Ernwein Sarl

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 252158, total length: 8,700 mm, total width: 1,400 mm, type of input current: AC, input voltage: 400 V, overall weight: 1,450 kg, Full functional. 5,3kW Digital angle-meters (which are add-on). Full operating documentation and electrical schemas. Available to see at work on site. Ibsdpfx Aez Dbwajkpob

Year of construction: 1980, condition: good (used), Underfloor circular saw, cut-off saw, miter saw, panel saw, table saw, circular saw, construction site circular saw -Manufacturer: Hanning, table saw, construction site circular saw -Type: HTK 315/2-Q62 -Motor power: 2.2 kW / 2720 rpm -Voltage: 380 V / Connector pole-changing -Saw blade: max. Ø 315 mm -Cutting height 75 mm -Stop holder: without stop -Dimensions 890/720/H900 mm Ibsdpfez Ayizjx Akpob -Weight: 43 kg

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: 1510051228, Fully functional CNC machine from 2010. You are welcome to visit and see the machine in operation. The buyer is solely responsible for dismantling and transporting the machine to their location. Isdpfx Asz Aki Eekpebb

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 1510051180, Fully functional CNC machine from 2008. Viewing is possible to see the machine in operation. The buyer is solely responsible for dismantling and transporting the machine to their location. Ibjdpfx Aez Akh Uokpjb

Year of construction: 2001, condition: used, Max. drum length: 7,500 mm Max. saw blade diameter: 550 mm Control E 550 Iodpfx Aozzmixjkpebb Swiveling inside and outside motorized up to 140 degrees at both units (3-axis machine) Pneumatic tilting of the angle between 45 and 90 degrees with digital angle display Minimum quantity spray device Machine is loaded free

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 282395, type of input current: AC, total height: 2,500 mm, total width: 4,500 mm, total length: 20,000 mm, overall weight: 2,500 kg, input voltage: 400 V, workpiece diameter (max.): 270 mm, input current: 50 A, input frequency: 50 Hz, Profile Saw-Centre 100, for aluminium profiles, operated directly from SchüCal. * PSC 100 RL: RIght−hand loading, removal from left−hand side. * Flexible preparation regardless of profile system * Automatic process flow * Layout magazine: −With 6 spaces (can be expanded) −For profile lengths from 0.6 m to 7.5 m (can be expanded) −Manual setting on profile width using centrally adjustable stops −Profile dimensions: max. 160 mm wide and 270 mm high * Gripper feed mechanism for feeding profiles into the saw (max. = 120 m/min) * Saw: −Saw blade 550 mm −Automatic angle setting + 45o / 90o and −45o / 90o including intermediate angles −Profile support system adjusts automatically to profile contour −Integral micro spray −Conveyor belt for removal of waste from saw * Profile buffer −Profiles removed by means of a belt conveyor −9 extrusions −Belt length: 1 m −For profile lengths from 0.15 m to 7.5 m * Special stop for automatic cutting * PC touch-screen control * Storage space for label printer Ijdpfx Aszzkc Aokpjbb * Noise reduction hood * Paint finish: Schüco blue (similar to RAL 5010)

Year of construction: 2001, condition: used, functionality: fully functional, Zaagmachine emmegi Magic classic tu500 Iodpfezycxgjx Akpjbb Zaagblad 500mm

Year of construction: 2013, condition: used, Saw blade diameter (vertical): 550 mm Iodpfx Akozx U S Nspsbb Saw blade diameter (horizontal): 500 mm Max. profile height: 250 mm Max. feed rate: 830 mm Digital angle displays for material stop and tilting of both saw units Pneumatic material clamps Minimum quantity spray device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Year of construction: 2018, condition: used, Manual length adjustment via hand crank For attachment to any Elumatec single-head saw (right) Ijdpfozx U Nnsx Akpobb Max. feed length: 3,000 mm

Year of construction: 2006, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 7200 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control E 500 Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 3 angle heads Profile length measurement at the head Tensioner detection and automatic displacement 8 pneumatic material clamps Ijdpfxszx D Sfe Akpsbb Oscillating operation possible Photoelectric sensors

Condition: good (used), Year of construction: 2011, machine/vehicle number: 1612124593, Offer 26309 Technical Data: Ibedpfx Akjzw Datepjb - Saw blade dimensions: 280 x 3.8 x 40 mm - Saw blade speed: 3200 rpm - Cutting range at 90°: approx. 100 x 70 mm - 200 x 40 mm - Miter angle adjustable: Left: 0 - 90° - Right: 0 - 45° - Compressed air connection: 6 - 8 bar - Air consumption per working cycle: 10 L/min - Drive: 400 V / 0.74 kW - Space requirement: approx. W 650 x H 1100 x D 750 mm - Weight: approx. 120 kg - Includes: - Pneumatic vertical clamping device - Pneumatic coolant spray device - Infeed roller conveyor: 2500 mm - Outfeed roller conveyor with stop and - Digital position indicator: 3000 mm

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 2022/5/18, functionality: fully functional, Saw blade I, diameter/bore: 550 mm/50 mm Motor: 3 kW; 400 V; 2800 rpm Saw blade II, diameter/bore: 350 mm/40 mm Max. workpiece dimensions: 210 x 100 mm Motor: 2 kW; 400 V; 2800 rpm Vertical cutting height: 150 mm Swivel range of saw blade I: -70°/90°/45° Feed: Pneumatic, controlled by a two-hand system Ibedjzwqu Rspfx Akpob Air connection: 8 bar Operating manual: Available Dimensions (width x depth x height): 1200 x 1000 x 1400 mm Weight: 480 kg

Year of construction: 1995, condition: used, Max. saw blade diameter: 280 mm Pneumatic material clamps Rotatable table with locking points Ibjdpfxszvd N Ej Akpob Minimum quantity spray device Roller tracks and length stops available in different lengths on request

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, HM circular saw blade for aluminum and plastics, 420 x 3.2 x 40 mm, 108 teeth, negative tooth angle Hydraulic feed brake Pneumatic material clamping system, on both sides from above Pneumatic saw blade spray system Pneumatic maintenance unit, consisting of a water separator, pressure reducing valve with pressure gauge, and oiler Ibedpfx Akezu Azdepjb Crosscut fence for cutting angled pieces Machine stand

Year of construction: 2009, condition: used, Max. saw blade diameter: 500 mm Max. feed length: single 650 mm (3-stage feed possible) Pneumatic material feed Pneumatic Sawing Feed Minimum quantity spray device Piece counter with shut-off automatic Digital display of conveyance length Cutting height quickly adjustable via 4-position selector switch Ibedpszuzmfofx Akpeb Includes chip suction 800 kg

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2450099150, 1 No 2019 Elumatec MGS245/00+AMS Upstroke saw with 6.7m infeed roller bed, with 7.6m outfeed roller bed – however, calibrated cutting unit to 6.8m Saw fitted with calibrated automatic measuring system for accurate cutting Ibjdpfezupzqsx Akpsb This machine can cut straight cuts, mitres up to 55 degrees and compound mitres. Straight cut maximum in table below. Max Width of material cutting 455mm BUYER TO ARRANGE COLLECTION OF SAW WE CAN ASSIST WITH LOADING ONTO SUITABLE VEHICLE

Year of construction: 2026, condition: new, functionality: fully functional, Standard configuration: ▪   No. 2 carbide tungsten saw blades Ø 600 mm ▪   Integral safety casing for cutting area protection ▪   No. 4 vertical vices ▪   2 Retractable pneumatic intermediate supports ▪   Loading roller conveyor 400 (Useful length 2,2 m) on mobile head ▪   Minimum quantity lubrication (MQL) with pure oil ▪   Greasing gun ▪   Set up for the extraction of chips and fumes ▪   15' touch screen control panel (IP65) on linear guides ▪   PC operator interface ▪   Operating system Windows ® ▪   Real time numerical control Ibodpfx Ajztr Rrekpsb ▪   FSTCUT4 software licence ▪   Software management of cutting in minimum and super-minimum mode for special lengths ▪   Software management of cutting in oversize mode for special lengths ▪   Software management of cutting in trimming mode for cut ends with variable angles ▪   Teleservice for the first 12 months Optional equipment installed on the machine: ▪ PR-29060 Profile lifting kit ▪ PR208207 Third intermediate pneumatic retractable support ▪ PR206695 Chip conveyor belt ▪ PR203359 Label printer ▪ PR203356 Licence for step-by-step cutting software, complete with 1 extra surface on fixed head, horizontal clamps on fixed and mobile head (no. 2), 90° cuts, two-hand control ▪ IV33160 Vacuum cleaner for extraction of chips and fumes

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, power: 4.4 kW (5.98 HP), cutting height (max.): 6,000 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 90 °, rotational speed (max.): 2,800 rpm, On sale Pertici saw that is no more required. wo headed automatic saw for cutting aluminium profiles. Saw blade diameter: 500 mm Max cutting lenght: 6000mm Min cutting lenght: cca 330 mm Engine power: two three-phase motors, each one 2,2 kW (summary4,4 kW), 2800 rpm Head tilt: 90-45° Year of production : 2016 Price: 9300€ Iedpfsztc Dcex Akpebb The machine can be seen in Rugvica, Croatia (nearby Zagreb).

Condition: new, CNC double-head mitre saw equipped with Ø 600 mm saw blades, designed for precise and automated cutting of profiles. The machine features a robust electro-welded steel base and consists of one fixed cutting unit and one mobile cutting unit with electronic positioning along the X-axis. Both cutting heads are equipped with controlled rotary axes (RF and RM), allowing automatic positioning of the cutting units at angles ranging from 45° inward to 20° outward. Ibedpfjztb Hpox Akpsb The saw blades are operated by hydro-pneumatic cylinders, with adjustable feed speed and rapid return. Main features: CNC double-head mitre saw Ø 600 mm saw blades One fixed and one mobile cutting unit Electronic positioning of the mobile unit – X-axis Controlled rotation of both cutting heads – RF and RM axes Cutting angle range: 45° inward to 20° outward Hydro-pneumatic blade feed Adjustable blade feed speed Rapid blade return Horizontal clamping system with double cylinders Vertical profile clamping system Pneumatically operated safety guards for the cutting areas 15” touch-screen monitor Windows 10 platform Programming and management of cutting operations via touch-screen interface Provision for an industrial label printer for workpiece identification and association with the corresponding production order The machine is designed to provide precision, productivity and ease of operation, and can be easily integrated into the production process.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Electronic control of the X-axis X-axis positioning speed (m/min) 25 Ibedpszr E S Tjfx Akpjb Detection of the moving head position using a direct measurement system with an absolute magnetic strip Mechanical adjustment of intermediate angles; maximum external inclination 22°30' Oil-pneumatic blade feed Useful cutting length (mm) 4,000 Blade diameter (mm) 550 Blade motor power (kW) 2.2

Condition: used, Year of construction: 2017, For processing aluminum and PVC profiles: * Miter cuts possible in 3 planes, also usable as a crosscut saw. * Manual adjustment of the horizontal saw blade, allowing it to be positioned up to 20 mm in front of the vertical blade. * Notching options: right-angled, single-sided bevel, double-sided bevel, triple-sided bevel. * Processing of profiles up to 300 mm wide at 90°, sharp miter cuts up to 30°, profile height 280 mm. * Notching depth: horizontal up to 185 mm, vertical up to 210 mm at 90°. * Notching width at 90°: 300 mm. * Max. profile height 280 mm. * Swivel range of the saw blade vertically from 30° - 90° - 30° (front/center/rear) manually, positioning via a mechanical digital display. * Swivel range of the saw blade horizontally with the vertical saw blade 30° - 90° - 30°, manually, positioning via a mechanical digital display. Isdpfx Aozrk Rbjkpobb * Material stop (tabletop) can be swivelled manually to the left and right from 30° - 90° - 30°, positioning via a scale. * Material depth stop is manually adjustable with a sliding carriage and hand clamp, positioning via a mechanical digital display.

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 124169101-03-EN-EP124, Equipment: 3rd hydraulic function, It was used for pressing corners. Isdpfjzrhvuox Akpjbb

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 242724, Automatic miter cutting Ibjdpfx Aszqu Egskpeb Overlength cutting Saw blades 500mm etc.

Year of construction: 2013, condition: used, Max. drum length: 4,500 mm Max. saw blade diameter: 550 mm Windows-based control E 555 with touch display Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45 and 90 degrees Digital angle displays Iedpezqbp Eefx Akpebb Moving roller conveyor Chip suction on both units Minimum quantity spray device label printers Machine is loaded free

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 9346, Machine in good condition Vertical saw blade diameter: 600mm Horizontal saw blade diameter: 500mm Iodpfxozp Rnne Akpobb Notching width: at 90 degrees, processing of profiles up to 300mm Miter cuts up to 30 degrees Maximum profile height: 280mm Notching depth: at 90 degrees, horizontally up to 185mm Material stop can be swiveled to 30 degrees, 90 degrees, 45 degrees Motorized adjustment of the angle with digital display