Salm KG

Condition: used, empty load weight: 8,280 kg, axle configuration: 3 axles, first registration: 06/2025, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2025, ref: F1201805 Equipment: * Air connection: Red/Yellow head * Electrical connection: 1 x 15-pin + 2 x 7-pin * ABS * EBS * Side impact protection * Lift axle: 1 * Toolbox: 2 * Rear door design: Rear portal doors * Locking rods on rear doors: 4 * Floor: Plywood floor * Double-deck system * Double-deck beams: 22 * Side walls with keyhole profile VIN: WKESD000001201805 Tire size: 385-65 R22.5 Internal length: 13.62m Width: 2.55m Internal width: 2.48m Codpfx As Ah Ucdsp Djhd Height: 4m Internal height: 2.72m

Condition: used, empty load weight: 8,580 kg, axle configuration: 3 axles, first registration: 08/2018, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2018, mileage: 458,651 km, ref: F0845894 Equipment: * Cooling unit, * Temperature recorder, * Air connection: Red/Yellow connector, * Power connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, Cedpfx Apj Ah Uchs Djhd * Ferry lashing points, * Pallet box: 36 pallets, * Hour meter, * Toolbox: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Floor: Aluminum floor, * Double-deck system, * Double-deck beams: 22, * Flower width VIN: WKESD00000845894 Tire size: 385-65 R22.5 Internal length: 13.31m Width: 2.6m Internal width: 2.5m Height: 4.02m Internal height: 2.65m

Condition: used, mileage: 33,230 km, power: 75 kW (101.97 HP), first registration: 02/2024, fuel type: gasoline, empty load weight: 1,400 kg, maximum load weight: 455 kg, overall weight: 1,973 kg, axle configuration: 4x2, wheelbase: 2,716 mm, next inspection (TÜV): 11/2028, fuel: super 95, energy efficiency: D, CO₂ emissions: 157 g/km, fuel consumption (combined): 6.9 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 4,500 mm, total width: 2,160 mm, total height: 1,840 mm, loading space volume: 3 m³, loading space length: 1,806 mm, loading space width: 1,524 mm, loading space height: 1,256 mm, Year of construction: 2023, maximum speed: 168 km/h, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), navigation system, onboard computer, parking sensors, seat heater, second-hand vehicle warranty, sliding door, soot filter, traction control, Exterior * Interior lining of the cargo area up to the roof height * Sliding door, right side * All-season tires * Spare wheel Interior * Seat heating for driver and front passenger * Air conditioning * Glove compartment, passenger side, closed * Full partition Safety * Seatbelt warning system for driver and front passenger seat * Electronic Stability Program (ESP) * Airbag for driver and front passenger * Braking system with ABS and ASR Comfort and Environment * Rear view camera * Rear door, two-leaf, 180 degrees * Attention Assist * Hill-start assist * ECO Start-Stop function * Particulate filter * Mercedes-Benz emergency call system * Multifunction steering wheel * Cruise control * Light and rain sensor Multimedia * Live Traffic Information * Instrument cluster (pixel matrix display) * Digital radio (DAB) with Bluetooth hands-free system Equipment lines and packages * Navigation package Condition/Documents * COC papers Other * 6-speed manual transmission * Sliding door rail cover in vehicle color * Storage compartment on the dashboard * Arctic white * Armrest with storage compartment * Exterior mirrors, electrically foldable and adjustable * Front passenger seat, height adjustable * Turn signals in exterior mirrors, halogen technology * Digital extra: 3 years of free map updates * Digital extra: Extended MBUX functions * Digital extra: Hard drive navigation * Digital extra: MBUX Navigation Plus * Digital extra: Remote Services Plus * Digital extra: Smartphone Integration * Emission class Euro 6d-TEMP * Driver's seat, height adjustable with lumbar support * Front power windows with comfort operation * Windshield with heat-insulating glass * Weight variant 1,973 kg * Door handle strip, black, textured * Wooden floor in the cargo area * i-Size child seat attachment * Interior lighting LED, front * Interior lighting in LED technology * Communication module (LTE) for digital services * Plastic floor in the front passenger compartment Codpfxj Ah Ub Is Ap Dshd * Cargo area lighting in LED technology * Steering wheel adjustable for tilt and height * MBUX multimedia system including navigation & DAB * Center armrest and door panels, black, textured * Engine M 200.73 13 LA 75 kW (102 hp) * Wheelbase 2,716 mm * Signage / Printed materials in German * Smartphone holder * Initial running distance, maintenance interval 30,000 km/2 years * Fabric Norwich Black * Thorax side airbags and window airbags, front * Door handles painted in vehicle color * First-aid kit * Preparation for roof rails * Preparation for digital extras * Warning triangle * Windshield washer fluid reservoir with standard volume * Heat-insulating glass all around * Vehicle registration certificate, Part II Other: * Nationwide delivery for €399 net plus VAT (€474.81 incl. VAT) * For all vans: On request, a 12 or 24-month Mercedes-Benz used car warranty is possible. * We will gladly take back your current vehicle, offset it against the new vehicle or pay you the purchase price. * Leasing / financing via Mercedes-Benz Bank. We will be happy to prepare an offer for you. * No liability for printing and typographical errors * Errors and prior sale excepted

Condition: used, mileage: 137,100 km, power: 130 kW (176.75 HP), first registration: 12/2009, fuel type: diesel, empty load weight: 5,470 kg, maximum load weight: 2,020 kg, overall weight: 7,490 kg, tire size: 235/75 R 17,5, axle configuration: 4x2, wheelbase: 3,320 mm, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 3, loading space length: 3,800 mm, loading space width: 2,300 mm, loading space height: 400 mm, Equipment: ABS, cabin, crane, differential lock, trailer coupling, Vehicle location: en route / in transit, steel body, short cab, suspension seat, double bench seat, rear window, electric mirrors, sun visor, radio/CD player, 6-speed gearbox, ABS (anti-lock braking system), differential lock, rotating beacon, leaf spring suspension, trailer coupling with air and electrical connections, lashing eyes, crane behind the cab, emergency stop, foldable, 2-point mechanical support, 2x hydraulic outriggers, green environmental badge. Wheelbase: 3320 mm, body: Meiller 3-S steel tipper, steel sideboards, foldable, spring-relieving, Fassi crane 50 A.2, foldable, at 6.30 - 680 kg, load chart: 2m - 2,220kg, 2.30m - 1,925kg, 3.65m - 1,250kg, 5m - 905kg, 6.3m - 680kg, hook operation, disc brakes on front and rear axles, middle seat, data subject to change as the vehicle is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Chsdpfx Ae Ah Ub Dep Ded

Condition: used, Year of construction: 2003, color: blue, loading space volume: 5 m³, loading space width: 2,000 mm, loading space length: 4,450 mm, loading space height: 600 mm, mileage: 1,001 km, first registration: 01/2003, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel body, doors. Body: Roll-off container with double doors, approx. 5.3 m³. The exact year of manufacture cannot be determined as the identification plate is no longer present! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Chjdpj Ah Ubyofx Ap Djd

Condition: used, Year of construction: 2019, Vutek GS 2000 LXP LED Ultradrop Year of manufacture: 2018 (installed in 2019) Resolution: 7 pl - 1000 dpi Colors: 8 colors + white Speed: up to 227 m²/h Print width: Plate/Roll media: 205 cm Good condition Cedpfxe Ah Ubvs Ap Dshd efi Fiery server

Condition: excellent (used), mileage: 654,821 km, power: 152 kW (206.66 HP), first registration: 05/2016, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,850 mm, total width: 2,600 mm, total height: 3,780 mm, loading space length: 7,510 mm, loading space height: 2,400 mm, Equipment: AdBlue, tail-lift, Despite our best efforts to ensure the data is entered correctly, we cannot be held responsible for any errors in this listing. Images may differ from the actual product. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino Refrigeration unit brand: Thermo King = Further information = General information Year of construction: 2016 Technical information Engine displacement: 9,291 cc Front axle: Steered; Suspension: Leaf spring suspension Rear axle: Twin tires; Suspension: Air suspension Weights Unladen weight: 11,318 kg Payload: 7,682 kg Chodo Ah Ubropfx Ap Ded GVW: 19,000 kg Functional features Tail lift: Dhollandia, under-ride guard Refrigeration engine: Diesel and electric Condition Technical condition: very good Optical condition: very good Further information Please contact Thierry Leemans for more information.

Condition: used, For sale: ABB DMI250V industrial DC electric motor, originally designed for shear and cutter applications. Technical specifications: • Manufacturer: ABB • Model: DMI250V • Year of manufacture: 2007 • Rated power: 241 kW Codps Ah Ubnjfx Ap Dohd • Rated voltage: 439 V DC • Rated current: 608 A • Rated speed: 666 rpm • Excitation voltage: 220 V • Excitation current: 26.2 A • Duty cycle: S1 • Protection class: IP54 • Insulation class: H (200) • Cooling method: IC86W • Mounting arrangement: IM1001 • Weight: 1,560 kg • Serial number: 8739842 Condition: Used industrial motor. Not electrically tested by us. Offered in its current condition, as shown in the photographs. Location: Rotterdam, The Netherlands Delivery: EXW Rotterdam Inspection by appointment is possible. Please contact us for further information.

Condition: used, Year of construction: 2011, travel -x axis 850 mm travel -y axis 700 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 turning speeds 10.000 U/min numbers of positions in the tool changer 38 tool taper SK40 5-axis simultaneous machining center | HERMLE - C 40 U equipped with internal coolant supply (80 bar), a 38-tool changer, a swivel axis, and a rotary table (ø 800). Chodpfxs Ah Uabe Ap Ded Additional equipment: - Swivel axis - rotary table (ø 800) - Blum Tool breakage control / -measurement The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 40 | C40 | C-40 | C40U

Condition: used, mileage: 755,822 km, power: 302 kW (410.61 HP), first registration: 03/2016, fuel type: diesel, empty load weight: 8,980 kg, maximum load weight: 17,020 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,700 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, spoiler, traction control, trailer coupling, * German vehicle * Condition, see photos * High Line cab with 2 beds and 2 seats * Retarder * Body: BDF interchangeable system * Suitable for all containers up to 7.82 m * Twist lock * Trailer coupling * Trailer load 24,000 kg * Total weight 60,000 kg * Driver's seat, comfort, air-suspended * Seat heating * Automatic climate control * Refrigerator * Auxiliary heater * Automatic transmission Chedpfx Ao Ah T U Njp Djd * ABS + ESP + EBS * Lane keeping assist * Adaptive cruise control * Hill start assist * Liftable trailing axle + raise/lower * Multifunction steering wheel * Differential lock * Air suspension * Electric sunroof, glass * Roof spoiler * Fog lamps * Electric windows * Electrically adjustable and heated mirrors * Central locking with remote control * On-board computer * Radio CD * Wheelbase 4,700 mm + 1,350 mm * Gross vehicle weight 26,000 kg * Unladen weight 8,980 kg * Payload 17,020 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, a new DGUV inspection, a new SP inspection, or a new UVV inspection. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that there are no false impressions about the condition and suitability on the part of the buyer. Inspections and examinations are possible and expressly desired at any time by prior appointment. All information is provided without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: used, Year of construction: 2006, travel -x axis 2.000 mm travel -y axis 620 mm travel -z axis 520 mm numbers of positions in the tool changer 56 tool adaptor SK40 5-axis machining center | HEDELIUS - RS60 Magnum KM2000 equipped with shuttle operation, rotating swivel turntable and chip conveyor. Please note that the technical details were added from comparable machines. The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chjdpfs Ah T U Tsx Ap Ded #Tags: RS60 KM2000 | RS-60 | RS 60

Condition: used, Tenoning spindle 1 Stk. Number of milling agregates 3 St. Spindle diameter 50 mm SCM Dogma Window Production Line For sale on behalf of a customer ----- Manufacturer’s Technical Description: Item 1 Tenoning Machine Worktable height = 990 mm Carriage for longitudinal machining: - Driven by a motor with numerical control - Stroke = 750 mm - Speed = 12 m/min - Max. acceleration = 2.5 m/s² Carriage for transverse machining: - Driven by a motor with numerical control - Stroke = 1600 mm - Max. speed = 12 m/min - Max. acceleration = 2.5 m/s² Left stop for aligning the workpiece during the loading phase: - Integrated into the auxiliary support bridge Crosscut unit (1TR): - Power = 4 kW (5.5 PS) - Rotational speed = 3,000 rpm - Outer diameter of the tool = 400 mm - Diameter of the tool bore = 80 mm - Fixed horizontal positioning - Vertical positioning with pneumatic on/off mechanism - In position 1 - Power = 15 kW - Rotational speed = 3,500 rpm - Shaft diameter = 50 mm - Shaft length = 320 mm - Max. tool diameter = 320 mm (optional: 370 mm) - Vertical stroke = -15 to +300 mm - Maximum reach of chip guard = 55 mm - Positioning: horizontal = fixed - Positioning: vertical = motor with numerical control - In position 2 Item 2: Profiling Machine: 1. Profile Milling Unit (1VD): - Power = 7.5 kW (10 HP) - Rotational speed = 6,000 rpm with bidirectional rotation - Shaft diameter = 50 mm - Shaft length = 320 mm - Max. tool diameter = 240 mm - Vertical stroke = -15 to +300 - Positioning: horizontal = pneumatic on/off with 5-position turret stop and time-controlled engagement - Positioning: vertical = motor with numerical control - in position 3 Work table height = 870 mm 2. Profile Milling Unit (2VD): - Power = 7.5 kW (10 HP) - Rotational speed = 6,000 rpm - Shaft diameter = 50 mm - Shaft length = 320 mm - Max. tool diameter = 240 mm - Vertical stroke = -15 to +300 - Positioning: horizontal = pneumatic on/off with 5-position turret stop - Positioning: vertical = motor with numerical control - in position 4 3. DUO Unit: Device for cutting out the glazing bead (in the horizontal position) and/or grooving unit (in the vertical position, RL/SF) (in position 5) It includes: > 1 glazing bead removal unit with: - Power = 3 kW - Rotational speed = 6,000 rpm - Shaft diameter = 30 mm - Shaft length = 25 mm - Tools mounted on a quill > 1 grooving unit: Cedpfx Apj Ah T U Eo Dohd - Rotational speed = 9,000 rpm with belt drive - Shaft with centering diameter = 50 mm, L = 3 mm for securing the tool with 3 M8 screws spaced 120° apart - Tool diameter = 146 + 2 (max. diameter = 154) Tools: - Glass retainer strip cutting saws: inner diameter = 50 mm; outer diameter = 200 mm; for mounting on the quill with 6 M6 screws spaced at 60° - Gear-cutting cutters, inner diameter = 50 mm; outer diameter = 240 mm; for mounting on the quill with 6 M6 screws at 60° All tools for the dual function are mounted on the unit simultaneously, and the function is switched by rotating the unit 90° Positioning: - Rotational = pneumatic on/off - Axial = manual - Radial = pneumatic on/off with 5-position turret stop Feeding mechanism: - Wheel diameter = 110 mm - Wheelbase = 150 mm - Feed speed = 6 m/min (fixed) - Vertical positioning = manual with mechanical dimension indicator Positioning guides Right: - Ia = manual - IIa = pneumatic on/off via ...

Condition: used, faceplate diameter 800 mm hollow 130 mm height 120 mm weight of the machine ca. 0,25 t dimensions of the machine ca. 1,2 x 0,8 x 0,3 m Face plate with short-taper mount, size 8, Cedpj Ah T Uzjfx Ap Djhd diameter 800 mm

Condition: used, sheet width 3100 mm plate thickness 6 mm distance between columns 3120 mm total power requirement 11 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 3,8 x 2,4 x 1,7 m Equipment: - Robust electro-hydraulic swing-beam shear - ELGO digital display (model P9521) for the electric backgauge - Backgauge travel range (X-axis) = 1120 mm - Backlash-free recirculating ball screw for the backgauge - Positioning speed: 100 mm/sec - 1x sturdy side gauge - Equipped with T-slot, flip-stop, and millimeter scale - 2x sturdy front support arms - Electric cutting length limitation - Cutting length limitation feature to increase the number of strokes per minute - Manual blade gap adjustment - Centrally operated from the right-hand side frame - Front support plates Chedps Ah T Uwsfx Ap Dsd - Front finger guard/safety barrier - Jog mode (inching) via push-buttons on the left-hand control panel - Protective fencing (safety enclosure) behind the machine - Light curtain - Pneumatic sheet support device

Condition: used, mileage: 110,000 km, power: 110 kW (149.56 HP), first registration: 02/2020, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 04/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 4,904 mm, total width: 1,904 mm, total height: 1,990 mm, loading space length: 2,440 mm, loading space height: 1,340 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Well-maintained VW T6.1 L1 panel van, with a 3.0t GVWR. Featuring optimal equipment, ideal for trades and businesses, e.g., as a service or workshop vehicle. Workshop interior by Sortimo and voltage converter (see below). Chsdpfx Ae Ah T Utep Dsd Tow hitch, 2.5t towing capacity Mounting rails for roof racks Chassis: Reinforced suspension, damping, and stabilizers (suitable for rough roads) Auxiliary heater for cab and cargo area (switchable, programmable) Climatic air conditioning with pollen filter Leather multifunction steering wheel Driver assistance systems: - PDC Park Distance Control rear, optical and acoustic display - Rear view camera - Cruise control with speed limiter - Front Assist environment monitoring system (distance warning, emergency brake assist, active) - Driver fatigue detection - Maneuvering brake function - Trailer stabilization - Brake assistant (HBA) - ABS, ASR, ESP Composition Colour audio system (touchscreen color display) - USB, Bluetooth audio, SD card - Hands-free system for mobile phone with Bluetooth - App Connect (also for navigation Apple CarPlay, Android Auto, Mirror Link) - Voice control for telephone Multifunction display Plus / trip computer Electrical package 1: - Electric windows - Electrically adjustable and heated exterior mirrors Central locking with remote control LED taillights Fog lights with cornering function Rotating beacon lights, detachable, 2x 2nd battery with separating relay Driver and passenger airbags Sliding door on the right side of the cargo area with tinted window Rear double doors with tinted windows, heated, with windshield wipers, opening angle 180 degrees Wheelbase 3000 mm Truck registration - N1 Adjustable steering wheel Comfort driver's seat with armrests on both sides, foldable, adjustable: - Seat height, backrest, lumbar support Adjustable passenger seat: backrest Durable seat covers Non-smoker package Cargo area equipment: Sortimo workshop interior (similar to Aluca, Bott, Würth). Shelves with storage compartments, shelf compartments, small parts containers, 9 drawers on both sides. Cargo area partition with window. Robust, plastic-coated wooden floor. Headliner. Side paneling. Load securing through eyelets and mounting rails. LED lighting. Ventilation and air conditioning. 2x 12V sockets. 230V / 1kVA voltage converter (inverter), powered by the auxiliary battery. Cargo area dimensions: - Length at the bottom: approx. 244 cm - Length in the middle: approx. 225 cm - Length at the top: approx. 220 cm - Height: approx. 134 cm Mounted tires: Winter tires 205/65 R 16 on steel rims with approximately 2 / 2 / 5 / 5 mm tread depth Additional tires: Summer tires 205/65 R 16 on steel rims with approximately 8 / 8 / 8 / 8 mm tread depth Maintenance history according to digital VW service record: 11.2021 / 25,455 km: Oil change 04.2022 / 32,841 km: Inspection, pollen filter 04.2023 / 55,212 km: Inspection + oil change, brake fluid change 04.2024 / 70,585 km: Inspection, pollen filter 06.2025 / 80,877 km: Insp. + oil change, brake fluid change 06.2026 / 104,312 km: Insp. + oil change, pollen filter, air filter Despite careful processing, input and data transmission errors may occur in the vehicle description including images. Errors and prior sale are reserved.

Condition: used, Year of construction: 2011, bar material dia. 32 mm spindle passage 38 mm turning length 320 mm turning speeds 8000 U/min c-axis 0,001 ° Grad gripping station 32 turning length 150 mm turning speeds 8000 U/min c-axis 0,001 ° Grad number of tools 4+7+6+10 =27 number of milling stations 4+4 control Mitsubishi M70 Number of axles 5+2x C Achse 7 St. load magazine FMB 3-36 total power requirement 7,5/5,5 kW weight of the machine ca. 3300 kg dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m Csdpfx Aj Ah T Upjp Dshd Citizen A32-VIIPL CNC swiss type lathe, manufactured in 2011 with FMB Turbo 3-36 loading magazine, In very good condition! Regularly serviced by Citizen Service. The machine has been operated in 3 shifts, 5 days a week. Several Citizen A32-VIIPL machines are available. Reason for sale: The project has now come to an end. We are also selling several Citizen A20-VIIPL machines. Year of manufacture: 2011 Reason for sale as above. Take this opportunity to enquire about package prices. Go to the Citizen A20-VIIPL page on the website. Accessories: 1x main and take-off spindle (diameter). 1x channel for FMB Standard chip container

Condition: used, Year of construction: 2021, turning diameter 42/200 mm Codpfxo Ah T Ule Ap Dehd turning length 430 mm control Fanuc 3li-B clamping chuck diameter 165 mm turret (x-stations) 2x12 travel -y axis 70 mm range L-W-H 2645 x 1645 x 1900 mm total power requirement 11/7,5 kW turning speeds 6000 U/min gripping station 42/200 mm load magazine Breuning IRCO SIMag chip conveyor Knoll kW coolant filtering unit Knoll kW total power requirement 11/7,5 kW weight of the machine ca. 6250 kg CNC Turning & Milling machine Miyano ANX 42 SYY

Condition: used, Year of construction: 2011, bar material dia. 20 mm spindle passage 34 mm turning length 200 mm turning speeds 10000 U/min c-axis 0,001 ° Grad gripping station 20 turning length 50 mm turning speeds 8000 U/min c-axis 0,001 ° Grad number of tools 9+7+4 =20 Chedpfo Ah T Uhsx Ap Ded number of milling stations 4 control Mitsubishi Meldas Number of axles 5+2x C Achse St. chip conveyor ja/yes Knoll Number of working hours 5000 h total power requirement 3,7 kW weight of the machine ca. 2.550 kg dimensions of the machine ca. 2,1 x 1,2 x 1,8 plus FMB m Citizen A20-VIIPL CNC swiss type lathe, built in 2011 with FMB Minimag 20 loading magazine, In very good condition! Regularly serviced by Citizen. The machine has been operated in 3 shifts, 5 days a week. Several Citizen A20-VIIPL machines are available. Reason for sale: The project has now come to an end. Several Citizen A32-VIIPL machines are also being sold. Year of manufacture: 2011 Reason for sale as above. Take this opportunity to enquire about package prices. Go to the Citizen A32-VIIPL page on the website Accessories: 1x main and take-off spindle (diameter). 1x channel for FMB Standard oil and chip containers Translated with (free version)

Condition: used, Year of construction: 2010, x-travel 2600 mm y-travel 1100 mm z-travel 900 mm control Heidenhain iTNC530 spindle turning speed range 0-10.000 U/min tool taper SK 50 Tool magazine slots 30 St./pcs. table surface area 3200 x 1100 mm max. table load 1200 kg rotary table dia. 1050 mm weight of the machine ca. 25550 kg Features/Accessories: -IKZ 40 bar -electric handwheel Cedps Ah T Udsfx Ap Dehd -technical documentation

Condition: used, input voltage: 24 V, type of input current: DC, B&R X20CP3585 PLC Control CPU Module – X20 System High-performance PLC central unit with an Intel Atom processor for industrial automation and control applications. Manufacturer: B&R Industrial Automation Model: X20CP3585 Series: X20 System Device Type: PLC Control / CPU Module Condition: Used Processor: Intel Atom E640T Cedpfx Apo Ah T Uae Dshd Processor Clock Speed: 1 GHz Working Memory: 256 MB DDR2-SDRAM User RAM: 1 MB SRAM L2 Cache: 512 kB Retentive Variables: Max. 256 kB Program Memory: CompactFlash slot Integrated I/O Processor: Yes Interfaces: 1x RS232, 1x Ethernet, 1x POWERLINK, 2x USB, 1x X2X Link Ethernet: 10/100/1000 Mbps POWERLINK: V1/V2, 100 Mbps USB: 2x USB 1.1/2.0 Type A RS232: Max. 115.2 kbit/s Expansion Slots: 3 for X20 interface modules Shortest Task Class Cycle Time: 200 µs Typical Instruction Cycle Time: 0.0044 µs Controller Redundancy: Supported Supply Voltage: 24 V DC (-15 % / +20 %) Power Consumption: 8.8 W (without interface modules and USB) Cooling: Fanless Operating Temperature: -25 to +60 °C in horizontal mounting position Protection Class: IP20 Dimensions (W x H x D): 200 x 99 x 85 mm Weight: Approx. 470 g

Condition: used, Year of construction: 1977, workpiece weight max. 2500 kg Cjdpfx Ao Ah T T Sep Dehd tool taper SK 40 boring spindle diameter 90 mm Diameter of the milling spindle tool holder 184,15 mm Length movement of the table 800 mm table cross movement 1000 mm Clamping surface of the table 1.000 x 1.120 mm table rotation 360 ° T-slot - width 22 mm T - slots distance 140 mm weight of the machine ca. 9,0 t dimensions of the machine ca. ca. 5,3 x 3,2 x 2,7 m m

Condition: excellent (used), mileage: 864,069 km, power: 164 kW (222.98 HP), first registration: 04/2016, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,600 mm, total width: 2,600 mm, total height: 3,550 mm, loading space length: 7,300 mm, loading space width: 2,420 mm, loading space height: 2,300 mm, Equipment: AdBlue, tail-lift, Despite careful attention to the accurate input of data, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual product. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino = Further Information = General Information Year of construction: 2016 Technical Information Engine displacement: 6,700 cc Front axle: Steered; Suspension: Leaf spring Csds Ah T T Iopfx Ap Dehd Rear axle: Double tires; Suspension: Air suspension Weights Unladen weight: 7,249 kg Payload: 4,741 kg GVW: 11,990 kg Functional Tail lift: Dhollandia, tailgate Condition Technical condition: very good Optical condition: very good Further Information Please contact Thierry Leemans for more information.

Condition: used, Year of construction: 2002, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 9,500 kg, spindle speed (max.): 36,000 rpm, spindle nose: HSK E50, number of slots in tool magazine: 30, Equipment: chip conveyor, Machining Center - Vertical Manufacturer: MIKRON Type: HSM 800 Year of manufacture: 2002 Control system: Heidenhain iTNC 530 Codpo Ah T Tyofx Ap Dehd Technical specifications: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle speed: 36,000 rpm Tool holder: HSK E50 Number of tool stations: 30 Machine weight: approx. 9,500 kg Condition: used Technical features & accessories: - Workpiece magazine with 4 stations - Chip conveyor - Oil mist/air filtration system - Water chiller Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, functionality: fully functional, Keithley 3706A System Switch / Digital Multimeter – 7.5-digit measurement and data acquisition system Modular switching and measurement system with an integrated high-performance digital multimeter for automated testing, measurement, and data acquisition applications. Manufacturer: Keithley Instruments Model: 3706A Series: 3700A Device Type: System Switch / Digital Multimeter Measurement Resolution: 7.5 digits Number of Module Slots: 6 Maximum Number of Channels: 576 two-wire multiplexer channels (with appropriate module configuration) Measurement Functions: DC voltage, AC voltage, DC current, AC current, resistance, frequency, and temperature DC Voltage Measurement Range: 100 mV to 300 V DC Current Measurement Range: Up to 3 A Resistance Measurement: 2-wire and 4-wire methods Measurement Speed: Over 14,000 readings/s Interfaces: USB, LAN (LXI), GPIB Codpfx Apo Ah T Tvj Dehd Additional Interfaces: TSP-Link, digital inputs/outputs Control: Integrated Test Script Processor (TSP) Supply Voltage: 100–240 V AC Supply Frequency: 50/60 Hz Maximum Power Consumption: 140 VA with six modules installed Form Factor: 19-inch rack unit, 2U Dimensions (W x H x D): 483 x 89 x 457 mm

Year of construction: 2024, condition: new, For sale: Masoneilan Camflex II industrial control valve, equipped with a pneumatic actuator and an ABB PositionMaster EDP300 digital valve positioner. Manufactured in 2024, this assembly is suitable for industrial process control applications. Valve specifications: * Manufacturer: Masoneilan / Baker Hughes * Model: Camflex II 35-35112 * Valve type: Rotary control valve * Year of manufacture: 2024 * Nominal size: DN50 / 2” * Pressure class: ASME Class 300 * Body material: ASTM A216 WCC * Flow characteristic: Linear * Cv: 50 * Fail position: Closed * Serial number: N-24-006659 * ATEX-rated actuator Positioner specifications: * Manufacturer: ABB * Model: PositionMaster EDP300 * Type: EDP300 B1H1S2C D1F2S3 * Control signal: 4–20 mA * Communication: HART * Protection class: IP65 * Pneumatic output: Single-acting * Year of manufacture: 2024 Included: * Masoneilan Camflex II control valve * Pneumatic actuator * ABB EDP300 digital positioner * Air pressure regulator * Available manufacturer documentation and inspection certificate Condition: Surplus equipment, offered as shown in the photographs. Operational condition has not been verified. Location: Rotterdam, The Netherlands Delivery: EXW Rotterdam Please contact us for further information or additional photographs. Chedpfxj Ah T Trs Ap Dod