Tecnomasz Zbigniew Choromański

Condition: good (used), Hang 150 Double-Head Riveter for Binders Manufacturer: Hang Germany Machine has been overhauled and is ready to use. The machine is used for riveting all types of ring mechanisms. Two riveting heads with adjustable spacing. Phjdpfx Asx N I Tdsa Eea Cardboard thickness: 0.2-4mm Throat depth: 310mm Head spacing: adjustable from 35-440mm Cycle time: 0.5s Weight: 570kg Power supply: 380V The cycle is initiated by a foot pedal.

Condition: good (used), MURO ​​5000 A3 WT Bookbinding Press for Gluing Blocks The machine is in perfect condition. Large-format gluing, fast operation. This is an original, top-quality product. Podpfox N I S Tsx Aa Eeha Manufactured by Muro, Germany. The machine is equipped with two independent dryers to accelerate the gluing process and two heating power settings. Wheeled design. 230V or 380V power supply

Condition: good (used), Renz Punch 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 perforation tool (4x4mm square) and a hanger cutting module. Manufacturer’s description: Perforation machine with a working width of up to 700 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (4.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a hanger cutout Phsdpfjx N I Smjx Aa Eea Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. The machine operates on a 3-phase, 380V power supply. Weight: 325 kg

Condition: good (used), Renz Punch 500 perforator with base This machine is in very good condition. The set includes a base for the machine. Pedpfx Aajx N I Rvj Eoha Electric drive, foot pedal control. The set includes a 3:1 perforation tool for a 4×4 hole, along with a cutout for a hanging hook. Manufacturer’s description: Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Foot pedal-operated operation Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Ability to use strips with or without a suspension slot Ability to use QSA strips (quick format change by disabling selected needles without having to remove the strip) Ability to use two-piece strips – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) Machine operates on a 3-phase power supply Weight: 120 kg + 50 kg base.

Condition: good (used), Tranklein BRM 500 Book block rounding machine The machine is in very good condition, fully serviced and ready to use. Pedpjx N I Inefx Aa Ejha Model with electric book thickness adjustment. Technical specifications: Maximum working size: 500mm Maximum book thickness: 120mm Speed: 300 cycles/h Power supply: 400V Weight: 300kg Easy to use, quick to set up.

Condition: good (used), Renz Punch 500 Perforator This device is in very good condition. New model with adjustable controls. Electric drive, foot pedal control. The set includes a 3:1 perforation tool, a 4x4mm hole, and a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Foot pedal-operated operation Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a suspension slot Available with QSA slots (quick format change by disabling selected needles without removing the slot) Pedpfxox N I Ibj Aa Esha Available with two-piece slots – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) 3-phase powered Weight: 120 kg

Condition: good (used), Kolbus ECK 100 Automatic Corner Cutter Made in Germany, Kolbus GmbH & Co. KG. Very good condition. This is a professional, production-grade device for trimming corners for hardcover binding. The robust construction ensures precise operation. Interchangeable blades. Phjdpfx Aox N I H Dea Eoa Adjustable margins. One set of blades is included. Compressed air powered.

Condition: good (used), Karl Krause Large Bookbinding Press with Tapping Block The machine is fully operational and ready for operation. Manufactured by Karl Krause, Germany. The press has a tapping block that increases the pressing force. Pressure: 5 tons Pjdpfx Ajx N I Hwsa Eeha Plate dimensions: 550 x 490 mm

Condition: good (used), Schmedt PräLeg HHS 1805 Case in machine This machine is in very good condition. Manufactured by Schmedt, Germany. The machine suspends book blocks into pre-cut hardcovers. Two gluers with smooth glue thickness adjustment. The machine comes with full documentation and a CE certificate. Podpfjx N I E Tex Aa Eeha Format: Block height: 80–340 mm Block width: 110–450 mm Block thickness: 2–80 mm Capacity: approximately 200–300 pcs/h Power supply: 230V + compressed air. Weight: 300 kg

Condition: good (used), Renz Autopunch AP 360 V4 Automatic Perforator The machine is in very good condition. Fully automatic format setting via the touchscreen monitor. Includes a 4x4mm perforation tool with a cutout for the hanger. Two-module tool. Manufacturer’s description: Perforation device with a working width of up to 360 mm. Designed for continuous operation and heavy loads. The unique „Two-finger” system ensures perfect reception of sheets of varying weights. Two-shelf platen feeder enables continuous operation. After perforation, the sheets rotate around a special drum, maintaining the correct page sequence at the receiving station. Option to use two-piece perforation strips, enabling the perforation of both books and calendars. Perforation up to 2.4mm in a single cycle. Quick and easy replacement of perforation strips. Option to use perforation strips with or without a cutout for the hanger. Quick format changes by disabling selected needles without having to remove the bar. A jogging device is located on the delivery. 230V power supply Weight: 720 kg Phjdpfjx N D Uksx Aa Eea

Condition: good (used), Weber RSM 600 Index Cutting Machine Pjdpfx Aex N D T Hsa Ejha Machine in very good condition, ready for production. This machine cuts registers from finished bindings and loose sheets. Manufacturer’s description: Automatic cutting by activating two manual buttons. Interchangeable knife shapes. Material holding pressure. Capable of cutting large stacks of material in a single pass. Safety guards ensure safety. 380V power supply + compressed air. Stack height for a single cut is approximately 30mm. Approximate dimensions: 120x120x180cm, weight: 900kg.

Condition: good (used), Bookbinding Press 50×40 with Base The machine is fully operational and ready for use. Format: 500×400 mm Pressure: 5 tons Phsdjx N D Tyspfx Aa Esa

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc. Pedpfx Aaox N D Spe Eoha

Condition: good (used), Karl Krause Hot Stamping press Manufactured by Karl Krause, Germany, The machine is fully operational, after modernization of the control system. The work table is moveable. The device was purchased from a school workshop and has not been used in production. Power supply: 230V Heating plate size: 400x275mm. Weight: approx. 600kg. Pedox N Dxvepfx Aa Ejha

Condition: good (used), Karl Tranklein Z.P. Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Two independent stations. Irreplaceable in bookbinding for the production of books, blocks, etc. Phedpex N Dwlefx Aa Eoa

Condition: good (used), Year of construction: 2005, Brand: CMC ITALIA Model: HSV 70-20 Year of manufacture: 2005 Automatic lining and laminating line - Automatic gluing machine Heliomat - Carton Spotter - Glue viscosity mixer 1) HELIOMAT HLM75 Gluing Format: 75 x 115 cm, high-pile feeder Paper size: 70 x 110 cm (max.) | 10 x 15 cm (min.) Mechanical speed: 20 pcs/min Machine control and adjustment via computer or manual operation of main functions. Servo drive for speed and precision Electronic speed regulation Glue recirculation Option includes glue mixer and viscometer Detachable feeder for easy cleaning of the gluing unit Continuous paper feeder Standard conveyor belt 1.5 m Paper detection via photocell Reduced maintenance and cleaning times Quick setups Power supply: 7 kW Weight: 820 kg 2) SPOTTER SPT110 Carton feeder Format: 70 × 110 cm, with external pre-loading Automatic positioning via photocells for 1 to 5 sheets of carton on glued paper Easy and fast format changeover Carton thickness: 0.5 to 4 mm Carton format: max. 70 x 110 cm, min. 15 x 20 cm Mechanical speed: 20 pcs/min Phodpjx Npb Nsfx Aa Esa Included: loading hopper with original ramp. 3) VIRGO 70 Casemaker Format: 70 × 110 cm, 4-side version Automatic folding from all four sides High precision and power folding on all four sides Easily calendered filling Output data on delivery table Calendar cycle for cover page and edge-to-edge gluing Carton thickness: 1.5 to 4 mm Carton format: max. 70 x 110 cm, min. 14 x 16 cm Mechanical speed: 20 pcs/min Power supply: 3 kW Weight: 960 kg

Condition: excellent (used), Year of construction: 2001, Ref:11046 . 2001 JBI James Burn BB/43H Wire-O Closing Unit Double wire booklet binder Pedpfx Aox Nfp Nsa Esha Equipped with: Hand feed area with foot operated control Auto closing unit with 2 x closing tools Fully enclosed Perspex guarding Hand feed & delivery table Specification: Product size, Max: 430 x 610 mm

Condition: excellent (used), Year of construction: 2007, Ref:11044 . 2007 Renz Autopunch AP 360 Off line machine for spiral wire punching Equipped with: Phedpfx Aaex Nfppj Esa Punch sizes: 3:1" round & square hole + thumb cut / 2:1 round hole Jogger delivery Max. format: 360 x 360 x 2.5 mm

Condition: good (used), Karl Tranklein EK-100 Corner Cutter Made in Germany. Very good condition. This is a professional, production-grade corner rounding machine. Sturdy cast iron construction and strong pressure ensure precise operation. Replaceable blades. Adjustable margins. One set of blades included. Stack height: 100mm Phsdpfx Aajx Nc Aae Eea Weight: 130kg Cycles per minute: 50 cycles/min Power supply: 400V Waste is collected in containers. This is the model currently in production.

Condition: good (used), Karl Tranklein PS1200 Bookbinding Shears Made in Germany. Very good condition. Cutting length approx. 1200 mm Ideal for bookbinding board, corrugated cardboard, leather, and canvas. Front cutting stop with millimeter scale. Two additional sliding stops on the table. Feet-operated material clamp. Pjdpox Ncxhofx Aa Ejha High knives, in very good condition. Weighs over 400 kg

Condition: good (used), Schmedt PraForm HHS 20 Book Press Book press with groove burner. Very good condition. The machine came from a school. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 350 x 380 x 110 mm Weight: 250 kg Pjdox Ncw Rjpfx Aa Esha Power supply: 380V Flexible temperature control.

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Phedpjx Ncw Dsfx Aa Esa Power supply: 230V Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: good (used), Schmedt PraForm HHS 2100 Book Press Psdex Ncvmspfx Aa Esha Book press with groove cutter. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 400 x 520 x 100 mm Weight: 250 kg Power supply: 380V + compressed air.

Condition: used, Used press / folding sheet press Psdpfsx Nauajx Aa Eeha

Condition: used, Gluing machine for book blocks With 2 glue application rollers (double glue application in one pass) Phodpfx Aex Nad Isa Eja