Hartza Equipos, S.l.u.

Condition: used, Year of construction: 1992, travel distance X-axis: 1,800 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 800 mm, controller manufacturer: UniPro NC 80 C, total height: 3,450 mm, total length: 6,100 mm, total width: 3,600 mm, table width: 710 mm, table length: 2,100 mm, table load: 800 kg, rotational speed (min.): 45 rpm, rotational speed (max.): 2,000 rpm, overall weight: 1,000 kg, spindle motor power: 26,000 W, spindle nose: SK 50, number of slots in tool magazine: 24, CNC Milling Machine, Tilting Head horizontal/vertical, Control UniPro NC 80 C, Travel X/Y/Z 1800/710/800 mm, Spindle speed 45-2000 rpm, Motor 26 KW, tool system ISO 50, Table size 710x2100 mm, table load max. 800 kg, tool changer 24 Pos., dimension 610x360x345 cm, weight ca. 10'000 kg; with chip conveyor, band filter unit, tool holders, YOP 1992 Iedpfx Aeyaq D Ejg Ueht

Condition: used, Year of construction: 2014, x-travel 2000 mm y-travel 630 mm z-travel 550 mm Control Siemens 840 D total power requirement 7,5 - 22,5 kW weight of the machine ca. 10,5 t Maximum table load:1,000 kg / m table length Movement range: X-axis:2000 mm Y-axis:630 mm Z-axis:550 mm Speed range up to:12,000 min-1 Maximum speed range:140 Nm Iodpeyan Rcofx Ag Usht Drilling power:average 42 mm (with insert drill) Milling power:600 cm³/min Tool places:24 Tool shaft:HSK A 63 DIN 69893 Tool average:max. 75 mm Tool average with: free neighbouring places:max. 160 mm Tool length:max. 320 mm Tool weight:max. 8 kg (max. magazine load 100 kg Tool change time:approx. 1.5 s (depending on control

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, tool weight: 30,000 g, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. Additional equipment • Belt-type oil skimmer • Triple light tower • Shower coolant • Through-spindle coolant 70 bar – 75 kW with cyclone filtration • Automatic shutdown • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Machine Benefits Technical Machine Benefits • Equipped with fanuc 31i cnc control • B-axis: indexable by degree • Pallet size: 800 x 800 mm • Pallet centering device • Tool magazine: 60 tools type bt 50 • Max. Torque: 1732 n·m Extra Information Machine still under power Dimensions Ihsdpfx Aeyair Ueg Uet Machine Depth 8150 mm

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, total height: 500 mm, overall weight: 7,500 kg, product length (max.): 1,200 mm, This 3-axis ZEUS FMO 140B was manufactured in 2000. It features a dual-spindle system with both horizontal and vertical capabilities, and a maximum speed of 4000 rpm. The machine includes a Selca 4045 CNC, a recently replaced handwheel, and a network board. Axis travels are 1200 × 650 × 500 mm. Consider the opportunity to buy this ZEUS FMO 140B horizontal machining centre. Contact us for more information about this machine. • Dual-spindle system (horizontal and vertical) with gear range change • Maximum spindle speed: 4000 rpm Dimensions Machine Depth 650 mm Ihedsx Uz E Djpfx Ag Ujt

Condition: used, Year of construction: 2001, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,800 mm, controller manufacturer: Fanuc, controller model: 160i-M, table width: 1,000 mm, table length: 1,000 mm, table load: 2,000 kg, overall weight: 75,000 kg, CNC Precision Horizontal 5-axis Machining Centre CNC Control: Fanuc 160i-MA Table size 1000 x 1000 mm Table load 2000 kg Number of pallets 5 Max. workpiece diameter x height 1400x1200 mm Ihedpfx Ajx Ttx Tog Ujt Movement X-Y-Z-Axis: 1800 mm A-Axis (table tilt) +20 / -110 B-Axis travel 360° Spindle taper DIN 69871/50A Spindle speed 10.000 R/Min Tool store capacity 240 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2022, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 203 mm, travel distance Z-axis: 1,219 mm, overall weight: 2,087 kg, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, We are offering this used HAAS TL-2 horizontal machining center, year of manufacture 2022. Serial number: 3124664 Manufacture date: 06/2022 Ihodex Tgx Hepfx Ag Uot Voltage: 400 V Phases: 3 Frequency: 50/60 Hz Rated current: 13 A Maximum current: 10 A If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2010, operating hours: 74,323 h, functionality: fully functional, CNC Machining Center HECKERT HEC 1250 Athletic Ram For sale is a used CNC machining center HECKERT HEC 1250 Athletic Ram with ram support. The machine is in operational condition and suitable for heavy-duty machining tasks in industrial applications. Machine Data Machinery Type: CNC machining center with ram support Model: HEC 1250 Athletic Ram Machine Category: Milling machine / machining Year of Manufacture: 2009 Condition: Functioning Operating Hours: 50,100 h Control System: CNC control, Siemens Solutionline 840D Number of Axes: 5 Software: Siemens Sinumerik Mechanics / Spindle Toolholder: DIN 69871 SK50 Spindle Type: SK50 Maximum Tool Weight: 35 kg Maximum Tool Length: 450 mm Maximum Tool Diameter: 250 mm Tool Magazine: 280 positions Isdox Syhrepfx Ag Usht Probe: Renishaw MP10 Travel Paths X Travel: 2,200 mm Y Travel: 1,500 mm Z Travel: 1,850 mm Pallet System Pallet Pool: 2 pallets Additional Pallets: 4 pallets with threaded holes and T-slots Pallet Size: 1,000 × 1,250 mm Equipment Oil Tray: Available Platform: Available Coolant System: Available Chip Extractor: Available Operating Manual / Documentation: Available Crane: Available Maintenance / History Maintenance: 2012, 2014, 2016, 2017, 2018, 2019 Inspections: 2021, 2022, 2023 Last Major Overhaul: ZP-KGT replacement in 2025 Power Supply Mains Connection: TN-C, 3/PEN AC 400 V Rated Voltage: 3AC 400 V Rated Operating Voltage: AC 360 V – AC 440 V Operating Frequency: 49 – 51 Hz Insulation Voltage: AC 500 V Rated Current: 250 A Supply Fuse: NH fuse size 1, 250 A gL, 500 V Connected Load: 130 kW Type of Current: D Compressed Air Connection: 6 bar Transport / Dismantling Machine must be dismantled: Yes Tools for Dismantling / Removal: Not included

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, number of slots in tool magazine: 180, Work piece up to 1530 x 1295 x 3500 Kg Tool size up to 650 mm length and 30 Kg Tool size up to 400 x 250 mm and 30 Kg Extende feed rate up to 15 kN-100% ED Coolant Filtration     BLUM Laser NT 3D Quick ser MPC protection 3D Measuring probe DXF Import   Tool package 180 Tool HSK-100A 2 x Cast iron angle plates 1500 mm   15000 Working hours 1e owner machine  X - Travel: 1600mm Y - Travel: 1100mm Z - Travel: 1400mm B-Axis indexing: 360000° Table Length: 1250mm Table Width: 1000mm Table load: 3000 Number of pallets: 2 Feed rate X-Axis: 60000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Spindle Taper: HSK-100ISO/Bt/Mk Power on spindle: 52kW Speeds / ranges: 12000Rpm ATC / revolver: 180 Iodsx Sqptspfx Ag Ujht Number of controlled axis:4 Length: 9170mm Width: 6320mm Height: 3969mm Weight: 39500kg

Condition: good (used), Year of construction: 2010, Machine is in good condition. Parts shown by hand not come. Iedpfex N Atfex Ag Ujht

Condition: used, Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens 810 D, total length: 6,500 mm, total width: 3,500 mm, overall weight: 9,000 kg, spindle speed (max.): 9,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis vertical machining center from Unisign, model Univers 4, year of manufacture 2004. The machine is used but in good condition, fully functional, and has been regularly maintained. Special feature: second milling spindle (replacement spindle included). Operating hours: 19,357 Technical Data Ihjdpfox Iputsx Ag Uet -Traverse paths: X = 1600 mm / Y = 400 mm / Z = 400 mm -B axis: A axis (360° x 0.001°) 20 rpm -Spindle speed: 0 – 9000 rpm -Control: Siemens Sinumerik 810D -Table size: 1 bridge with 4 sides, L 1800 mm, 4 x 113 mm -Table load capacity: approx. 150 kg -Working feed rate: 5 – 28,000 mm/min -Rapid traverse (X/Y/Z): 28,000 mm/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 44 stations -Tool diameter: approx. 70 mm (up to 200 mm with free adjacent slots) -Max. tool length: approx. 240 mm -Max. tool weight: 5 kg -Max. total weight of tool magazine: approx. 200 kg -Tool change time: approx. 8 sec Machine Requirements & Dimensions -Total power requirement: 14 kW -Machine weight: approx. 9000 kg -Footprint (LxW): approx. 6.5 x 3.5 m Equipment & Accessories -Coolant system (approx. 480 L, internal & external emulsion) -Clefil RBF-E100 20 bar pump unit -Chip conveyor -Rinse gun in machining area -Hydraulic/pneumatic clamping options in machining area -Enclosed work area cover in accordance with safety regulations (UVV) -Röhmheld hydraulic aggregate (max. 500 bar) -Automatic probe RWP20.00 -Various SK40 holders -Technical documentation & floor plan available Maintenance -Regular maintenance performed -Hydraulic and pneumatic hoses partially renewed -LT module replaced in control cabinet The machine is immediately available and ready for operation. If interested or if you have any questions, please get in touch! All information provided to the best of our knowledge and belief. Subject to change, error, and prior sale.

Condition: excellent (used), Year of construction: 2018, operating hours: 12,805 h, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Siemens, controller model: 840D SL, workpiece length (max.): 2,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 600 mm, total height: 3,700 mm, total length: 6,700 mm, total width: 3,000 mm, table width: 1,500 mm, table length: 2,000 mm, table load: 500 kg, overall weight: 8,000 kg, spindle speed (max.): 24,000 rpm, operating hours of spindle: 4,314 h, spindle motor power: 16 W, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a high-precision 5/6-axis CNC machining center, MAKA MK 7s, from MAKA Systems GmbH, equipped with Siemens SINUMERIK 840D SL control and OP15 PCU operating unit. The machine comes directly from production, is powered up, and can be inspected or demonstrated in operation at any time. It is in very well-maintained technical condition and has been serviced regularly. TECHNICAL HIGHLIGHTS: - 5-axis milling technology with retrofitted 6th axis (B-axis / Lehmann rotoFIX EA-530) - Spindle completely overhauled (2025, €18,000 investment) - Tool magazine with 20 positions (rotary table) - Tool holder: HSK A63, max. speed 24,000 rpm, output 16 kW - Rapid traverse: X/Y = 60 m/min, Z = 45 m/min - Positioning accuracy per axis: ± 0.1 mm/m, repeat accuracy: ± 0.05 mm/m Iodpsx Hv I Defx Ag Usht - 3D wireless measuring probe, tool breakage detection, spray cooling unit - Rectangular frame table with zero-point clamping system and chip management (brushes, guide plates, conveyor belt) - Pneumatic/hydraulic workpiece clamping incl. hydraulic unit - Hydraulic system up to 210 bar (3 clamping circuits) - CAD data, technical documentation, and layout plan available WORKING RANGE & DIMENSIONS: - Travel (X/Y/Z): 2,900 / 1,900 / 1,000 mm - A-axis: 196° C-axis: 540° - B-axis (Lehmann rotary table): retrofitted, integrated with the control system - Working area: 2,000 × 1,000 × 600 mm - Machine weight: approx. 8 t - Dimensions (L × W × H): approx. 6.7 × 3.0 × 3.7 m FURTHER EQUIPMENT: - Saw blade pick-up station (Ø 450 mm) - Reinforced front doors, sheet metal safety enclosure with noise-reducing roof - Automatic safety sliding doors - Blowing nozzle in tool magazine (spindle cleaning) - Electrical connection: 400 V / 50 Hz – 19 kW – 43 A - Pneumatic connection: 6 bar / ½″ – air consumption approx. 800 l/h OPERATING HOURS / RUN TIMES: - Main power-on hours approx. 12,805 h (as of Oct 2025) The meter runs whenever the machine is powered—during setup, maintenance, or idle time as well. - Spindle run time: 4,314 h total The current spindle was fully renewed and overhauled in 2025 SPECIAL FEATURES: - Powered up – demonstration available at any time - Direct from production – not a dealer sale - Complete technical documentation available - Support with dismantling, loading, and transport available (for a fee) Price: €174,900 net – optionally incl. 6th axis (Lehmann) €199,000 Price is net, negotiable with quick turnaround. All details have been provided to the best of our knowledge and belief. Subject to change, error, and prior sale.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Iedpex Hn A Tjfx Ag Uoht Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation

Condition: used, Year of construction: 2012, operating hours: 44,900 h, functionality: fully functional, machine/vehicle number: 16504, Equipment: chip conveyor, Pallet changer: -> included Spindle: -> HSK63 tool holder -> Speed 20,000 rpm Linear axes: -> X-axis 750 mm -> Y-axis 750 mm Ijdpfx Asx Him Hog Usht -> Z-axis 725 mm Tool changer: -> 60 stations This machine used a single cooling unit together with another machine (lot 2770012). The cooling unit (lot 2770249) is offered separately. This machine does NOT include a cooling unit. The machine/plant does not include any product-related tools, fixtures, or grippers (robots). Spindle hours approx. 25,600 Operating hours approx. 44,900

Condition: used, Year of construction: 2011, operating hours: 50,500 h, functionality: fully functional, machine/vehicle number: 16520, Equipment: chip conveyor, Pallet changer: -> included Spindle: -> HSK63 tool holder Iedpfx Agex Himte Ueht -> Speed 20,000 rpm Linear axes: -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool changer: -> 60 stations This unit shared a single cooling unit with another device (lot 2770012). This unit does NOT include a cooling unit. The machine/system does not include product-specific tools/fixtures or grippers (robot).

Condition: used, Year of construction: 2013, operating hours: 45,500 h, functionality: fully functional, machine/vehicle number: 16546, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Pallet Changer: -> Included Spindle: -> Tool holder: HSK63 -> Speed: 20,000 rpm Linear Axes: -> X-axis: 750 mm -> Y-axis: 750 mm -> Z-axis: 725 mm Tool Changer: Iedsx Hilvjpfx Ag Usht -> 60 positions This machine is equipped with a coolant filtration system with chiller. • Manufacturer: KNOLL Maschinenbau GmbH / HYFRA Industriekühlanlagen GmbH • Model: PF 210 (Knoll) + TRK30-EF-S (Hyfra Pedia) • Year of manufacture: 2012 • Serial numbers:  - KNOLL: 501973 / 201139433  - HYFRA: 12030089 • Electrical connection: 3×400 V / 50 Hz • Control voltage: 24 V DC • Power consumption: 11.1 kW (Knoll) + 4.8 kW (Hyfra) • Fuse protection: 16 / 25 A (Knoll), 16 A (Hyfra) • Cooling capacity (chiller): 3.8 kW at 42 °C • Refrigerant: R134a, 1.6 kg • Max. pressure: 20 bar • Weight (with coolant): 140 kg Note: Machine/asset does not include any product-related tools, fixtures, or robot grippers. Spindle hours: approx. 9,300 Operating hours: approx. 45,500

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: SN 15642, Hüller Hille nbh110 SN 15642 Year of manufacture: 1999 Spindle: SK40, 12,000 rpm X-axis: 630 mm Y-axis: 630 mm Z-axis: 600 mm Ihjdpfx Aex Ey Ifeg Uet Max. feed rate: 7,500 mm/min Tools: 36 pcs Tool diameter: 150/340 mm (with free adjacent positions), Tool length: 270 mm Number of pallets: 4 Pallet size: 400x500 mm Max. pallet load: 600 kg Axis B NC NC control: Sinumerik 840D Power: 69 kVA

Condition: used, Year of construction: 1986, Machine: Hueller Hille NBH 70 Serial number: 6161034.1 Year of manufacture: 1985 Control: Sinumerik 810 Spindle speed: 25-6000 rpm Tool holder: SK40 Travel: X: 630 Y: 500 Z: 550 Optical measuring system in axes X, Y, Z Ijdpfjx Ey Acex Ag Ueht B axis rotatable in 1° increments 2 pallet tables, surface: 400x400 mm Pallet changer system Tool magazines: 2x with 24 tools each Max tool diameter: 110 mm Max tool length: 320 mm Max tool weight: 15 kg.

Condition: used, Year of construction: 1986, Machine: Hueller Hille NBH 70 Serial number: 6171067 Year of manufacture: 1986 Control: Sinumerik System 8 Spindle speed: 25-4000 rpm Tool holder: SK40 Ihodpfx Aex Eyzfeg Ust Travel X: 630 mm, Y: 500 mm, Z: 550 mm Optical measuring system in X, Y, Z axes B axis NC mode 2 pallets, table area: 400x400 mm Pallet changer system Tool magazine: 2x with 24 tools each Max tool diameter: 110 mm Max tool length: 320 mm Max tool weight: 15 kg Power supply: 380V 50Hz 36kVA.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,716 h, Control Unit Brand SIEMENS Model 840 D Main Drive Spindle motor power 37 kW Number of axis 4 Movement X-Axis Movement 1200 mm Y-Axis Movement 1000 mm Z-Axis Movement 1200 mm Ihsdpex D Rn Rsfx Ag Ust Tools Number of index 320 Type of tool holder SK50 Additional Equipment Magazine Capacity: 32 Euro pallet spaces for raw material Pallet Size: 630x800 mm Pallet Spaces: 32 This 4-axis HULLER HILLE NBH 230 horizontal machining center was manufactured in 2009. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this HULLER HILLE NBH 230 horizontal machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand HAAS Main Drive Tool taper SK 50 Number of axis 4 Isdpfx Agsx D Epps Usht Movement X-Axis Movement 1626 mm X-Axis Rapid Traverse 15.2 m/min each Y-Axis Movement 1270 mm Y-Axis Rapid Traverse 15.2 m/min each Z-Axis Movement 814 mm Z-Axis Rapid Traverse 15.2 m/min each Workpiece Workpiece weight 4536 kg Media Chip conveyor Yes Additional Equipment Coolant tank with low and high pressure pumps 2 chip conveyors with screw This 4-axis HAAS EC-1600 was manufactured in 2008. It features a large table (1626 mm x 814 mm) with an integrated 4th axis rotary table, a milling spindle SK 50, and a 30+1 tool changer. The machine can handle workpieces up to 4,536 kg and includes dual chip conveyors. If you are looking to get high-quality milling capabilities, consider the HAAS EC-1600 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand SIEMENS Ihjdpfxox D Nr Ij Ag Uot Model Sinumerik 840C Main Drive Spindle speed range 6000 Tool taper SK50 Movement X-Axis Movement 1200 mm Y-Axis Movement 800 mm Z-Axis Movement 800 mm Tools Max tool length 750 mm This Burkhardt-Weber MC 80 was manufactured in 1998. It features a spindle speed of 6,000 rpm, a maximum feed rate of 25 m/min, and a tool capacity of 80 with SK50 adapters. The CNC Siemens Sinumerik 840C control system enhances its precision. Consider the opportunity to buy this Burkhardt-Weber MC 80 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 3500 mm Measurements depth 6000 mm Measurements height 3400 mm Machine weight 7000 kg Main Drive Spindle speed range 24000 rpm Spindle motor power 10 kW Tool taper HSK 63F Number of axis 5 Movement X-Axis Movement 2900 mm Y-Axis Movement 1740 mm Z-Axis Movement 1050 mm Tools Max weight 3 kg Additional Equipment Maka protective enclosure, open at the top and with two manually opening doors at the front Ihjdox D Dlcspfx Ag Ujt This 5-axis MAKA MK 7s was manufactured in 2007. It features a robust 7000 kg frame, operates on 400V/50Hz, and has a rated power of 18.5 kW. The machine includes a BWO 910 RC control system and a versatile HSK 63F milling spindle. Its linear tool magazine holds tools and saw blades, complemented by an aluminum surface table measuring 2000 x 1000 mm. Consider the opportunity to buy this MAKA MK 7s horizontal machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, operating hours: 28,000 h, functionality: fully functional, travel distance X-axis: 1,850 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,525 mm, controller model: Fanuc 16 i- M , rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel path X: 1,850 mm Travel path Y: 1,250 mm Travel path Z: 1,525 mm Iodpox Dcb Njfx Ag Usht Pallet changer type: double (2-station) Pallet size: 1,250 x 1,000 mm Tool changer: 80-station Tool holder: ISO 50 Drive power: 30 kW Spindle speed: 20–6,000 rpm Maximum workpiece weight: 5,000 kg Rotary table: 360 x 1° Feed rates – automatic programming: 0–15,000 mm/min Rapid traverse: 30 m/min MACHINE DETAILS Control unit: Fanuc 16i-M Total power requirement: 60 kW Dimensions & Weight Required installation space: approx. 8.3 x 7.3 x 4 m Machine weight: approx. 27 t Operating Hours Total operating hours: 84,857 h Automatic mode hours: 31,451 h Spindle hours: 28,149 h EQUIPMENT Chip conveyor High-pressure cooling Internal coolant supply Approx. 300 SK 50 tool holders Renishaw measuring probe Filter belt system with internal cooling (IKZ) Extraction system

Condition: used, Year of construction: 2014, Make: HANDTMANN, Model: HBZ Trunnion 80, Year of manufacture: 2014, Serial No. 200793, Control unit by Heidenhain, Type TNC640, Travel distances X/Y/Z: 850 x 850 x 700 mm, A-axis max. -30/+120°, C-axis 360°, Tool holder: HSK 63A, Max. workpiece size: Ø 850 x 630 mm, Max. workpiece weight: 1,200 kg, 40-position tool changer, NC rotary/swivel table, Table diameter: 800 mm, Maximum spindle speed: 30,000 rpm, Chip conveyor by Knoll, Model 600K-3, Band filter system by Knoll, Electrical cabinet by Knoll, Control defective, Travel paths: 850 x 850 x 700 mm Iodpfx Aox A U Ulsg Usht This machine is part of an online auction. Images will be provided later.

Condition: used, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, controller model: Fanuc 6M, spindle motor power: 15 W, Technical Specifications Manufacturer: OKK Model: MCH-800 Year: 1989 Ihedpfxexyzzys Ag Ust Axis Travels (X/Y/Z) X-axis: 2006 mm Y-axis: 1000 mm Z-axis: 800 mm Table & Rotary Index Table Table size: 2202 × 800 mm Rotary indexing table: 800 × 800 mm Table load capacity: - Indexing load: 1,500 kg - Flat load: 3,000 kg Spindle Speed range: 30 – 3,000 rpm Taper: BT50 Main motor power: 15 / 11 kW (20 / 15 HP equivalent) Equipment - 50-station Automatic Tool Changer (ATC) - FANUC 6M CNC control - Extremely rigid Japanese construction - Large travels and robust rotary table Weight Total machine weight: 16,500 kg Column: 8,500 kg Table section: 8,000 kg Description This OKK MCH-800 is a classic Japanese horizontal machining center from the era when OKK machines were engineered for maximum rigidity and long-term mechanical reliability. Featuring a BT50 spindle, generous travel dimensions, and an 800 mm rotary table, it is particularly suitable for machining steel components, heavy-duty roughing, and demanding production cycles. The Fanuc 11M control is reliable, easy to maintain, and still fully supported with spare parts.