LICO Stahl- und Kunststofftechnik GmbH

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t Codpoyhpccjfx Afnopu

Condition: excellent (used), Year of construction: 2006, Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Cpjdpfxoyhpb So Afnju Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Cpjdpfx Afjyhpbxsnou Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Csdsyhpauspfx Afnopu Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: excellent (used), Year of construction: 2008, For sale: Hydraulic through-feed press JOOS DLP 240/OK Machine type: Hydraulic through-feed press with automatic feeding and unloading of elements. Application: Designed for coating flat panel materials of uniform thickness using coating material under elevated temperature. Basic data: Manufacturer: JOOS Model: DLP 240/OK Year of manufacture: 2008 Operating voltage: 400 V / 50 Hz Power consumption: 55.5 kW Hydraulic cylinders: 8 × 125 mm + 2 × 40 mm Operating pressure: 245 bar Cpsdpoyc Euksfx Afneu Pressing surface: 4200 × 1400 mm (L × W) Total pressing force: 2400 kN Condition: very good Documentation: complete Important note: The machine does NOT have a control program. TAG: hydraulic press, through-feed press, industrial press, coating press, panel processing machine, production line equipment, industrial machinery, JOOS, Siempelkamp, Orma, Italpresse, Dieffenbacher, Bürkle, Langzauner

Year of construction: 2021, operating hours: 100 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN:40231, This Formech RP700 is a robust and easy-to-use machine from a leader in vacuum forming technology. It has seen very light use (less than 100 hours) and is perfect for high-volume processing of plastic trays and parts. The machine uses a cutting die to deliver clean, consistent results. It is currently ready to run and can be picked up or palletized for shipping. Key Features & Capabilities: Applications: Ideal for die-cutting blister packs, clam packs, and thin materials. Capacity: Handles materials up to approximately 2 mm in thickness. Sizing: Features a 700 mm (28") cutting width and a maximum roller opening of 180 mm. Power: Requires a 3-phase power supply (380V/32A). Cpjdjyb Th Nspfx Afnsu Working Width: 700 mm (28"). Adjustable Height: 25 mm to 180 mm. Machine Footprint: 1050 mm x 2815 mm. Weight: 350 kg (770 lbs). Please get in touch with any questions regarding machine capabilities or material limitations!

Condition: refurbished (used), Schon Kaev 6005 Hydraulic Cutting Machine with Returning Hammer Csdpfx Aoya Twuofnspu Pressing force: 40T Working area: 1600mm x 650mm Motor: 5.5kW Maximum clearance: 220mm Stroke: 15mm - 180mm Weight: approx. 3500kg Complete manufacturer's documentation included Machine in very good technical condition, fully serviced

Condition: used, Trolley Beam Punching Machine / Trolley Beam Punch Sandt Type 530 - Used Machine Punching force: 30 tons Table size: 1600x500 mm Trolley size: 500x500 mm Cpedpfx Aox Sdzpefnsu Used, overhauled machine

Condition: used, Sandt 530 machine available with 80 T or 100 T Punching force: 800 kN Table size: 1600 x 800 mm Punching stroke: 20 – 165 mm, infinitely adjustable Working height: without punching pad approx. 1000 mm Overhauled or Punching force: 1000 kN Table size: 1700 x 1050 mm Punching stroke: 20 – 165 mm, infinitely adjustable Working height: without punching pad approx. 1000 mm Overhauled Cpjdpfx Afjx Sdy Ejnou

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 101705 CE, total width: 2,450 mm, total length: 2,290 mm, total height: 1,970 mm, overall weight: 5,100 kg, Lift table punching machine; retractable bridge Cpsdpfx Aox Nvtrefnou - Punching force 800 kN - Table dimensions 1600 x 800 mm - Weight 5100 kg - W x H x D approx. 2450 x 2290 x 1970 mm - Hydraulic oil approx. 125 l HLP 46 - Punching pad P178 NE, 10 mm thick - Special accessories: electrically adjustable support legs - Triggering via button or single-cycle safety light curtain - Technically inspected and fully overhauled - Condition as new - Colour RAL 7035 grey - Without hydraulic oil

Condition: excellent (used), Year of construction: 2011, Ares Magic Flap MG1200 CE – Hydraulic die-cutting press with front-rear traveling head ARES machines combine the best aspects of hydraulic and electronic technology in die-cutting systems. Cjdoxzi S Aspfx Afnopu Pressing force: 27 tons Working area: 1200 mm x 500 mm Maximum stroke: 100 mm Pump motor: 1.5 kW Hammer drive motor: 0.75 kW Overall dimensions: 2920 mm x 1050 mm x h 2220 mm Weight: 2,600 kg Included: - Complete manufacturer documentation - New hydraulic oil - Cutting board - Work lights Machine in perfect technical condition, fully serviced Price per machine on request Assistance with transport arrangements available

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Ares K12/6 CE – Hydraulic Die Cutting Press with Right-Left Traveling Head ARES machines combine the key advantages of hydraulic and electronic technology within the domain of cutting presses. Pressing force: 40 tons (Max version) Table dimensions: 2000 mm x 750 mm Ram (hammer) dimensions: 750 mm x 750 mm Ram stroke: 10 mm – 150 mm Pump motor: 1.5 kW Ram drive motor: 0.75 kW Overall machine dimensions: 2420 mm x 1000 mm x 2150 mm (H) Weight: 2050 kg Year of manufacture: 2014 Codpfx Ajxu Nzwjfnspu Straightforward, user-friendly operation – all functions adjustable from a clear touchscreen panel Full manufacturer documentation included Machine in excellent technical condition after comprehensive servicing Price on request

Condition: used, Year of construction: 2004, functionality: fully functional, pressing force: 40 t, installation height: 200 mm, stroke length: 200 mm, table width: 1,300 mm, table length: 1,500 mm, Technical data: Total pressure output 400 kN Cpedjvzwxujpfx Afnou Total pressing area 1300 x 1500 mm Total pressing table 1300 x 1580 mm Spec. pressure at full design 2.1 daN/cm² (kp/cm²) 4 cylinders 60 mm diameter 200 mm stroke Operating pressure 350 bar Height of the pressing chamber 200 mm Loading width 1600 mm Steel plates Roller bars arranged to the right and left of the lower heating plate for moving the press package in and out. Roller bars can be raised and lowered pneumatically by the operator, can only be activated at the bottom dead center of the pressing table. Max. load 500 kg.

Condition: new, Year of construction: 2024, functionality: fully functional, The SR 8 screw compactor from Koltex is an advanced solution designed for drying film flakes and preparing them for the extrusion process. This innovative machine effectively reduces the moisture content of the material to around 5%, significantly impacting the quality of the final recycled product. Modular construction The machine can be customized to meet the individual needs and requirements of the customer, allowing it to be used to its optimum potential in a wide variety of applications. Reliability The use of renowned drive components with Cedjuqwzwspfx Afnspu a high degree of efficiency reduces operating costs while extending service intervals. Intelligent machine operation Touch panel with intuitive interface for easy control and monitoring of the working process. Space-saving The press is designed to be compact, saving valuable space in the workplace. Capacity (LDPE film): 1500 KG/H Auger diameter: 500 mm Engine power: 45 kW Scraping power: 7.5 kW Feed size: 760x650 Overall dimensions: 6097x1833x2729 Weight: 6800 kg

Year of construction: 1993, condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1993 Machine-No. 2559 pressing force: 2800 kN heating plates: 500 x 500 mm heating: electric distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Cpjdpfxsn Sm A So Afneu Good, used condition. With CE-marking.

Year of construction: 1990, condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1990 Machine-No. 2559 pressing force: 2800 kN Csdpsn Sm Ayofx Afnepu heating plates: 500 x 500 mm heating: electric distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Good, used condition. With CE-marking.

Year of construction: 2001, condition: excellent (used), This press from Collin at Plastima Used Machinery in machine storage. The machine is from 2001 and has a normal number of working hours for its age. Cjdpfx Aen Smghjfnjpu – Brand: Collin Pilot & Lab Solutions – Model: P200P – Year built: 2001

Year of construction: 2003, condition: ready for operation (used), There are two identical presses available, max. stroke speed: 200mm/s, oil viscosity: 46cSt a 40°C, max. hydraulic/operating pressure: 25/ 210bar, weight of the half tool: 10t, pump power at 75/ 210bar: 200/ 70l/min, pump motor power: 30kW, weight: 25t. Csdpeivt R Aefx Afnopu

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Cpsdpjdwf Dbsfx Afnju