Axis Movement 460 mm Y-Axis Movement 440 mm Tools Max weight 8 kg This 3-axis Optimum Optimill F150 was manufactured in 2017 and features a Siemens Sinumerik 828D control system, a vertical spindle type SK40 with a speed range of 10-10,000 rpm, and a carousel tool changer with a 16-tool capacity. It supports a maximum table load of 350 kg and includes a screw-type chip conveyor. If you are looking to get high-quality milling capabilities, consider the Optimum Optimill F150 machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2011, Hurco VMX60SR 5 Axis CNC Vertical Machining Centre With Hurco Winmax Dual Screen Control Table Dimension 1,670 x 660mm (5 'T' Slots). Rotary Table Dimension Ø610mm (5 'T' Slots). Axis Travel 'X'=1,525mm, 'Y'=660mm, 'Z'=610mm, 'B'=0-92°, 'C'=360°. Maximum Rapid Traverse 30m/min. Maximum Spindle Speed 12,000rpm. Spindle Taper ISO 40. S/No: S374F2210122DFDCH (2011). Lhedpjx H Tbbofx Aa Eer With Spindle Inspection Probe, Renishaw Toolsetter, Coolant System, Chip Conveyor, Filtermist FX7002 Mist Extraction Unit, Wash Gun, Handwheel, Signal Tower. Please View Last Service Report 27/05/2025 (Attached). Note: Spindle Tooling & Vices Not Included.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 8,406 h, Control Unit Brand FANUC Movement Lhjdpfxox H A N Io Aa Ejr X-Axis Movement 700 mm Z-Axis Movement 330 mm Y-Axis Movement 400 mm Main Drive Number of axis 5 Spindle Speed 10000 RPM This 5-axis FANUC Robodrill α-D21LiA5 was manufactured in 2014. It features a spindle speed of 10,000 rpm, a 21-tool magazine, and a coolant tank capacity of 100 liters. The table measures 850 mm by 410 mm, supporting a maximum workpiece weight of 300 kg. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2015, Control Unit Brand HEIDENHAIN Model iTNC 530 HSCI Main Drive Number of axis 3 Movement X-Axis Movement 755 mm Z-Axis Movement 500 mm Lhedpfex H A Nhox Aa Esr Y-Axis Movement 500 mm This 3-axis KOVOSVIT MAS MCV 754 QUICK was manufactured in 2015. It features a Heidenhain iTNC 530 HSCI control system, ISO 40 tool interface, and travels of 755 mm in X, 500 mm in Y, and 500 mm in Z. The machine includes a Renishaw probing system, Kitagawa Vice VE125LN, and a full set of tool holders and collets. If you are looking to get high-quality milling capabilities consider the KOVOSVIT MAS MCV 754 QUICK machine we have for tact us for more information. Application Types Milling

Condition: used, Year of construction: 2010, X axis: 700mm Y axis: 560mm Z axis: 560mm Table Load: 500kg Magazine positions: 30 / BT40 Max. spindle speed: 12000RPM Spindle oil chiller Lodpjx Hypxofx Aa Eshr Through spindle coolant Floor space W x D (mm) 2,235 x 2,420

Condition: ready for operation (used), Year of construction: 2008, Travel X - Y - Z axis: 800 x 500 x 500 mm table clamping area: 900 x 520 mm rapid traverse X - Y - Z axis: 30,000 mm/min spindle speed range: 1 - 10,000 rpm tool taper: ISO 40 drive power - main spindle: 10 kW tool magazine: 24 positions Lodpox Hxz Tefx Aa Eohr year of construction: 2001 control: FANUC Oi-MC machine weight approx.: 5,800 kg

Condition: good (used), Year of construction: 2016, Ref. -No.: 10411 Manufacturer: BROTHER Type: Speedio S700X1 Year of construction: 2016 Type of control: CNC Control: BROTHER CNC Storage location: Halberstadt Country of origin: Germany X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Acceleration time: 0,30 sec Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Further information: THREAD Speed: 6,000 rpm Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Lsdpfjx Hnx Uox Aa Eohr Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2012, VF - 2YT Year 2010 & 2011 - 3 units each & 2012 - 1 unit Travels S.A.E METRIC X Axis 30.00 in 762 mm Y Axis 20.00 in 508 mm Z Axis 20.00 in 508 mm Spindle Nose to Table (~ max) 24.0 in 610 mm Spindle Nose to Table (~ min) 4.0 in 102 mm Spindle S.A.E METRIC Max Rating 30.0 hp 22.4 kW Max Speed 10,000rpm Taper BT40 ATC 24 Bearing Lubrication Air / Oil Injection Air / Oil Injection Cooling Liquid Cooled Liquid Cooled c/w RT-160 and RT-160-2 Rotary Table Lhedsx Hc Uqopfx Aa Eer c/w Tool measuring system 7 units

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 5260 kg Main Drive Spindle Speed 32000 RPM Spindle motor power 8000 kW Movement X-Axis Movement 760 mm Z-Axis Movement 510 mm Y-Axis Movement 500 mm This 3-axis VICTORY VC F76 vertical machining center was manufactured in 2021. It features Fanuc Series Oi-MF Plus control, with axis traverses of X-760, Y-500, Z-510, and rapids at 32m/min. The table size is 840x500, supporting a 500 kg workload, and it includes a 24-tool magazine. Machine weight is 5260 kg. If you are looking to get high-quality milling capabilities, consider the VICTORY VC F76 machine we have for sale. Contact us for more information. Lodpfxjx Hbmls Aa Ejhr Application Types Milling

Condition: used, Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: Haas, workpiece weight (max.): 1,588 kg, total height: 3,023 mm, total length: 4,089 mm, total width: 3,353 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 8,100 rpm, overall weight: 6,033 kg, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 1.321 x 457 mm Table load 1.588 kg Lhsdpfox E S Iqex Aa Esr Number of pallets: 1 x Movement X-axis 1.270 mm Movement Y-axis 508 mm Movement Z-axis 635 mm Spindle taper MAS BT40 Spindle speed 40 - 8.100 1/min Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2005, Main Drive Spindle Speed 4000 RPM Number of axis 3 Movement X-Axis Movement 762 mm Lodpjx E Eagefx Aa Eehr Z-Axis Movement 406 mm Y-Axis Movement 305 mm This 3-axis HAAS TM1 was manufactured in 2005. It features a vertical machining center with a spindle speed of 4000 rpm and travel dimensions of X 762 mm, Y 305 mm, and Z 406 mm. If you are looking to get high-quality milling capabilities, consider the HAAS TM1 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 3720 kg Control Unit Brand HAAS Main Drive Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 406 mm Z-Axis Movement 508 mm This 3-axis HAAS VF-2SS vertical machining center was manufactured in 2011. It features a 12,000 rpm spindle speed and a table size of 356 mm by 914 mm. With X, Y, and Z travels of 762 mm, 406 mm, and 508 mm respectively, it handles a variety of machining tasks. Consider the opportunity to buy this HAAS VF-2SS vertical machining center. Contact us for more information. Application Types Milling Ljdpex E Edljfx Aa Eshr

Condition: good (used), Year of construction: 2017, Machine has 1,350 spindle hours and 7,000 power-on hours, Haas VF 3 with 4 axes, Year of manufacture: 2017, Control: Haas, Travel X/Y/Z: 1016/508/635 mm, 24-position tool changer, Taper: SK 40, Table size: 1219 x 457 mm, Spindle speed up to 8,100 rpm, Lhedsx Ezk Uopfx Aa Eer 4th axis HRT 310 with tailstock, Max. table load: 1,588 kg, 3D measuring probe, Renishaw probe,