Hilco

Condition: ready for operation (used), Year of construction: 2021, clamping force: 2,700 kN, overall weight: 10,700 kg, Vertical injection moulding machine manufactured in 2021. This Kloeckner Desma D 969.250 Z (S3) features a clamping force of 2700 kN and an injection volume of 500 cm³. The machine is equipped with a high-pressure injection unit and a touch-operated control system for process monitoring. If you are looking to get high-quality injection moulding capabilities, consider the Kloeckner Desma D 969.250 Z (S3) machine we have for sale. Contact us for further details. - Clamping Force: 2700 kN (300 US tons)- Injection Volume: 500 cm³- Injection Unit Type: B500HP (High Pressure)- Injection Pressure: 3500 bar- Nozzle Contact Force: 58 kN- Control System: 2030 TBM (Touch operation / process monitoring)- Operating System Status: Active 3,360 hours- Operating Hours (Hydraulic Motor): approx. 730 hours- Operating Hours (Hydraulic Pump - Clamping Force): 65 hours- Total Current: 138 A- Recommended Backup Fuse: 160 A- Supply Cable Cross-Section: 70 mm² Cu- Voltage: 3~400 V +N +PE- Frequency: 50 Hz- Max. Short-Circuit Current: 10 kA- Total Machine Weight: approx. 10.7 t (10,700 kg) (Clamping Unit + Hydraulic Unit: 9,700 kg; Injection Unit: 1,000 kg)- Footprint: 10 m²- Total Floor Load / Ceiling Load: 1,070 kg/m²- Foot Area / Floor Contact Area: 2,010 cm²- Specific Ceiling Load: 5.3 kg/cm²- Hydraulic Oil Tank Volume: 450/130 l- Temperature Control Medium Tank Volume: 2x7 l- Compressed Air Pressure: 6 bar- Compressed Air Flow: 0.5 m³/h- Cooling Water Flow: 1.6 m³/h- Cooling Water Inlet Temperature: max. 20 °C at 2.5 bar- Cooling Water Connection: 22-L- Pump Power / Rated Power: 22 kW (28.6 hp)- Pump Current Consumption: 32.0 A- Pump Pressure: 265 bar- Pump Flow Rate: 72/39 l/min- Maximum Mold Width: 560 mm- Maximum Mold Length: 780 mm- Platen / Stroke Dimensions: 600 mm stroke, platen distance 1480 mm, clamping stroke details 710 mm- Heating Plate Center Bore / Ring Size: Ø80 H9- Enclosure Type (UL): 1 Ljdpfxo Ad Inlj Akweah

Condition: used, Year of construction: 2003, screw diameter: 80 mm, clearance between the columns: 800,710 mm, injection pressure: 1,855 bar, injection weight: 1,600 g, mold height (min.): 380 mm, ejector force: 90,000 N, ejector stroke: 230 mm, plate length: 1,200 mm, plate width: 1,100 mm, total length: 8,400 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, Demag Ergotech 420/800-3300 system Year of manufacture: 2003 Control system: NC4 Injection unit 3300 - Screw diameter: 80 mm - Specific injection pressure: 1855 bar - Injection volume: 1779 cc - Injection shot weight: 1600 g - Cylinder heating band power: 31 kW - Screw L/D ratio: 20 Tool clamping unit 4200 - Clamping force: 420 t Ljdpfj Adpt Asx Akwsah - Tool plate dimensions: 1200 x 1100 mm - Daylight between columns: 800 x 710 mm - Ejector force: 90 kN - Tool height: 380 mm - Opening stroke: 710 mm - Maximum distance between platens: 1530 mm - Ejector stroke: 230 mm Electrical connection (fuse rating): 760 A Weight: 21000 kg Dimensions (m) length x width x height: 8.4 x 2.2 x 2.5 m

Condition: good (used), Year of construction: 2005, Demag Extra 130-430 Lsde Acdnrjpfx Akwsah Closing force: 130 tons Year of manufacture: 2005 Control system: CDAIS Die space: 47.5 x 47.5 Scrow: 40 mm Displacement: 231 cm3

Condition: used, A Demag all-electric injection molding machine with Wittmann 3-axis robot and safety enclosure is offered. Clamping force: 1500kN, locking force: 1650kN, max. mold opening stroke: 495mm, min./max. mold height: 275mm/585mm, max. distance between mold platens: 1080mm, mold platens X/Y: 770mm/770mm, clear distance between tie bars X/Y: 520mm/520mm, max. mold weight: 1700kg, max. mold weight on the movable mold platen: 1150kg, ejector stroke: 125mm, ejector force: 35kN, ejector retraction force: 35kN, screw diameter: 35mm, L/D ratio: 20, max. injection pressure: 2430bar, stroke volume: 166cm³, shot weight: 146g, max. metering stroke: 173mm, max. nozzle stroke: 400mm, nozzle immersion depth: 20mm, nozzle contact force: 30kN, installed barrel heating capacity: 9.4kW, material hopper capacity: 35l, control: CDIAS, operating hours: approx. 76000h, machine weight: approx. 7400kg. Including WITTMANN 3-axis robot, year of manufacture: 2006, travel X/Y/Z: 550mm/1200mm/2000mm, robot weight: approx. 240kg as well as safety enclosure and 1x core pull preparation AS. Documentation available. An on-site inspection is possible. Ledpfx Akj Aa Alwsweah

Condition: good (used), Manufacturer: DEMAG Year of manufacture: 1995 Machine number: 878-0140 Operating hours: h Type: Ergotech 250-1450 system Control system: NC4 Screw diameter: 60 mm Displacement: 763 cm³ Injection weight: 690 g Injection pressure: 1,905 bar Clamping unit: Clamping force: 250 t Holding force: 275 t Opening stroke: 675 mm Minimum/maximum tool mounting height: 330 / 710 mm Laodpfe Aaz Tajx Akwsh Ejector stroke: 200 mm Ejector plate dimensions: 950 x 950 mm Tie bar spacing: 630 x 630 mm Plate distance: 1,385 mm Condition: good, ready for operation Equipment: 4 core pulls Handling: Robot System DR 322 Travel ranges x – y – z: 800 x 1,600 x 3,000 mm Heater connection: 27 kW Screw drive connection: 35 kW Weight: 13.5 t Dimensions: 6,400 x 1,900 x 2,300 mm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: QN.127018, Used plastic injection molding machine Manufacturer: SYNERGI - NETSTAL Maschinen AG Type: SYN 2400-900 Year of manufacture: 2002 Ledpfj Aazliex Akwoah Machine No.: 127018 Equipped with Wittmann W633-643 handling system.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 2,100 kN, screw diameter: 50 mm, clearance between the columns: 580,580 mm, injection weight: 402 g, opening stroke: 690 mm, installation height: 340 mm, Incl. Geiger robot Midiliner F 10.0 year 2011, Conveyor and safety cage Ledo Aarbbjpfx Akwjah

Condition: used, Year of construction: 2011, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, injection pressure: 1,914 bar, injection weight: 294 g, mold height (min.): 275 mm, ejector force: 59,000 N, ejector stroke: 160 mm, total length: 5,410 mm, total width: 1,660 mm, total height: 2,140 mm, overall weight: 7,090 kg, Used Sumitomo (SHI) Demag Systec 160/520-600 injection molding machine, manufactured in 2011. Technical specifications: - Clamping force: 160 t (1600 kN) - Injection unit: 600 - Screw diameter: 45 mm, L/D 20 - Specific injection pressure: 1914 bar - Injection volume: 323 cc - Injection shot weight: 294 g - Cylinder heater power: 11.3 kW - Tool plate dimensions: 770 x 770 mm - Distance between columns: 520 x 520 mm - Tool height (min.): 275 mm - Opening stroke: 500 mm - Maximum distance between plates: 1085 mm - Ejector force: 59 kN - Ejector stroke: 160 mm - Weight: 7090 kg - Dimensions (L x W x H): 5.41 x 1.66 x 2.14 m - Control system: NC5 Equipment: - NC5 control system with color screen - Screw Ø 45 mm, L/D 20 - 5-zone hot runner control - Air blow valve on the moving platen - Clamping force adjustment - Active mold protection (activeProtect) - Demag robot interface - WC5 remote service - Process data logging and statistics Ledpoz T Iufofx Akwoah - Reinforced oil cooler

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Lajdpfx Ajz Tzzrskweh Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Laodpfxez Tzy Uj Akwsh Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2020, KRAUSSMAFFEI KM 201-380 PX electric injection molding machine Year of manufacture: 2020 Operating hours: 21,849 h Clamping force: 2,000 kN (200 tons) Control system: MC6 Drive system: servo-electric with servo-hydraulic components Machine characteristics • Five-point, double toggle mechanism for the clamping unit, three-platen design. • Servo-electric drive for the clamping unit. • Servo-electric drive for injection and plasticizing. • Servo-hydraulic drive for the injection unit movement. • MC6 control system based on an industrial computer with real-time Ethernet communication. • Plasticizing unit for thermoplastics with a 40 mm diameter screw. Clamping unit Parameter Value Clamping force 2,000 kN (200 t) Mold opening force 300 kN Mounting plate dimensions (H × V) 870 × 820 mm Distance between columns (H × V) 635 × 585 mm Mold opening stroke 500 mm Minimum mold height 250 mm Maximum mold height 550 mm Maximum plate clearance 1,050 mm Ejector stroke 200 mm Ejector force forward / backward 39 / 19 kN Ejector speed 350 mm/s Injection unit Parameter Value Screw diameter 40 mm L/D ratio 20:1 Maximum injection pressure 1,860 bar Injection volume 201 cm³ Injection shot weight 183 g Injection speed 125 mm/s Injection rate 157 cm³/s Maximum screw speed 334 rpm Plasticizing rate 24.7 g/s Screw torque 337 Nm Nozzle clamping force 34 kN Nozzle radius 10 mm Nozzle orifice diameter 4 mm Electrical and hydraulic parameters Parameter Value Connected load 13.8 kW Electrical protection 63 A Laedpfxez Sznce Akweh Installed heater power 11.5 kW Number of cylinder heating zones 5 Dry cycle time according to EUROMAP 6 2.0 s / 445 mm Oil tank capacity 200 l Weight and dimensions Parameter Value Net weight with control cabinet 14,300 kg Machine length 6,120 mm Machine width 2,170 mm Machine height 2,210 mm

Condition: excellent (used), Year of construction: 2017, clamping force: 3,000 kN, Equipment: documentation/manual, Clamping force: 300 t Screw diameter: 55 mm Shot weight: 510 g Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Platen size: 1040x1040 mm Shot volume: 558 cm3 Mould min: 400 mm Lasdpfx Akez R Rggjwsh Type: Horizontal Drive: Hydraulic 2 core pullers Linear robot Tecnomatic compact conveyor

Condition: excellent (used), Year of construction: 2016, clamping force: 3,000 kN, Equipment: documentation/manual, Clamping force: 300 t Screw diameter: 60 mm Shot weight: 510g/PS Min Mould: 400mm Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Type: Horizontal Drive: Hydraulic 2 hydraulic Cores Laodsz R Rfvepfx Akweh Arburg Robot Multilift Conveyor

Condition: as good as new (ex-display), Year of construction: 2026, SHIBAURA EC 450 SXIII-26AT ELECTRIC INJECTION MOLDING MACHINE Year of manufacture: 2026 Manufacturer: SHIBAURA MACHINE CO., LTD. – Japan Model: EC 450 SXIII-26AT Machine type: Fully electric injection molding machine Clamping force: 450 tons (4500 kN) Location: Wrocław, Poland Availability: Machine available for immediate delivery, viewing possible at the PIMM showroom CLAMPING UNIT Clamping force: 450 tons (4500 kN) Column spacing (H × V): 870 × 810 mm Platen dimensions (H × V): 1230 × 1160 mm Mold opening stroke: 800 mm Maximum daylight between platens: 1800 mm Minimum mold height: 350 mm Maximum mold height: 1000 mm Ejector force: 127 kN Ejector stroke: 180 mm i26 INJECTION UNIT Screw diameter: 70 mm Injection volume: 1340 cm³ Injection weight (PS): 1230 g Injection weight (PE): 980 g Injection pressure: 190 MPa (1900 bar) Injection speed: 160 mm/s Injection rate: 615 cm³/s Plasticizing rate (PS): 260 kg/h Screw torque: 2580 Nm Nozzle closing force: 44.1 kN MACHINE WEIGHT AND DIMENSIONS Machine weight: 22,500 kg Machine length: 8100 mm Machine width: 2200 mm Lodpfx Aoz Rldxokweah Machine height: 2300 mm COMMERCIAL DESCRIPTION We offer a fully electric SHIBAURA EC 450 SXIII-26AT injection molding machine, manufactured by the renowned Japanese manufacturer SHIBAURA MACHINE. The machine utilizes advanced electric drive technology, ensuring high precision, repeatability of the injection process, and the ability to reduce energy consumption compared to traditional hydraulic solutions. The injection molding machine is available in our showroom in Wrocław, where you can view it and learn about its technical capabilities. We also offer comprehensive support for transportation, installation, commissioning, and operator training. Machine available for immediate delivery. We invite you to contact us and arrange a viewing.

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Sumitomo DEMAG Systec 170/520-600 NC 5 Year of manufacture: 2008 Control system: NC 5 Screw: 45mm Injection volume: 323ccm / 294g Clamping force: 1700KN Tie-bar spacing: 520mm x 520mm Mold height: min 275mm - max 585mm Maximum plate spacing: 1085mm Opening stroke: 500mm Ejector stroke: 160mm Core pull: 2x Pneumatic valve: 1x Equipment: Laedpfjz Rkmfex Akweh Core pull, 2-circuit, serial to tool movement on the movable platen Pneumatic valve 5/2, No. 1, on the movable tool platen Ejector parallel to the tool movement Clamping force controlled Freely programmable inputs/outputs (3 inputs/3 outputs) 3 in/3 out, freely programmable Start/stop program (with purging) Interface for handling, Euromap 67 (50-pin) Interface for tool protection (ejector plate safeguard) Plug-in ejector plate safeguard Integrated hot runner control, 8 zones Tool protection Switch-off of tool cooling Closed-loop clamping force control Active mold protection via sensor Hydraulic screw drive, high speed Temperature control of cooling feed zone Follow-up pressure switchover WID 1 circuit Back pressure programmable Injection via DFE pump, speed closed-loop Intrusion Reduced nozzle sealing force at open mold, programmable Process data recording (PDE) with graphics and control Extended storage for process/mold data and report lists on internal memory Program for storing process data on external memory Switch-on/off program with purging Flexible clamping sequence with ejector and cores Amendment report Event history Help function, integrated hints via control Detailed hints via control Preventive maintenance program 2 freely programmable screens Intrusion 2x socket combination 380V, 230V Printer Change journal PDE control, graphics ERGOStart The machine is currently being overhauled and tested for functionality.

Condition: excellent (used), Year of construction: 2016, operating hours: 38,950 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, Clamping force 1600 kN Mould opening force, max. 240 kN Laodpfxoz N E Egj Akwjh Size of mould platens (h x v) 930 x 860 mm Distance between tie bars (h x v) 630 x 520 mm Mould opening stroke 450 mm Mould height min/max 300 / 550 mm Max. daylight 1000 mm Hydraulic ejector - stroke 150 mm Ejector force 22 kN Injection unit: Screw diameter 25 mm Ls/D ratio 26 Injection pressure 2500 bar Stroke volume 59 ccm Shot weight (PS) 53,7 gr. Injection rate 147 ccm/s Screw speed 477 1/min Plasticising rate max. 12 g/s Nozzle pressure 30 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 28 kW Installed heating capacity 8,1 kW Adjustable barrel heating zones 5 Dimensions and weights: Dimensions of the machine ca. 6,00 x 2,00 x 2,20 m Total machine weight 13200 kg Max. mould weight 1900 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LRX 100 X: 550 mm Y: 1200 mm Z: 2000 mm C: 0 - 90 ° Additional Options: - 2 x Air valve - 5 x core pulls, Software only - 12 x hotrunner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2007, operating hours: 38,500 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/50 TECH Baujahr: 2007 Schließkraft: 50 Tonnen Holmabstand: HOLMLOS Lsdpfx Aksz Nxilswoah Schnecken DN: 30 mm Spritzteilgewicht 70 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug hydraulisch

Condition: excellent (used), Year of construction: 2013, Clamping force: 130 t Screw diameter: 40 mm Shot weight: 184 g Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Shot volume: 201 cm3 Type: Horizontal Drive: Hydraulic Laedjz Nw H Nspfx Akwoh Hours: 21229 h

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1,0 ST. Gebr. Zwei Komponenten Spritzgiessmaschine das zweite Aggegeat ist seitlich angebau Hersteller: NETSTAL Typ: SYNERGY 1750-900-230 Baujahr: 2016 Lodpfxsz Nmi Hs Akwjah Schließkraft: 175 Tonnen Holmabstand: 510 x 510 mm Schneckendurchmesser 1: 50 mm Spritzteilgewicht 1: 377 g/PS Schneckendurchmesser 2: 25 mm Spritzteilgewicht 2: 47 g/PS Ausstattung: Kernzüge 2 x DS / 1 x AS Zweites Aggregat ist seitlich angebaut Roboter Wittmann, Baujahr: 2016

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1,0 ST. Gebr. Zwei Komponenten Spritzgiessmaschine das zweite Aggegeat ist seitlich angebaut. Hersteller: NETSTAL Typ: SYNERGY1700 - 110 Baujahr: 2004 Schließkraft: 240 Tonnen Holmabstand: 630 x 630 mm Schneckendurchmesser 1: 70 mm Spritzteilgewicht 1: 916 g/PS Schneckendurchmesser 2: 28 mm Spritzteilgewicht 2: 59 g/PS Lajdoz Niz Sspfx Akwsh Ausstattung: Kernzüge 2 x DS / 1 x AS Zweites Aggregat ist seitlich angebaut

Condition: excellent (used), Year of construction: 2009, operating hours: 44,561 h, functionality: fully functional, machine/vehicle number: 173072, clamping force: 3,000 kN, screw diameter: 55 mm, Equipment: documentation/manual, Here, as a dealer of injection molding machines, we offer the following well-maintained used injection molding machine: Of course, we also purchase well-maintained injection molding machines from model year 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Engel Type: VC 1350/300 spex plus Viper 12 Robot Serial number: 173072 Year of manufacture: 2009 Operating hours: 44,561 h Control system: CC200 Fully functional Condition: very well maintained Machine comes from a German first owner Extras: - Handling system Viper12 (z-axis 2240 mm, x-axis 600 mm, y-axis 1200 mm) - Core puller: 1x - Mounting plate, vertically enlarged - Mounting plate, standard centering 160 mm - Approved for use up to 350°C - Nozzle control, 1-fold hydraulic - Injection unit, swiveling - Screw S8, highly hardened, wear-resistant / for thermoplastics - Screw length L/D20 - Hydraulic system HV1 for sequential motion sequence - Interface for color dosing - 4 sockets 10A/16A, mold closing side - Interface for ejector locking - Interface for potential-free contacts - Freely programmable, 4x digital output Injection unit: Lsdpfxoz Ng Rws Akwoah Screw diameter: 55 mm Injection weight: 570 g/shot Injection pressure: 1763 bar / increased to 2183 bar Injection volume: 618 cc Clamping unit: Clamping force: 300 tons / 3000 kN Tie bar distance: tie-barless Mounting plates: 1100 x 700 mm (h x v) Tool opening stroke: 900 mm Tool installation height: 400 mm Max. distance between platens: 1300 mm Ejector force: 90 kN Clamping unit: hydraulic Weight: 19,400 kg Dimensions: 7.06 x 2.13 x 2.45 m ✅ Available immediately from our warehouse in Hanover/Germany or delivered to your location against reimbursement of freight costs. Worldwide delivery possible. The machine is in our sole ownership. ✅ The requested machine is now available in our warehouse in Hanover and is offered after functional testing and can be inspected while powered. For information about the machines we offer and our company: - We only sell machines that we have purchased ourselves from current production and that are stored in our Hanover warehouse. - All offered machines are checked and tested before dismantling. - We do NOT sell insolvency goods. - We are NOT an intermediary that trades with third-party property. - All offered machines come from successful companies for which maintenance and care are a matter of course. - All offered machines can be inspected in our warehouse.

Condition: used, Year of construction: 2005, operating hours: 82,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, mold height (min.): 350 mm, total length: 5,320 mm, total width: 1,900 mm, total height: 2,240 mm, overall weight: 10,530 kg, Technical Specifications : Type : 200- 1000 C2 Year of construction : 2005 Clamping force : 2000 kN Size of mould platens (h x v) : 915 x 915 mm Distance between tie bars (h x v) : 560 x 560 mm Mould opening stroke : 700 mm Mould height min.: 350 mm Max. daylight : 1050 mm Hydraulic ejector - stroke : 200 mm Screw diameter : 55 mm Injection pressure : 1904 bar Stroke volume : 523 cm³ Dimensions: 5.32 x 1.90 x 2.24 m Lsdpfx Akoz I Tf Rswoah Total machine weight : 10.530 kg Max. mould weight : 2535 kg A second identical machine is also available. A special package price is offered to buyers interested in both units. Please contact us for details.

Condition: ready for operation (used), Year of construction: 2019, clamping force: 1,200 kN, total width: 2,200 mm, total height: 2,065 mm, overall weight: 8,450 kg, product length (max.): 5,259 mm, Hydraulic injection moulding machine manufactured in 2019. This Engel Victory 120 BMG features a clamping force of 120 t and a tie-bar-less design, ensuring efficient operation. It includes a high-speed injection unit and an advanced CC300 control system with a 21.5" full HD touchscreen. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 120 BMG machine we have for sale. Contact us for further details regarding this machine. • Tie-bar-less design • Machine hours: on-time 2,767 h; estimated operating time ~200 h (never used for regular series production) • Oil filling: 300 L • Power supply: 3x400 V + N + PE / 50 Hz • Control system: CC300, 21.5" full HD touchscreen • Hydraulic system: ecodrive SHV3-HSI servo-hydraulic • High-speed injection with accumulator • Oil cooler: standard Ljdpfx Aez I Nixekwoah • Injection unit size: hydraulic 200 • Platen size: standard Euromap • Mould height: increased +200 mm • Opening stroke: extended +200 mm • Ejector system: platen ejector • Core pull: hydraulic and pneumatic • Cooling water connections: machine and mould separate • Flow regulator: 0–10 l/min • e-flomo temperature control system: 4 and 6 circuits • Remote service: e-connect.24 (2 years) Additional equipment • Robot: ENGEL viper 12 RC300 • Max payload: 12 kg • Strokes: Z 1,160 mm; X 600 mm; Y 900 mm • C axis: pneumatic 0–90°, 30 Nm • Max system height: 3,600 mm • Min deposit height: 1,000 mm • Integrated conveyor belt • Belt width: 350 mm • Belt temperature resistance: up to 300 °C • Temperature control unit: HB-Therm Thermo-5 HB-160Z1 • Max temperature: 160 °C • Heating power: 8.0 kW • Pump: 0.50 kW, 30 L/min, 52 m • Cooling capacity: 30 kW @ 60 K • Vacuum pump: Pfeiffer DUO 35, 32 m³/h • Induction heating system: 50 kW, 50–200 kHz • Melting chamber: max ingot weight 100 gNo plastic extruder included!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: NETSTAL Typ: ELION1750-840PM Baujahr: 2008 Schließkraft: 175 Tonnen Holmabstand 510 x 510 mm Ljdsz I Dd Djpfx Akwjah Einbauhöhe min. /max.: 500 - 800 mm Öffnungsweg: 450 mm Schnecken DN: 55 mm Max. Hubvolumen: 457,6 cm³ Spritzteilgewicht in PS: 455,8 g Ausstattung: 2 x Kernzug

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1,0 ST. gebr. Spritzgiessmaschine mit Roboter Laodpfx Aez I Agdekwsh Hersteller: NETSTAL Typ: SYNERGY2400-900 Baujahr: 2004 Schließkraft: 240 Tonnen Holmabstand: 630 x 630 mm Schneckendurchmesser: 50 mm Spritzteilgewicht: 377g/PS Ausstattung: Kernzüge 2 x DS / 1 x AS Roboter WITTMANN