Behälter K.G. Bremen GmbH

Condition: used, Used Winkworth approximately 30 litre capacity (product dependant) stainless steel z-blade mixer. Weight: Estimated: Kg1000.0 Kodozfigbjpfx Amrjlu

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Ksdpjzfh U Djfx Amrjlu Capacity: 100 L Material of construction: 316 Stainless Steel Width: 350 mm Horsepower: 1.5 kW Length: 1,000 mm Jacket: No Type Of Ribbon: Single

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel wing blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. Klodpfozfh Uqex Amrsu - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. This unit is ready to run. A video of this mixer is available below.

Condition: used, Used Stainless Steel Millchem Dissolver type FMG25HD. Driven by a 22/15kW, 380V, 1500/750 rpm motor. Stainless Steel Turbine has a diameter of approximately 300mm. Supplied with (1) stainless steel tank with a capacity of approximately 1300 litres measuring 1180mm diameter x 1240mm. Klsdpfszd Urgex Amrsu

Condition: used, Year of construction: 2018, Manufacturer : SPXFLOW Lightnin Model : HP-25 A Year: 2018 Type : Stirrer Diameter of the stirring blade: 110 mm Length of the stirring shaft: 825 mm Shaft diameter: 12.5 mm Required pressure: 6 bar Manual pin-type lifting system Lifting stroke: 36 cm Kljdjzcznyspfx Amrou Maximum width of a container: 72 cm Dimensions: floor to >mixing head (lower position): 55 mm Dimensions: floor to >agitator head (top position): 415 mm Dimension : 110 x 103 x 150 cm Technical documentation available

Condition: used, Manufacturer : SPXFLOW Lightnin Model : Mi5P10 Year : 2015   Type: Pneumatic mixer / stirrer Diameter of the mixing head: 240 mm Length of the stirring shaft: 915 mm Shaft diameter: 25 mm Required pressure: 6 bar Speed variation: mechanical Manual lifting system / counterweight Lifting stroke: 1290 mm Maximum container width: 980 mm Dimensions:> floor to agitator (lower position): 0 mm Kedpfx Ajzbyp Hjmrolu Dimensions: floor to> top of mixing unit (raised position): 1255 mm Dimension : 1110 x 1300 x 3270 mm   Technical documentation available Video showing the machine in operation in our workshops

Condition: used, Used Hosokawa Nauta type conical mixer, approximately 750 litre working capacity. Kledpfx Amozbuhdsrou

Condition: used, Málo používaný sudový rotační homogenizátor / mixér Pharmatech Model BV 400A MultiBlend z nerezové oceli. - Výrobce: Pharmatech (Terriva) UK, Kodpfxjzbug Tj Amrolu - Model: BV 400A - Maximální hmotnost dávky: 200 kg - Pohon míchání: 2,2 kW, 1400 ot./min, 50Hz, Ex II 3 G EEx nA II T3 / II 3 D EEx tDT

Condition: used, Used Stephan Model UM 60 E high intensity/universal vacuum mixer. Kjdszbug Hjpfx Amrelu - Manufacture: Stephan, Germany, now Proxes group. - Model: UM60 E (electrically top driven screper). - Vessel: Stainless steel vessel total volume 60 litre, working 6-40 litre. - Knife/Drive: S-blade type of agitator driven via dual speed el. motor 5.5/7.5 kW, 1500/3000 rpm, 50 Hz, 400 V.

Condition: used, Used stainless steel horizontal ribbon blender by WAM GROUP S.p.A. (Italy) model WNHO2400E/0DK. Total capacity of the mixer is 2400 litres. Working capacity is approximately 1500-1700 litres. Stainless steel mixing chamber has internal dimensions of 1210 mm wide x 2000 mm length and is equipped with an inspection door located on the side wall measuring 1200 mm width x 450 mm height. Mixer has interrupted double counter-pitch ribbon screw which is made of magnetic non corrosive steel (ferritic steel). Agitator is driven by gearbox and belts by electric motor with power 18,5 kW, 1470 rpm, 50 Hz. Working rotation speed of shaft is approximately 29 rpm. Unit has central bottom discharge with dimension: width 175 mm x length 250 mm, equipped with pneumatically operated valve. Top cover of the mixer is made of stainless steel and is equipped with a central connection with a diameter of 390 mm. Specifications: Capacity: 2,400 L Material of construction: Stainless steel and magnetic non corrosive steel (ferritic steel) Width: 1,210 mm Klsdpfxszbucns Amrsu Horsepower: 18.5 kW Length: 2,000 mm Jacket: No Discharge Type: On bottom pneumatically operated valve Type Of Ribbon: Interrupted double counter-pitch ribbon screw Revolutions Per Minute: 29

Condition: new, Brand new PERRYmix model HVP 2000 stainless steel conical mixer for gentle powder mixing: - Maximum working volume of 2000 litres. - 1 pc half-circle top cover bolted to the vessel with round feeding inlet equipped with safety mesh and the lid. - 1 pc half-circle top cover bolted to the vessel - Screw agitator supported by bottom pintle bearing (hardened metal), adjusted for quick removal of the screw. - Inner surface polished Ra ≥ 3.2 / outer surface bead blasted. - Manually operated rotary slide outlet valve with conical discharge. - Mounted on 3 lugs. - Standard non-ATEX atmospheres Drive: - Screw agitator driven by 5.5 kW electric motor via NORD gearbox. - Swing arm driven by 1.5 kW electric motor via NORD gearbox. Material design: - Product contact parts manufactured of AISI 304 / DIN 1.4301 stainless steel (beam, conical vessel, mixing screw, vessel lid, product outlet and hopper). Kedpezbub Refx Amrslu - Cast carbon steel arm - painted with FDA paint. Options: - Cast stainless steel arm. - Product contact parts made of AISI 316 stainless steel - Custom designed top lid (hinged covers, various filling connections etc.). - Drives and gearboxes for potentially explosive atmospheres. - Pneumatically controlled discharge valve. - Stainless steel legs. (Disclaimer: Attached photos shows improved design of HVP 1000 with stainless steel arm and tilting half-circle top cover)

Condition: new, Brand new PERRYmix model HVP 600 stainless steel conical mixer for gentle powder mixing: - Maximum working volume of 600 litres. - 1 pc half-circle top cover bolted to the vessel with round feeding inlet equipped with safety mesh and the lid. - 1 pc half-circle top cover bolted to the vessel - Screw agitator supported by bottom pintle bearing (hardened metal), adjusted for quick removal of the screw. - Inner surface polished Ra ≥ 3.2 / outer surface bead blasted. - Manually operated rotary slide outlet valve with conical discharge. - Mounted on 3 lugs. - Standard non-ATEX atmospheres Drive: - Screw agitator driven by 2.2 kW electric motor via NORD gearbox. - Swing arm driven by 0.37 kW electric motor via NORD gearbox. Material design: - Product contact parts manufactured of AISI 304 / DIN 1.4301 stainless steel (beam, conical vessel, mixing screw, vessel lid, product outlet and hopper). - Cast carbon steel arm - painted with FDA paint. Options: - Cast stainless steel arm. Kedpfx Aszbubwemrolu - Product contact parts made of AISI 316 stainless steel - Custom designed top lid (hinged covers, various filling connections etc.). - Drives and gearboxes for potentially explosive atmospheres. - Pneumatically controlled discharge valve. - Stainless steel legs. (Disclaimer: Attached photos shows improved design of HVP 300 with stainless steel arm and tilting half-circle top cover)

Condition: new, Unused Langfields approximately 7,766 litre total capacity Nickel 200 (BS3072N11) vertical mixing vessel. Unit measures approximately 1950mm straight side x 1950mm diameter. Unit has welded dished top and bottom heads. Internal rated 18.35 Bar design pressure at 200 deg.c. Unit has a top entry (2) tier (3) pitched blade Nickel 200 agitator driven by 3 kW variable speed drive at 1420rpm with double mechanical seal and thermistors. Unit is mounted on (4) carbon steel legs. Klodpfx Ajzbt U Nomrou

Condition: used, Year of construction: 2015, Manufacturer : SPXFLOW Lightnin Model : Mi5P10 Year : 2015   Type: Pneumatic mixer / stirrer Diameter of the agitator: 320 mm Length of the stirring shaft: 915 mm Shaft diameter: 25 mm Required pressure: 6 bar Speed variation: mechanical Manual lifting system / counterweight Kedpfxozak Iks Amrslu Lifting stroke: 1680 mm Maximum width of a container: 950 mm Floor>-to-agitator height (lower position): 65 mm Floor-to->top height of the agitator (top position): 1740 mm Dimensions: 111 x 130 x 327 cm   Technical documentation available Video showing the machine in operation in our workshops

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Equipment: type plate available, Ystral C 22.000 S Conti-TDS-3 inline disperser, designed for ATEX category Ex II 2D/-c T135°C X (indoor/outdoor), stainless steel control panel, 22 kW, nominal speed 3000 rpm, adjustable speed 600 - 3600 rpm, fitted with a freewheel clutch to interrupt the drive in the event of overload (prevents damage to the machine if foreign objects enter), liquid inlet and outlet DN 65 milk coupling (DIN 11851) and fitted with butterfly valve and Camlock connection, drainage outlet DN 25 milk coupling (DIN 11851) and fitted with butterfly valve and Camlock connection, 2 powder inlets; powder inlet 1 DN 40 milk coupling (DIN 11851) fitted with a butterfly valve and Camlock connection, powder inlet 2 DN 32 clamp connection fitted with a butterfly valve and Camlock connection, powder inlet 2 in a special version for the installation of replaceable Teflon inserts for the processing of highly sticky powders, product contact parts made of AISI 316L stainless steel (1.4404), double mechanical seal with WE100 flow monitoring system, cooling and lubrication of the mechanical seals using clean, filtered tap water, assembled on a mobile stainless steel machine frame, stainless steel cover over the motor, used for the dust-free feeding, wetting and direct dispersion of powders (pigments) in liquids Kjdpfx Ajy Uvllomrolu

Condition: used, STAINLESS STEEL MIXER TANK, STAINLESS STEEL MIXER, ACID-RESISTANT, CHEMICAL INDUSTRY -Design: Flat-bottomed, cylindrical shell, openable lid mixer tank. Heating jacket on the bottom and shell, with the lid opened by a pneumatic cylinder. -Material quality: stainless steel -Overall dimensions: 1500x960x1750mm -Internal tank size: diameter 800x800mm Kledpfxsy Udcxe Amrsu -Electrical data: 380V; 1.1kW; 2.5A -Mixer speed: ~100 rpm

Condition: used, Mało używane mieszadło ujednolicające wykonane ze stali kwasoodpornej produkcji Silverson (Anglia) model GX10/1500. Mieszadło posiada głowicę do ogólnych zastosowań. Napęd bezpośrednio silnikiem elektrycznym o mocy 7,5 kW, 1470 obr/min. W zestawie znajduje się przejezdna podstawa z hydraulicznym unoszeniem/opuszczaniem typ D/Lift produkcji Silverson. Ksdpjy Inr Rofx Amrelu

Condition: used, Używany mieszalnik lemieszowy Morton-Lodige ze stali kwasoodpornej. Wymiary komory wskazują, że to model FKM1200D. Pojemność komory mieszania 1200 l. Wymiary: długość 1750 mm x średnica 1000 mm. Mieszalnik posiada pojedyńczy wał z mieszadłami lemieszowymi i dwoma mieszadłami pół-lemieszowymi. Wykonanie ze stali ko. Napęd przez silnik elektryczny z reduktorem. Dolne otwory wysypowe, wyposażone w klapy sterowane pneumatycznie. Mieszalnik posiada miejsce na zamontowanie dwóch mieszadeł intensywnych (chopperów). Maszyna zamontowana na ramie ze stali węglowej. Specifications: Bowl Volume: 1,200 L Material Of Construction: Stainless Steel Choppers (Y/N): N Vacuum Internal (Y/N): N Jacket (Y/N): N Kjdoy Inr Depfx Amrolu

Condition: used, Year of construction: 1983, Manufacturer : Moritz Year : 1983 Type : Vacuum mixer Emulsifying motor: 3000 rpm – 3 kW Volume : 50L Vertical stainless steel tank: Diameter 400 mm / Depth: 450 mm Jacketed Total draining 2 variable-speed agitators on the lid - 2 three-bladed propellers: 0 to 200 rpm Kjdpfx Amjy E T Swjrslu - Anchor with scrapers: 0 to 100 rpm Two-speed bottom-mounted turbo emulsifier with recirculation Built-in vacuum pump Electrical cabinet A hot water unit is available on request; this request may be subject to a separate quotation.

Condition: used, Used Netzsch model PMD VC2500 stainless steel variable capacity pre-mix disperser. Approximately 600-2500 litre working capacity. Unit has welded base and bolted dished top head. Has top entry stainless steel 3-tier 4-blade pitched paddle agitator direct driven by 7.5kW, 415 Volt, 3/50, 1435rpm motor via Renold model PM60 gearbox rated 48.2/1 reduction ratio. Unit has bottom entry stainless steel scraped surface agitator belt driven by 7.5kW, 3/50, 1,440rpm motor via Renold model SMH8 gearbox rated 25/1 reduction ratio. Has external heating/cooling jacket. Unit has bottom discharge. Kjdpsy Ddv Djfx Amrolu

Condition: used, Year of construction: 1989, Manufacturer : Rayneri / VMI Model : Ultramix ME 120 RB Type: Stirrer - Mixer on stand Year: 1989 Agitation : rotor stator Motor power: 1.5 kW – 1,500 rpm Speed variation: mechanical Adjustment of the height of the mixing head from the floor: 0–85 cm Length of stirring shaft: 90 cm Up and down: manual with counterweight Leg clearance: max. 70 cm Ksdpfx Amjyzt Uqjrelu Machine dimensions: W 100 x D 130 x H 230 cm

Condition: used, Used Fryma stand agitator with tempering unit Item number: 10897 Type: stationary Overall height: 1930 mm Overall width: 1320 mm Overall length: 1650 mm Leg height: 100 mm Motor: Power: 11-15 kW Kodpfsyzp Hvsx Amrslu Speed: 2910 - 3490 rpm Voltage: 50 - 60 Hz Agitator: Dissolver Diameter: 100 mm Shaft length: 260 mm Tank: Volume: 46 L Material (media-contact): 1.4301 stainless steel Inner diameter: 400 mm Outer diameter: 450 mm Cylindrical height: 365 mm Outlet diameter: 22 mm Distance outlet to floor: 450 mm Tempering unit Make: Tool-Temp Overall height: 920 mm Overall length: 720 mm Overall width: 300 mm

Condition: good (used), Year of construction: 1972, functionality: fully functional, This processing plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository compounds, etc., with a usable volume of 100 liters. The total volume with the container closed is 123 liters; the minimum fill volume is 35 liters. The system consists of a fully enclosed stainless steel container with double jacket, which can be electrically or water heated/cooled. The container features a lid with integrated mixing units and drives. The mixing vessel is mounted on three castors and can be wheeled out for filling or cleaning purposes. The lid is mounted on a lifting column for hydraulic raising and lowering, enabling convenient cleaning and emptying. It is fitted with an observation window and two inlets with valves, which can also be used for adding other product components. Additionally, an adjustable mechanism is provided for setting the grinding gap of the colloid mill. Technical specifications: Container: Permissible operating pressure: 1 bar / -1 bar Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Spiral agitator: 29/58 rpm Ksdpfx Aoyx Sxcomrjlu

Condition: used, Used Becomix model Beco Mini RW 2.5 lab scale homogenising mixer.  Manufacturer: Becomix. Capacity: Working capacity 0.5-3.5L. Dimensions: 800mm x 800mm x 900mm high. Klsdpfxoyx Ibgs Amrsu Also includes: -Integrated CIP system. -Agitator with scrapers. -Intuitive touch panel PLC control.  -Compact device with tempering unit. -Vacuum pump. - PLC control integrated into a mobile table. -Mixing vessel full vacuum to 1 bar, double jacket 4 bar.

Condition: used, Used Morton-Lödige FKM1200D ploughshare mixer approximately 1200 litres capacity. Unit measures approximately 1750mm long x 1000mm diameter. Unit has (6) stainless steel ploughshare blades and (2) stainless steel half ploughshare blades driven by an 18.5kW , 1450rpm geared motor through a Renold Ltd gearbox with 49/4 : 1 ratio giving approximately 118rpm output on the shaft. Unit has a pneumatically operated bottom entry discharge valve. Unit is mounted on a mild steel frame. Kljdpfxeyw S R Ns Amrou Dimensions: 1750mm x 1000mm