Esko Sławomir Kosek

Condition: good (used), Year of construction: 1994, functionality: fully functional, 1 used Weinig four-sided planer UNIMAT 23, 5-head with stacking unit for board lengths up to 5.50 m Planing width: 230 mm Planing height: 150 mm Spindle diameter: 50 mm Spindle arrangement: bottom, right, left, top, bottom (with jointer) Total connected load: 37 kW Outfeed roller conveyor: 6000 mm long, 800 mm wide with transfer to left and right Left: transfer to stacking machine Knjdpfx Aaox Ngiqo Ejf Right: board turner Stacking unit Lux for board lengths up to 5.50 m, width up to 1.30 m

Condition: excellent (used), Year of construction: 1996, working width: 230 mm, planing height: 120 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 120 mm, power of feed motor: 4,000 W, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 with 5 spindles. Working width: 230 mm, Working height: 120 mm, Spindle diameter: 40 mm, Feed: 4 kW / 6 – 36 m/min, Spindle configuration: 1-Bottom Knodox Ndb Rspfx Aa Esf 2-Right 3-Left 4-Top 5-Bottom Short-piece package Three powered rollers in the table. Note that the digital control system is defective – the machine operates only via manual adjustment. This means measurements are not displayed accurately and test pieces may be necessary. However, the defect is repairable.

Condition: excellent (used), SCM SI12B Circular Saw Cutting width on the right: 700 mm Maximum cutting height: 100 mm with 300 mm blade Kjdox I E Nmopfx Aa Esnf Manual adjustment of saw blade tilt angle up to 45° Manual lifting and lowering of the saw blade Main motor power: 2.2 kW

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 870-5805, working width: 170 mm, planing height: 120 mm, planing width: 170 mm, spindle speed (max.): 6,000 rpm, workpiece height (max.): 120 mm, workpiece width (max.): 170 mm, number of spindles: 7, feed roller diameter: 140 mm, Width of the work piece to be processed 20-170 mm Thickness of the work piece to be processed 10-120 mm Knsdpex It A Uefx Aa Eof Length of the work piece to be processed L min 750 mm Permissible cutting depth: lower horizontal working unit 0-10 mm, right vertical working unit 0-10 mm Feed speed 6-36 m/min Diameter of feed rollers 140 mm, width 50, 30, 20, 15 mm Tool rotation speed 6000 rpm Number of working units: horizontal 3+1 pieces, vertical 3 pieces

Condition: used, Four-sided planer PANHANS 180/4, in good condition Price changes reserved; errors, printing, and typographical mistakes excepted. Ksdpfsx H Ug Esx Aa Eonf

Condition: excellent (used), functionality: fully functional, Working width: 230 mm Working height: 160 mm Number of spindles: 5 Spindle configuration: 1. Bottom 15 kW 2. Right 11 kW 3. Left 11 kW Kodpfx Aajx Hzv Tj Esnf 4. Top 15 kW 5. Bottom 7.5 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm 3 feed rollers in the work table Feed speed adjustable via inverter up to 60 m/min Feed driven by cardan shaft Pneumatic pressure rollers Technical documentation Machine dimensions: 300x180x170 cm (H) Weight: 3500 kg

Condition: excellent (used), Infeed conveyor for four-sided planer Sacot TECHNICAL SPECIFICATIONS: Max material length: 1700 mm Max material width: 230 mm Material height: 70 mm 5x material feed chains Distance between outer material drivers: 1080 mm Machine dimensions: 4500 × 2400 × 1800 mm (H) Construction: heavy-duty, industrial, steel Control: electric + pneumatic This feeder is ideally suited for: sawmills, wood processing plants, production lines, and manufacturing of short and medium-length components. EXPANDABILITY OPTIONS (optional): Complete technological line including: Weinig Hydromat 23c four-sided planer, 60m/min SACOT panel saw SACOT stacker Knedpfx Aajx Hx H Ns Eef

Condition: excellent (used), Year of construction: 1995, Very well-preserved planer moulder with timed lifting spindles on the right and top, and glazing bead saw. Spindle arrangement: Bottom: 4 kW Right: timed lifting spindle Left: 7.5 kW (together with right spindle) Top: 5.5 kW timed lifting spindle Bottom: 5.5 kW Knodpfjx Htc Ssx Aa Ejf Glazing bead saw: 3 kW Equipped with Centrofix planer heads and spare planer heads.

Condition: good (used), functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 5,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 9, power: 95 kW (129.16 HP), input frequency: 50 Hz, Equipment: cabin, Four-sided planer Weinig Unimat 23, lamella machine 9 spindles, grooved bed Working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (5.5 kW) 4-Right (5.5 kW) 5-Top (11 kW) Ksdjx Hkp Nepfx Aa Esnf 6-Bottom (5.5 kW) 7-Top (7.5 kW) 8-Bottom (37 kW) 9-Uni (11 kW) 5 driven rollers in the table

Condition: excellent (used), Sacot CA.SCA.PILA 1400 Board Stacker A professional stacker designed for the automatic arrangement of boards into uniform, stable, and repeatable bundles. An ideal solution for sawmills and timber processing plants, significantly increasing efficiency and work comfort. TECHNICAL SPECIFICATIONS Stackable material length: 770–1400 mm Stacking width: 1200 mm Stacking height: 1250 mm Machine dimensions: 4600 × 3700 × 2600 mm (H) Feeding / unloading: roller outfeed table Construction: heavy-duty industrial steel Control: electric + pneumatic The stacker is perfectly suited for: sawmills, timber processing plants, production lines, and the manufacturing of short and medium-length components. EXPANSION OPTIONS (optional): a complete technological line including: Weinig Hydromat 23c 60m/min planer SACOT crosscut saw SACOT stacker See full description Suggest a price Knjdpfex Hd Tbsx Aa Esf Lease available

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, Connected load 480V 42kW 108A, extraction connection 5x120 + 2x150 mm, 1x jointer unit, 2x vertical spindle units, 1x thicknessing unit, 1x universal unit top, 1x universal unit bottom, spindle diameter 40 mm, lubricant pump, pneumatically controlled pressure rollers, connection 6 bar, electric bridge adjustment, central lubrication, stepless feed via frequency inverter, total length 4200 mm, depth 2000 mm, height 1700 mm – as returned by customer Knsdpex E T Dmofx Aa Eof

Condition: excellent (used), functionality: fully functional, working width: 410 mm, planing width: 410 mm, Planer, jointer SCM F410 Specification: • condition - used, after inspection • manufacturer - SCM • model - F410 • working width - 410 mm Kedpfsx E Srvox Aa Esnf • table length - 2610 mm • fence adjustable for angle • motor power - 4.0 kW • spindle speed - 5000 rpm • chip thickness indicator • max cutting depth - 8 mm • noise dampening combs at the shaft • motor brake • four-knife shaft, 120 mm diameter, for traditional knives • star-delta starter • dust extraction outlet - 150 mm dia • weight - approx. 650 kg • CE marked • overall dimensions: 261 x 90 x 110 cm (L x W x H) Additional information: • very good technical condition • the presented photos show the actual condition of the item for sale • possibility to start and test the machine on site.

Condition: excellent (used), SCM Sintex four-sided planer. Kodpfsx E R Hxex Aa Ejnf

Condition: excellent (used), Weinig four-side planer Knjdpfx Aaex E Rzpe Eef

Condition: excellent (used), Weinig Four-Side Planer - Maximum planing width: 23 cm - Maximum planing height: 13 cm - Spindle configuration: 5.5 kW bottom spindle, 7.5 kW right and left spindle, and 7.5 kW top spindle - Vertical spindles with vertical and horizontal adjustment Knodpex E Rxuefx Aa Esf - Electrically height-adjustable feed rollers - Electrically height-adjustable top spindle - Steplessly adjustable feed speed - Weinig head alignment device The machine is in very good condition and runs vibration-free.

Condition: excellent (used), Weinig Four-Sided Planer - Maximum planing width: 23 cm - Maximum planing height: 13 cm - Spindle configuration: bottom 5.5 kW, right and left spindles driven by a 5.5 kW motor, top spindles powered by 5.5 kW - Electrically height-adjustable feed rollers Kedpex E Rtxefx Aa Eenf - Infinitely variable feed speed - 4 steel planing knives, each with 4 blades The machine is in very good condition and runs smoothly without vibrations.

Condition: excellent (used), Leadermac LMC 525 Four-Sided Wet Planer - Maximum planing width: 25 cm - Maximum planing height: 20 cm - Bottom spindle: 5.5 kW - Right spindle: 5.5 kW - Left spindle: 5.5 kW - Top spindle: 7.5 kW - Universal spindle: 7.5 kW Kjdpfx Aaex E Rh Ae Eonf - 3 feed rollers in the table + lubrication pump - Hardened chrome tables - Stepless feed speed adjustment In excellent condition. Original. Nothing repainted.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, number of spindles: 6, Four-side planer and moulder Manufactured by Weinig Type: Hydromat 23C Year of manufacture: 2005 Working width: 230 mm Working height: 120 mm 6 spindles Spindle arrangement: bottom/right/left/top/top/bottom Spindle motors: 7.5 kW each Automatic table lubrication Knsdpfx Aaex E Ak Ae Esf Automatic Memory System control system Spindle diameter: 40 mm Spindles with bearings on both sides The last two heads are equipped with jointers

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Four-side planer/moulder – WEINIG QUATTROMAT 23P Year of manufacture: 1998 CE-compliant machine Working width: 13 to 230 mm Working height: 6 to 120 mm Number of spindles: 4, diameter 40 mm (equipped with cutters) Spindle speed: 6000 rpm Upper spindle motor power: 4 kW (5.5 hp) Lower spindle motor power: 4 kW (5.5 hp) Vertical spindle motor power: 5.5 kW (7.5 hp) Documentation: user manual + wiring diagram + spare parts manual + CE certificate Function tested (video available on request via WhatsApp) Transport dimensions: 4100x1400x1700h mm Weight: 1600 kg Kodpfx Aex El E Nsa Eenf

Condition: good (used), Year of construction: 1998, functionality: not functional, machine/vehicle number: 88208, working width: 230 mm, planing height: 120 mm, spindle diameter: 40 mm, planing width: 220 mm, working height: 120 mm, total width: 220 mm, total height: 120 mm, spindle speed (min.): 6,000 rpm, extraction nozzle diameter: 150 mm, planer shaft diameter: 40 mm, input current: 400 A, table width: 230 mm, blade shaft diameter: 40 mm, Equipment: motor brake, Weinig Unimat 23 EL Planing & Moulding Machine with 9 Spindles, No: 88210 Year 1998 In good condition, with safety enclosure and Accoustic Sound & Safety Booth. Good HP, B11, R11, L11, R11, L11, T11, B22(Rip Saw Head) T11, B11 all kw. 2m. Infeed Table. Pneumatic Pressure to Feed Rollers. Wax Pump. Feed Speed from 6-36m/min. Knsdpfox Elagsx Aa Esf Some Planing Heads are on the machine. With full documentation. Can be viewed at The Old Basket Works, Lyng Road, Burrowbridge, Somerset TA7 0SG Photos available on WhatsApp.

Condition: used, Planer and edge finishing machine Weinig Profimat 23 E for four-sided planing and profiling of wood with movable spindle. spindle: 5 spindle 1: Bottom / 5.5 kW / 40 mm spindle 2: Right / 5.5 kW / 40 mm Kodpfxex Ecguj Aa Eonf spindle 3: Left / shared motor with #2 / 40 mm spindle 4: Top / 7.5kW / 40 mm spindle 5: Bottom / 4 kW / 40 mm working width: 230 mm working height: 120 mm

Condition: good (used), functionality: fully functional, working width: 260 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 260 mm, working height: 160 mm, power of feed motor: 4,000 W, spindle speed (max.): 7,000 rpm, spindle speed (min.): 7,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 5, power: 39 kW (53.03 HP), Equipment: cabin, motor brake, Weinig Unimat 1000 with grooved table Working width: 260 mm Working height: 160 mm 5 spindles Spindle diameter: 50 mm Spindle arrangement: 1-Bottom (7.5 kW) 7000 rpm 2-Right (7.5 kW) 7000 rpm 3-Left (7.5 kW) 7000 rpm 4-Top (7.5 kW) 7000 rpm 5-Bottom (5.5 kW) 7000 rpm Feed: 4 kW / 6–36 m/min Knjdjx Dzc Sepfx Aa Eof One driven roller in the table at the outfeed.

Condition: ready for operation (used), Year of construction: 2000, Casadei Matrix A (identical machine to SCM Compact O, R, L, U model) - 2-axis control for aggregate positioning - Four-sided planer and moulding machine - Working width: 25 to 230 mm - Working height (wood thickness): 6 to 155 mm - Max. final cross-section of workpiece: 155 x 230 mm - Minimum workpiece length: 480 mm - Max. adjustable cutting depth: 10 mm - Spindle speed: 6,000 rpm MACHINE EQUIPMENT: - Robust, welded machine frame - Large, soundproofed hood with gas struts - Raised control panel on operator side - Steel infeed table 2,500 x 250 mm Table height: 880 mm Side-mounted, spring-loaded infeed conveyor Manual table lubrication behind jointer 1) Lower horizontal spindle 5.5 kW 2 & 3) Vertical spindles (right & left), each 7.5 kW 4) Upper horizontal spindle 7.5 kW FEED: - Feed speed, adjustable: 5 to 25 m/min Feed motor: 1.1 kW (1.5 HP) ADDITIONAL FEATURES: - CE marking - Power supply: 380 V three-phase, 50 Hz - Lockable main switch, automatic star-delta start Emergency stop front and rear - Installed power: 37 kW (50 HP), IN 62A - Braked motors - Spindle drive via cardan shafts Motor for height adjustment: 0.37 kW - Axial spindle adjustment: Lower horizontal spindle: 0 to 15 mm Kedpfxox Dx Acj Aa Eonf Upper horizontal spindle: 0 to 25 mm Vertical spindles: 0 to 25 mm - Permissible tool diameters: Lower horizontal spindle: Ø 120 to 140 mm Vertical spindles: Ø 100 to 180 mm Upper horizontal spindle: Ø 100 to 180 mm End milling cutter: Ø 140 x 12 x 40 mm - Recommended compressed air supply: 7 bar Working pressure: 6 bar Average consumption: 0.85 Nl/cycle Connection: 1/2" G Operating manual and tools included Year of manufacture: 2000 Price: €9,500

Condition: reconditioned (used), Year of construction: 2013, Leadermac Speedmac 631 Working width: 310 mm, height: 150 mm. Spindles: 6 x 50mm (4x spindles with inverter speed control Bottom (22 kW) - 6000 rpm outboard bearing Right (15 kW) - (4000 to 9000 rpm) straight jointer Left (15 kW) - (4000 to 9000 rpm) straight jointer Top (22 kW) - 6000 rpm, outboard bearing, Top (22 kW) - (4000 to 9000 rpm), outboard bearing, straight jointer Bottom (22 kW)- (4000 to 9000 rpm), outboard bearing, straight jointer Knedsx Dq Rrjpfx Aa Ejf Feed speed 60m/min (Possible to increase). Top feed rollers 200mm (first 2) and 140mm others Connection: 380 V / / 50 Hz Full Documentation included.

Condition: excellent (used), Weinig Hydromat 23C with 6 Spindles. Max width 245mm Max Thickness 160mm Separate electrical panel. Separate remote control panel Automatic lubrication system for bedplates Kedpfex Dq Rfox Aa Eonf Full heavy duty sound enclosure. 15kW feed motor 100m/min No 1.  7.5kw - Bottom 6000rpm straight jointer prepared No 2. 11kw - Right 6000rpm straight and profile jointer prepared No 3. 15kw - Left 6000rpm straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 5 . 30kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 6 . 15kw - Bottom 6000rpm + Outboard bearing + straight and profile jointer prepared 50mm spindles Beam 0.55kW Full documentation included. Heavy duty sound enclosure. Possible to supply with hydro tooling if needed. Possible to supply with full mechanisation if needed.