Fa Günter Reichmeier

Condition: good (used), Year of construction: 2018, functionality: fully functional, total width: 800 mm, total length: 1,500 mm, total height: 2,000 mm, overall weight: 300 kg,

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Manufacturer: USF Schlick Wheelabrator Model: Roto-Jet Type: 2600-601-17 Year of manufacture: 2009 Control system: Siemens Number of blast turbines: 4 Power per turbine: 22 kW Blasting output per turbine: 7 kg/h Blasting speed: 450 kg/min Blasting velocity: 80 m/s Max. workpiece dimensions: 1,400 x 1,000 mm Chamber diameter: 2,200 mm MACHINE DETAILS Documentation available: Yes CE marking: Yes Year of manufacture: 2009 EQUIPMENT Vibratory screen for abrasive media and discharge materials Feeding via external rail system possible Hnjdpjxw Sfqsfx Ah Hjw

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Fan motor power - 2.2 kW Number of filter bags - 1 Power supply - 380 V Rated capacity - 3,300 m3/h Year of manufacture - 2013 Hodpfexw Sfksx Ah Hjnw

Condition: good (used), Year of construction: 1991, functionality: fully functional, CNC Tool Milling Machine HERMLE UWF 900 W Year of manufacture: 1991 Control: Heidenhain TNC 360 X-axis travel: 600 mm Y-axis travel: 400 mm Hnodpfx Ahjxw Sd To Hew Z-axis travel: 420 mm Spindle taper ISO: SK 40 Vertical quill stroke: 75 mm Speed range: 20 ... 4000 rpm Spindle head swivels left and right: 90° left / right Feed rate X/Y/Z: 1...6000 mm/min Rapid traverse X/Y: 7 m/min + Z: 6 m/min Table size: 900 x 460 mm Table load capacity: 400 kg Total power requirement: 13 kW Machine dimensions (approx.) LxWxH: 4.0 x 3.8 x 2.0 m Weight (approx.): 2300 kg Equipment: - Separate production cell - Coolant system - Swivelling control panel with arm - Heidenhain SK 40 touch probe - Handwheel

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Conventional Lathe WEILER Praktikant 140 B Year of manufacture: 1985 Working area: Centre height: 140 mm Centre distance: 650 mm Swing diameter over bed: 280 mm Swing diameter over cross slide: 190 mm Spindle: Spindle taper: DIN 55027/DIN ISO 702-3 Gr. 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm Hnedpfx Asxw Sbxeh How Main drive: Drive power: 2.6 / 3.1 kW Speed range: 48 – 2,500 rpm Number of speeds: 16 Feed range: Number: 24, Longitudinal feed: 0.02 – 0.63 mm/rev, Cross slide: 0.006 – 0.2 mm/rev. Length x Width x Height: 1600 mm × 800 mm × 1300 mm Weight: Approx. 650 kg

Condition: used, functionality: fully functional, mileage: 426,567 km, power: 346 kW (470.43 HP), first registration: 07/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Hedpfxsxw R U Ro Ah Honw Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver's seat, air-sprung, with lumbar support and shoulder adjustment Co-driver's seat, not sprung, length and backrest adjustment Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: 571120240869, Lightly used: Edda CNC carton cutting machine Very neat machine, offered for sale due to a change in production. The machine can be seen in operation on site and is still in use. Site visits and demonstrations are possible! See the video for machine operation. Fully automatic, self-adjusting knives, equipped with 11 longitudinal knives and 1 cross-cutting knife. Ideal machine for custom packaging of parts to be shipped. Machine is equipped with TPA control system, very user-friendly. Feed module for fanfold carton is present. Hsdpfx Ahsxw R Ukj Hjnw Price ex works Staphorst.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: N-0057922, input voltage: 380 V, overall weight: 800 kg, welding power (max.): 245 kVA, nominal power: 80 kW (108.77 HP), total width: 1,600 mm, total height: 1,600 mm, total length: 5,000 mm, DALEX PL 80-5 Spot Welding Machine TECHNICAL DATA & EQUIPMENT: Serial Number: N-0057922 Operating Voltage: 400 V Frequency: 50 Hz Rated Power: 80 kVA Max. Welding Power: 245 kVA Max. Short-circuit Current: 35 kA Cooling Water Flow Rate: 10 l/min Electrode Stroke: 90 mm Electrode Holder Diameter: 30 mm Incl. roller conveyors on left and right Roller Conveyor Width: 360 mm Length: 2000 mm each REFERENCE NUMBER 12 DIMENSIONS & WEIGHT: Hnsdpoxw R Tyjfx Ah How 5000 x 1600 x 1600 mm 800 kg COLLECTION NOTES: Collection of items can be arranged by appointment on a date between December 1 and December 5, 2025 FCA D-72474 Winterlingen, loaded onto truck

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, Description High-quality hydraulic shear in excellent working condition, equipped with sharp blades and a full annual maintenance history. The machine offers reliable cutting performance, strong build quality, and a wide range of productivity features suitable for demanding sheet-metal workshops. Key Features Sharp blades – ready for immediate production Annual maintenance completed Cutting strokes: 10–35 strokes/min Back gauge range: 10–1000 mm Motor power: 15 kW Programmable motorized back gauge 1.5 m side gauge 1.5 m front support Shadow line light & shadow light beam Automatic hydraulic clamps Centralized greasing system Foot switch control Cycle counter Automatic shearing contacts on back fence Blade gap and tilt angle adjustment Front flip stops Hnjdpfx Asxw R Ttoh Hew Adjustable stroke Working channel Hour meter Self-diagnosis system Control STEP AUTOMATION EASY CUT control unit for fast programming and accurate setup Technical Specifications Dimensions (L × W × H): 4600 × 2200 × 2200 mm Max. cutting thickness: 8 mm Max. cutting thickness: 6 mm Working hours: 40,347 Cutting length: 4,000 mm Machine weight: 10,100 kg Main motor power: 5.5 kW

Condition: good (used), Year of construction: 2017, operating hours: 13,864 h, functionality: fully functional, machine/vehicle number: S844W-16201A7DFECH, travel distance X-axis: 2,134 mm, travel distance Y-axis: 865 mm, travel distance Z-axis: 762 mm, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 18 m/min, controller manufacturer: HURCO, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, table width: 865 mm, table length: 2,184 mm, table load: 2,268 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 4,381 h, number of slots in tool magazine: 40, mount diameter: 40 mm, tool length: 300 mm, tool weight: 7,000 g, input voltage: 400 V, positioning accuracy: 0.001 mm, repeat accuracy: 0.005 mm, Equipment: chip conveyor, HURCO VMX 84 Swi CNC Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Connection: 50 kVA - Rated current: 72 A - Travel range A-axis: ±90° - Spindle nose to table dimensions: 147 - 909 mm - Positioning accuracy B: ±10 seconds - Repeatability B: 10 seconds - Feed rate X and Y axes: 15,200 mm/min - Feed rate Z axis: 13,500 mm/min - Rapid traverse X and Y axes: 18 m/min - Rapid traverse Z axis: 13.5 m/min - Rapid traverse B axis: 33.3 m/min - Max. tool diameter with adjacent pockets empty, tool cover removed: 75/120 mm - Tool change time: 2.5 sec - Chip-to-chip time: 21.6 sec The machine is equipped with a 3D probe, coolant system, and chip conveyor. Transport note: Hnodpfx Ahoxw R Tms Hjw Note: The machine can be transported on a low-loader with a transport width of 3,000 mm. Attention: The item must be collected on a binding appointment to be scheduled between 19 and 23.01.2026. FCA D-76571 Gaggenau – loaded onto truck.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, working width: 8,500 mm, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, empty load weight: 55,000 kg, TECHNICAL DETAILS Cutting width: 8,500 mm Cutting thickness: 8 mm Rear gauge: 1,000 mm MACHINE DETAILS Hnjdpfsxw R Tgjx Ah How Motor power: 15 kW Transport dimensions & weight Transport dimensions: 9,530 mm x 2,750 mm x 2,955 mm (plus additional parts) Machine weight: 55,000 kg EQUIPMENT Electric back gauge Documentation

Condition: like new (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, DEVICE TYPE digi test II BASIC EQUIPMENT Stand: Test Stand BS 09 with dust cover Arm: Specimen holder arm digi test II with load unit E-Box: Electronics unit digi test II - USB / RS232 interface - mini USB cable - 100-240 V, 50/60 Hz Cables: Power cord, black 10/16A, 250 V 90°, 2.0m Power plug, cold device socket black 3x0.75 Schuko plug 90° to straight cold device socket Precision for the finest details Hsdpfx Ajxw R Svsh Honw An IRHD hardness tester is the ideal solution for precise hardness testing of the smallest samples or thin layers. These specialized devices are indispensable in industries such as materials science, electronics, medical technology, or research and development, where even the smallest details play a crucial role. With an IRHD hardness tester, you can measure the hardness of materials at a microscopic level. Typical applications include the analysis of surface treatments, coatings, or the examination of microstructures in ceramics and plastics. Modern IRHD hardness testers combine maximum precision with user-friendly operation. Many models feature digital controls, allowing you to position test points precisely and analyze results directly. This technology ensures reproducible results, even during repeated measurements. An IRHD hardness tester is not only precise but also versatile. Whether in quality control, research, or the development of new materials – these devices enable you to perform your tests at the highest level. You save time and obtain reliable results.

Condition: good (used), Power supply unit, DIN rail power supply unit, switching power supply unit Hnsdoxw R Sispfx Ah Hsw -Manufacturer: Block, DIN rail power supply 24 V/DC 40A 960W -Type: PVSB 400/24-40 -Input: 400-500 VAC/50-60 Hz/2.2-1.8 A -Output: 24 V 40 A -Dimensions: 205/130/H130 mm -Weight: 3.1 kg

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: AB/222595, total width: 1,950 mm, total length: 2,300 mm, total height: 1,850 mm, empty load weight: 1,240 kg, Equipment: CE marking, MACHINE DETAILS Dimensions & Weight Hnedpfx Aoxw R R Ejh Hew Dimensions (L x W x H): 2,300 x 1,950 x 1,850 mm Unladen weight: 1,240 kg Voltage: 400 V Power consumption: 10 A EQUIPMENT CE marking

Condition: used, Year of construction: 2004, Additional title: water deaeration Capacity: 50 hl/h Hnodpfx Asxw R Rxeh How O2-contents after deaeration: 0,5 ppm Temperature: 16 °C Pressure: 4 bar Power: 1,0 kW Voltage: 380 V Frequency: 50 Hz Operation / Control: Fully automatic / Steuerung S7 Material: Frame: 1.4301, pipes: 1.4404 Features: Water line (pneumatic flap valves, flow meter, check valve, sampling valve), membrane module (water inlet from below), CO2-line (flap valve, pressure reduction valve, flow meter, manual regulation valve) Vaccum line (Flap valve, vacuum pump (ELMO), manual regulation valve), plate heat exchanger (Thermowave), pressure boosting pump (Hilge, 4,5 bar with 250 hl/h, 7,5 kW motor)

Condition: excellent (used), Year of construction: 2008, operating hours: 6,000 h, functionality: fully functional, overall weight: 372 kg, power: 11 kW (14.96 HP), For Sale: Atlas Copco GA11C 11 kW Screw Compressor (2008) Clean and reliable Atlas Copco GA11C industrial air compressor. A solid oil-injected rotary screw unit, ideal for workshops, small manufacturing facilities, and anyone needing consistent and dependable compressed air. Technical specifications (from nameplate): Model: GA11C Year of manufacture: 2008 Maximum pressure: 8.3 bar (0.83 MPa) / 120 psi Air delivery: 26.5 l/s (1.59 m³/min) – 56.1 cfm Motor power: 11 kW / 15 hp Hsdpfx Aoxw R Rrsh Henw Speed: 2940 rpm Weight: 372 kg (820 lb) Manufactured in: Belgium This unit comes from Atlas Copco’s Airpower series known for reliability, efficiency, and long service life. Its capacity and pressure level make it suitable for powering various machines and tools such as press brakes, shears, CNC machines, welding stations, and general workshop air systems. Condition: Good working condition. Runs smoothly. Operating hours can be checked on site. Ideal for: Workshops Metal fabrication shops Auto repair facilities Small production lines Secondary or backup compressor use

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 107402, spindle diameter: 40 mm, number of spindles: 4, Equipment: CE marking, TECHNICAL DETAILS Hjdpfsxw R Rlox Ah Honw Number of spindles: 4 pcs Spindle diameter: 40 mm Infeed table length: 1,780 mm MACHINE DETAILS Dimensions (L x W x H): 2,170 x 4,600 x 1,830 cm Feed motor: 5.2 kW Feed drive: Cardan drive Extraction nozzle diameter: 140 mm Voltage: 400 V EQUIPMENT CE marking Note: The machine's bearings are in poor condition.

Condition: ready for operation (used), Weiler Primus Lathe Precision Turning Machine with Accessories Weiler Primus Lathe: Center height: 125 mm Speed range: 40–3000 rpm Distance between centers: 400 mm Spindle bore: 24 mm Accessories: - 35 collets - Chuck - 4 Multifix tool holders - Accessory cabinet - Additional accessories as pictured You are welcome to arrange a viewing appointment. We can organize cost-effective shipping for you! You will receive a proper invoice. Net invoicing is possible for foreign customers provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and take a look at our other offers. Hnodpfx Ahexw R N Us Hew Specified company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: ready for operation (used), functionality: fully functional, pressing force: 400 t, stroke length: 150 mm, number of cylinders: 10, cylinder diameter: 120 mm, TECHNICAL DETAILS Maximum pressing dimensions: 1,500 x 4,400 mm Maximum stroke: 150 mm Pressing force: 400 t Hodjxw R N Ispfx Ah Henw Number of cylinders: 10 Cylinder diameter: 120 mm Material of press plates: aluminium Plate thickness: 90 mm MACHINE DETAILS Electrical data Connected load: 7.5 kW Voltage: 380 V Type of heating: Oil Dimensions & Weight Dimensions (L x W x H): 13,000 x 2,400 x 2,400 mm Weight: 25,000 kg EQUIPMENT With infeed and outfeed conveyor Heating boiler included

Condition: good (used), Year of construction: 1998, AXA VHC-3-M/K 5-Axis Universal Machining Center Year of manufacture: 1998 Control: SIEMENS 840C Machine number: 85667 Travels: Longitudinal X-axis: 1,200 mm Transverse Y-axis: 700 mm Vertical Z-axis: 800 mm B-axis: -90° to +90° C-axis: 360,000° Spindle overhaul due: 08/2025 Equipment: Swivel head -90 degrees to +90 degrees, indexed at 2.5-degree increments NC rotary table, brand SEMPUCO, 400 mm Spindle speed: 40 – 6,000 rpm / 17.2 kW 22-position tool changer Internal coolant through spindle External coolant Paper band filter Chip conveyor Hnedpfexw R Nzsx Ah Hsw Scope of delivery includes: Documentation / machine parameters on data carrier Equipment, technical data, and transport details – see PDF. Illustration, content, and information provided without guarantee and therefore non-binding. All other accessories visible in the photos and videos are not included in the scope of delivery and are thus not part of this sale. The scope of delivery only includes the accessories explicitly specified here, in the order confirmation, and on the invoice. FCA (Free Carrier – loaded on truck) D-92729 Weiherhammer Packaging only Delivery time: December 2025 Subject to prior sale / Payment due immediately upon completion of purchase

Condition: excellent (used), Column drilling machine FORMAT SB25 V-6 Drilling capacity (steel): 25 mm Chuck: 3-16 mm Taper: MK3 Speeds: 160-2340 rpm (stepless) Table size: 480x400 mm Hnsdpfjxw R Nuox Ah Hew 2 motor stages Right/left rotation Thread cutting device The machine is in impeccable condition and ready for immediate use.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, input voltage: 400 V, bale weight: 550 kg, overall weight: 2,500 kg, Used HSM V-Press 1160 Plus vertical press from 2016. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Hnjdpfx Ahsxw R Nhj How Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 04A62, cutting height (max.): 150 mm, saw blade diameter: 450 mm, cutting width (max.): 690 mm, spindle speed (max.): 3,600 rpm, TECHNICAL DETAILS Max. saw blade diameter: 450 mm Max. distance between saw blades: 550 mm Max. cutting width: 690 mm Max. cutting height: 150 mm Min. workpiece length: 2,000 mm Min. feed speed: 20 m/min Max. feed speed: 120 m/min Max. spindle speed: 3,600 rpm Hsdsxw R Nbspfx Ah Hjnw MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 2,200 x 2,150 x 2,080 mm Weight: 3,500 kg Main motor power: 30.0 kW

Condition: good (used), Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, touch screen panel, Simatic Multi Panel, touch multi panel, touch screen Hnjdpfjxw R I Rsx Ah Hjw -Manufacturer: Schneider Electric, Touchscreen Easy Panel PC, Performance 18.5" -Type: HMIPSPS952D1X01 -Voltage: DC 12-24V -Dimensions: 470/55/H295 mm -Weight: 4.5 kg

Condition: good (used), Year of construction: 2012, EiMa ALPHA T CONTURA 5-Axis Universal Machining Center Year of manufacture: 10/2012 Control system: SIEMENS 840D sI 720 NCU Machine number: 11744 Travel axes: X – 5,029 mm / Y – 1,202 mm / Z – 772 mm B-axis travel: ±121° C-axis travel: ±211° Feed rates (X/Y/Z): 60/60/40 m/min New milling spindle installed on 19.05.2025 Equipment: - 5-axis fork-type head - Milling spindle 15 kW / 12 Nm / 24,000 rpm - For milling, drilling, sawing - Disc-type tool changer, 12 tools, HSK-63 F - Pick-up station for saw blade - Spindle cooling unit - Fluidtech minimum quantity lubrication system - Partition wall for pendulum machining - Vacuum clamping plate by WITTE, 2,100 mm x 1,200 x 42 mm - Chip conveyor - Extraction unit by LOSMA NEWTON N6 Scope of delivery includes: approx. 35 tool holders / operating manual / documentation For equipment, technical data, and transport drawings – see PDF. Images, content, and specifications are provided without guarantee and are non-binding. All additional accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The delivery includes only those accessories expressly listed here, in the order confirmation, and on the invoice. Hnsdpsxw R I Dsfx Ah Hew FCA (Free Carrier, loaded truck) D-97944 Boxberg Packaging only Delivery: immediately Subject to prior sale / Payment due immediately upon conclusion of sale