MazMac Limited

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, controller model: Fanuc 32iTB iHMI, counter spindle speed (max.): 4,500 rpm, CMZ Turning and Milling Center including GL20II Gantry Loader! TECHNICAL DETAILS Swing diameter over bed: 760 mm Swing diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Center distance: 689 mm Distance chuck to chuck: 625 mm X-axis travel: 310 mm Z-axis travel: 640 mm Y-axis travel: +70/-50 mm B-axis travel: 640 mm Rapid traverse (X/Y/Z/B): 30/30/15/30 m/min Maximum spindle speed: 3,500 rpm, ASA 8" A2 Maximum sub-spindle speed: 4,500 rpm, ASA 6" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Nedpfx Asy Hk Nijaasla Bar capacity: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Control: Fanuc 32iTB iHMI Dimensions & Weight Machine weight: 6,500 kg Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm EQUIPMENT Gantry loader

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm,

Condition: good (used), Year of construction: 2010, 660mm turning diameter, 983mm turning length, Max distance between centres 1500mm. Nsdpfx Aoy Hiibsaasla +/-210 mm Y Axis, C Axis 0.001 degrees on both spindles, 3,000rpm Spindle speed. 80mm bar capacity. Main spindle 22Kw, 12,000rpm turn mill spindle, +/-120 degrees on B axis milling spindle. Milling power 18.5Kw, 100 Station Toolchanger, Capto C6 milling spindle, hydraulic steady, coolant, Tool setter, Hobbing function to spindle 1, Mori seiki MSX-701IV control.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, chuck outer diameter: 325 mm, controller model: Fanuk Series 21I-TB, TECHNICAL DETAILS Max. turning length: 1,050 mm Turning diameter over cross slide: 350 mm Max. turning diameter: 465 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. spindle speed: 3,500 rpm Max. torque: 630 Nm Spindle bearing diameter: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Quill stroke: 150 mm Nljdpfx Asy Hg S Heaaea Rapid traverse X/Z axis: 30 m/min Number of tool turret positions: 12 Tool holder: VDI 40 MACHINE DETAILS Control: Fanuk Series 21I-TB Drive power: 33 kW

Condition: used, DOOSAN PUMA 280 – Year 2012 Nlsdpfxsy Hgwcj Aaaea Ø630 mm Swing Over Bed Ø 500 mm Swing Over Saddle Ø 420 mm Maximum Turning Diameter 658 mm Maximum Turning Length Ø 76 mm Bar Working Diameter 3500 rpm Spindle Speed 10 Tool Stations Chip Conveyor and Box

Condition: good (used), Year of construction: 2019, In good technical condition and fully functional. Year of manufacture: 2019 - Max. turning diameter: 220 mm (for standard turret) - Max. turning length: 356 mm - Chucking diameter over bed: 641 mm - Chucking diameter over cross slide: 413 mm - X/Z-axis travel: 200 / 356 mm - Rapid traverse X/Z-axis: 30.5 m/min - Spindle size: A2-5 - Max. power: 11.2 kW, spindle drive: vector drive - Max. torque: 102 Nm - Max. spindle speed: 6,000 rpm - Bar capacity (spindle bore): 44 mm - Automatic hydraulic chuck: 165 mm - 12-position tool turret VDI40 (option BOT or hybrid) - Option for driven tools and C-axis on spindle - Coolant tank: 114 l with pump - Electrical connection: 3x400 V / 50 Hz, 14 kVA - Machine weight: 3,450 kg Nljdpsy Hgvxefx Aaaea

Condition: good (used), Year of construction: 2023, CNC Multi-Axis Turning Center Make: Hyundai WIA Model: LM1800TTSY Control: Siemens 840D ShopTurn with 3D Simulation Year of Manufacture: 2023 Nledpoy Hfrlofx Aaasa Technical Specifications: Slant-bed design with box ways in X/Y axes, Z axes with linear guides Sub-spindle and twin turret system Travels: X/X1: 165 / 195 mm Z1/Z2: 700 / 720 mm ZB: 668 mm Y: 100 mm Rapid traverses: X/Y/Z: 20 / 7.5 / 40 m/min Max turning diameter: 230 mm Max turning length: 673 mm Spindle nose: A2-6 Spindle bore / bar capacity: 76 / 65 mm Spindle speed: 5,000 rpm (both spindles) Drive power: 2x 22 / 11 kW Turret & Milling Unit: 2 turrets each with 12 stations (optionally 24) System: BMT55P Milling drive: Speed: 5,000 rpm Power: 5.5 / 1.1 kW Equipment: Automatic measuring arm Coolant tank 270 liters Direct path measuring system (X1/X2, Z1/Z2, Y) Coolant temperature compensation (with air conditioning) High-pressure coolant system 20 bar Chip conveyor (belt type) Siemens network expansion Bar feeder interface Extensions & accessories Software & Electrical: ShopTurn with 3D simulation Machine transformer Measuring & Automation Technology: Automatic Renishaw Q-setter Linear positioning sensor (for main and sub-spindle) Workpiece Handling: Part catcher for main spindle Part catcher for sub-spindle with belt discharge Workpiece ejector Clamping Technology: Hainbuch Spanntop mini Main spindle (AX Pull size 65) Sub-spindle (AX Fix size 65) Peripherals: Sprint 565 S2 bar feeder by LNS For bar lengths up to 3,000 mm Diameter: 5 – 65 mm Reduction bushing set (various diameters) Extracting unit ARNO-2VF Purchase price in 2023: €330,000 The machine has seen little use and is in very good condition.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, We offer you: Manufacturer: DMG MORI Type: CLX 450 TC Year of manufacture: 2022 Control: Celos with Siemens 840D sl Operate Technical data: Max. turning diameter: 400 mm Turning length: 1,100 mm Bar capacity: max. 65 mm Travel axes: X-axis travel: 276 mm Z1-axis travel: 755 mm Z3-axis travel: 775 mm Y-axis travel: +/- 100 mm B-axis travel: +/- 120° Main spindle: Speed: 5,000 rpm Drive power: 14 / 17 kW Max. torque: 275 / 345 Nm Sub spindle: Speed: 5,000 rpm Drive power: 14 / 17 kW Max. torque: 275 / 345 Nm Milling spindle: Speed: 0 – 12,000 rpm Drive power: 8.8 / 10.5 kW Tool holder: HSK-A 63 Tool changer: 60 positions Max. torque: 73 / 90 Nm Hollow clamping device: Ø 67 mm Technical features & accessories: - Absolute, direct path measuring systems in X and Y axes - Double switch filter - DMG Mori IoT connector - Dynamic dual-pressure clamping for main and sub spindle - Three-jaw power chuck, SMW Autoblok for main and sub spindle - Tailstock function for sub spindle incl. foot switch - Hinged belt chip conveyor incl. coolant tank - Coolant system 8 / 20 bar, consisting of: - Coolant tank 600 l - Band filter system - Lift pump - Mechanical oil mist separator - Chuck flush device on main and sub spindle - Coolant supply through sub spindle - Coolant spray gun - Safety glass disc cleaning system - Workpiece probe RMP40, Renishaw - Tool measurement probe Z-Nano, Blum - MPC (Machine Protection Control) - Path measuring system for Z1-axis - Automatic working area door, electric - Electrical interface for Robo2Go, includes: - Additional compressed air connection - Additional Ethernet interface - Power supply for robot via machine - Bar machining package Ø67 mm, comprising: - Max. bar diameter Ø67 mm - Workpiece pick-up system with conveyor belt, left-side discharge for parts up to Ø80 mm x 200 mm, max. workpiece weight 6 kg - Pneumatic ejector for sub spindle Nsdoy Hfpwepfx Aaasla - Connection for bar feeder or bar magazine - Tropical package - Signal provision for operating data acquisition device - Electronic handwheel - Inputs and outputs controllable via M function - Expansion of tool data and tool corrections to 3,000 - Off-center turning and milling operations - Complete machining of shaft parts - Technology cycle for alternating spindle speed - Multi-thread cycle 2.0 - Technology cycle with dialog-guided programming - Technology cycle for parting-off Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Changes and errors in the technical data and information, as well as prior sale, reserved!

Condition: used, Year of construction: 2012, turning diameter 350 mm turning length 650 mm control 840 D SL ShopTurn Siemens greates pass round over bed 385 mm Swing dia. over traverse guideway 350 mm turning speed range - main spindle 0 - 4.500 min/-1 power capacity - main spindel 11,5 / 8 kW max. Torque 340 Nm spindle diameter in front bearing 130 mm spindle bore 87 mm bar material dia. max. 65 mm max. chucking diameter 250 mm spindle head 170 h5 number of toolpositions 12 pos. Shank diameter DIN 69880: 30 mm Number of driven toolspositions 6 pos. Spindle speed - driven tool stations max. 4.500 min -1 power capacity driven tool-stations 5,5 kW x-axis 255 mm z-axis 800 mm tailstock 680 mm taper of center MK 4 Nljdpfxjy E Tvve Aaaea clamping capacity 6,8 kN feed speeds 0 - 30.000 mm/min rapid traverse ( X / Y / Z ) 30 / - / 30 m/min Feed force ( X / Y / Z ) 4,5 / - / 6,2 kN total power requirement 28 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC Universal Lathe GILDEMEISTER - NEF 400 V3 - C-Axis - Tool-Drive - only ca. 8093h Spindle hours - incl. 1x workbench - incl. 1x tool cabinet - incl. 1x cabinet for VDI tool holders - incl. 8x tool holders - incl. 4x driven tools (2 radial, 2 axial)

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Njdey E Nz Ijpfx Aaajla Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: used, Year of construction: 2009, turning diameter: 2,000 mm, travel distance X-axis: 1,875 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 1,345 mm, rotational speed (max.): 300 rpm, rotational speed (min.): 10 rpm, CNC Vertical Multitasking Machine CNC Control Mazatrol Matrix 2 Turning diameter 2000 mm Turning speed 10-300 R/min Milling head speed 25-5000 R/Min Movement X-Y-X-axis 1875-1550-1345 mm Njdsy Ey Tbepfx Aaaela B-axis travel -30/120° C-axis indexing 360/0,0001° Tool taper Capto C8 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,093 h, functionality: fully functional, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, controller model: MITSUBISHI M-720BM (MAPPS 2), counter spindle speed (max.): 5,000 rpm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Main Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Counter Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Milling spindle speed: 0 - 12,000 rpm Tool holder: Capto C6 Tool stations: 100 positions Hollow clamping device: 67 mm MACHINE DETAILS Control unit: MITSUBISHI M-720BM (MAPPS 2) Nljdpfsy Eydyox Aaaea Operating Hours Operating hours: 26,875 h Spindle hours: 16,093 h EQUIPMENT Y-axis Fully indexable B-axis Chip conveyor, discharge right Standard coolant system Interface for high-pressure coolant system, 70 bar Tool spindle with through-spindle cooling Coolant spray gun Blow air through sub spindle Manual tool presetting on main spindle 3-color signal tower Double foot switch Simultaneous 5-axis machining Automatic power off Tool offset for 5-axis machining Programmable data input Dynamic interchange diameter/radius Stroke check prior to movement

Condition: good (used), Year of construction: 2000, functionality: fully functional, Control brand: FANUC Nlodpfxsy Eyazo Aaasa Control model: 21T Machine depth: 1850 mm Machine weight: 3000 kg Max. turning length: 450 mm Max. swing over cross slide: 310 mm Max. swing over bed: 500 mm Spindle bore: 77 mm Tool stations in turret: 12 pcs Turret traverse x / z: 200 / 450 mm Rapid traverse x / z: 24 / 30 m/min

Condition: used, Year of construction: 2005, Capacity Max turning diameter: ≈ 300 to 400 mm Max turning length: ≈ 600 to 1000 mm Swing over bed: ≈ 500 mm Spindle Spindle bore: ≈ 65 mm ← this matches the UP65 naming Chuck size: 200 to 250 mm Spindle speed: ≈ 3500 to 4500 rpm Spindle power: ≈ 15 to 22 kW Axes X travel: ≈ 200 to 250 mm Z travel: ≈ 600 to 1000 mm Rapid traverse: X: ~20 m/min Nljdpfx Aaey Ewkqoaja Z: ~24 m/min Tailstock Hydraulic tailstock Quill diameter: ~80 mm Quill stroke: ~100 to 150 mm Machine weight Around 4,500 to 6,500 kg

Condition: good (used), Year of construction: 1998, Mazak Integrex 35 turning/milling center,\nyear of manufacture: 1998,\nMazak T Plus control,\nturning length 1500 mm,\nmax. turning diameter 575 mm,\nY axis,\nb-axis steplessly swiveling,\nchain magazine for 40 tools,\nturning tool holder KM 63,\nmilling tool holder SK 40,\ntailstock,\nstead rest,\nchip conveyor,\nKitagawa three-jaw chuck B 12, Nlsdpfx Asy Ev Rpoaaja

Condition: excellent (used), Year of construction: 2012, Multicut 500i 5-axis turning center in very good condition. (X-, Z¹-, Z²-, C-, B-, Y-axis). The machine was installed in September 2014 and regularly maintained. It is a very powerful and highly precise machine. Spindle on: approx. 13,700 hours, spindle hours: 4,500 Main technical data: CNC Siemens 840D Swing diameter over bed: 1,030 mm Maximum turning diameter: 690 mm Turning length: 1,693 mm Y-axis: 370 mm Spindle bore: 106 mm Bar capacity through draw tube: 94 mm Spindle speed: 3,500 rpm Spindle motor S1/S6 40% duty cycle: 59/74 kW Milling spindle: 12,000 rpm Milling spindle power S6 40% duty cycle: 22 kW Nlodpfx Ajy Evw Aoaaoa Milling spindle mount: CAPTO C6 B-axis: -120º, +105º ATC magazine with 81 slots Linear scales in X, Z, Y Tailstock MK6, stroke 180 mm Machine dimensions (L x W x H): 5.4 x 3.86 x 3.76 m Machine weight: 22,800 kg Accessories: Forkart chuck type 3FNC with reversible hard jaws • Chip conveyor • Internal cooling through tool 60 bar • Cooling gun • Automatic tool measurement • Automatic door opening • Servo-controlled hydraulic steady rest type SMW SR 5.1 (85 to 350 mm diameter), automatic up/down movement

Condition: used, Year of construction: 2008, operating hours: 50,669 h, functionality: fully functional, turning length: 2,110 mm, turning diameter over cross slide: 725 mm, turning diameter: 570 mm, spindle motor power: 30,000 W, spindle speed (max.): 2,000 rpm, spindle bore: 132 mm, travel distance X-axis: 320 mm, travel distance Z-axis: 2,200 mm, type of input current: three-phase, bar diameter (max.): 117 mm, quill diameter: 100 mm, swing diameter over bed slide: 780 mm, overall weight: 11,000 kg, Turning-milling center – HYUNDAI KIA SKT400LMC. The machine is working and under power. The machine is equipped with a high-class hydraulic steady rest with a range of Ø30–Ø245 mm, many jaws – around 90 sets, 10 of which are brand new. Tool holders for driven tools BMT75 – 2 radial and 2 axial, many holders for static tools. Two-speed gearbox, brand “BARUFFALDI”. Automatic door! The machine is very precise and stable. Specifications: Control FANUC 21i-T Swing 725mm Bar Capacity 117mm/132mm Chuck Size 320mm - Forkardt Maximum Cutting diameter 570mm Maximum Cutting Length 2110mm Milling Motor Power 7.5/5.5kW Milling RPM 4000rpm Tailstock Body Travel 2100mm Tailstock Quill Diameter 150mm Tailstock Quill Stroke 150mm Tailstock Taper MT #5 - BUILD IN Turret Positions 12 Station Rapid Feedrates 20m/minute Spindle Motor Power 37/30kW Spindle Nose A2-11 Spindle Speed 2000rpm Tool Size 32 x 32mm Tooling Configuration BMT 75 C axis 0.001 degree X axis Travel 320mm Z axis Travel 2200mm Machine Dimensions 6340 x 2165 x 2228mm Machine Weight 11000kg Nledpey Equ Tofx Aaaja

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, number of axes: 4, This 4-axis DOOSAN LYNX 2100 LSY was manufactured in 2019. It features a Y-axis for multi-tasking operations, a 12-station turret with live tooling, and a hydraulic 3-jaw chuck. The machine is equipped with a bar feeder system, allowing for efficient serial production. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN LYNX 2100 LSY turn-mill centre we have for sale. Contact us for further details. • Main features: • Main spindle + sub-spindle • Y-axis for multi-tasking operations • 12-station turret (24 indexing positions) • Live tooling (driven tools) • Tool interface: BMT45 • Workholding/Capacity (on machine): • Hydraulic 3-jaw chuck: 170 mm • Key advantages: • Y-axis + sub-spindle → full machining capability • Live tooling → turning and milling in one setup • Bar feeder → ideal for serial production • Automated part handling → increased productivity Additional equipment • Bar feeder: Top Automazioni Fusion 350 (Ø20–50 mm, up to 3200 mm length) • Additional 3-jaw chuck: 135 mm • Collet system, capacity 5–65 mm • Chip conveyor (belt type, side discharge) • Parts catcher for sub-spindle • Oil skimmer • High-pressure coolant system (5–7 bar, 20 µm filtration) • Automatic tool measurement • Spindle and axis load monitoring system • 3-color signal light • Parts handling arm (for sub-spindle unloading) • Tooling package: • 2x straight driven tool holders • 2x angular driven tool holders • 1x extended angular holder • 1x set of turning tool holders Technical Specification Counter Spindle Yes Driven Tools Yes Njdpey Epi Ajfx Aaajla

Condition: good (used), Year of construction: 2016, Contact us for more information Nlodpey Enr Sefx Aaaoa

Condition: ready for operation (used), Year of construction: 2018, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, total height: 2,060 mm, total width: 2,800 mm, overall weight: 6,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, product length (max.): 3,450 mm, number of axes: 4, This 4-axis EMCO EMCOTURN E65 was manufactured in 2018. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and offers driven tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOTURN E65 turn-mill centre we have for sale. Contact us for further details regarding this machine. • Work area: • Swing over bed: Ø610 mm • Swing over cross slide: Ø360 mm • Distance between centers: 682 mm • Distance between spindle noses: 840 mm • Max. machining diameter: Ø500 mm • Max. machining length: 520 mm • Max. bar capacity: Ø65 mm • Main spindle (belt driven): • Torque (40% DC): 305 Nm • Spindle nose: A2-6 • Bearing Ø: 105 mm • Spindle bore: Ø73 mm • Max. chuck size: Ø250 mm • Counter spindle: • Speed: 60–5000 rpm • Power (40% DC): 11 / 16.5 kW • Torque (40% DC): 80 / 125 Nm • Spindle nose: A2-6 • Spindle bore: Ø73 mm • Max. chuck: Ø200 mm • C-axis: • Resolution: 0.001° • Rapid speed: 100 rpm • Turret (VDI30): • Tool stations: 12 • Driven tools: yes • Max. speed: 5000 rpm • Max. power: 6.7 kW • Max. torque: 25 Nm • Indexing time: 0.2 s • Rotary tools (VDI30): • Speed: 0–5000 rpm • Torque: 25 Nm • Power: 6.7 kW • Feed drives: Nlodpfx Ajy Enr Eoaaja • Rapid traverse (X/Y/Z): 30 / 15 / 30 m/min • Feed thrust X: 5000 N • Feed thrust Z: 7000 N • Acceleration: 0.4 m/s² • Tailstock: • Travel: 500 mm • Force: 8000 N • Taper: MT4 • Coolant system: • Tank capacity: 230 l • Pump power: 0.57 / 2.2 kW • Pressure: 3.5 bar (optional 14 bar) • Flow rate: 15 / 65 l/min • Hydraulic unit: • Tank: 10 l • Max. pressure: 50 bar • Pneumatics: • Pressure: 6 bar • Air consumption: 5 l/min • Power supply: • Voltage: 3x400V • Frequency: 50/60 Hz • Connected load: 25 / 39 kVA • Noise level: • Average: 75 dB(A) • Key features: • C-axis main spindle • Driven tools • Hydraulic tailstock • ShopTurn programming • USB + Ethernet • 15" touchscreen + 3D simulation • CE documentation Additional equipment • Bar feeder: EMCO SL1200 • Bar diameter: 8–95 mm • Bar length: 150–1200 mm • Feed rate: 60 m/min • Capacity: 10 bars Ø55 mm / 70 bars Ø8 mm • Weight: ~500 kg • Collet chuck: HAINBUCH BZI 100 (A2-8) • Max. capacity: Ø100 mm • Incl. part stop • Max. speed: 5000 rpm • Parts catcher: • Max. length: 175 mm • Max. diameter: 65 mm (optional 95 mm) • Max. weight: 4.5 kg • Chip conveyor: • Length: 1200 mm • Suitable for: long chips, snarled chips, dry & wet machining • Coolant pistol (Multiflow): • Adjustable jet + solenoid valve • Magnetic holder + spiral hose Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2022, operating hours: 10,014 h, functionality: fully functional, machine/vehicle number: 00340000910, turning length: 1,290 mm, turning diameter: 640 mm, spindle motor power: 46,000 W, spindle speed (max.): 2,000 rpm, spindle bore: 95 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, workpiece weight (max.): 1,200 kg, feed force X-axis: 9,500 N, feed force Z-axis: 15,500 N, Equipment: documentation/manual, Technical data in the attachment. Njdpfxjy Emx Rj Aaaela

Condition: excellent (used), Year of construction: 1998, Mazatrol T-Plus control Max. turning diameter: 470 mm Max. swing diameter: 575 mm Turning length: 1,500 mm Nlsdpfoy Ehm Aex Aaasa Spindle speed: 3,000 rpm Magazine for 40 tools (KM 63/SK 40) B-axis Y-axis Steady rest Tailstock Chip conveyor

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turn-mill spindle Full indexing specifications: Yes X-axis travel: 380 mm Y-axis travel: ±105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ±120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Nledpoy Edc Hsfx Aaaea Tool magazine Magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: Ø70/Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower Turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool stations: 10 Tool rotational speed: 6,000 min⁻¹ Driven tool power: 1.5/1.2 kW Main Spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Sub Spindle Spindle speed: 1,000 rpm BW axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang to conveyor, if equipped) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated output: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Powered on: 54,061 hours Spindle 1 operating hours: 9,813 hours Spindle 2 operating hours: 5,002 hours EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blower outside the spindle Foot switch (double) for main and sub spindle

Condition: used, Year of construction: 2007, CNC Turning and Milling Center Machine type: DMG CTX 210 V3 Control: Heidenhain CNC Pilot 4290 Year of manufacture: 2007 Available from: immediately / now TECHNICAL DATA: Max. turning length: 365 mm Turning diameter: 290 mm Max. swing diameter over bed: 380 mm C-axis Spindle speed range: 20 - 6,000 rpm Bar capacity: 56 mm Travel distances: X-axis: 160 mm Z-axis: 339 mm Number of turrets: 1 Tool holder: VDI 30 Tool stations: 12 Driven tools: 12 Tailstock Space requirements (LxWxH): 2.88 m x 1.72 m x 1.67 m Njdsy Ecuhjpfx Aaaola Machine weight: 4,200 kg Features: Operating manual / instruction manual

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, A used CNC turning and milling center Main and counter spindle C axis Nlodpfjy D Tz Nox Aaaoa Y axis Further technical data will be added.