Akvapan Cacak

Condition: good (used), Year of construction: 1993, In good technical condition and fully functional. Year of manufacture: 1993. Bedj Ahm Hwjpfx Akiodi Engine power and diameter of the grinding head: Ø 1000 mm Dimensions (m): 7.5 x 3.1 x 3.1 Power consumption according to documentation: 120 kW Magnet (mm): 3000 x 950

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right Optional availabe: (not included in pricing) Bodj Ahm Htjpfx Akijdi Kolbus card Gluer - KK 841 - 2011 Kolbus cold glue spine glue unit - 2011 Description updated: 9-4-2026

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/1995, total width: 2,500 mm, suspension: air, tire size: 385/65R 22.5, tire condition: 20 %, wheelbase: 8,070 mm, color: other, General information Year of construction: 1995 Registration number: OD-19-PX Axle configuration Tyre size: 385/65R 22.5 Make axles: BPW Tyre profile: 20% Brakes: drum brakes Suspension: air suspension Max. front axle load: 9000 kg Middle axle: Max. axle load: 9000 kg Max. rear axle load: 9000 kg Weights Empty weight: 7.570 kg Carrying capacity: 31.430 kg Bdodpfx As Ahm Hpokioi GVW: 39.000 kg Maintenance APK (MOT): tested until 05/2027

Condition: refurbished (used), Used modernised 3D CNC coordinate measuring machine. ZEISS Prismo 10 - second-hand system Equipment freely selectable . . Measuring machine in moving portal design Granite table Equipment can be arranged individually to your requirements. Further details on request Measuring range X =1600 mm - Y = 3000 mm - Z = 1000 mm Measuring accuracy: depending on the selected measuring system Price: on request - please let us know your equipment requirements Bjdo Ahm Hlopfx Akiodi ᐳᐳᐳ Single item - as long as available ᐸᐸᐸ Pease ask for our detailed offer. Of course, we provide all services such as installation, maintenance, service, training. Programming etc. as for a new machine

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 20245200040, arm reach: 1,300 mm, load capacity: 12 kg, type of cooling: water, This listing includes a complete package with a robot and welding equipment. No additional hardware or software is required to start automated welding immediately. The robot has been used in our company as an experimental and testing unit. To this end, the unit was mounted on a mobile cart + table + linear travel axis. As a certified dealer (Cobot Welding Partner), we can provide comprehensive support for cobot welding, tailored to your needs. This includes installation, employee training, and part programming. The price and scope of delivery of the package can be adjusted upon request. Currently, the welding power source is fully equipped and includes all arc welding processes and material characteristics offered by Lorch. The welding software installed on the robot has basic features. This means that the welding power source is fully integrated into the teach panel via its bus system. This function is called "Cobotronic" and is explained in more detail on our website. All software functions can be offered and upgraded as needed. All functions are demonstrated and explained on our website. Bdsde Ahm Hdopfx Akisi Scope of delivery: - Universal Robots UR10e (identical to UR12e) - Lorch pulse welding machine, S5-RoboMIG XT (fully equipped) - Lorch programming software "Cobotronic" (full integration of welding parameters into the robot panel's user interface) - Mounting plate for 16" and 28" welding tables - Torch holder mast incl. balancer for hose package - MIG - water-cooled hose package 3.5 meters, torch holder and torch neck - Ground cable The linear travel axis and welding table can be offered optionally and are not included in the current offer price.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, CNC press brake Pressing force: 640 tons Bending length: 6100 mm Weight: 57,000 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Bdedpfx Akj Ahm E Isiei

Condition: refurbished (used), functionality: fully functional, Used, modernized 3D CNC coordinate measuring machine. The machine has been completely modernized with REVO2, Renishaw’s new high-tech probing system, a new control system, temperature compensation, a new computer system with an i7 processor, Windows 11 Pro operating system, and the latest version of the 3D software RationalDMIS V2025. Bodo Ahm E Depfx Akijdi Technical data: Measuring range: X = 1200 mm - Y = 2400 mm - Z = 1000 mm Measuring uncertainty: MPEE: 2.7 + L/300 MPEP: 1.8 in each case, while adhering to the environmental conditions specified by the manufacturer Machine weight: approx. 7,250 kg Permissible tool mass: 2,500 kg External dimensions of the measuring machine: Length: 3540 mm - Width: 2050 mm - Height: 3770 mm (minimum room height 3870 mm) Free clearance around the machine: 600 mm on each side. The machine is ready for demonstration in our facilities. We would be happy to arrange an appointment for your visit so that we can demonstrate the performance of the system.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 19991798, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel range, X-axis: 2,500 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 550 mm Spindle mount: SK 50 MACHINE DETAILS CNC control: Heidenhain Voltage: 400 V Frequency: 50 Hz Total connected load: 40 kVA Bods Ahm Eyjpfx Akisdi Weight: 2,000 kg EQUIPMENT Siemens motors and servo drives Preparation for 4th axis (4th axis not included) Note: Without tools and clamping devices for the machine table & without mist extraction.

Condition: used, mileage: 152,299 km, power: 425 kW (577.84 HP), first registration: 04/2024, fuel type: diesel, empty load weight: 12,810 kg, overall weight: 26,000 kg, tire size: 385/65 R22,5 - 315/80 R22,5, axle configuration: 6x4, wheelbase: 3,600 mm, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6e, suspension: steel-air, loading space volume: 9 m³, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 800 mm, Equipment: ABS, AdBlue, EBS, additional headlights, cruise control, differential lock, electronic stability program (ESP), lane keeping assist, navigation system, parking air conditioner, parking heater, retarder, traction control, trailer coupling, Urea tank (AdBlue) Engine displacement: 15,569 cc 50 mm trailer coupling Hydraulics (auxiliary drive) Low noise Alloy wheels Distance warning system Payload: 13,190 kg Automatic climate control Turbo-Retarder clutch Sun visor Light bar Rotating beacons Air horns Driver's cab with air suspension LED lighting 1 bunk Cooler box Underrun protection, foldable Roller cover Tie-down rings Total permissible weight: 68,000 kg Trailer load: 55,000 kg VIN: 10751547 Bdodpfxs Ahm Dqe Akiei Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1994, Edge router In very good condition. Bdsdj Ahm Diopfx Akiji

Condition: good (used), mileage: 1,133,914 km, power: 338 kW (459.55 HP), first registration: 03/2008, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, total length: 6,000 mm, total width: 2,500 mm, total height: 3,800 mm, Equipment: ABS, air conditioning, electric window regulation, fog lights, spoiler, = Additional options and accessories = - 2 fuel tanks - 2 sleeping places - Airbag - Armrest - Disc brakes - Front suspension: Leaf - Rear suspension: Air - Roof Spoiler - Sleeper cabin - Sper - Spoilers = More information = Year of construction: 2008 Cab: single Tyre profile: 50% Brakes: disc brakes Bjdpo Ahm Awsfx Akiedi Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Number of cylinders: 6 Technical condition: good Visual appearance: good

Condition: good (used), Year of construction: 1998, In good technical condition and fully functional. Year of manufacture: 1998 Bar diameter: 42 mm Max. main spindle speed: 7,000 rpm Main spindle power: 13 kW Number of tool stations: 7 + synchronized counter-spindle Axis travels: X: 90 mm Z: 280 mm Rapid traverse: X: 27 m/min Z: 36 m/min Automatic bar feeder INDEX LMI, year 1998 + accessories. Bar length: 3.2 / 3.7 / 4.2 m Machine weight: approx. 2,500 kg Bodpfx As Ahm Atekijdi

Condition: excellent (used), Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, solenoid gas valve, gas solenoid valve -Manufacturer: Norgren, magnetic coil unused -Type: 13J -Voltage: 24VDC, 2.0W, 0.08A, IP65 -Quantity: 14 pieces available -Price: per piece / from 2 pieces €10 each. -Dimensions: 44/30/H22 mm -Weight: 0.1 kg/piece Bsds Ahm Apepfx Akiedi

Condition: excellent (used), First lower head, 2.2 kW motor Second lower head, 1.5 kW motor Bdjdpfx Akj Ahm Aleisi Third lower head, 2.2 kW motor Fourth lower head, 2.2 kW motor First upper head, 1.5 kW motor Second upper head, 2.2 kW motor Maximum working height: 20 cm Overall machine length: 210 cm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: DW1408, spindle speed (max.): 6,000 rpm, bar passage: 42 mm, controller model: Fanuc 0i-TF, counter spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Number of axes: 7 Axis configuration: X1, X2, Y1, Z1, Z2, C1, C2 Number of Y axes: 1 Number of spindles: 2 Main spindle speed: max. 6,000 rpm Counter spindle speed: max. 5,000 rpm Bar capacity: max. 42 mm Number of tool turrets: 2 Speed of driven tools: max. 5,000 rpm MACHINE DETAILS Bdodpe Ahm Adsfx Akioi CNC control: Fanuc 0i-TF Type of input current: Three-phase EQUIPMENT 2 tool turrets Main and counter spindle 173E collet chuck on both spindles Y-axis High machine rigidity and precision Documentation/Manual

Condition: used, Vötsch Temperature Shock Chamber / Thermal Shock Chamber Vötsch ShockEvent T/120/V2 Temperature Shock Chamber Hot chamber up to +220 °C / Cold chamber up to -80 °C Workshop-tested – water-cooled design with 120 liter test chamber volume For sale is a used temperature shock chamber from Vötsch Industrietechnik GmbH. The temperature shock chamber is suitable for thermal cycling, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The system features a hot chamber and a cold chamber. The test specimen is transported between the two temperature zones using a movable carriage. This allows for rapid temperature changes to test thermal stress resistance. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: ShockEvent T/120/V2 Device type: Temperature shock chamber / Thermal shock chamber Year of construction: 2018 Hot chamber: up to +220 °C Cold chamber: up to -80 °C Two-chamber temperature shock system Humidity control: not available Water-cooled design Temperature data according to manufacturer's brochure: Hot chamber: +50 °C to +220 °C Cold chamber: -80 °C to +100 °C Temperature change by transporting the test specimen between the hot chamber and the cold chamber Temperature change rates according to manufacturer's brochure: Heating rate hot chamber: approx. 18 K/min Cooling rate cold chamber: approx. 7.5 K/min Refrigerant 1: R449A Refrigerant quantity: 1.70 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 1.30 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 14 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A Test chamber volume: 120 liters Internal dimensions (H × W × D): 410 × 470 × 650 mm External dimensions (H × W × D): 2,450 × 1,000 × 2,530 mm Weight: approx. 1,000 kg Dimensions and weight according to manufacturer's brochure for the base unit of the T/120/V2 model series. Deviations due to equipment features are possible. Equipment: Two separate temperature chambers Hot chamber and cold chamber Movable test specimen carriage Digital control and operating unit Temperature control Water-cooled design Bdjde Ahm Aaepfx Akiji Cooling water connections for supply and return Temperature shock operation Temperature change between hot and cold chamber Electrical connection: 400 V / 50 Hz Refrigeration system with R449A and R23 Temperature monitoring Test specimen mounting in the movable carriage Application areas: Temperature shock testing Thermal cycling Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to pictures Scope of delivery: 1x Vötsch ShockEvent T/120/V2 temperature shock chamber Accessories according to pictures Important note: For the safety of our customers, the following work is carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table or other items not explicitly mentioned in the photos are not part of the sale. Shipping or freight forwarding

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1154182, overall weight: 335 kg, color: blue, output current: 43 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, continuous power (apparent): 30 kVA, total length: 1,215 mm, total width: 770 mm, total height: 930 mm, rotational speed (max.): 430 rpm, Schuko socket (qty.): 3 CEE 5-pole 16A socket (qty.): 1 CEE 5-pole 32A socket (qty.): 1 CEE 5-pole 63A socket (qty.): 1 Bdedpfx Ake Ahmz Ieiei Length (mm): 1,215 Width (mm): 770 Height (mm): 930 Generator type: synchronous Weight (kg): 335 Speed (rpm): 430 Frequency (Hz): 50 Electrical power 1-phase (kVA): 9.8 Voltage 1-phase (V): 230 Current 1-phase (A): 43 Power factor 1-phase (cos φ): 0.8 Electrical power 3-phase (kVA): 30 Voltage 3-phase (V): 400 Current 3-phase (A): 43 Power factor 3-phase (cos φ): 0.8 Protection class: 45 Enclosure type: fully encapsulated

Condition: used, Year of construction: 1999, CNC machining center Manufacturer: Homag Type: BAZ 31/60/K Optimat Year of manufacture: 1999 Technical data - Workpiece length max. 6600 mm with single workpiece placement max. 2700 mm with alternating workpiece placement - Workpiece width max. 1200 mm - Workpiece thickness with edge max. 60 mm without edge max. 60 mm with standard clamp without edge max. 120 mm with clamping template when chamfer milling min. 12 mm when radius milling min. 2x radius + 10 mm - Working height, lower edge of workpiece 950 mm - 2 vacuum pumps, each with 66/100 m3/h for clamping system Main spindle 12 kW, water-cooled - for HSK F63 - Three-phase asynchronous motor 12 kW at S1, 600 Hz - Speed range: 1500 - 18000 rpm - Tool weight max. 6 kg incl. tool holder Tool changer, 12 positions - for tools and aggregates with HSK F63 - 12 x diameter max. 130 mm or Bdodpj Ahmz Defx Akiji - 6 x diameter max. 180 mm and 6 x diameter max. 70 mm - Tool diameter for grinding tools max. 200 mm Aggregate interface BAZ for main spindle For accommodating the machining and gluing aggregates with integrated pneumatic-electrical-electronic supply and pivoting drive, C-axis. Swiveling range without limitation. Hose-free compressed air supply. Drilling head with 17 spindles - 1 motor 1.9 kW, frequency-controlled - Speed selectable via program 4500/6500 or 8000 rpm - Each spindle can be activated individually - Arrangement of spindles in T-shape. - 11 spindles in X-direction, 7 spindles in Y-direction Homatic control system CNC programming system WOODWOP Postprocessor Programming based on CNC drawing Laser positioning aid for vacuum clamping system Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: good (used), mileage: 242,953 km, power: 540 kW (734.19 HP), first registration: 05/2023, fuel type: electric, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 3,900 mm, fuel: electricity, color: white, driver cabin: sleeper cab, emission class: euro6, Equipment: Bluetooth, air conditioning, airbag, cruise control, electric window regulation, = Additional Options and Accessories = - Cab = Notes = FH 540 6x2 XL ELECTRIC! Year of Manufacture: 2023-05-24 Mileage: 242953 VIN: YV2RB40C7PA327198 Leather Sliding 5th wheel 3.90 m wheelbase Full air suspension Veb plus 2023 model year Bsdpe Ahmzrjfx Akiodi Leather Alcoa wheels Side skirts 540 kW = Further Information = Year of Construction: 2023 Cab: Globetrotter XL Front Axle: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40% Rear Axle 1: Tire size: 315/70R22.5; Tire tread depth left: 40%; Tire tread depth right: 40% Rear Axle 2: Tire size: 385/55R22.5; Tire tread depth left: 40%; Tire tread depth right: 40% Technical Condition: good Optical Condition: good

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, type of input current: AC, input voltage: 400 V, electrical fuse: 11 A, empty load weight: 5,370 kg, DGUV certified until: 11/2027, Compactor container LM20 GL DR HKV 20 m³ compactor container for roll-off tippers with lifting and tilting mechanism (raking and rear gate discharge) Technically refurbished Bdsdpfe Ahmzkjx Akiji Repainting in the desired RAL color is possible.

Condition: good (used), machine/vehicle number: 17346, functionality: fully functional, power: 4.78 kW (6.50 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, number of blades: 4, rotational speed (max.): 5,500 rpm, HK 63 combined jointer/thicknesser - Planing width 630 mm, - Cutterhead width 640 mm, - 4-knife cutterhead, - Table length approx. 2100 mm, - Planing height 2-230 mm, - Toothed steel infeed roller, steel outfeed roller, - 2 sliding rollers in the thicknessing table, - Motor 6.5 HP, - Speed 5000 rpm, Bjdpfs Ahmy Usx Akijdi - Feed rate 10 / 16 m/min, - Adjustable fence for the jointer

Condition: used, For Export Only! G&J ML55 Pro film processor with daylight cassette Bdsdpfx Ao Ahmy Hokioi G&J ML860 film processor without daylight cassette 2 x G&J ML860 film processors with bridge for Heidelberg Herkules

Condition: like new (used), Year of construction: 2022, operating hours: 404 h, functionality: fully functional, machine/vehicle number: UHM2260G019A04497, power: 24.27 kW (33.00 HP), first registration: 03/2022, fuel type: gasoline, Equipment: air conditioning, all wheel drive, EGHOLM CITY RANGER 2260 USED EQUIPMENT CHASSIS NUMBER: UHM2260G019A04497 OFFICIAL REGISTRATION: HD-D 1579 FIRST REGISTRATION: 03/16/2022 WITH ONLY 403.7 OPERATING HOURS With the following features: - 33 HP gasoline engine, emission standard Stage V - With permanent 4-wheel drive - All hydraulic functions - Brush speed control - Ball hitch - Start-Stop function for salt and gravel spreader - Comfort cabin (ROPS) approved with StVZO equipment, lighting, mirrors and rotating beacon - Air-suspended Nappa leather seat with armrest - Air conditioning - LED work lights - Rear view camera With the following attachments: - Salt and gravel spreader USED EQUIPMENT Material: Stainless steel and plastic Movable support stand Adjustable spreading width from 1-5 m Spreading rate adjustment by speed-dependent spreader plate rotation speed Stirring finger system and vibration plate prevent bridging of the spreading material Cover for salt and gravel spreader Bodpfxo Ahmy Ae Akijdi - Snow plow 130 cm with rubber edge USED EQUIPMENT Or alternatively: - Front sweeper Winter USED EQUIPMENT With forward/reverse operation and center drive Side adjustment via parallelogram - EX WORKS - WITHOUT ANY WARRANTY, AS IT IS AN ABSOLUTE SPECIAL NET PRICE - INTERMEDIATE SALE RESERVED

Condition: used, For export only! ECRM Mako46, film imagesetter, A2 format, HQ-RIP Bedpe Ahmyxjfx Akisdi ECRM Mako3650, high-speed film imagesetter, A3 format, HQ-RIP

Condition: used, empty load weight: 7,824 kg, maximum load weight: 31,176 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 07/2015, next inspection (TÜV): 02/2027, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 90 m³, total length: 13,620 mm, suspension: air, tire size: 385/65 22,5, tire condition: 50 %, color: blue, Year of construction: 2015, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 42003 Schmitz, S01 Tautliner * Year of manufacture: 2015 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Air suspension * Used tarpaulin * Edscha/sliding roof tarp * Load securing certificate DIN EN 12642 Code XL * Lashing eyelets in the outer frame (Multilock outer frame) * Portal door * Aluminum side guards * Air coupling (red + yellow) * Spare wheel holder * 2x7-pin connector * 15-pin connector * Lifting and lowering mechanism * Storage box/tool box * Document box * Galvanized * Suitable for rail transport - can be lifted by crane * Coil well * Inspections: MOT / emissions test valid until 02.2027 * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 7,824 kg * Payload: 31,176 kg * Permissible gross vehicle weight: 39,000 kg * Axle manufacturer: Schmitz Rotos% Bedpfxe Ahmxhj Akiodi * Tire condition 1st axle: 50% - 40% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 80% - 50% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 30% - 60% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Interior dimensions: L=13620 mm, W=2480 mm, H=2680 mm * Interior volume*: 91 m² * Pallet spaces: 34 Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Quick and easy financing * Application for all (export) documents * Ordering of export license plates/customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists. We will be happy to advise you.