Girke Metallbau GmbH

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC Nedpjzw Et Iefx Ab Aswk year of construction 1998 . Model : CB 18 . Series : B20 .

Condition: ready for operation (used), Year of construction: 1979, Available immediately ex-works: Swivel bending machine, Lotze Type 161 / 2500 / 6 Year of manufacture 1979 Bending length 2550 mm Material thickness up to 6 mm Nodpezwuilofx Ab Aewk Drive power 7.5 kW Weight 6 tons Price: EUR 6,750.00 plus VAT, ex-works.

Condition: ready for operation (used), Year of construction: 1982, Available immediately, ex works: Shearing machine, Schröder Capacity: 2500 x 4 mm Cutting length: 2550 mm Material thickness: up to 4 mm Electric back gauge: 1000 mm Drive power: 5.5 kW Nwedpfx Abozwuifo Aek Weight: 3.5 tons Price: EUR 4,750.00 plus VAT, ex works

Year of construction: 2025, condition: ready for operation (used), Automatic Coil Cut-to-Length Line manufactured in 2025. This SACFORM CRL1503-6 is designed for processing aluminum, mild steel, and stainless steel with a material thickness capacity of 1-3 mm. It features a maximum coil weight of 6000 kg and a finished sheet length of 500-4000 mm. If you are looking to get high-quality cut-to-length capabilities, consider the SACFORM CRL1503-6 machine we have for sale. Contact us for further details regarding this machine. • Capacity: 1500 mm width x 1–3 mm thickness (AL/MS), up to 1.5 mm (SS), 6-ton coils • Materials: Aluminum (AL), Mild Steel (MS), Stainless Steel (SS) • Finished sheet size: width 500–1500 mm; length 500–4000 mm • Coil specs: ID 490/610 mm; OD max 1400 mm; weight max 6000 kg • Line speed: 30 m/min free working speed (start-stop shear adds ~2.5 s per cut) • Operators: 1 • Power and utilities: • Electrical: 380 V, 3-phase, 50 Hz; auxiliary 220 V, 50 Hz; 24 V DC solenoids • Installed power 32 kW; typical working consumption 13 kW • Pneumatic air: 6 bar • Hydraulics: service 120 bar; main service 220 bar; 2 hydraulic units, each 40 L • Control and electronics: Siemens PLC; Siemens/Rexroth electronics and control panel; 7" touchscreen; remote support capabilityLine configuration (included modules and key specs) • Hydraulic coil loading car: • Capacity 6000 kg (single coil), max width 1500 mm, max OD 1400 mm • V-type bed, hydraulic traversing and lifting (300 mm stroke), panel control • Single-mandrel hydraulic decoiler: • Capacity 6000 kg; max strip width 1500 mm; ID 490–610 mm; OD 1400 mm • Hydraulic mandrel with conical expansion; motorized drum with reducer, adjustable speed • Upper pressure/safety arm; laser sensor for controlled decoiling and auto stop • Automatic routing/threading platform with servo bending arm: • Automatic coil threading and transfer to straightener • Bending arm: 2 rollers Ø110 mm, servo-driven; 2 pistons • Platform movement: hydraulic up/down and fwd/back; automatic, no manual threading • Straightening unit: • Speed up to 30 m/min; working width 500–1500 mm • 11 rollers total: 7 straightening, 2 feeder, 2 pinch (all Ø110 mm) • Motorized straightener adjustment; hydraulic openable roller group • Pneumatic roller pressure; low-backlash gear group; gear material 8620 • Vertical bearing guides; 2 guiding units; width adjustment via gear system • PVC coating feature included • Servo feeder: • Speed up to 30 m/min; max width 1500 mm; thickness 1–3 mm • 2 servo rollers (upper/lower) Ø110 mm; roller material 4140 • Encoder-based cut-to-length control; pneumatic pressure; low-backlash gears • Guiding: double-sided lateral guides, horizontal guide rollers, gear-width adjustment, right/left alignment to 90° • Servo control: automatic feeding cycle, programmable velocity, programmable cut length and quantity, memory for 250 programs and up to 50 lengths, 7" touchscreen, 8 external outputs • Start-stop guillotine shear: • Cutting capacity 1–3 mm; width 1500 mm • Blade material 2379; high-carbon/high-chrome blades; 2 edges upper, 4 edges lower • Adjustable blade gap; mechanical sheet clamping • Approx. 2.5 s cycle time loss per cut; Teflon slideways on cutting beam • Hydraulic and pneumatic brands: Bosch Rexroth/Bucher hydraulic valves; Festo/Pemaks pneumatics; motors Gamak/Yilmaz Nodpfozwc Ipsx Ab Ajwk • Electrical/automation: Siemens PLC; Siemens/Rexroth components; electrical cabinet and automation systemNotes • Stainless steel capacity limited to max 1.5 mm thickness.

Year of construction: 1988, condition: used, Transversal Sheet metal Stiffening machine ALMORE type DS RT 1500 Year of construction:1988 Capacity: 1550 x 1,5 mm Thickness: from 0,4 to 1,5 mm Speed: from 7 to 15 m/min. Foot control Length: unlimited Useful machine for making ventilation ducts Voltage: 380 V Dimensions (L x W x H): 2000 x 800 x 1500 mm Weight: approx 1500 kg Nwsdpfxszwclhs Ab Ask

Condition: good (used), PULLMAX P21S Nibbling Punching Machine - Made in Sweden - With tooling* *PULLMAX P21S Nibbling Punching Machine - Swedish made - A legendary machine for sheet metal and boiler making. > > *Features:* > - Model: P21 S - Deep swan neck 1000mm > - No.: 52540-25 - Year of manufacture: early 1960s > - Operates on 380V three-phase power > - Tool shank 19mm (standard P5/P6/P21) > - Machine in very good condition, on a stand, ready to use > > *Included tooling:* > - Set of dies/tools visible in the photos (nibbling, bending, etc.) > - Upper and lower tool holders > > An extremely reliable machine, ideal for craftsmen, bodywork shops, and boiler makers. Selling due to duplication. Nwsdpfxozv Tqro Ab Aok > No trades. No delivery.

Year of construction: 2019, condition: ready for operation (used), overall weight: 1,500 kg, total height: 1,300 mm, This TFM GM-SB-38CNC-2A1S was manufactured in 2019. It features a max bending capacity of 38 × 2 mm, bending speeds up to 65 °/sec, and motor power of 4 kW. Ideal for precise bending with a max bending angle of 180° and effective length over mandrel of 3200 mm. Consider the opportunity to buy this TFM GM-SB-38CNC-2A1S profile bending machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Max. Bending capacity: 38 × 2 mm • Min. Bending radius: 20 mm • Max. Bending radius: 200 mm • Max. Bending angle: 180° • Bending precision: ±0. 1° • Turning angle precision: ±0. 1° • Feeding precision: ±0. 1° • Effective length over mandrel: 3200 mm • Bending speed: 65 °/sec • Turning pipe speed: 180 °/sec Extra Information Feeding speed: 900 mm/sec Motor power of oil system: 4 kW Oil pump flow rate: 17 L/min Max. pressure: 160 kg/cm² Nedpfozvu Rasx Ab Aewk Dimensions Machine Depth 4000 mm

Year of construction: 2022, condition: ready for operation (used), controller manufacturer: SIEMENS, table load: 3,000 kg, Automated sheet metal storage system manufactured in 2022. This TRUMPF Automated Sheet Metal Production System features a storage height of 7,900 mm and a maximum load per storage location of 3,000 kg. It includes 266 storage locations and supports sheet formats of 3,050 x 1,525 mm. If you are looking to get high-quality automated storage capabilities, consider the TRUMPF Automated Sheet Metal Production System we have for sale. Contact us for further details. • Storage system: STOPA Compact II • Type: Automated sheet metal storage system with chaotic storage management • Storage height: 7,900 mm • Sheet format: 3,050 x 1,525 mm • Maximum load per storage location: 3,000 kg • Number of storage locations: 266 • Total storage capacity: 798 t • Configuration: 8 sections/towers, up to 37 storage levels per section • Pallet format: GF 3050 x 1525 x 90 mm • Pallet types: SPO, SPMgl • Loading heights: 185 / 275 / 460 mm • Functions: Automatic material storage and retrieval; automatic material supply to connected production cells; storage interface for integrated production machines • Storage control • Server operating system: Windows Server 2022 • Central storage management and automated material flow management • Integration with TRUMPF production equipment • Connected production cells • TRUMPF TruLaser 5030 fiber (L76) • Machine type: CNC 2D fiber laser cutting machine • Working area: 3,000 x 1,500 mm • Laser source: TruDisk 6001, 6,000 W • CNC control: Siemens SINUMERIK 840D sl • TRUMPF TruMatic 6000 fiber • Machine type: Combined CNC punching and fiber laser cutting machine • Working area: 3,050 x 1,550 mm • Laser source: TruDisk 3001, 3,000 W • Maximum punching force: 180 kN • Linear tool magazine: 25 positions • TRUMPF TruBend Center 7030 (B34) – Cell 1 • Machine type: Automatic panel bending center • Max bending length: 3,123 mm • Max thickness: structural steel 3.0 mm; stainless steel 2.2 mm; aluminum 4.0 mm • Max box height: 220 mm • TRUMPF TruBend Center 7030 (B34) – Cell 2 • Same specifications as Cell 1 • System functionality (summary) • Central automated storage and retrieval of raw sheet material • Automatic supply of material to connected laser, punch-laser, and panel bending cells • Automatic transfer between storage and production stations • Centralized, high-capacity sheet handling • Main system configuration • 1 x STOPA Compact II automated sheet storage system • 1 x TRUMPF TruLaser 5030 fiber 2D laser cutting cell • 1 x TRUMPF TruMatic 6000 fiber punching and laser cutting cell • 2 x TRUMPF TruBend Center 7030 automatic panel bending cells Njdpfx Abozu Sugs Aowk Additional equipment • For TRUMPF TruLaser 5030 fiber (L76) • Automatic pallet changer • LiftMaster Compact 1530 (automatic loading and unloading) • STOPA storage connection/interface • For TRUMPF TruMatic 6000 fiber • SheetMaster 3000 x 1500 mm (automatic sheet handling) • GripMaster 3000 x 1500 mm • Storage system integration/interface • For TRUMPF TruBend Center 7030 (both cells) • 2-axis part manipulator • 5-axis rear stop • Rotary manipulator • ToolMaster Bend • Automatic loading and unloading • Storage interface • System-wide • Central storage management server (Windows Server 2022)

Year of construction: 1989, condition: ready for operation (used), Capacity: 12mm at 3010mm sheet width, cutting length: 3050mm, max. pressure: 200bar, min./max. cutting angle: 0.5°-3°, number of hold-downs: 18, max. stroke rate: 21strokes/min, squaring arm length: 1000mm, back gauge: 1000mm, working height: 900mm. Dimensions X/Y/Z: approx. 3800mm/1850mm/2030mm, weight: approx. 9000kg. Documentation available. Inspection possible by appointment. Nwodpfszukrqox Ab Ask

Year of construction: 1990, condition: ready for operation (used), Offered for sale is an Atlantic guillotine shear. Cutting length: 3000mm, max. cutting thickness: approx. 6mm. Documentation available. An on-site inspection is possible. Nwodpfx Abeztzrfj Aok

Year of construction: 1986, condition: ready for operation (used), Max. pressing force: 400kN, stroke rate: 100-1200/min, connected load: 18kW, compressed air connection: R 1/2inch, 6-10bar, adjustable strokes: 13, 15, 19, 25, 32, 38, 44, 51, 57mm, max. fixed stroke (special version): 57mm, ram height adjustment: 60mm, tool installation height: 4 Mm 677, max. width of tool installation opening: 690mm, max. strip passage width: 190mm, strip feed height above clamping plate: 60-140mm, bed opening: 640x220mm, lower clamping plate: 4 Mm 671, upper clamping plate: 4 Mm 672, installation dimensions: 4 Mm 667, length: 1695mm, width: 2185mm, height: 3010mm, weight with feed unit: 6.37t. Equipment: drive control, tool clamping plate, installation dimensions, upper clamping plate, hand protection device, BBV 41.202/150 strip feed unit, strip-end monitoring, transport and lifting device, complete documentation, installation, operating and maintenance instructions and machine tools. An on-site inspection is possible. Nwsdpfeztra Tjx Ab Ajk

Condition: new, Year of construction: 2026, operating hours: 5 h, functionality: fully functional, machine/vehicle number: MP2506992, input voltage: 400 V, total width: 960 mm, total length: 1,060 mm, total height: 2,250 mm, pressure: 200 bar, overall weight: 675 kg, stroke length: 200 mm, control voltage: 24 V, input frequency: 50 Hz, power: 2.2 kW (2.99 HP), pressing force: 6 t, Hydraulic Clinch Press Miller MP645E, with optional vibration conveyor and automatic feeding tool for the installation of self-clinching studs, nuts, stand offs and other fasteners. Technical data: Press force 2-57KN (6 ton) Throath depth 450mm Zylinder stroke 200mm Travel speed 110mm/sec. Cycle time 3sec. 1200/hour Size H 2250mm x W 960mm x D 1060mm Weight ca. 675 Kg Electrical connection 400V, 2.2 KW  Berghof PLC control system  In-house programming  Automatic press force adjustment with counter; position-based  Memory for up to 1,000 parameter sets and 200 programs  Electronic and mechanical safety system with distance monitoring  Safety electronics by MURR & EATON  Safe processing of conductive and non-conductive materials  Linear length measurement system Nwsdjztcykopfx Ab Aok  Electronic (indirect) press force measurement  Proportional valves for electronic press force control  Peripherals and digital I/O by Beckhoff  Made in Germany; in-house service support Optional  Tooling set with 14 or 33 punches and dies  4-station die holder with position sensor; parameters for each of the 4 stations can be selected individually and stored in the program  Vibratory feeder for automatic transport of press-fit elements  Singulation and feed unit for automatic processing of clinch fasteners  Length measurement of automatically fed press-fit studs or bushings  Force/displacement diagram displaying the most recent press-fit data  Custom requirements—such as program selection via barcode scanning, production data output, etc.—can be programmed in-house  Adaptation to handling systems or robots possible; communication via PROFIBUS, PROFINET, EtherCAT, or Modbus We are happy to answer any questions you may have; on-site visits are possible by appointment. Guaranteed, lasting reliability through the use of high-quality components Simple handling and short changeover times Low maintenance and service requirements Very flexible due to the large number of possible applications Automatic feeding system, touch screen control etc. optional available Energy-saving, solid design with the energy efficiency of a hydraulic system Electronic and mechanical safety system for 100% safe processing of conductive and non-conductive materials Connection to the usual power supply (400V) Processing of all common press-in elements thanks to high press-in force, press-in nuts up to M12, threaded bushes up to M10, threaded bolts up to M8 Continuous adjustment of the press-in force, repeatability +/-1%

Year of construction: 2002, condition: ready for operation (used), overall weight: 4,500 kg, cutting length (max.): 2,080 mm, sheet thickness (max.): 6 mm, Hydraulic shearing machine manufactured in 2002. This HERA TS 2000x6 features a maximum sheet thickness of 6 mm and a cutting length of 2080 mm. It operates with a stroke rate of 18 strokes per minute and is powered by an 11 kW motor. If you are looking to get high-quality shearing capabilities, consider the HERA TS 2000x6 machine we have for sale. Contact us for further details. - Stroke Rate: 18 1/min- Motor Power: 11 kW- Noise Level: < 70 dB(A)- Current Type: 3~ AC- Operating Voltage: 400 VAC- Control Voltage: 24 VDC- Frequency: 50 Hz- Fuse / Backup Protection: 32 A Nwsdpezr H Nmsfx Ab Aok

Year of construction: 2008, condition: ready for operation (used), A Trumpf CNC laser cutting machine is offered. Working area X/Y: 3000mm/1500mm, Z-axis travel: 115mm, laser power: 5000W, max. material thickness steel/stainless steel/aluminum: 25mm/20mm/12mm, operating hours: approx. 35000h, laser operating hours: approx. 13000h. The following components were replaced: E/R module in 2024, power tube in 2020 and blower turbine in 2016. Overall dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12t. An on-site inspection is possible. Nwjdpfx Abszrhg Hj Aok

Condition: ready for operation (used), Offered is a combined Peddinghaus section shear with punch unit for punching, shearing and notching flat bar, sections and bar stock. Punching force: approx. 80t, punching capacity: 31mm in 20mm steel, throat depth: 510mm, max. round bar diameter: 50mm, max. square bar size: 45mm, max. angle iron dimensions X/Y/Z: 140mm/140mm/13mm, weight: approx. 3400kg. An on-site inspection is possible. Nodpfx Abozrhhde Aswk

Year of construction: 2026, condition: used, Welding robot MOTOMAN YR-HP00200-B00, serial number: S0M000-1-5, year of manufacture: 2010, 2 welding torches for stud welding, MIG/MAG welding, each with 1 storage and 1 changeover device, 1 control cabinet, device number 30033151, control unit DX100, serial number: HE0305977, 1 welding power source HBS IT90, 3 blowing devices, each with 1 vibratory bowl and singulation unit VBZ3, 1 swivel arm crane, 1 balancer, 1 changeover pallet, 1 rotating device, 1 grid enclosure, 1 light curtain system SICK, 1 skylight, 1 extraction system, 1 welding power source LEIPOLD LQC MIG/MAG, automatic wire feed, process monitoring. Nwodpfxjzqzdis Ab Aok

Year of construction: 2019, condition: used, Serial No.: 430054-1-1, 2 industrial robots YASKAWA MA1440/MH12, each with DX200 control unit, serial nos.: 193423 / 193421, each with wire feeder, exchangeable pallet, rotary table, enclosure, remote control, enclosure with skylight, light curtain system, including 1 metal shelving unit, approx. 100x100x150 cm, 1 workbench, approx. 100x100x100 cm. Nwedpfozqzdcox Ab Aok

Year of construction: 2003, condition: used, machine/vehicle number: M00543, Rated force: 2,500 kN, rated power: 18.5 kW, machine weight: 25,000 kg, stroke rates in continuous operation: 19-57/min, max. stroke rates in single-stroke operation: 35/min, dwell time: 0.245 s, stroke length: 19-250 mm, max. installation space: approx. 480 mm, table size: approx. 900x1,200 mm, upstream light curtain, two-hand operation, separate control panel, control unit BEUTLER DATAPLUS 200. Njdpfx Abszqzc Ss Aowk

Condition: used, Year of construction: 2019, machine/vehicle number: A1221E0017, Machine number: 113, Laser TruDisc 4001 (FD27), serial number: L5211E0465, year of manufacture: 2019, separate cooling unit KLH L0/5TK or RL14/0TK, serial number: H00748 ff., year of manufacture: 2019 each, separate cooling unit for laser and machine, camfil MF8.5A2 separate extraction unit, serial number: 855038512, exchange table, approx. 1.7 x 3 m, light curtain system, control unit, recorded operating hours (November 2025) 37,215 h, laser on: 22,614 h. Nwodpfxezqzc Ee Ab Aok

Year of construction: 2013, condition: used, machine/vehicle number: S0541C0081, Performance: 13.5 kVA, TRUMPF TruDisc 3001 fiber laser, serial number: L3211M0613S, year of manufacture: 2013, laser power: 3,000 W, power: 20 kVA, separate RITTAL control cabinet, with RIEDEL cooling unit, control unit, 2 processing stations, recorded operating hours (November 2025): 71,954 h, laser on time: 55,034 h. Njdpjzqzcxjfx Ab Aswk

Year of construction: 2024, operating hours: 6,782 h, condition: used, machine/vehicle number: 40499, Fiber laser cutting system for large-format sheets, frame construction, sheet size up to 4,065 x 2,025 mm, travel ranges: x: 4,200 mm, y: 2,070 mm, z: 130 mm, powerful IPG laser source with 10 kW power, highly developed cutting head with automatic adjustment of the focus position, automatic pallet changer system, integrated control and drive system, Touch-L control with a 19" flat screen, scrap conveyor with collection container, large-format automation type FL for loading and unloading pallets for formats up to 4,000 x 2,000 mm in 2 levels, including Thermotec cooling unit and Camfil filter unit. Nedpjzqzcfsfx Ab Aswk

Year of construction: 2023, operating hours: 2,980 h, condition: used, machine/vehicle number: 140497, Fiber laser cutting system for large-format sheets, frame construction, sheet size up to 4,065 x 2,025 mm, travel ranges: x: 4,200 mm, y: 2,070 mm, z: 130 mm, powerful IPG laser source with 10 kW power, highly developed cutting head with automatic adjustment of the focus position, automatic pallet changer system, integrated control and drive system, Touch-L control with a 19" flat screen, scrap conveyor with collection container, large-format automation type FL for loading and unloading pallets for formats up to 4,000 x 2,000 mm in 2 levels, including Thermotec cooling unit and Camfil filter unit. Nodpszqzb Uofx Ab Aowk

Year of construction: 2019, condition: used, machine/vehicle number: 37943, Maximum capacity: 2,200 kN, working width: approx. 400 cm, automatically adjustable stops, automatic tool changer, 1-level rolling carriage with accessories. Nwodpozqzakefx Ab Aek

Year of construction: 2026, condition: used, Serial no.: 30069610, year of manufacture: 2017, power output: 36 kVA, 2 YASKAWA welding robots, each with a DX200 control unit, serial no.: 17170585, year of manufacture: 2017, serial no.: 202289, year of manufacture: 2020, MIG/MAG welding head, automatic wire feeder, exchangeable pallet with rotating device, curtain with plastic insert, grid enclosure, SICK light curtain system, central SIEMENS SIMATIC HMI control, touch panel, SKS Q80 welding monitoring system. Njdpfx Ajzqzdpsb Aswk

Year of construction: 1995, condition: used, machine/vehicle number: 211045 H110, Response time: 133 ms, clamping force: 2,500 kN, control unit, two-hand operation, upstream light barrier, separate control cabinet, 1 workbench with a Garant two-jaw vise mounted on it, storage shelf. Nodezqzcrjpfx Ab Aswk