Pevikom

Condition: excellent (used), Year of construction: 2007, total length: 6,060 mm, total width: 2,550 mm, total height: 2,670 mm, = Additional Options and Accessories = - ADR = Notes = 2007 Welfit Oddyl 20FT Tank Container 24,980 L / 1-compartment UN Portable T-11 2MKD 2 x rail Gbsdpfozud E Rjx Ahmsr steam heating bottom discharge 5 years + CSC test: 12-2028 = Further Information = General Information Year of manufacture: Jan. 2007 Model year: 2007 Weights Unladen weight: 3,650 kg Payload: 32,350 kg GVW: 36,000 kg Functional Cargo space volume: 25,064 L Body brand: Welfit Oddy TC 25,070 L Number of compartments: 1 Condition Technical condition: very good Visual condition: very good Further Information Please contact Arne Honingh for further information.

Condition: used, functionality: fully functional, mileage: 380,641 km, power: 331 kW (450.03 HP), first registration: 10/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Gsdpfjzud Ewox Ahmsbr Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 6 mm Front right - 7 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,507 kg, axle configuration: 3 axles, first registration: 10/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - Schmitz Rotos Full air suspension Insulated double rear doors with 4 steel lockrods Gbodpfxezud Eqj Ahmor FP insulated sidewall, 45 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Double deck with 22 beams Loading capacity 33 euro paletts Length/width/heigth - 1340cm / 249cm / 265 cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 5 mm Front right - 5 mm Middle left - 5 mm Middle right - 5 mm Rear left - 5 mm Rear right - 5 mm

Condition: used, functionality: fully functional, Year of construction: 1985, operating hours: 27,150 h, machine/vehicle number: 2723007, control type: NC control, actuation type: hydraulic, working width: 3,000 mm, sheet thickness (max.): 4 mm, overall weight: 5,500 kg, total length: 4,000 mm, total width: 2,500 mm, total height: 1,700 mm, number of support arms: 3, Equipment: angle stop, documentation/manual, type plate available, This machine is still in use in the factory during the manufacturing process and is ready for demonstration immediately. Gbedpfjzud Ekjx Ahmor

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 10/2019, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Gjdpjzud Edefx Ahmsbr Length/width/heigth - 1340cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 12 mm Front right - 12 mm Middle left - 8 mm Middle right - 8 mm Rear left - 9 mm Rear right - 9 mm

Condition: used, functionality: fully functional, mileage: 482,941 km, power: 346 kW (470.43 HP), first registration: 07/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with high roof GX. Battery, 12 V, 230 Ah, 2 units, maintenance free. Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e. Gearbox MAN TipMatic 12.26 DD. Advanced Emergency Brake Assist (EBA). Driver comfort Air-conditioning system, Climatronic. Comfort driver's seat, air-sprung, with lumbar support and shoulder adjustment. Co-driver's seat, not sprung, length and backrest adjustment. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2 fifth-wheel coupling. Main wheelbase, 3,900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Road speed limiter, adjustable, limiter (engine speed regulation). Technology MMT infotainment system, Advanced Basic. MAN TeleMatics. Exterior Gsdpszud D Hofx Ahmsbr Front headlights, LED. Daytime driving lights, LED. Fog lights, LED. Cornering light, LED. Roof spoiler, 600 mm adjustment range. Side flaps, left folding and right fixed. Tyres Information Front left - 12 mm Front right - 12 mm Rear left inner - 13 mm Rear left outer - 13 mm Rear right inner - 13 mm Rear right outer - 13 mm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 03/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit Thermo King SLX i 300-50, Diesel/Electric, included i-Box, with data recording (CargoWa KRONE axles with air suspension and disc brakes Tyres Information Gbedszud Dyopfx Ahmor Front left - 5 mm Front right - 5 mm Middle left - 5 mm Middle right - 5 mm Rear left - 5 mm Rear right - 5 mm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,917 kg, axle configuration: 3 axles, first registration: 02/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Variable height double deck V7 1650 for 11x3 EURO pal with 22 ALU beams. THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation. Gbedpfjzud Dtox Ahmsr Insulated double rear doors (FP, NX17) foam with double s/steel lockrods. Plastic toolbox with cover holder, sleeves and drawer behind the unit. Black plastic fuel tank SCHMITZ 245l, 1 filling neck ; BIO-Diesel proofing. Tyres - 385/65R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4008mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes) . Tyres Information Front left - 8 mm Front right - 8 mm Middle left - 7 mm Middle right - 8 mm Rear left - 7 mm Rear right - 8 mm

Condition: like new (used), Year of construction: 2022, operating hours: 4,747 h, functionality: fully functional, machine/vehicle number: 329760, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, This machine can still be inspected while powered on at the factory. It has very few operating hours and is in new condition. The original new price was €180,000. Gbsdozud Dmspfx Ahmjr Used CNC vertical machining center, Manufacturer: MAZAK Model: VCN 530 C SmoothG Machine number: 329760 Operating hours: 4747 The tools, fixtures, and vise are not included in the scope of supply. You will find the order confirmation and the machine's specifications in the attachment.

Condition: used, Year of construction: 1998, machine/vehicle number: H981224, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 170 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table width: 180 mm, table length: 4,230 mm, table height: 960 mm, throat depth: 410 mm, clearance between the columns: 3,760 mm, oil tank capacity: 150 l, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, overall weight: 13 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine is still operational and can be inspected at the factory in Northern Germany. Working length: 4100 mm Distance between uprights: 3650 mm Pressing force: 170 tons Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear stop Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Gsdszud Daepfx Ahmjbr Accessories: 1 set of tools

Condition: good (used), Year of construction: 2009, functionality: fully functional, turning diameter over cross slide: 225 mm, spindle bore: 62 mm, turning diameter: 400 mm, turning length: 1,000 mm, total length: 2,100 mm, total width: 1,080 mm, total height: 1,520 mm, overall weight: 1,800 kg, This machine, similar to the WEILER Commodor, is still in working order and can be inspected at the factory in good condition. Gbodpfx Ajzud A Ajhmsr Attached is a PDF with technical data.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,917 kg, axle configuration: 3 axles, first registration: 02/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Variable height double deck V7 1650 for 11x3 EURO pal with 22 ALU beams. THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation. Insulated double rear doors (FP, NX17) foam with double s/steel lockrods. Plastic toolbox with cover holder, sleeves and drawer behind the unit. Black plastic fuel tank SCHMITZ 245l, 1 filling neck ; BIO-Diesel proofing. Tyres - 385/65R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4008mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes) . Tyres Information Front left - 5 mm Front right - 5 mm Middle left - 10 mm Middle right - 10 mm Rear left - 12 mm Godpfx Aozud Avjhmjbr Rear right - 12 mm

Condition: excellent (used), power: 129 kW (175.39 HP), operation weight: 18,800 kg, Year of construction: 2014, operating hours: 14,245 h, Equipment: air conditioning, cabin, CATERPILLAR M320F year: 2014 operation hours: 14.245 hrs. ROPS Airco Radio Back drive camera hydr. 2 piece boom stick: 2,50 meter all hydr. lines (hammer-, gripper-, scissor-) Gbedpfxszud Aps Ahmer Pre-configured for the Trimble GCS900 Quick coupler OQ65 1 x Bucket with 800mm width central lubrication Camso tyres 10.00-20 approx 50% good blade support ( 2.5m width) CE Engine with 129kW Transport : 9x2.5x3.30m operation weight: 18.8 to.

Condition: repair required (used), functionality: limited functionality, operating hours: 27,000 h, Large-format 3D printer for hobbyists and mechanics – ideal as a project or for spare parts Important: The device is partially functional and is explicitly sold in this condition – no guarantee, no returns. Model: Hage 140L-B Type: 3D printer (large format) Printing area: 500 × 700 × 400 mm Condition: Partially functional Sold as: Hobby/spare parts item Operating hours: approx. 27,000 hours Price: €1,700 (negotiable) New price: approx. €75,000 Description: Gbodpfx Ahszudz Esmsr Offered for sale is the large-format 3D printer Hage 140L-B with a generous printing area of 500 × 700 × 400 mm. The device is currently partially functional and is therefore ideal for experienced hobbyists, mechanics, and tinkerers. Whether as a source of spare parts, as a basis for a custom modification, or as a challenge for skilled hands – this device contains a lot of technology and potential. The device has approximately 27,000 operating hours and is sold in its current, partially functional condition. Who is this interesting for? • Hobbyists and makers who enjoy repairing and upgrading • Those looking for spare parts for an existing Hage device • Tinkerers who are looking for a large-format project at a low price Pick-up only. Private sale, no warranty. Loading the printer onto a trailer is possible using a forklift.

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 09/2006, loading space length: 11,550 mm, loading space width: 2,510 mm, loading space height: 2,100 mm, total length: 11,750 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 60 %, wheelbase: 8,600 mm, color: other, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - Steering Axle = More information = Axle configuration Tyre size: 385/65 Make axles: SAF Tyre profile: 60% Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg; Steering Weights Empty weight: 7.300 kg Carrying capacity: 22.700 kg GVW: 30.000 kg Gsdpfx Ajzudzrohmobr Identification Registration number: OJ-09-KX

Condition: excellent (used), 472 USED HOBART - UNGERMANN Pass-Through Proofing Chamber. EXTERNAL DIMENSIONS (in cm): - Width 192 - Length 805 INTERNAL DIMENSIONS (in cm): - Width 157 - Length 734 - Height 200 Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Gjdpezudy Usfx Ahmebr Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: used, mileage: 74,678 km, power: 184 kW (250.17 HP), first registration: 04/2011, fuel type: diesel, empty load weight: 7,490 kg, maximum load weight: 7,510 kg, overall weight: 15,000 kg, axle configuration: 4x4, wheelbase: 4,900 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, cruise control, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, traction control, trailer coupling, * German vehicle * From one owner * Documentation available * Original, only 74,678 km * Body: Meiler roll-off tipper, type RK 8 45 with winter service body * Salt spreader Schmidt Stratos F30-25 VCXN-490 with access ladder * Snowplow Schmidt, type SL30, like new * Can be fully used even outside the winter season thanks to the roll-off hook * Suitable for all containers up to 5.50 m * Condition, see photos * 4x4 all-wheel drive * Nominal capacity 3 m³ - 1,250 liters * Clearing width 3,000 mm * Municipal work platform with municipal connections * Hydraulic connections on the left side * Trailer hitch * Trailer load 12,000 kg * Gross vehicle weight 20,000 kg * Municipal lighting and headlights * Cab with rear window and 3 seats * Air conditioning * Driver's seat, comfort, air-suspended and with seat heating * ASR + ABS * Cruise control * Radio, Bluetooth phone * Engine brake * Immobilizer * Hill start assist * Automatic transmission * Differential lock * Reversing camera * Rotating beacons Gbodpfezudy Iox Ahmjr * Electric windows * Electrically heated exterior mirrors * Sunroof * Wheelbase 4,900 mm * GVWR 15,000 kg * Unladen weight 7,490 kg * Payload 7,510 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend that you inspect and test the goods so that no false impressions arise about their condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, control type: manual, cutting angle (min.): 30 °, cutting angle (max.): 140 °, sheet thickness (max.): 6 mm, overall weight: 800 kg, total length: 1,100 mm, total width: 950 mm, total height: 1,280 mm, Equipment: CE marking, Manufactured by Euromac (Italy) Year of manufacture 2006 Variable cutting angle, degrees 30° – 140° Blade length, mm 220 Max. sheet thickness, mm 6,5 Table size, mm 950 x 1030 Power required, kW 4,0 Gbedpfozudyzsx Ahmjr Machine dimensions, mm 1100 x 950 x 1280 Machine weight, kg 800 The notcher additionally is equipped with radius tool and rectangular slot punch 25x100 mm. Under power.

Condition: ready for operation (used), Year of construction: 1977, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 2,066 rpm, overall weight: 4,600 kg, Heidenhain 3-axis control system Table: 1635 x 700 mm Travel: 1300 x 1000 x 550 mm Spindle: SA 40 Gedjzudyhjpfx Ahmobr Maximum spindle speed: 2066 rpm Weight: 4600 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 95/1543-1, heating capacity: 2.7 kW (3.67 HP), Equipment: type plate available, 1. Side channel blower: Manufacturer: ELEKTOR KARL W. MÜLLER Motor type: SD-600 230/400 V Gjdpfozudxkjx Ahmsbr Power: 2.7 kW Speed: 2820 rpm Differential pressure: 300 mbar Volume flow: 4.6 m3/min 2. Material conveying device Manufacturer: LANCO Type: LA 40-30-S Air pressure: 4-6 bar Power: 2.7 kW Serial number: 08071 CE-95

Condition: excellent (used), Year of construction: 2007, CNC Lathe SPINNER TC 65 2007 ----- Dimensions / Weight Dimensions L × W × H (without chip conveyor): 2.73 × 1.44 × 1.62 m Footprint: 3.93 m² Total weight: 4,200 kg Swing diameter over bed: 425 mm Distance between centers: approx. 600 mm Max. turning diameter: 310 mm Axes Max. travel X-axis: 230 mm Max. travel Z-axis: 740 mm Max. rapid traverse X-axis: 15 m/min Max. rapid traverse Z-axis: 24 m/min Main Spindle Speed (bore 32 mm): 4,500 rpm Spindle head Ø: 100 mm Max. Ø collet chuck: 250 mm Max. permissible collet jaw weight: 1.25 kg Spindle bearing diameter: 120 mm Capacity of clamping cylinder: 65 mm Tailstock Arbor diameter: 80 mm / MK4 Arbor stroke: 120 mm Adjustable travel of tailstock: 475 mm Max. clamping force (at 30 bar): 500 daN Turret Manufacturer: Sauter Type: 0.5.473.516 Type with tool drive: 0.5.480.516 Coupling system: DIN 5482 with gear B15×12 Number of stations: 12 Tool holder: DIN 69880 / 30 mm Driven stations (only TC65-MC): 6 Speed of rotating tools (only TC65-MC): 6,000 rpm Gbodpezudxdefx Ahmsr Torques Main spindle Fanuc (S6 40 %): 178 Nm Main spindle Siemens (S6 40 %): 301 Nm Driven tool TC65-MC, Fanuc (S6 40 %): 7 Nm Driven tool TC65-MC, Siemens (S6 40 %): 9.5 Nm

Condition: used, mileage: 50 km, power: 140 kW (190.35 HP), first registration: 02/2026, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, color: blue, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, Equipment: air conditioning, airbag, all wheel drive, cruise control, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, E07 Hill Start Assist, JA7 Blind Spot Assist, T55 Electric operation for right sliding door, EY5 Mercedes-Benz emergency call system, F1K Coat hooks in driver’s cab, EY6 Breakdown management, B25 Electric parking brake, G43 9G-TRONIC transmission, L65 Roof light(s) in cargo/passenger compartment with door contact, FK3 Chrome radiator grille, RS3 Steel wheels 6.5 J x 16, JK5 Instrument cluster with color display, Z1N N1 homologation, LG7 LED High Performance headlights, SE5 Driver’s seat lumbar support, XO9 Mercedes-Benz MobiloVan with DSB and GgD, CN2 Radiator grille frame in vehicle color, L71 Cargo area lighting via motion sensor, K53 Lockable AdBlue filler cap, QA9 Cross member with integrated step, XG7 Without load increase/decrease 3,500 kg, IR6 Wheelbase 4,325 mm, short rear overhang, HH2 Electric auxiliary heater (hot air), T75 Grab handles for driver and passenger entry, T77 Grab handle for cargo area sliding door at partition, E1B Smartphone tray incl. wireless charging, W54 Rear doors double-winged, opening up to side wall, E1E Digital extra: hard drive navigation, HH9 Semi-automatic TEMPMATIC air conditioning, E1D Digital radio (DAB), Y10 First aid kit, 805 AEJ X4/1, ES0 Jump start connection, D03 High roof, ES5 Charging package instrument panel, FU5 Exterior mirrors without indicators, E1U USB socket 5V, F49 Heated windscreen, FM3 WET WIPER SYSTEM, Q22 Fixed ball-type trailer coupling, T85 Entry handle on rear left corner pillar, HI1 Climate zone 1 (cold/comfort), T86 Entry handle on rear right corner pillar, V43 Wooden floor, V42 Lashing rails on side wall at belt rail, XY5 Model year 5, C6L Multifunction steering wheel, LA2 Headlight assist, ZM0 Panel van, LA1 High beam assist, RM7 Summer tires, E30 Main battery disconnect switch. You can reach us by phone Monday to Friday until 8:00 p.m. and Saturday until 4:00 p.m.! Further information: Leasing/financing and trade-in possible! Gsdpjzudw Tefx Ahmsbr Errors and prior sale excepted! All information without guarantee ... more on our homepage.

Condition: used, mileage: 120,280 km, power: 81 kW (110.13 HP), fuel type: gasoline, gearing type: mechanical, axle configuration: 2 axles, overall weight: 2,040 kg, first registration: 08/2018, fuel consumption (urban): 6.3 l/100km, fuel consumption (extra-urban): 5 l/100km, fuel consumption (combined): 5.5 l/100km, CO₂ emissions: 125 g/km, energy efficiency: B, suspension: steel, number of seats: 5, total width: 1,848 mm, total height: 1,841 mm, fuel: regular/benzine 91, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, traction control, FA16 Driver Assistance System: Hill Start Assist (HSA), KL9 Start/Stop system, TQ5 Visibility Package/High Beam Assist, IO6 Navi900/Navi5.0, K33 Intelligent Speed Control, DD8 Visibility Package/Auto-dimming interior mirror, UVP 180-degree panoramic rear view camera, UDQ Blind Spot Monitoring (up to 140), OLD Wheels 7JJX16-38 alloy, AHM Driver Assistance System: Driver Drowsiness Detection, CJ2 Two-zone automatic climate control, AY2 Head airbag system, CVE Sliding door left with window, electrically operated, CVD Sliding door right with window, electrically operated, RSB Alloy wheels 7x17 (10-spoke), HUD Head-up display, FA25 Rear view camera with 180-degree surround view, GPS Audio navigation system Multimedia Navi Pro, MP3A USB interface front (2x), XIEG Premium Package, CT3 German version, E91 Pocket on passenger seat, GBT Ocean Blue, MM3 Component, transmission, SBK Seatbelt pretensioner rear, T4A Bi-halogen headlights/halogen headlights, TAUH Fabric Mistral Brown, XCJ TIRE ALL 205/55R17 95V BW HW1, CE1 Rain sensor, UW6 Loudspeakers G:6, D42 Luggage compartment cover, C35 Rear footwell heating, A51 Comfort seats driver/+passenger, A2V Comfort driver seat 6-way manual, DCX Passenger seat backrest adjustable, E90 Pocket on driver seat, NCG Child lock, KTI Tire repair kit, UVD Steering wheel heating, FX3 (ESP/ESC), APS 2nd row seats - individual folding seats (3 seats), AIR1 Airbag driver/passenger side, ABS Anti-lock braking system (ABS), UC3 Audio controls on the steering wheel, DXL Exterior mirrors electrically adjustable and heated, electrically foldable, DP6 Exterior mirrors body color, E2R Roof rails silver, T83 Automatic headlight activation, ASC Electronic Traction Control, UGN Driver Assistance System: Emergency Braking Assist, UHX ., We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM!! Gbedozudw Hjpfx Ahmer Further:!! Leasing/financing and trade-in possible!! !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our homepage

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2019, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 8,790 mm, color: other, Year of construction: 2019, Equipment: ABS, = Additional options and accessories = - BPW Axles - Disc brakes = More information = Gbsdpfx Aszudwyohmer Axle configuration Tyre size: 385/65 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.940 kg Carrying capacity: 38.060 kg GVW: 42.000 kg Maintenance APK (MOT): tested until 12/2026 Identification Registration number: OR-36-ZF

Year of construction: 2001, condition: used, functionality: fully functional, Compost turner BACKHUS 10.10. Diesel engine: 264 hp Gbodpfozudwtjx Ahmer Weight: 14.9 tons