ORD Oberhessische Rollen-Druck GmbH

Condition: excellent (used), Year of construction: 2018, Ref:11150 . 2018 Horizon HT-30C Trimmer Nedpfsz Elvvjx Ac Aodb For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Including knives, tools and accessories. Specification: Book Size, Max: 300 x 300 mm Min: 100 x 142 mm Pile capacity : 2 -- 51 mm Mechanical speed, Max: 200 cycles/hr. Production example, 1,000 books/hr. with 5 x 10 mm books in pile. Voltage frequency: 3-Ph, 200/220/400V, 50/60Hz.

Condition: excellent (used), Year of construction: 2020, Ref:11151 . 2020 Horizon HT-300 iCE Trimmer LIKE NEW - ONLY 980 BOOKS TRIMMED! For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Designed for either offline operation or inline connection to Horizon perfect binders. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Corner trimming capability Including knives, tools and accessories. Specification: Ndsdoz Elvpepfx Ac Aeb Maximum speed: 300 cycles/hour Stack production: Up to approx. 590 books/hour depending on feed/configuration Maximum untrimmed size: Up to 350 × 350 mm, depending on table/configuration Minimum untrimmed size: Down to 152 × 107 mm with A6 Table K Maximum trim width: 99.9 mm Minimum trim width: 2 mm (0 mm/no cut can also be selected) Book/stack thickness: 1–51 mm Pressing force: 1–7 kN, servo controlled Machine dimensions : Approx. 2,406 × 1,280 × 1,550 mm W × D × H Operation: Fully automatic setup Workflow: iCE LiNK / JDF compatible

Condition: excellent (used), Year of construction: 2012, Ref:11153 . 2012 SCS Automaberg Trim & Perf Duplex Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Features: A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. Ndsdpfx Acez Ek S Aj Aeb ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: good (used), Year of construction: 2011, • Wohlenberg WB 92 TS cutting machine • Approx. 920 mm cutting width • Programmable control • Large stainless-steel work tables • Side tables • Waste/trim removal system • Conveyor system • Baumann material handling equipment • Baumann unloading equipment • Baumann jogging equipment • 4 cutting knives included The waste disposal/conveyor equipment is stated to date from approximately 2017. _____ BAUMANN PERIPHERAL EQUIPMENT The cutting system is complemented by professional Baumann handling equipment. Baumann Unit – Type BA 3N According to the machine plate: • Manufacturer: Heinrich Baumann • Type: BA 3N • Machine No.: 1322 • Voltage: 400 V / 3N~ • Frequency: 50 Hz • Rated current: 9 A • Power: 3 kW • Stated load: 1,000 N • Made in Germany The exact year is not shown on the visible nameplate. Unloading Equipment The owner states that the unloading unit is approximately 10 years older than the main cutting machine. Jogging Table The owner states that the Baumann jogging equipment is approximately 20 years older than the main cutting machine. These age indications are based on information supplied by the machine owner and should therefore be considered approximate. _____ INCLUDED TOOLING A particularly useful part of the package is the knife set: 4 x cutting knives included This reduces the buyer's initial need for additional cutting tools and provides spare knife capacity for ongoing production. _____ WHY BUY THIS CUTTING LINE? Complete Production Package Instead of purchasing only a stand-alone guillotine, the buyer receives a complete cutting and material-handling solution with peripheral equipment. Proven German Technology Baumann and Wohlenberg equipment is widely used in professional printing and finishing operations and is known for its robust mechanical construction. 920 mm Production Class The 92 cm cutting format is highly versatile and suitable for a wide range of commercial printing, digital printing, bookbinding and finishing applications. Material Handling Included The additional Baumann equipment can significantly improve workflow compared with operating a stand-alone cutting machine. Nodpfx Acez Ei D De Aodb Waste Handling & Conveyors Integrated peripheral systems help reduce manual handling around the cutting process and improve production organization. Four Knives Included _____ SUITABLE APPLICATIONS The system can be used for: • Commercial print finishing • Digital print finishing • Bookbinding • Brochures and catalogues • Sheet cutting • Printed paper • Cardboard and light board applications • Short- and medium-run finishing • General post-press production _____ FGT VALUE – MORE THAN JUST A MACHINE Purchasing used graphic machinery internationally involves more than simply buying equipment. FGT Graphic Machinery can support the complete project from inspection through delivery. Our services can include: • Technical machine evaluation • Inspection coordination • Machine demonstration • Professional dismantling • Preparation for transport • Packing • Loading • International truck transport • Sea freight • Export documentation • Customs preparation • Installation coordination • Technical support _____

Condition: used, Year of construction: 1998, Year: 1998 Condition: functional Ndsdpfoz Eh Uhsx Ac Ajb Technical Specifications: - Maximum cutting width: 780 mm - Maximum cutting depth: 780 mm - Maximum pile height / clamp opening: 120 mm - Clamping force: 150–3,000 daN - Knife speed: 45 cuts/min - Backgauge speed: up to 300 mm/s - Minimum automatic cut without false clamp plate: 20 mm - Minimum automatic cut with false clamp plate: 70 mm - Working table height: 900 mm - Front table depth: 650 mm - Weight: approx. 1,300 kg

Condition: used, Year of construction: 2011, Three knife trimmer Kolbus HD 143.P Year: 2011 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Counter: 12.560.000 books Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): (4-18) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Max. mechanical speed: 7.500 single products/hour or 4,200 single products/hour from 40 mm product thickness on Maximum size (cutted): 305 x 420 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum size (uncutted): 320 x 450 x 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer! Nedpoz Eaq Ijfx Ac Asdb

Condition: used, Year of construction: 2011, Baumann Wohlenberg cutting system 92-series cutting machine with chip removal and conveyor belts from 2017 The unloader is about 10 years older than the machine The vibrating table is about 20 years older than the machine The package includes a total of 4 blades All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Nodez D Dmqopfx Ac Aodb Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2006, functionality: fully functional, 1 Polar Mohr paper cutting machine Model: 115 XT Year of manufacture: 2006 Light barriers Nsdpfx Acez Dvxxj Ajdb Side tables Location: Austria Available: immediately, by arrangement

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 133365 40, Maximum size: 510 x 310 mm (or 510 x 310 x 60 mm) Minimum size: 140 x 100 mm (or minimum trimmed width of 70 mm) Book/book block thickness: Max. 60 mm, min. 3 mm Ndodpfx Aoz Dfnioc Ajb Production speed: Max. 12,000 cycles per hour Cover size: Max. 642 mm, min. 203 mm Equipment: Touchscreen control panel, motorized size adjustment, cutting cassettes, and central lubrication Well-maintained machine currently in production. Prior to sale, the machine will be dismantled and prepared for delivery. Please do not hesitate to contact us for more information.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, STC-Ref:G-071-2403 Polar 92-X, Year: 2004, total cuttings: 1,8 mio. format: 0x920 mm equipped: - monitor Nedpfoz Azt Uox Ac Asdb - photo-cell - rear table guard - datastore for programmes - airtable at right side --> available: 12/2026

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 560 mm, insertion height: 80 mm, table height: 900 mm, cutting length (max.): 560 mm, overall weight: 575 kg, type of input current: three-phase, total width: 1,670 mm, total height: 1,500 mm, working width: 2,400 mm, total length: 1,150 mm, input voltage: 400 V, table width: 2,400 mm, input frequency: 50 Hz, lifting height: 80 mm, Equipment: documentation/manual, safety light barrier, The (POLAR) Mohr D 56 ECO is a robust, hydraulically powered paper cutting machine. The machine is supplied with an original POLAR spare blade, hydraulic oil, a blade changing kit, grease gun, and various other tools. Tables on the left and right sides are optional. If desired, these can be disassembled, for example, when space is limited. - Model: (POLAR) Mohr D56 ECO - Type: hydraulic paper cutting machine - Cutting width: 560 mm - Table depth: 560 mm - Maximum feed height: 80 mm - Clamping force: 200–1,200 daN - Rear gauge speed: 70 mm/sec - Smallest automatic cut without spacer: 15 mm - Smallest automatic cut with spacer: 50 mm Ndjdjz Aq D Nspfx Ac Ajb - Control: 5.5" monochrome display with membrane keypad - Memory: maximum 198 programs - Hydraulic, precise, and material-friendly swing cut - Adjustable clamping pressure and pre-clamping time - LED marking of the cutting line - Smooth stainless steel table surface for easy material transport - Simple blade change and fine adjustment at the front Dimensions (W × D × H): 1,150 × 1,670 × 1,500 mm This machine has been inspected and thoroughly tested by our own specialized technical department. If you require any further information, please do not hesitate to contact us. Worldwide shipping is possible.

Condition: excellent (used), Year of construction: 2020, Ref: 11147 . 2020 Horizon HT-80 Three-Knife Trimmer Fully automatic three-knife trimmer designed for short-to-medium-run and digital/book-of-one production. Can work offline or inline with Horizon binders up to 1,000 cycles/hour, 51 mm book thickness, automatic setup and book-of-one capability Features: Automatic size setup via colour touchscreen: input the untrimmed and finished book dimensions and the machine automatically positions the relevant sections. Servo-controlled jogging and clamping provide accurate registration, while the swing-knife cutting action is designed to give a clean three-side trim. Also capable of book-of-one production. Ndedsz Akmkepfx Ac Ajb Books of the same finished size but different thicknesses can be processed consecutively It can run inline with Horizon BQ-470, SB-07 and SB-09S systems, as well as offline. Specification: Untrimmed book size – Max. 330 × 330 mm Untrimmed book size – Min. 145 × 105 mm Finished book size – Max. 300 × 300 mm Finished book size – Min. 139 × 99 mm Book / trim thickness: 1–51 mm Maximum head & foot trim: 30 mm each Maximum fore-edge trim: 30 mm Production speed: 400–1,000 cycles/hour Clamping pressure: 4–8 kN, up to 10 kN depending on conditions Clamp drive: Servo motor Standard formats: A4, A5, 8.5 × 11", 5.5 × 8.5" Job memory: 200 jobs Dimensions: 1,610 × 2,610 × 1,515 mm W × D × H Power: 3-phase, 200–230 V, 50/60 Hz; 380/400/415 V versions via transformer

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 5911143, Equipment: safety light barrier, For sale is an absolutely reliable and immediately operational Polar Mohr 92 EM-Monitor high-speed cutter from 1989 (serial number: 5911143). The machine is in very good, well-maintained condition and has been operating flawlessly until recently. Technical data & highlights: Njdpjz Ahrqsfx Ac Aodb Model: Polar 92 EM-Monitor with digital program display Cutting width: 920 mm Application: Ideal for professional printing companies, digital printing, and post-processing (B2 format) Condition & scope of delivery: Safety: The optical light barrier (light curtain) functions perfectly and meets UVV safety requirements. Table: Chrome-plated air table in flawless condition (blower operates powerfully). Blade: 1 machine blade mounted + 1 additional spare blade (newly sharpened) included in the delivery. Accessories: Complete with original blade changing tool, tool set, and complete documentation / operating manual.

Condition: excellent (used), Year of construction: 2021, operating hours: 700 h, functionality: fully functional, Flexor 380B Mono Film and paper cutting machine Material web width: 380 mm Nodpfx Acoz Ag Nbo Asdb Unwinding diameter: 800 mm Rewinding diameter: 1 x 500 mm Standard rewinding mandrel diameter: 76 mm Machine will be inspected at the factory.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, 1x Professional high-volume shredder from Ideal, model: 4606 CC, security level: P-5 - with oiler. Nsdozz R E Dopfx Ac Asdb Used only a few times! In very good, fully functional condition, manufactured in 2024. Price quoted net, plus VAT. Shipping possible upon request, subject to an additional charge.

Condition: used, Year of construction: 2015, functionality: fully functional, cutting width (max.): 3,210 mm, cutting length (max.): 3,200 mm, overall weight: 1,945 kg, type of input current: three-phase, total width: 3,920 mm, working width: 3,210 mm, total length: 5,100 mm, input voltage: 400 V, input frequency: 50 Hz, The Kongsberg C64 is a used digital cutting table manufactured in 2015. It is in good working condition and has been regularly serviced by an authorized distributor. With a working area of 3,210 × 3,200 mm, it is designed for precise cutting, milling and finishing of large-format materials. Njdpfx Aezz Igxec Ajdb The machine is equipped with a 3 kW milling unit, an i-camera system, eight vacuum zones, a workstation, the QuickRelease system and a range of tools for cutting, milling, V-notching and processing self-adhesive vinyl. The machine is sold without a conveyor system and is in good working condition.

Condition: good (used), Polar Mohr 92 X paper cutting guillotine The machine is in very good condition, ready for production, after inspection. It is the most valued brand among guillotines, a flagship product. Technical data: Cutting width: 920mm Stack height: 130mm Programmer with 15″ color display Air table Photocells Chrome table surface Rear crest ball screw Optical cutting line Side tables enlarged Replacing the knife from the desktop Weight: 2000kg Power supply 380V Documentation included Ndsdpezz Hhzsfx Ac Aeb

Condition: good (used), Polar Mohr TR 1EL 145-3 Transomat Paper Stacker The machine is ready to use. This is the most popular design from the German manufacturer. The Transomat can be placed on the left side of the guillotine. Weight: 1600 kg Nedpfx Aozz Hhujc Ajdb Power supply: 400 V Control panel. Air table. Chrome-plated table surface

Condition: good (used), Baumann Perfecta 115 Paper Cutting Machine The machine is in perfect condition and ready for production. Year of manufacture: 2021. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Baumann Perfecta premium cutting machines are manufactured in Balingen, Germany. Distinguishing Features of the Baumann Perfecta Machine: – Interactive User Interface Nodpfezz Hhnsx Ac Ajdb – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: good (used), Polar Mohr 137 XT Autotrim Paper Cutting Guillotine The machine is fully functional and in very good condition. Reviewed and ready to use. This is the most respected guillotine brand, a flagship product. Technical specifications: Cutting width: 1370mm Stack height: 165mm Programmer with touchscreen display Autotrim – a split front table for removing trim Includes the original steel basket. Comb cutting adjustment from the machine’s control panel Air knife for blowing small debris off the knife Air table Photocells Chrome table surface Ball screw drive for the rear comb Servo-driven saddle control for very fast operation Optical cutting line Enlarged side tables Additional rear table guards Weight: 4500 kg 380V power supply Includes documentation, a tool kit, a safety knife change tool, a tapping block, a spare knife, and one machine knife. Ndedpfezz Hhhox Ac Asb

Condition: good (used), Wohlenberg 115CutTec Paper Cutting Guillotine Machine in very good condition, ready for production. Available immediately from stock. Description: – Color screen – Handwheel positioning – Optimized cutting cycle – Continuously adjustable clamping pressure – Quick knife change – One-piece machine body = increased stability Technical specifications: Cutting length: 1150 mm Maximum stack height: 165 mm Nedpfxezz Hhbo Ac Asdb Infeed depth: 1150 mm Minimum cutting width with sheet metal under the pressure beam: 97 mm Minimum cutting width without sheet metal under the pressure beam: 30 mm Net weight: 3100 kg

Condition: used, Guillotine with Jogger Wohlenberg 137 CUT-TEC Nodpfjzzytwsx Ac Asdb Schneidmaschine mit Rüttler / Guillotine with Jogger Wohlenberg 137 CUT-TEC Year 2002 - Serial-No. 3834-006 Schnittbreite / Cutting width max. 1370mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table große-Luft-Seitentische / large airbed side tables Lichtschranke / Light guards Ersatzmesser / Spare knives CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2016, Esko Kongsberg V24P plotter Size: 1700 x 3200 mm Router: 45000 RPM Ndjdpfozzrm Nox Ac Aob Processing flexible and rigid sheets including acrylics, synthetics, and DiBond Very good working condition

Condition: used, Year of construction: 2026, Built in 2006-2008 Specification: Maximum Cutting Width: 1,850 mm (72.8 in) Maximum Backgauge / Feeding Depth: up to 2,100 mm (82.7 in) Maximum Cutting Height (Stack Height): 160–165 mm (6.3–6.5 in) Minimum Automatic Cut: With false clamp plate: 99 mm (3.9 in) Without false clamp plate: 35 mm (1.4 in) Cutting Speed: up to 42 cuts per minute Clamping Pressure: Minimum: 4 kN Maximum: 60 kN Equipment fully automatic jogging system BASA 7 year 2008 Transport and transfer systems Rear loading system Nodpszyl S Aefx Ac Asdb Unloader BA 7

Condition: used, Year of construction: 2017, operating hours: 1,113 h, machine/vehicle number: G30XL320839, The machine would be serviced by Zünd Spain! TECHNICAL DETAILS Zünd G3 XL-3200 Plotter Vacuum system: 1–9 kW Tool heads Universal tool head UM-ZS G3, working width: 60 mm Universal tool head UM-ZP G3, working width: 60 mm Operating hours: 1,113 h EQUIPMENT Zünd G3 XL-3200 Plotter, item no. 6343200 Ndsdjzyktlepfx Ac Asb G3 Vacuum system, CIC, item no. 6438104 ICC camera for S3/G3, item no. 6539101 UM-ZS G3 Universal tool head, item no. 6531006 UM-ZP G3 Universal tool head, item no. 6531007 Universal cutting tool (UCT), item no. 6532001 EOT-250 Oscillating tool, G3, item no. 6532018 V-CUT tool, G3, item no. 6532021 Creasing tool type 1 (CTT1), item no. 6532051 Creasing tool type 3 (CTT3), item no. 6532053 Zünd Cut Center software package, item no. 6731200 Zünd Cut Center camera option, item no. 6731250 Zünd Cut Center V-Cut option, item no. 6731240 PC and monitor for Zünd Shipping costs for the plotter