Johann Pramendorfer Ges.m.b.H. & CO. KG

Year of construction: 2010, operating hours: 540 h, condition: ready for operation (used), travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,735 mm, travel distance Z-axis: 250 mm, overall weight: 2,000 kg, number of axes: 4, This 4-axis SCM TECH Z2-27-C wood boring machine was manufactured in 2010. It features a maximum workpiece height of 160 mm, length of 2700 mm, and width of 1300 mm. The machine includes a routing spindle and a horizontal boring unit, ensuring versatility in operations. If you are looking to get high-quality wood processing capabilities, consider the SCM TECH Z2-27-C machine we have for sale. Contact us for further details. • Electrical: 400 V, 3 + N, 33 A, 50 Hz, breaking capacity 10 kA • Control: Xilog Plus Gsdpfozug A Eex Ahmobr • Machining units: saw unit (included), horizontal boring unit (included), routing spindle: 1 • Workpiece capacity: max height 160 mm; max length 2700 mm; max width 1300 mm; max width (double posts) 1210 mm • Max travel speed: 60 m/min • Clamping system: pneumatic locking bars; number of clamping bars: 6 • Suction cup sizes: 120x120 mm and 55x120 mm • Machine on: 5.500 h

Condition: ready for operation (used), Year of construction: 2020, working width: 520 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, working length: 2,310 mm, This SCM Abricht/ Dickenhobelmaschine was manufactured in 2020. It features a working width of 520 mm and an adjustable thicknessing height from 3 mm to 250 mm. The machine includes a "TERSA" cutter block system with 4 disposable knives and offers four feed speeds. Consider the opportunity to buy this SCM Abricht/ Dickenhobelmaschine wood planer. Contact us for further details. • Working width: 520 mm • Thicknessing height: 3–250 mm (adjustable) • Surface table length: 2,310 mm • Feed speeds: 5 / 8 / 12 / 18 m/min • Cutter block: TERSA system, 4 disposable knives, 120 mm diameter • Control unit: READY electronic control Gsdpezug Axefx Ahmobr • Programmability: up to 99 programs • Axis control: motorized vertical adjustment of thicknessing table with digital position display • Power-assisted changeover: pneumatic/hydraulic automatic lifting of surfacing tables • Supply voltage: 400 V, 3-phase, 50 Hz • Main motor: 9 kW (12 HP) with automatic star-delta start • Braking: automatic electronic motor brake • Suction: 120 mm extraction outlets for surfacing and thicknessing

Condition: ready for operation (used), Year of construction: 2006, operating hours: 80,773 h, total height: 2,400 mm, cutting length (max.): 3,200 mm, Panel saw manufactured in 2006. This MAYER AL160 features a saw blade diameter of 650 mm and a maximum cutting width of 3200 mm x 3200 mm. It has a main saw motor power of 35 kW and offers variable forward speeds for both the saw aggregate and infeed. If you are looking to get high-quality panel cutting capabilities, consider the MAYER AL160 machine we have for sale. Contact us for further details. - Main Saw Motor Power: 35 kW- Saw Blade Diameter: 650 mm- Package Clamps / Collets: 210 mm maximum- Saw Aggregate Forward Speed: 0.2 - 60 m/min- Saw Aggregate Return Speed: 60 m/min- Infeed Forward Speed: 10 m/min- Infeed Return Speed: 20 m/min- Extraction Connections: 1 x 140 mm, 1 x 160 mm- Working Height: 1100 mm- Installation Dimensions: approx. 6280 mm (W) x 6855 mm (L)- Cutting Width/Length: 3200 mm x 3200 mm- Compressed Air Volume: 720 Nl/min- Operating Pressure: min. 5 bar, max. 6 bar- Component Condition Notes: Requires repair/adjustment on 3 package clamps, dust protection curtain, and cutting lips at the saw gap Gedpjzug Arofx Ahmsbr

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, number of slots in tool magazine: 5, total height: 3,100 mm, overall weight: 7,500 kg, table length: 4,000 mm, table width: 1,200 mm, spindle motor power: 7,500 W, spindle speed (max.): 18,000 rpm, This 3-axis IMA BIMA 610 V CNC Wood Machining Centre was manufactured in 1996. It features a working area of 4000 mm in the X-axis and 1200 mm in the Y-axis, with a maximum drilling diameter of 45 mm. The machine is equipped with 5 drilling spindles in the X direction and 11 in the Y direction. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 610 V machine we have for sale. Contact us for further details. • CNC Control: NUM CNC Control • Drive System: Siemens SIMODRIVE 611 • Maximum Workpiece Length: 4000 mm • Minimum Workpiece Length: 150 mm • Maximum Workpiece Width: 1650 mm • Minimum Workpiece Thickness: 10 mm • Maximum Workpiece Thickness: 65 mm Gbodpfjzug Alsx Ahmjr • Drilling Spindles (X): 5 • Drilling Spindles (Y): 11 • Maximum Drilling Diameter: 45 mm • Main Spindle Power: 7.5 kW • Main Spindle Motor: Water-cooled • Tool Holder: HSK F63 DIN 69893 • Feed Drive Motor Power: 4 kW • Feed Speed: 1,500–18,000 mm/min • Maximum Tool Weight: 5 kg • Maximum Tool Clamping Force: 10,000 N • Operating Voltage: 400 V ±5% • Supply Voltage: 3/N/PE, 400 V, 50 Hz • Frequency: 50 Hz • Total Connected Load: 33 kVA • Rated Power: 41 kW • Rated Current: 62 A • Connection Cross Section: 16 mm² • Control Voltage: 24 V • Control Current: 52 A • Compressed Air Pressure: 6–10 bar • Air Connection: 1/2" • Required Air Consumption: 28 m³/h • Dust Extraction Connection: Ø100–300 mm • Air Flow Ø100: 14 m³/min • Air Flow Ø140: 28 m³/min • Air Flow Ø160: 36 m³/min • Air Flow Ø180: 46 m³/min • Air Flow Ø200: 56 m³/min • Air Flow Ø280: 105 m³/min • Air Flow Ø300: 127 m³/min • Number of Dust Extraction Ports: 1 • Machine Condition: Disassembled but fully functional Optional Equipment, not included: • Vacuum block suction cups (aluminum) and sliding console • Two milling spindles for synchronous milling with integrated tool changers • Safety fence with associated safety mats • Control cabinet and operating unit • Waste conveyor belt for milled sections

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, This 3-axis IMA BIMA 410 CNC Wood Machining Centre was manufactured in 2000. It features a working area of 3000 mm in X and 1200 mm in Y, with a maximum clamping height of 100 mm. The machine is equipped with an automatic central lubrication system and AC servo motors for precise operation. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 410 machine we have for sale. Contact us for further details. • Working area X: 3000 mm • Working area Y: 1200 mm • Max. clamping height Z1: 100 mm • Max. workpiece thickness Z2: depending on equipment/application • Table height: approx. 1000 mm • Pendulum operation X: 2 × 1400 mm • Free space center X: 200 mm • Pendulum operation alternative X: 2 × 900 mm • Free space center alternative X: 1200 mm • Machine weight: approx. 6000 kg • Guide system: precision linear guides hardened approx. 62 HRC • Central lubrication: automatic for all main axes and ball screw • Drive system: AC servo motors with encoder • X/Y drive: rack and pinion • Z drive: ball screw • Feed rate: 40 m/min • Rapid traverse X/Y: 80 m/min • Rapid traverse Z: 25 m/min • Acceleration: 3 m/s² • Extraction connection main spindle: 300 mm • Extraction connection drilling spindles: 120 mm • Air speed: approx. 28 m/s • Air volume: approx. 7080 m³/h • Vacuum pump capacity: 100 m³/h • Compressed air connection: 1/2" • Air pressure: 6 bar • Control voltage: 24 V DC • Connected load: approx. 24 kVA • Power supply: 3/N/PE 400/230 V 50 Hz • Frequency converter: 0–480 Hz Gbjdpfx Ahozug Afsmsr • Ambient temperature: +15 to +35 °C • Control system: IMATRONIC NT 231 • Interpolation: linear all axes, circular 2.5D • Resolution: 0.001 mm • Spindle: HSK F63 • Tool clamping force: 11000 N • Max tool weight: 6 kg • Speed range: 1500–18000 rpm • Spindle power: 7.5 kW • Cooling: water cooled • CNC axis: 360° rotating • Tool magazine type: plate changer • Tool positions: 18 • Max tool length: 150 mm • Max tool diameter: 100 mm (150 mm with free сосед positions) • Max load: 60 kg • Saw unit motor: 1.5 kW • Saw speed: 5600 rpm • Saw blade diameter: max. 150 mm • Drilling unit: 14 spindles • Spindle stroke: 70 mm • Drive: 2.2 kW • Speed: 3150 rpm • Drill diameter max: 20 mm • Adapter head spindles: 4 • Speed max: 6000 rpm • Drill diameter max: 12 mm Table equipment: • 6 adjustable support arms • 12 suction cups 114 × 159 × 100 mm • 6 suction cups 125 × 75 × 100 mm • Vacuum system: 2-circuit clamping system • Electrical cabinet size: 2000 × 1800 × 600 mm DEFECT: • The main spindle no longer releases the interchangeable drill head

Year of construction: 2020, condition: ready for operation (used), Wood production line manufactured in 2020. This HYMMEN JUPITER JPT C 680/548 mit OFS 850 features a maximum printing width of 548 mm, with a system speed ranging from 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, ideal for the flooring and furniture industries. If you are looking to get high-quality printing capabilities, consider the HYMMEN JUPITER JPT C 680/548 mit OFS 850 machine we have for sale. Contact us for further details. • General system data: • Nominal width: 680 mm • Maximum printing width: 548 mm (expandable to 680 mm) • Maximum panel width in OFS: 510 mm • Working height: 900 mm (+50 mm) • Processing: printing and top coating from above, counter-coating from below • Operating mode: dual-lane up to max. 255 mm part width; otherwise single-lane • System speed: 8–65 m/min • Printing speed: up to 50 m/min • Jupiter digital printing unit (JPT): • Number of colors: 4 • Printheads per color: 8 (max. 10 possible) • Free slots for additional colors: 6 • Printhead type: XAAR 2001 • DLE structure printing unit: • Print rows: 1 • Printheads per row: 8 (max. 10 possible) • Free slots for additional rows: 1 • Total printheads: 8 • Printhead type: XAAR 1003 • Raw panel specifications: • Length: 600–2800 mm • Raw mother-board width before longitudinal ripping: 900–1260 mm • Panels are longitudinally divided prior to digital printing and coating operations • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Cutting format saw: • Longitudinal ripping system with up to 5 saw cuts plus 2 trimming units for production of finished plank widths from 160–510 mm • Finished panel specifications: • Length: 600–2800 mm • Width: 160–510 mm • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Feeding system (infeed): • Type: vacuum portal • Feeding stations: 2 • Discharge positions: 1 • Max feeding capacity: 8 cycles/min; with double stacking: 16 panels/min • Identical stacks per station: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm • Max stack weight: 5000 kg (combined) • Design: without pits • Transport mode: protective plate or pallet • Protective plate (infeed): length 800–2800 mm; width 1000–1260 mm; thickness 20–30 mm (up to 150 mm for pallets); max 80 kg per plate/pallet • Stacking system (outfeed): • Type: drop shaft Gsdpezugz Uofx Ahmebr • Stacking positions: 1 • Max stacking capacity: 30 cycles/min • Identical stacks per position: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm (alternative: 1000 mm) • Max stack weight: 5000 kg (combined) / Alternative stacking configuration maximum stack weight: 3500 kg • Design: with pits • Transport mode: protective plate or pallet • Protective plate feeding method: loading by forklift, separation by robot • Protective plate (stacking): length 800–2800 mm; width 1000–1200 mm; thickness 20–30 mm; max 80 kg per plate; material OSB or HDF • Process aggregates: • Number of aggregates: 35 • Process steps: feeding, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking • Application: • Industrial single-pass digital printing line for high-speed surface finishing of large panels (flooring and furniture), producing realistic wood, stone, or custom decors directly on substrates Additional equipment • Robot for protective plate separation at outfeed (as part of protective plate handling)

Condition: ready for operation (used), Year of construction: 2000, number of axes: 4, total height: 2,550 mm, total width: 2,400 mm, overall weight: 13,000 kg, product length (max.): 12,000 mm, This 4-axis HUNDEGGER K2-A was manufactured in 2000. It features a workpiece cross-section capacity ranging from 20 x 50 mm to 300 x 450 mm, with a minimum workpiece length of 300 mm in automatic mode. The machine includes various components such as an under-table swivel cut-off saw and a universal milling unit. If you are looking to get high-quality CNC wood machining capabilities, consider the HUNDEGGER K2-A machine we have for sale. Contact us for further details. Gbedpjzugw Aofx Ahmer - Machine Type: Fully Automatic Joinery Machine- Workpiece Cross-Section Min.: 20 x 50 mm- Workpiece Cross-Section Max.: 300 x 450 mm- Minimum Workpiece Length (Automatic Mode): 0.3 m (300 mm)- Operating Voltage: 400 / 230 V (3/N/PE)- Electrical Frequency: 50 Hz- Fusing Protection: 3 x 63 A- Peak Power Requirement: 15 kW- Operating Compressed Air Pressure: 8.5 bar (Max: 10 bar)- Compressed Air Flow Requirement: > 600 l/min- Hydraulic Operating Pressure: 100 bar- Noise Emission Level (LpA): 79 dB(A) ± 3 dB(A)- Transport Dimensions (L x W x H): 12.00 m x 2.40 m x 2.55 m- Included / Equipping Components:* Under-table Swivel Cut-Off Saw with HM saw blade (D=735 mm, s=6.0 mm)* Universal Milling Unit with cylindrical cutterhead (D=350 mm, B=120 mm)* Vertical Combo Support* Horizontal Combo Support* Rafter Nail Drilling Unit* Slotting / Mortising Unit* Infeed & Outflow Conveyors / Positioning Trolleys

Condition: ready for operation (used), Year of construction: 2008, workpiece width (max.): 60 mm, total height: 1,550 mm, total width: 1,100 mm, overall weight: 750 kg, product length (max.): 3,200 mm, Edgebander manufactured in 2008. This FELDER G500 features an edge thickness capability of 0.4–5.0 mm, with an optional 8 mm. It accommodates workpiece thicknesses from 8 to 60 mm and offers a feed speed of 11 m/min. The machine includes automatic edge feeding, a Teflon-coated glue roller, and multiple finishing positions. If you are looking to get high-quality edging capabilities, consider the FELDER G500 edgebander we have for sale. Contact us for further details. Machine • FELDER G 500 Edgebanding Machine • Voltage: 400 V • Frequency: 50 Hz • Phase: 3N • Current: 14 A • Power: 5.5 kW • Edge Thickness: 0.4–5.0 mm (optional 8 mm) Gbjdpszugwvjfx Ahmer • Workpiece Thickness: 8–60 mm • Minimum Workpiece Width: 70 mm • Minimum Workpiece Length: 140 mm • Automatic Edge Feeding • Strip Magazine • Coil Diameter: Ø800 mm • Suitable Edge Materials: PVC, ABS, Solid Wood Veneer • Glue Pot Capacity: 2 kg • Glue System: EVA Hot-Melt Granulate • Teflon-Coated Glue Pot • Glue Pot Heating Time: Approx. 12 min • Automatic Glue Temperature Reduction • Pressure Unit with 1 Straight Pressure Roller and 2 Conical Pressure Rollers • End Trimming Unit • Flush & Radius Trimming Unit • Free Finishing Positions: 3 • Chain Conveyor Feed System • Feed Speed: 9 m/min • Extraction Connection: Ø120 mm • Machine Length: 3,200 mm • Machine Weight: 750 kg Additional Equipment • Scraper Unit (mechanically adjustable for R = 2 mm) • Buffing Unit • 2 Motors • 1,400 rpm • 900 W Technical Specification Feed Speed 11 m/min

Condition: ready for operation (used), Year of construction: 2021, total width: 5,851 mm, travel distance X-axis: 3,140 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 245 mm, overall weight: 3,000 kg, controller manufacturer: BIESSE, controller model: HH660 PC-based control, spindle motor power: 13,200 W, product length (max.): 7,116 mm, spindle speed (max.): 24,000 rpm, number of axes: 4, This 4-axis BIESSE Rover A 1232 was manufactured in 2021. It features a working area of 3140 mm in the X-axis, 1260 mm in the Y-axis, and a Z-axis travel of 245 mm. The machine is equipped with an electrospindle power of 13.2 kW and a maximum tool diameter of 113 mm. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover A 1232 machine we have for sale. Contact us for further details. • Power supply voltage 400 VAC • Full load current 31.7 A Gbodozugwpspfx Ahmsr • Number of power supply phases 3 • Installed power 18.66 kW • Frequency 50 Hz • Short circuit protection rating 10 kA RMS Sym • Working area X 3140 mm • Working area Y 1260 mm • Working area Z 245 mm • Max panel thickness: depends on vacuum module height (H74 / H29) and tooling • Workpiece support length 1200 mm • Vacuum pump capacity 90 m³/h • Vacuum pump capacity 108 m³/h at 60 Hz • Vacuum system dry pump • Electrospindle power 13.2 kW • Electrospindle speed 12000 to 15000 rpm S1 • Electrospindle speed 12000 to 24000 rpm programmable • Tool holder HSK F63 • Rotation clockwise and counterclockwise • Two separate magazines installed: • 8-position tool magazine (rear / Y-axis area) • 13-position tool magazine (main X-axis unit) • Maximum tool diameter 113 mm • Maximum tool length 110 mm • Maximum tool weight 7.5 kg • Maximum total magazine weight 32 kg • Vacuum system:Configurable vacuum pump system. Available configurations include:– 2 × 90 m³/h– 2 × 100 m³/h– 1 × 250 m³/h

Condition: like new (used), functionality: fully functional, type of input current: three-phase, total length: 5,000 mm, total height: 1,500 mm, total width: 1,300 mm, input voltage: 400 V, overall weight: 800 kg, year of last overhaul: 2026, product height (max.): 120 mm, product height (min.): 10 mm, product length (max.): 550 mm, product length (min.): 50 mm, Ilapak SMART Horizontal Flowpack Packaging Machine, used. Condition: very good - like new Machine specifications: - Machine speed up to 100 cycles per minute (cpm) - Sealing jaw length 250mm, new straight blade - Acceptable dimensions of the packaged product: length: 50-550mm, width: 20-230mm, height up to 120mm - Adjustable forming shoulder - Maximum film reel length: 630mm - NPNB (No product no bag) system - Sensor for working with printed film - Overall machine length: 5m, width: 1.3m, height: 1.5m Gbjdezugwiepfx Ahmsr - Weight: 850 kg Additional systems: - Vacuum system for removing air from the package - Gusseting film folding Optional: - Printer - Labeling machine

Year of construction: 2026, condition: new, Messan P07 - Pneumatic press for hole punching in reinforcement sheet iron Gbodpfszugwcjx Ahmor - Working system - pneumatic - Opens holes for handle and lock holes - Punching molds are changeable - Maximum thickness of the sheet iron 1.50 mm - Option - special mould for different forms

Condition: used, mileage: 152,900 km, power: 110 kW (149.56 HP), first registration: 06/2021, fuel type: diesel, empty load weight: 2,066 kg, overall weight: 2,800 kg, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, electronic stability program (ESP), navigation system, onboard computer, parking heater, Special equipment: Equipment package: Comfort Package Plus, grab handles on A-pillars, seat cover/upholstery: fabric Bricks, seats in the cab: driver's seat adjustable in height, seats in the cab: lumbar support for driver's seat, interior lights in the cab: front reading light, illuminated glove compartment, sun visors with mirror, sockets (12V connection) in the cab (2), waste container, onboard tools and jack, driver assistance system: rear parking aid, floor mats in the cab: rubber, vehicle without child safety lock in the cargo/passenger compartment, high cargo compartment partition with sliding window, truck registration, multi-function display Plus, emergency call system, smoker's package, spare wheel in driving condition, heated windshield washer nozzles and indicator for windshield washer fluid level, heated windshield washer nozzles, indicator for windshield washer fluid level, "Transporter" lettering on the fender, seats in the cab: double passenger seat with storage compartment (lockable) in the seat box, auxiliary heater with remote control and auxiliary heating (hot water), 2nd battery with battery monitoring, lashing rails in the cargo area - on the side wall, lining in the cargo/passenger compartment: high wood paneling, lashing eyes reinforced, permissible total weight 3.00 t Gbsdozugv Sjpfx Ahmor Additional equipment: Airbag passenger side switchable, airbag driver/passenger side, anti-slip regulation (ASR), exterior mirrors electrically adjustable and heated, exterior mirror convex, left, exterior mirror convex, right, flooring in the cab: rubber, deactivation switch for anti-slip regulation (ASR), driver assistance system: multi-collision brake, windshield laminated glass, radio remote control (2) foldable, glove compartment lockable, rear hinged doors (raised version), interior release for tailgate/rear hinged doors, interior lights in the cargo/passenger compartment: LED, interior filter: pollen filter, body/superstructure: box high-roof standard, body version: high roof, fuel tank: 70 liters, radiator grille with chrome strips, steering column (steering wheel) adjustable, engine 2.0 L - 110 kW TDI, rear fog light, radio reception digital (DAB+), wheel covers, wheelbase 3400 mm, low emissions according to emission standard Euro 6d-TEMP, sliding door cargo/passenger compartment right, steel rims 6.5x16, start/stop system engine, warning system for seat belt (driver side), heat-insulating glazing Equipment was determined with the help of a VIN query, technical errors may occur. Sale only to commercial enterprises (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, mileage: 103,600 km, power: 105 kW (142.76 HP), first registration: 09/2019, fuel type: diesel, empty load weight: 2,355 kg, overall weight: 5,000 kg, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), navigation system, onboard computer, parking heater, Special equipment: Airbag, passenger side, 13-pin trailer socket, grab handle on the rear right B-pillar, tachograph controls at the front under the headliner, suspension: stabilization level II, fixed window in the rear roof, windows for rear doors/tailgate with wiper/washer system, rear window wiper, vehicle without start/stop system, heated rear window, tailgate (opening angle 270 degrees), wooden floor in the cargo area, connection strip for electrical connections (driver's seat base), cargo area partition with window, cable duct on the rear portal, cable duct on the side panel, marker lights on the side, multimedia system MBUX (7" touchscreen), hands-free system Bluetooth, steering wheel with multi-function controls, navigation system for MBUX multimedia system, parking package with reversing camera, smoker's package, spare wheel in driving condition, spare wheel holder under the frame end incl. jack, interior rearview mirror, mud flaps at the rear, mud flaps at the front, safety belt system with warning system (passenger side), seats in the cab: double passenger seat, seats in the cab: driver's comfort seat, seats in the cab: driver's seat with lumbar support, step for the tailgate, lining in the cargo/passenger compartment: plastic (simple) half-height, rear wall lining, lashing rails in the cargo area - side panel on the bulkhead, lashing rails in the cargo area - side panel on the roof frame, fleece battery 92 Ah, reinforced front axle, jack, thermal insulation driver's cab, thermal insulation cargo/passenger compartment, auxiliary heater (air) electric, auxiliary heater (hot water), additional heat exchanger Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag driver side, traction control system (ASR), display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display, headliner in the cab, automatic activation for driving lights, grab handle for the sliding door at the cargo area partition, electronic brake force distribution (EBV), digital tachograph, downloadable, body/structure: high-roof standard van, child safety lock, communication module (LTE) for digital services, fuel tank: main tank 71 liters, steering wheel (steering column mechanically adjustable), headlight range adjustment, Mercedes-Benz emergency call system, engine 2.1 L - 105 kW CDI CAT, wheelbase 3665 mm, low emission according to exhaust standard Euro 6, sliding door cargo/passenger compartment right, safety belt system with warning system (driver side), seat cover/upholstery: fabric, trailer stability assist (TSA), service interval indicator Assyst, thermal protection glazing (windshield with band filter at the top), permissible total weight 5.00 t Gedpszugv Esfx Ahmebr Equipment was determined using a VIN query, and technical errors may occur. Sale only to commercial businesses (agriculture, freelancers, small and medium-sized enterprises) or for export. Errors and prior sale reserved.

Condition: ready for operation (used), Year of construction: 2008, total width: 1,350 mm, total height: 2,100 mm, overall weight: 2,200 kg, product length (max.): 7,000 mm, Laminating press manufactured in 2008. This Barberan PUR 46 L features a total power of 45.5 kW and operates at a voltage of 400 V. The machine dimensions are approximately 7000 × 1350 × 2100 mm, with a weight of around 2200 kg. If you are looking to get high-quality laminating capabilities, consider the Barberan PUR 46 L machine we have for sale. Contact us for further details regarding this machine. • Total power: 45.5 kW • Power supply voltage: 400 V • Operating voltage: 110 V • Current type: AC • Frequency: 50 Hz • Motor protection: IP55 Gjdpezugvxefx Ahmebr • Air pressure: 6 bar • Air consumption (primer): 100 NL/min • Air consumption: 40 NL/min • Extraction diameter: Ø100 mm • Air flow rate: 700 m³/h Additional equipment • Pre-melter: approx. 200 kg; dimensions approx. 1050 × 820 × 1830 mm • Flame treatment unit with ozone filter: approx. 500 kg

Condition: ready for operation (used), Year of construction: 2006, table width: 1,520 mm, table length: 6,200 mm, travel distance X-axis: 6,821 mm, travel distance Y-axis: 1,963 mm, travel distance Z-axis: 663 mm, controller manufacturer: BIESSE, controller model: XP600 PC-based control with Windows XP WRT, spindle motor power: 9,000 W, spindle speed (max.): 22,000 rpm, number of slots in tool magazine: 22, number of axes: 5, This 5-axis BIESSE Rover C 9.65 was manufactured in 2006. It features a working area of 6200 mm in X and up to 1935 mm in Y, with a Z-axis travel of 663 mm. The machine is equipped with a powerful 8 kW spindle and a tool changer with 22 positions. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover C 9.65 machine we have for sale. Contact us for further details. • Drive system X-axis: rack and pinion • Drive system Y-axis: ball screw • Drive system Z-axis: ball screw • Guide system: linear guides with recirculating ball bearing blocks • Motors: brushless motors with digital drives • Programming formats: DXF and CID3 • Main spindle type: 5 interpolating axes machining unit • Spindle power S1: 8 kW at 12000 rpm • Spindle power S6: 9 kW at 12000 rpm • Maximum spindle speed: 22000 rpm • Tool interface: HSK F63 • C-axis rotation: 360° continuous • C-axis speed: 13.5 rpm • B-axis rotation: ±100° (positioning) / ±98° (interpolation) • B-axis speed: 13.5 rpm • Z-axis feed speed: 30 m/min • Vacuum system: multi-zone vacuum with connections on both sides • Vacuum pump capacity: 250 m³/h (50 Hz) / 300 m³/h (60 Hz) • Worktable: ATS system with modular supports • Number of workpiece supports: 10 • Number of module carriers: 40 • Module size: 132 x 132 x H41.5 mm • Vacuum module size: 132 x 146 x H74 mm / 132 x 54 x H74 mm • Total module height: 115.5 mm Godpfx Ahozugvrsmjbr • Clamping system: vacuum and pneumatic (Uniclamp optional) • Clamping force Uniclamp: 220 kg at 7 bar • Minimum workpiece length (Uniclamp): 140 mm • Drilling unit: BH 42 L • Vertical drilling spindles: 29 • Horizontal drilling spindles: 6 (double output) • Grooving saw diameter: 120 mm • Drilling spindle speed: up to 6000 rpm • Tool changer: chain type • Tool changer capacity: 22 positions • Tool spacing: 180 mm • Max tool diameter (full load): 175 mm • Max tool diameter (single): 250 mm • Max tool length: 268 mm • Max tool weight: 7.5 kg • Total tool weight: 100 kg • Pick-up tool changer: 1 position • Max tool weight pick-up: 8 kg • Electrical supply: 380/400/415 V 50/60 Hz • Inverter for spindle: up to 14 kW • Cooling system: liquid cooling unit for electrospindles (1600 W) • Lubrication system: automatic centralized lubrication • Safety system: CE compliant with safety mats, guards and emergency stops • Chip removal: integrated chip conveyorIn 2023, the machine received a new 5-axis spindle head HS552 A HD 0S2 + ES360 F63 9 kW

Year of construction: 2026, condition: new, Messan 500CW - Machine for cutting and hole punching in reinforcement sheet iron - Working system - hydraulic - Punching the handle and lock holes Gedpezugvlsfx Ahmsbr - Punching and cutting moulds can be changed - Maximum thickness of the iron sheer 2.5 mm - Option - special mould for different forms

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 3,860 mm, travel distance Y-axis: 1,793 mm, travel distance Z-axis: 185 mm, number of axes: 3, overall weight: 4,300 kg, spindle motor power: 17,000 W, spindle speed (max.): 24,000 rpm, This 3-axis Weeke CE OPTIMAT BHC VENTURE 3 was manufactured in 2002. It features a powerful 17 kW main motor and a maximum spindle speed of 24,000 rpm. The working field measures 3250 × 1250 × 1215 mm, with a rapid traverse speed of 100/50/20 m/min. Ideal for diverse CNC woodworking tasks, it also requires 7 bar of compressed air and has a dust extraction capacity of 3170 m³/h. Contact us for more information about this machine. • Electrical power: 400 V · 50 Hz · 3~+N · 17.5 kW · 35 A · 24 V • Milling spindle: 1 unit Gsdpfx Ahozugvfjmobr • Working field (X/Y/Z): 3250 × 1250 × 1215 mm • Rapid traverse speed (X/Y/Z): 100 / 50 / 20 m/min • Routing area: 3595 × 1378 × 125 mm • Alternative operation area: 1450 mm • Two-field operation area: 1100 mm • Compressed air required: 7 bar • Dust extraction (minimum): 3170 m³/h

Condition: ready for operation (used), Year of construction: 2010, This 3-axis MASTERWOOD OM B1 CN3KF was manufactured in 2010. It features a Bedano head and a horizontal milling motor, ideal for creating slots for shutters or blinds. With a working length of 2600 mm and a very good condition, it includes a PC with integrated software running Windows XP. Consider the opportunity to buy this MASTERWOOD OM B1 CN3KF CNC Wood Machining Centre. Contact us for more information. Machine Benefits Technical Machine Benefits • Working length: 2600 mm • The machine has a bedano head + horizontal milling motor to make slots for shutters or blinds. • The software is integrated into the supplied pc and can make slots with bedano and slots for shutters. • Supplied pc with windows xp operating system. • Very good condition and does not have many working hours. Extra Information Gedpozugu Usfx Ahmebr Machine still under power

Condition: ready for operation (used), Year of construction: 1995, This SCHELLING FLM 365.002 panel saw was manufactured in 1995. It features a main saw blade diameter of 400 mm and a scoring saw blade diameter of 200 mm, with a maximum saw blade projection of 80 mm. The machine is capable of processing materials like acrylic and glass-fiber reinforced plastic, with a maximum panel length of 3000 mm and a maximum thickness of 80 mm for acrylic. Consider the opportunity to buy this SCHELLING FLM 365.002 panel saw. Contact us for further details. • Technical data: • Main saw blade diameter: 400 mm • Scoring saw blade diameter: 200 mm • Max. saw blade projection: 80 mm • Max. clamp opening: 100 mm • Max. stack height: 60 mm • Main motor power (50/60 Hz): 15 / 18 kW • Saw unit feed speed: 0.2 – 22 m/min • Saw unit return speed: 22 m/min • Forward feed speed: 10 m/min • Backward feed speed: 10 m/min • Working height: 930 mm • Performance and requirements: • Processable materials: Acrylic, glass-fiber reinforced plastic (GFRP) • Max. panel length: 3000 mm • Max. panel width: 2200 mm • Max. thickness (Acrylic): 80 mm • Max. thickness (GFRP): 60 mm • Edges: deburred • Panel flatness: max. wave 5 mm • Thickness tolerance: ±0.2 mm • Electrical power consumption: approx. 25 kW • Supply voltage: 380 V / 50 Hz • Compressed air requirement: approx. 100 l/min (6 bar) • Extraction requirement: approx. 4000 m³/h (air speed 32 m/s) • Equipment (included with the machine): • Scoring unit • Servo-driven feed (0 – 40 m/min) • Side guides on roller table, automatic adjustment; adjustment range 80 – 2200 mm • Safety light curtain with separate support frame • Hold-down clamps (according to machine configuration) • Cooling and spraying system • Computer control – COMMANDER (PLC/SPS) with display, membrane keyboard, diagnostic system • Graphical display of cutting plans Gsdpfxjzugu Is Ahmjbr • Electrical cabinet and control integrated in the machine • Slow scoring / pre-cut function

Condition: used, mileage: 240,577 km, power: 125 kW (169.95 HP), first registration: 02/2016, fuel type: diesel, empty load weight: 2,395 kg, maximum load weight: 1,105 kg, overall weight: 3,500 kg, wheelbase: 3,520 mm, next inspection (TÜV): 03/2028, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 3, maximum speed: 160 km/h, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, sliding door, soot filter, traction control, truck registration, * Transmission occasionally indicates a malfunction!!! * Vehicle is ready to drive * Vehicle ID number: ZCFC135C505077361 * TÜV/MOT valid until: Special equipment: * Storage compartment package * Trailer socket preparation * Audio navigation system: CD player with MP3 capability, USB, and Bluetooth hands-free system * Electrically adjustable and heated exterior mirrors * Roof storage compartment with DIN compartment * Driver assistance system: Lane monitoring assistant * Vehicle key with remote control * Rear axle suspension: Air suspension * Speed control system (cruise control) * Rear door (opening angle 260 / 270 degrees) * Wooden floor in the cargo area * Automatic climate control * Instrument cluster with pixel matrix display * Head airbag system (window bag) * Fuel tank: 90 liters * Compressor 170 ccm * Fog lights with static cornering lights * Reversing camera preparation * Seats in the driver's cab: Luxury driver's seat Standard equipment: Gbedpfx Aezuguzjhmer * Airbag, driver side * Anti-lock braking system (ABS) * Anti-slip regulation (ASR) * Drive type: Rear-wheel drive * Model: S-series * Exhaust pipe on the left side * Brake assist * Interior light in the cargo area * Electronic brake force distribution * Electronic stability program (ESP) * Front axle suspension: Transverse leaf spring * Power windows * Wing doors at the rear * Tinted windshield and side windows * Generator 150 A * Transmission: Automatic - Hi-Matic (8-speed) * Body/superstructure: High-roof box van with overhang * Cargo area partition * Headlight range adjustment * Engine: 3.0 L - 125 kW Diesel catalytic converter * Wheelbase 3520 mm * Tire repair kit * Diesel particulate filter * Low emissions according to Euro 5 emission standard * Sliding door for cargo/passenger compartment, right side * Power steering * Seats in the driver's cab: Double passenger seat with headrests * Steering AV overhang * Daytime running lights * Immobilizer * Central locking with remote control * Permissible total weight: 3.50 t Delivery possible throughout Germany!!! Trade-in possible!!! Leasing and financing possible even without a down payment Errors, printing errors and prior sale are subject to change.

Condition: used, mileage: 21,731 km, power: 129 kW (175.39 HP), first registration: 10/2022, fuel type: diesel, empty load weight: 2,744 kg, maximum load weight: 756 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,450 mm, next inspection (TÜV): 08/2028, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: other, number of seats: 3, loading space volume: 2 m³, loading space length: 3,600 mm, loading space width: 2,000 mm, loading space height: 400 mm, maximum speed: 160 km/h, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), hydraulics, immobilizer system, soot filter, traction control, trailer coupling, truck registration, * Vehicle ID/VIN: ZCFC635C7N5504371 * New inspection/MOT * New service Gbedpfx Aezuguuohmor Nationwide delivery possible!!! Trade-ins accepted!!! Leasing and financing options available, even without a down payment. Errors, printing errors, and prior sale are subject to change.

Condition: excellent (used), mileage: 364,995 km, power: 228 kW (309.99 HP), first registration: 10/2007, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, total length: 9,700 mm, total width: 2,500 mm, total height: 3,450 mm, Year of construction: 2007, Equipment: AdBlue, = Additional options and accessories = - PTO = Notes = Despite our best efforts to ensure the accuracy of the data, we cannot be held liable for any errors in this advertisement. Images may differ from the actual vehicle. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino = Further information = Technical information Number of cylinders: 6 Engine displacement: 9,186 cc Axle configuration Front axle: Steerable; Suspension: Leaf spring suspension Rear axle 1: Steerable; Suspension: Air suspension Rear axle 2: Dual tires; Suspension: Air suspension Weights Unladen weight: 14,590 kg Payload: 11,410 kg GVW: 26,000 kg Gedpfx Aezugunshmobr Functional Pump: Yes Condition Technical condition: very good Optical condition: very good Further information Please contact Thierry Leemans for more information.

Condition: ready for operation (used), Year of construction: 2011, total width: 4,200 mm, total height: 2,900 mm, overall weight: 700 kg, Panel saw manufactured in 2011. This HOLZHER 1255 3858/1-101 features a maximum cutting length of 3,300 mm and a cutting height of 2,200 mm, providing versatile cutting capabilities. With a powerful 4.0 kW saw motor and integrated control system, it ensures precision and efficiency. Consider the opportunity to buy this HOLZHER 1255 3858/1-101 panel saw. Contact us for further details. • Cutting capacity: horizontal 3,300 mm; vertical 2,200 mm; cutting depth 60 mm • Saw motor power: 4.0 kW • Electrical: 400 V, 50 Hz Gbodpfxezuguho Ahmer • Blade diameter: 250 mm • Blade speed: approx. 5,450 rpm • Cutting directions: vertical and horizontal • Angle cutting device: 0°, 22.5°, 45° • Dust extraction interface: port diameter 120 mm; required capacity approx. 1,400 m³/h • Control system: Integrated HOLZ-HER control (electronic positioning system) • Safety equipment: full blade guarding; two-hand safety control; mechanical hold-down system Dimensions Machine Depth 1600 mm

Year of construction: 2004, condition: ready for operation (used), controller manufacturer: SIEMENS, overall weight: 1,200 kg, total width: 1,200 mm, total height: 1,900 mm, product length (max.): 2,800 mm, number of axes: 4, This 4-axis WEIRATHER KS1300/4 was manufactured in 2004. It features a maximum milling length of 1300 mm and a milling diameter of 300 mm, making it suitable for various applications such as tool handles and furniture components. The machine operates with a Siemens control system and has a cutter shaft speed of 5300 rpm. If you are looking to get high-quality milling capabilities, consider the WEIRATHER KS1300/4 wood mill we have for sale. Contact us for further details. • Condition: Used • Electrical: 400 V, 50 Hz, 4.0 kW • Number of spindles: 4 • Machining principle: Longitudinal milling • Capabilities: • Max milling length: 1300 mm • Max milling diameter: 300 mm • Max recommended workpiece size: 1300 x 150 mm • Cutter shaft speed: 5300 rpm • Operation/features: Low-vibration, smooth running; high dimensional accuracy and clean surface finish • Lubrication: Automatic central lubrication (reduced maintenance) • Production type: Suitable for series production • Workpiece type: Long and 3D-contoured parts • Material suitability: Hardwood, softwood, multiplex, MDF, selected plastics (with suitable cutters) Gedpfozugubsx Ahmsbr • Typical applications: • Tool handles, hammer/axe/garden tool handles, walking stick handles • Gun stocks, pistol grips, bow risers • Furniture parts: armrests, back rails, handles, decorative moldings, wooden feet • Balusters, posts, handrail and volute segments • Paddle and oar handles and shafts • Consoles, corbels, decorative supports, sculptural elements • Foundry patterns, gauges, templates, fixture components • Knife and tool handles, pestles, kitchen utensil handles • Certification/conformity: CE marked; EC declaration of conformity available • Test run: Possible under power by appointment • Included: Machine as shown Additional equipment • Optional: Additional milling cutters available • Optional: Additional templates (only if shown or explicitly mentioned)

Year of construction: 2026, condition: new, functionality: fully functional, travel distance X-axis: 3,010 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 260 mm, overall weight: 2,300 kg, feed rate X-axis: 55 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 12, swivel angle A-axis (max.): 180 °, number of axes: 4, ACROLOC SBZ 200 | 4-axis CNC profile machining center with German CAM software camQuix The ACROLOC SBZ 200 is a powerful CNC profile machining center for the professional and economical processing of aluminum profiles. The machine was designed for industrial use and combines high processing speed, precision, and flexibility with modern and user-friendly programming. A particular highlight is the German CAM software camQuix from camProx. It was specifically developed for the processing of aluminum profiles and offers clear 3D programming with DXF import, parametric machining, automatic tool assignment, intelligent clamping management, and collision detection. This allows machining operations to be conveniently prepared, visualized, and checked for potential collisions even before production. This reduces setup times and increases process reliability. Technical highlights: 4 interpolated CNC axes Spindle swivel range from -90° to +90° High-performance electric spindle with 5 kW Maximum speed 24,000 rpm Tool interface HSK F50 Automatic tool changer with 12 tool positions Additional position for a larger tool 6 automatic profile clamps Travel range X-axis 3,010 mm Travel range Y-axis 330 mm Travel range Z-axis 260 mm Speed X-axis up to 55 m/min Speed Y-axis up to 40 m/min Speed Z-axis up to 30 m/min Machine enclosure Industrial and robust machine construction The SBZ 200 enables milling, drilling, threading, pocketing, slotting, and free-form contour machining on aluminum profiles. Thanks to the 4 interpolated axes and the pivoting spindle, profiles can be machined from different angles without having to manually realign the workpiece for each machining side. The 6 automatic profile clamps ensure secure and stable workpiece clamping. In conjunction with camQuix, clamping positions are already taken into account during programming and included in the collision detection. Gjdpjzugtwjfx Ahmsbr The ACROLOC SBZ 200 is particularly suitable for window and facade construction, doors and portal systems, mechanical engineering, vehicle construction, and for general industrial aluminum profile machining. An interesting alternative in the premium segment With 4 interpolated axes, 24,000 rpm, HSK F50 spindle, automatic tool changer, 6 automatic profile clamps, and especially the German camQuix CAM software, the ACROLOC SBZ 200 offers an interesting alternative to established profile machining centers from Elumatec, Emmegi, Pertici, and Mecal. A significant advantage is the complete package of modern machine technology, powerful German CAM software, and direct technical support from ACROLOC. Inspection and demonstration are possible by appointment. Upon request, customer-specific profiles and concrete machining tasks can also be considered during the demonstration.