Okleina Borek S.C.

Condition: used, Used machine Fpjdpfx Agszyy A Ns Isl Equipment and technical data:

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer Fpedszuz Hljpfx Ag Iol - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Veneer machine Manufacturer: Fischer & Rückle Type: FZR 21 Year of manufacture: 2015 For the most efficient edge gluing of parallel-connected veneer strips into continuous or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or UREA adhesives. This edge feeding joining apparatus is the most economical alternative to longitudinal joining apparatuses for cross-grain applications. Production Approx. 17-20 joints/min. Technical data Veneer strip lengths (grain direction): 350-2150 mm Fpjdpfx Agszuzptj Isl Veneer strip widths (cross-grain direction): 50-600 mm Veneer surface width (cross-grain direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips Panel Automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - The Furnimaster-plus has a veneer alignment function (reverse transport movement) - Perfect joining of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, proven horizontal pressing system that results in fully closed, strong glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to touchscreen panel, clear symbols, separate manometers with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain) directly after splicing. Short widths can be pre-set and measured with the integrated encoder. Larger widths are determined by two photoelectric sensors that are mounted at the required distance from the clipper on the direct stacking device. Direct stacking device DA-12R, belt system For unloading and stacking the veneer surface directly after joining. The joined surfaces are gently unloaded and stacked on this compact direct stacking device without any mechanical impact. Min. veneer sheet length (grain direction): 350 mm Veneer sheet widths (across the grain): 250 - 1200 mm Max. stack height: 500 mm Max. stack width (across the grain) for unloading to the rear end: 1200 mm Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding. Another Fischer & Rückle machine, type: FZR 21, year of manufacture: 2009, is also available.

Condition: like new (used), functionality: fully functional, Fisher+Ruckle Omnimaster butt welding machine Veneer feed rate: 5/50 m/min Fsdpjzl Skiofx Ag Ijpl Heating zone length: 1000 mm Cooling unit Dimensions: 2400x2300x1900 mm Max. heating temperature: 250°C Weight: 1500 kg Year: 2006 Voltage: 400V Power: 9 kW

Condition: used, Year of construction: 1993, Second-hand machine Year of manufacture: 1993 Bench-top machine The zigzag thread used as the adhesive medium is applied from below Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm in length, 35 mm in width and a thickness of 0.3–2 mm Electrical connection: 230 V Column reach 700 mm Material feed rate approx. 6 m/min. Weight approx. 54 kg Availability: at short notice Fjdpfx Agezk N D Rs Ispl Storage location: Flörsheim

Condition: used, Second-hand machine Fpodjzk Nqqspfx Ag Iol Second-hand veneer splicing machine from Kuper, model FW 1150 Passage width: 1150 mm Feed speed: approx. 10–30 m/min Veneer thicknesses: 0.3–3 mm excluding tables at the front and rear Availability: at short notice Location: Röllbach

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 740703/01, passage width: 2,800 mm, input voltage: 400 V, type of input current: three-phase, The machine is fully operational and can be inspected during production while powered on. Also included in the sale is a Fisher + Rückle veneer parallel milling/gluing unit, capable of: edge milling with diamond tools automatic glue application preparation of veneer edges before splicing The complete line has been used in professional production and has been continuously maintained. Main advantages: Fjdpfszdiinjx Ag Iepl Heavy-duty industrial Fisher + Rückle quality Very stable and precise operation Machine in good working condition Can be demonstrated during operation Parallel milling and glue application unit included Diamond tooling included Suitable for professional veneer production The machine is located in Denmark and can be inspected by appointment.

Condition: used, Year of construction: 2009, functionality: fully functional, Veneer splitting machine FANNINGMASTER 515 for sale! Roller conveyor INCLUDED Veneer specifications Veneer strip width (cross grain) 45 - 515 mm Veneer strip length (grain direction) 400 - 4000 mm Veneer strip thickness (depending on quality of veneer) 0,3 - 1,5 mm Veneer package height 10 - 40 mm Machine capacity Throughput speed approx. 30 m/min. Machine specifications Electric energy 1,2 kW Compressed air 6 bar Power consumption Compressed air consumption 5 NL/min. Dimensions / weight Measurements Fedpfx Aoy Tngxog Iopl Length 2360 mm Width 1570 mm Height 1750 mm Net weight, approx. 1150 kg Working table height 900 mm

Condition: used, Year of construction: 2006, functionality: fully functional, CUTMASTER Fisher + Rückle AFD-35/2600 is an industrial, heavy-duty double-blade longitudinal veneer guillotine. Tech. data Cutting length 2.600 mm Fsdpfx Aey Tm Tkjg Iepl Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Double-blade Rip fence Yes Pressure beam pneumatic Blade drive pneumatic Weight 3.800 kg CE marking Total connection 10 kW

Condition: good (used), functionality: fully functional, with heating wire, Fodpfxsyayzas Ag Ijpl outreach 920 mm, material 0.4-2 mm, feed rate approx. 15 m/min, required space 1400 x 600 x 1600 mm, weight approx. 350 kg in good condition Price ex works Transport possible at extra cost!

Condition: used, total length: 2,800 mm, total width: 1,100 mm, total height: 2,250 mm, - Documentation available: No - CE certificate present: No - Number of glue rollers [pcs]: 4 - Roller material: Rubber - Roll diameter [mm]: 230 - Max. working width [mm]: 1600 - Transport dimensions: 2800mm x 1100mm x 2250mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Fpjdpexz E Awjfx Ag Iol VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, FWJ900 Veneer Gluing Machine with glue thread, well-maintained condition. Maximum veneer thickness 2 mm, minimum 0.4 mm. Operated via foot pedal. Floor-standing model, feed speed 7 mm, throat depth 900 mm. Weight approx. 200 kg, dimensions: 1400 x 500 x 1680 mm. Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers. Fpodpfx Agsvkfncj Ijl

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 140611/3, Fisher + Rückle Gluemaster - glue applying machine. Machine is 100% functional. Fodpfeum R Agox Ag Iopl