M & S Energie- & Gebaeudetechnik

Condition: used, Cuts threads in 1/8" - 3" pipe at 36 rpm Constant and proper lubrication of the jaws and workpiece by oiling over the head. Suitable for use with RIDGID 916, 918, and 975 roll grooving machines Kdjdpfx Aajxn Itxsceu Pipe capacity: 1/8" - 3" 2 1/2" - 4" with optional geared die model 141 Bolt capacity: 10 mm - 52 mm up to 30 RC Spindle speed: 36 rpm Motor: 1,700 W Universal

Condition: ready for operation (used), REMS press tool, cordless press ACC Li-Ion Plus, Used machine Manufacturer: Rems Type: ACC Li-Ion Plus Overall dimensions: Width: 520 mm Ksdpsxl E Nfofx Aacjdu Depth: 290 mm Height: 120 mm Key features: Electro-hydraulic drive Pressing force: 32 kN Suitable for pipe press fittings Ø 10–108 mm (up to 110 mm in some cases) Universal motor: 1850 W Battery: Li-Ion 14.4 V / 3.0 Ah (Li-Ion Plus technology) Multifunctional electronics: soft start, overload protection, automatic retraction (ACC) 360° rotatable jaw holder Built-in LED work light Ergonomic, lightweight design: approx. 4.3 kg Condition: Used, in good working order. Accessories: battery, charger

Condition: used, Press machine, REMS Power-Press XL ACC, used equipment Manufacturer: Rems Type: Power-Press XL ACC Pressing range: Ø 10 – 108 mm (up to 110 mm) Pressing force: 32 kN Motor: 450 W universal motor Power supply: 230 V or 110 V, 50–60 Hz Weight: approx. 5.5 kg Dimensions (H x W x D): 800 x 335 x 230 mm Cable length: 2900 mm Accessories: more than 400 types of REMS pressing jaws, adapters for other manufacturers Additional features: Automatic retraction (Automatic Circuit Control – ACC) Rotatable pressing jaw holder with automatic lock Compatible with pressing jaws from other manufacturers Fast pressing, e.g., Geberit Mapress stainless steel Ø 108 mm connection in 15 seconds Kdedpexlp T Ijfx Aacou Press jaws: 76.1; 88.9; 108 mm

Condition: used, Hand Held Threader,Threading machine, Ridgid threading machine, pipe threader, pipe thread cutting machine, used machine Manufacturer: Ridgid Type: – Overall dimensions: 700 × 340 × 170 mm Ksdsxfk N Ropfx Aacedu Accessories: 1", 1 1/2", 2", 1 1/4", 1/2", 3/4", 2"

Condition: good (used), Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: Pittler, self-opening thread cutting head -Type: Model A 3 L 1018/20 Kjdoxc T Rlepfx Aacedu -Cutting jaws: not included -Bore: Ø 31/24 mm -Hole: Ø 40 mm -Dimensions: 130/125/H170 mm -Weight: 3.6 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BDG300 PV2 SP LA, Thread-Cutting/Machining Machine Oberburg – Precision Series Production Robust, fully automatic machining machine for thread cutting, cutting to length, or feed operations. Swiss quality from Oberburg Engineering (Guggisberg & Keller AG). Equipment: • Complete control with reset, start, feed • Sawing/milling module Ksdpfsw E Hfkjx Aacjdu • Chip tray, clamping system • Change gears for precise machining (Morse 5+5) Ideal for: series production, screw production, metalworking Condition: complete, well-maintained, tested

Condition: good (used), Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: PCM, tapping collet Kdedpfx Aaowzhgnjceu -Type: ET1-40 -Size: Ø12 mm -Dimensions: Ø40 x 52 mm -Weight: 0.3 kg

Condition: ready for operation (used), Ridgid 1224 Threading Machine, Thread Cutter, Used Machine Overall dimensions: Length: 1140 mm Width: 720 mm Height: 1110 mm Capabilities: Pipe threading: 1⁄4″ – 4″ (8 – 100 mm); 4″ – 6″ (100 – 150 mm) with 161 geared threading attachment. Bolt threading: 1⁄4″ – 2″ (6 – 52 mm). Features: Threads 1⁄4″ – 2″ pipe at 36 RPM and 2½″ – 4″ pipe at 12 RPM. Model 1224 is suitable for threading various types of pipes including black, galvanized, plastic-coated pipes, as well as stainless steel, IMC, and heavy-wall pipe and rod up to 30 Rockwell C hardness. Induction motor ensures noise levels remain within regulatory limits. Special capacitor start/capacitor run motor allows full-range threading even under voltage drop conditions. Uses a 1⁄4″ – 2″ universal die head and a 2½″ – 4″ adjustable die head to cut tapered or straight NPT/NPSM or BSPT/BSPP threads. Constant and proper lubrication of dies and workpieces via head-through oiling. Technical specifications: Motor: 1.1 kW, single-phase, 50 Hz, induction type. Switches: Reverse / Off / Forward heavy-duty rotary switch and integrated foot pedal. Spindle speed: 36/12 RPM. Gearbox: Two-speed transmission with 3:1 ratio. Chuck: Hammer-type with replaceable inserts. Rear centering device: Cam-operated. Pipe cutter: Model 764, fully self-adjusting and self-centering, with 1⁄4″ – 4″ F-229 cutting wheel. Reamer: Model 744, bladed type, 1⁄4″ – 4″. Kdedpfx Aaowwgvyecsu Lubrication: Through the die head. Pump: Self-priming, gear-type, automatic reversing, with constant flow.

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, thread cutting machine type 535 -Pipe size: 1/8 to 2 inches Kodpfxowub Eks Aacsdu -Spindle bore: Ø 64 mm -Operating voltage: 230 volts -Dimensions: 1080/700/H1140 mm -Weight: 128 kg

Condition: used, Year of construction: 1978, Gewinde-Ø 52 mm threading length 500 mm Kdodpfx Aaewt T Uhscju thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with pneumatic workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition.

Condition: good (used), Thread cutting machine, pipe thread cutter, thread cutting head, thread cutting chuck, thread chuck, thread cutting apparatus -Manufacturer: Rems, thread cutting head -Pipe size: 2 1/2 to 4 inches -Spindle bore: dimensions see pictures -Dimensions: 410/400/H340 mm Kdodpfxowq Nvij Aaceu -Weight: 50 kg

Condition: good (used), Thread cutting machine, pipe thread cutter Kdjdpfjwq Nhxox Aacju -Manufacturer: Rems, thread cutting machine type Combi -Pipe size: 1/4 to 2 inches -Spindle bore: Ø 40 mm -Operating voltage: 220 volts -Dimensions: 1400/1100/H1160 mm -Transport dimensions: 1200/510/H620 mm -Weight: 100 kg

Condition: good (used), Quick-action clamping device, quick-action clamp, quick-action vice, drilling device, machine vice, drilling machine vice, clamping sleeve, collet -Thread cutting head: self-opening thread cutting head -Type: CH7-44 -Image: M48 Kjdpfxov Uw Amj Aacsdu -Collet: Ø 25 mm -Dimensions: 330/210/H135 mm -Weight: 17.4 kg

Condition: good (used), Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head, thread cutting chuck -Manufacturer: Efem, thread cutting head thread cutter four-jaw chuck type G3 -Cutting jaws: not included -Bore: Ø 27 mm -Hole: Ø 40 mm -Dimensions: 160/130/H175 mm -Weight: 3.8 kg Kodpfxsv T Ufcj Aacsdu

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily Kedev T Truopfx Aacsdu clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: used, Year of construction: 1968, Gewinde-Ø 52 mm threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with driven workpiece clamping, Ksdpfx Aev N N Sceacsdu • threading head Z 52, • cooling device, • 2 sets of chaser holder, size: Z52/2B, + 21B • 5 sets of chaser jaws, pitch 1 - 2,5 mm Machine is in a good condition.

Condition: used, Year of construction: 1998, thread dia. 72 mm threading length 200 mm bolt thread from 6 - 72 mm Kdsdpsv Irh Rsfx Aacsu bolt thread from 1/16 - 2 3/4 " inch thread 1/4 - 2 3/4 - 1/16 -2 1/2 " cutting head turning speed 35 + 70 U/min tube thread 16-63 mm tube thread 1/16 - 2 1/2 " total power requirement 2000/2300 Watt weight of the machine ca. 227 kg dimensions of the machine ca. 1,2 x 0,6 x 1,2 m The "REMS Unimat 75" thread cutting machine is a semi-automatic high-performance machine for the efficient cutting of bolt and pipe threads. Working principle: stationary material - rotating head, manual, self-centering vice, pole-changing motor, automatic lubrication cooling, drive via robust planetary gear, right + left running, thread cutting head for chaser cutting jaws. According to the previous owner, the chaser cutting jaws can be regrinded. Enclosed is a 2 x 1 m floor tray which is placed under the machine with 2 grids. The year of construction is estimated. The machine was overhauled by Rems in around 2015 and was hardly used after that because the external threads were produced on other machines. Since then the machine has been in storage and has now been sold. Please note: New price today € 26,000.00. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, SPECIFICATION MODEL HK-40 ROLLING FORCE(KN) 10-400 SPEED RANGE(RPM) 17-53 MAX. DIE LENGTH(MM) 230 WORKPIECE DIA(MM) Ø4-Ø120 MAIN ENGINE(KW) 18 TOTAL POWER(KW) 21.3 MIN MAX TOOL DIA(MM) Ø160-Ø210 DIE SPINDLE DIA(MM) Ø69,85(Ø80 OPT.) MAX PITCH(MM) 7 SWIVEL ANGLE ±12 WEIGHT(KG) 4800 Ksdpfov Iapiox Aacsdu

Condition: good (used), thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: PCM, tapping collet -Type: ET1-32 -Size: Ø 10 mm -Delivery/Price: complete -Dimensions: Ø32 x 44 mm -Weight: 0.2 kg Kjdpfx Aovv Up Hoacedu

Condition: good (used), thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: PCM, tapping pliers 4 pieces -Type: ET1-40 Kedpfevv Ufbox Aacsdu -Size: 1x Ø9 mm / 2x Ø10 mm / 1x Ø12 mm -Delivery/Price: complete -Transport dimensions: 80/80/H52 mm -Weight: 1.2 kg

Condition: good (used), thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus Kdodpfxsvv S I Ts Aacou -Thread cutting head: self-opening thread cutting head -Type: Model A3 -Shaft: Ø 40 mm -Dimensions: 118/12/H170 mm -Weight: 3.7 kg

Condition: good (used), Thread cutting head with chaser jaws, pipe thread cutter, thread cutting stock, hand thread cutting stock, thread cutting stock, cutting stock set, ratchet thread cutting stock -Manufacturer: LUX, Hand Thread Cutting Stock Set 541 424 -Cutting stocks: R1/2", R3/4", R1", R1 1/4", 1 ratchet lever Ksdpfovmhfpox Aacsdu -Transport case -Dimensions case: 360/340/H100 mm -Weight: 5.4 kg

Condition: good (used), Year of construction: 1990, Thread cutting machines with accessories Kedpfxsvk D Rpe Aacsdu Manufacturer SONE Type: 2000 . 230V .

Condition: excellent (used), ROLLER THREADING MACHINE KING2 SET C R1/2-2. Threading machine, electric Design: sturdy, maintenance-free gearbox with special ratio for perfect power transmission, left/right handed, with thermal overload protection and emergency stop. Self-reinforcing clamping effect by diagonal adjustment of the clamping screw. Stable torque support for torque support in both directions of rotation. Easy and quick replacement of cutting heads. Unique locking of the cutting head in the ratchet lever, guaranteeing secure seating during threading. Supplied with Central cutting heads and carrying case. Ksdpjvgng Hsfx Aacedu

Condition: used, thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Alfred H. Schütte, self-opening thread cutting head with quick-change turning tool holder -Type: SH 3/4" -Shaft: Ø 40 mm Kedpfeu S Tcfjx Aacjdu -Dimensions: 265/130/H160 mm -Weight: 7.1 kg