Pacoma GmbH

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2001. This Monforts RNC 400 A features a swing over bed of 410 mm and a turning length of 600 mm. It is equipped with a 12-position disc turret and a powerful three-phase induction motor with a speed range of 30-4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 A machine we have for sale. Contact us for further details. • Swing over bed: 410 mm • Swing over radial slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Bar capacity/material clearance: 65 mm • Main drive: Three-phase induction motor (100% ED/40% ED), 20.5/30 kW • Max. torque: 500 Nm • Feed drive: Three-phase servo drives with electronic safety monitoring • Rapid traverse (X/Z): 24/24 m/min • Feed force (X/Z): 7.2/10.7 kN • Tailstock: On separate guideway, manual clamping, 900 mm travel, 90 mm quill stroke, 12,000 N force • Tool turret: 12-position disc turret, DIN 69880 / VDI 3425/2, 40 mm shaft diameter (VDI 40), directional logic and plane gear positioning • Hydraulics: Central pressure oil supply for hydrostatics and clamping; hydraulic hollow clamping device (max 65 mm) • Coolant system: 310 L tank, 3 bar, 40 L/min • Control and features: 256 kB memory (expandable to 1.5 MB), DIN 66025 programming, 2D/3D simulation, RS-232C serial interface, tool compensation (up to 600 tools), constant cutting speed, thread cutting/tapping • Construction: 60° slant bed, steel welded construction on reinforced concrete base with 3-point support; hydrostatic guides (X-axis) • Tool measurement setup • Chip conveyor interface (interface only) • Power supply: 3x400 V (+10%), 50 Hz, total connected load 20.5 kW (41 kVA) Pjdpfx Amey If A Hspepr Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2000. This Monforts RNC 400 AC features a turning length of 600 mm and a swing over bed of 410 mm. It is equipped with a 12-station disc turret and a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 AC machine we have for sale. Contact us for further details. • CNC memory: 256 kB (buffered RAM), expandable to 1.5 MB • Programming language: DIN 66 025 with high-level language extensions • Swing over bed: 410 mm • Swing over cross slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Material clearance (bar capacity): 65 mm • Max. torque: 500 Nm • Axes/feeds: AC servo drives with electronic safety monitoring; rapid traverse X/Z 24/24 m/min; feed force X/Z 7.2/10.7 kN • Turret: 12-station disc turret (DIN 69880/VDI 3425/2), 40 mm shaft diameter • Driven tools: 12 stations; max power 13.6 kW (25% ED); max torque 28.9 Nm; max speed 4500 rpm • C-axis: 0–25 rpm; 300 Nm holding torque • Tailstock: Separate guide rail; manual clamping; 900 mm travel; 90 mm quill stroke; 12,000 N force (adjustable); MT3 • Hydraulic system: Central pressure oil supply for hydrostatics and clamping • Cooling: 310 L tank; reinforced coolant pump (3 bar, 40 L/min) • Bed: 60° slant bed; steel welded construction on reinforced concrete base with 3-point support • Power requirements: 3x400 V, 50 Hz; total connected load 20.5 kW (41 kVA) Additional equipment • Hydraulic hollow clamping device • Parts catcher • A6 drawtube for collet chuck Pjdpfx Amsy Ifptepspr • 200 mm suction nozzle • 1 GB storage expansion • Network card • Driven tools with tapping without compensation chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, number of axes: 3, These two 3-axis MORI SEIKI NL 2500 MC/700 were manufactured in 2005. They feature a maximum turning length of 700 mm, X-axis travel of 260 mm, and Z-axis travel of 795 mm. The machines include a turret capacity of 12 positions and are equipped with driven tools and a tailstock. If you are looking to get high-quality turning capabilities, consider these MORI SEIKI NL 2500 MC/700 CNC turning cells with automation that we have for sale. Contact us for further details. • 2 units • Availability: Available from mid-May 2026 • Max. turning length: 700 mm • Turret capacity: 12 positions • Tailstock: Yes • Tool measurement system: Yes • Condition: Regularly maintained; cell currently in operation; machines known for durability and reliability Additional equipment • Automation: Motoman robot • Robot interface: Yes • Fully integrated turning cell Ppodpoy Idzbsfx Ampor • Coolant skimmer • Chip conveyor (hinge-type / lamella) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 810D, number of axes: 2, Horizontal turning machine manufactured in 2008. This Weiler E50x2000 features a center distance of 2000 mm and a swing over bed of 570 mm. It has a spindle bore of 83 mm and a maximum torque at the spindle of 1600 Nm. Fully overhauled in 2026, it includes significant upgrades for enhanced performance. If you are looking to get high-quality turning capabilities, consider the Weiler E50x2000 machine we have for sale. Contact us for further details. • Control system: Weiler D3 with Siemens Sinumerik 810D • Center distance: 2000 mm • Center height: 280 mm • Swing over bed: 570 mm • Swing over cross slide: 340 mm • Cross slide travel: 340 mm • Bed slide guide length: 560 mm • Spindle head: DIN 55025, size 8 • Spindle bore: 83 mm • Main spindle internal taper: Metric 90 • Main drive power: 20 kW (60% duty cycle); 17 kW (100% duty cycle) • Maximum spindle torque: 1600 Nm • Speed range: • Gear stage 1: 1–625 rpm • Gear stage 2: 4–2500 rpm • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Tailstock quill taper: Morse taper 5 • Tool holder system: Multifix size C or Parat size 3 • Availability: machine available soon • Overhaul: will be fully overhauled in 2026 • Hardening and grinding of all bed guides; grinding of tailstock guides • Overhaul of complete bed and cross slide assembly (grinding/scraping of all guideways) • Renewal of bed slide sliding lining • Renewal or relining of keyways and lower guides • Installation of a tool system on a console (Multifix C or Parat Gr.3) • Overhaul of complete spindle housing assembly • Regrind main spindle (internal/external taper and face) • Renewal of main spindle bearings • Renewal of X-axis ball screw drive incl. bearings • Renewal of Z-axis ball screw drive incl. bearings • Overhaul of tailstock quill and bore; replacement of spindle and nut • Renewal of all guideway wipers • Replacement of all drive belts • Cleaning and testing of main spindle motor • Overhaul of existing safety devices • Replacement of defective rotary, rocker, and limit switches • Replacement of spindle and handwheel encoders • Cleaning and testing of the central lubrication unit • Replacement of movable cables and coolant hoses in the work area/to the monitor • Replacement of the membrane keypad (monitor) • Renewal of the energy chains • Painting in standard colors (standard texture) • DGUV and high-voltage testing with test report • Data backup of machine parameters/software • Geometric acceptance testing according to DIN 8605 Additional equipment • Chip conveyor: used unit included • Optional accessory: additional chip conveyor availableThe machine will be overhauled in July the pictures are only refreneces of how it would look like. Ppjdpfx Amjy H E Akepsr Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 4,000 rpm, travel distance X-axis: 48 mm, travel distance Z-axis: 236 mm, spindle motor power: 750 W, total height: 400 mm, overall weight: 85 kg, number of axes: 2, Horizontal turning machine manufactured in 2006. This EMCO Concept Turn 55 features a maximum turning diameter of 52 mm and a maximum part length of 215 mm. It includes a tool turret with 8 positions and a spindle speed range of 120–4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMCO Concept Turn 55 machine we have for sale. Contact us for further details. • Working area • Swing over bed: 130 mm • Swing over cross slide: 60 mm • Maximum turning diameter: 52 mm • Maximum part length: 215 mm • Spindle/Workholding • Spindle connection: factory standard • Spindle bore: 16 mm • Chuck diameter: 74 mm • Through hole in chuck: 15 mm • Automatic chuck diameter: 76 mm • Mechanical speed steps: 2 • Maximum torque: 14 Nm • Tooling • Tool turret positions: 8 • Tool holders (internal/external): 4/4 • Tool shank size: 12 x 12 mm • Boring bar diameter: 10 mm • Feeds/Drives/Accuracy • Feed drives: 3-phase stepper motors; resolution 0.0005 mm • Rapid traverse X/Z: 2 m/min • Working feed X/Z: 0–2 m/min • Feed force X/Z: 1000 N • Position scatter X: 0.008 mm • Position scatter Z: 0.008 mm • Tailstock • Quill stroke: 35 mm • Quill diameter: 22 mm • Taper: MK1 • Automatic tailstock quill stroke: 15 mm • Lubrication • Guideways: oil • Other lubrication points: grease • Pneumatics • Supply pressure: 6 bar • Connection: 10 mm Pjdpfx Aey H Etcsmpjpr • Electrical • Power supply: 115/230 V • Voltage tolerance: +5/-10 % • Frequency: 50/60 Hz • Connected load: 0.85 kVA • Max fuse: 12 A • Dimensions/Weight/Noise • Axis height above floor: 320 mm • Footprint: 840 x 695 mm • Sound pressure level: 65 dB(A) Technical Specification Driven Tools No Counter Spindle No

Condition: excellent (used), Year of construction: 2007, Siemens C 200 – 4D control Turning diameter: 100 mm Ppedpfx Amjy Hxtcepjr Turning length: 280 mm 8-position turret with driven tools 6-position turret with driven tools Spindle speed: 6000 rpm Max. bar capacity: 60 mm Rear drilling unit for 5 stations Knoll chip conveyor Coolant system

Condition: used, turning length 177,8 mm turning diameter 114 mm control FANUC Series 0-T bar passage 34 mm x-axis 140 mm z-axis 280 mm number of tool places 8 Pos. spindle tunring speed 5.000 U/min spindle drive 7,5 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features: - 2 turrets - Driven tools Accessories, tools shown, and clamping devices are only included if noted in the additional information. Psdpfx Asy Hxqhompepr Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2002, spindle speed (max.): 2,500 rpm, travel distance X-axis: 550 mm, travel distance Z-axis: 1,130 mm, spindle motor power: 22,000 W, controller manufacturer: FANUC, controller model: 21i-T, number of axes: 2, Horizontal turning machine manufactured in 2002. This DOOSAN S 550 L features a maximum workpiece diameter of 550 mm and a spindle power of 22 kW. It includes a programmable tailstock and a 12” 3-jaw chuck, enhancing operational efficiency and precision. If you are looking to get high-quality turning capabilities, consider the DOOSAN S 550 L machine we have for sale. Contact us for further details. • Condition: Fully functional, ready for demonstration; machine still under power; enhanced operational efficiency and precision • Capacities: max workpiece diameter 550 mm; swing over bed 710 mm; distance between centers 1230 mm; spindle center height 1067 mm; bed width across saddle slideway 280 mm • Spindle: nose ASA A2-8; spindle hole taper MT No. 7; spindle bore Ø102 mm; front bearing Ø150 mm; bearings: roller/angular + thrust; speed override 50–150; motor AC 18.5/22 kW (continuous/30 min) • Turret/tooling: V12 turret; standard tool shank 25 mm; max boring bar Ø50 mm • Axes: rapid traverse rate X: 20, Z: 24 (units as provided) • Control/electrics: NC unit F-21iTB; total power consumption 31 kVA • Pumps: hydraulic pump motor AC 1.5 – 4P kW; way lubricating pump motor AC 0.02 – 4P kW; coolant pump motor AC 0.4 – 2P • Other features: steady-rest and tailstock move when hooked to the carriage Ppsdpfx Amsy Hrgcsper Additional equipment • Programmable tailstock • 12" 3-jaw chuck • Self-centring steady rest SLU 3.1 • Automatic tool measuring arm Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2000, Turret 1 - facing/length turning 155/280 mm Turret 2 - facing/length turning 82/120 mm Spindle bore (main spindle) 79 mm ((w/collet chuck 65 mm) Spindle bore (sub spindele 65 mm (w/collet chuck 42 mm) Spindle speeds (25-5000 rpm (main spindle) C-axis - 5000 rpm. Podey Hppzspfx Ampepr Turret w/8 stations Control: Siemens Sinumerik 840 C Equipped with: Magazine bar feeder Manuf. Simag model 65.1 - 3200 mm - built 2000 Chip conveyor Various tool holders

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 4,000 rpm, travel distance X-axis: 243 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 740 mm, overall weight: 9,600 kg, controller manufacturer: FANUC, controller model: 0i-TD, number of axes: 4, This 4-axis Romi GL 350B CNC Horizontal Turning Center was manufactured in 2014. It features a maximum workpiece diameter of 350 mm and a spindle speed of 4,000 rpm. The machine includes a counter spindle with a speed range of 6 – 6,000 rpm and a tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the Romi GL 350B machine we have for sale. Contact us for further details. • Axes: • B-axis max rotation: 830° • Capacity: • Max. workpiece diameter: 350 mm • Max. bar passage: Ø 64 mm • Main spindle: • Spindle nose: A2-8 • Counter spindle: • Included • Speed: 6–6,000 rpm Ppodpfxjy E Nirs Ampor • Spindle nose: A2-5 • Turret: • 12 positions • Tool attachment/interface: BMT-65 • Dimensions : • Machine depth: 2,080 mm Technical Specification Counter Spindle Yes Driven Tools No

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 4,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 1,065 mm, overall weight: 2,800 kg, controller manufacturer: SIEMENS, controller model: 802D, number of axes: 3, This 3-axis Romi C420 was manufactured in 2013. It features a swing over bed of 430 mm and a distance between centers of 1,000 mm. The machine is equipped with a Siemens 802D control unit and has a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Romi C420 horizontal turning machine we have for sale. Contact us for further details. • Capacity: • Chuck size: 150 mm • Bar capacity: 53 mm • Swing over bed: 430 mm • Swing over cross slide: 200 mm Ppsdpfx Asy E Nh Ismpjr • Distance between centers: 1,000 mm • Spindle: • Motor power: 10 HP • Configuration: • 4-way tool post • Tailstock • Dimensions : • Approx. dimensions: 2.75 m x 1.30 m Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder Podpfx Amjy E I Hiepepr • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) Additional equipment • OPTIONAL: HALTER LoadAssistant Universal Big 70 (robot) • Gripper for Doosan Universal Big 70 • Turning station • Workpiece support • Base plate 23 mm / 175 mm Big 70 • Machine interface box Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 1,915 mm, total width: 1,985 mm, overall weight: 6,550 kg, controller manufacturer: SIEMENS, product length (max.): 3,857 mm, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2022. It features a maximum turning diameter of 255 mm and a turning length of 760 mm. The machine is equipped with a 24-station tool turret and driven tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D Control touchscreen with ShopTurn 15 inch display • 6-axis configuration with driven tools, Y-axis and sub-spindle • Main and sub-spindle as built-in motor spindles • Cylindrical roller bearing, accuracy class P4, lifetime lubrication • Main spindle chuck diameter 255 mm • Sub-spindle chuck diameter 175 mm Ppedpfxoy E Izas Ampsr • Hollow clamping device, hydraulically actuated • Hollow clamping cylinder • 24-station tool turret (BMT65P interface) • Automatic tool measuring arm, electrically swiveling • Dynamic spindle speed control • Counter spindle with tailstock function • Coolant flow max 448 L per minute • Oil flow 336 L per minute • Electronic safety clutch for X and Z axes • Working area swing over bed 780 mm • Swing over cross slide 630 mm • Max turning diameter 255 mm • Max turning length 760 mm • Bar capacity 76 mm • Max workpiece weight including chuck 250 kg • Main spindle bore 91 mm • Max torque approx 706 Nm • Sub-spindle bore 52 mm • Spindle speed up to 6000 rpm • Motor power approx 18.5 kW • Torque approx 118 Nm • C-axis main spindle: 360° resolution 0.001°, speed 200 rpm, torque approx 1508 Nm • C-axis sub-spindle: 360° resolution 0.001°, speed 200 rpm, torque approx 121 Nm • Turret: 12 driven tool stations out of 24 • Max driven tool speed 5000 rpm • Driven tool power approx 7.5 kW • Driven tool torque approx 50 Nm • Rapid traverse X and Z approx 30 m/min; Y approx 10 m/min • Bed angle 30° • Coolant tank capacity approx 220 liters • Coolant pump pressure 7 bar • Hydraulic tank approx 20 liters • Central lubrication automatic system • Electrical connection AC 380 V, 3-phase, 50/60 Hz • Total power approx 69.27 kVA • Machine was never used (like new) Additional equipment • LNS hinged belt chip conveyor, right side, without filtration • Dormatec AF-30P oil mist extraction system • Boring bar holders, diameter 50 mm to 25 mm • Double boring bar holder, diameter 32 mm • Reducing sleeves set: 40/10, 40/12, 40/16, 40/20, 40/25, 40/32 • U-drill reducing sleeves: 40/20, 40/25, 40/32 • Two Eppinger driven tool holders BMT65P, straight, with external cooling Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: as good as new (ex-display), Year of construction: 2021, Brand new, unused machine!!! DOOSAN LYNX 2100G Year: 2021/10 Max. turning diameter: 170 mm Max. turning length: 330 mm Ppodpfsy E Ixxjx Ampor Standard chuck size: 6" Max. spindle torque: 118 N·m Max. spindle speed: 6000 rpm Max. spindle power: 18.5 kW Parts catcher Control system – FANUC touch Cromar chip conveyor Machine documentation

Condition: ready for operation (used), Year of construction: 2012, operating hours: 23,197 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, spindle motor power: 11,000 W, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 7, This 7-axis DMG Sprint 50 2T was manufactured in 2012. It features a maximum turning diameter of 50 mm and a turning length of 550 mm. The machine is equipped with two turrets, each with 12 driven tool stations, and offers a rapid traverse speed of 30 m/min. If you are looking to get high-quality turning capabilities, consider the DMG Sprint 50 2T horizontal turning machine we have for sale. Contact us for further details. • number of cross slides 3 • main spindle yes • sub spindle yes • max turning diameter 50 mm • max turning length 550 mm • main spindle speed max 5000 rpm • sub spindle speed max 5000 rpm • main spindle power 11 kW • sub spindle power 11 kW • driven tool speed max 6000 rpm • turret speed 401 rpm • X1/X2 axis travel 160 mm • Z1/Z2 axis travel 550 mm • Y axis travel ±40 mm • rapid traverse speed 30 m/min • electrical connection 34 kVA • max current 135 A Ppodpfx Amoy Ey U Ejpjr • tailstock force 300 daN • tailstock stroke 510 mm • tailstock connection MK3 • coolant tank capacity 980 l • coolant filter 50 µm • coolant pump pressure 20 bar • collet size 52 • max hex 43 mm • max square 35 mm • 3-jaw chuck type BBD 140/39 • optional accessories tool holders driven tools collets • spindle hours 23198 h • Optional: bar loader • loading area 500 x 630 x 1250 mm • max load 350 kg • max bar weight 40 kg • material diameter range 6 to 70 mm • square min edge 6 mm • hex range 5 to 60 mm • bar length 500 to 1200 mm • spindle liner max length 2000 mm Additional equipment • Tool holders • Driven tools • Collets Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 190 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 660 mm, number of axes: 6, This 9-axis TAKISAWA TM-2000Y2 CNC Horizontal Turning Center was manufactured in 2022. It features a twin turret configuration with dual Y-axis capability, allowing for simultaneous machining. The machine includes a sub-spindle for complete machining and is compatible with bar work. If you are looking to get high-quality turning capabilities, consider the TAKISAWA TM-2000Y2 machine we have for sale. Contact us for further details. • Condition: Demo machine • Running hours: 173 hMachine configuration • Twin turret configuration • Y-axis on both turrets • Sub-spindle included • Main spindle + sub-spindle complete machining • Twin turret simultaneous machining • Dual Y-axis capability • High productivity turning center • Bar work compatibleControlled axes • 9 controlled axes • X1 / Y1 / Z1 • X2 / Y2 / Z2 • C1 main spindle • C2 sub spindle • A-axis (sub spindle movement)Axis travels • Upper Turret (X1 / Y1 / Z1) • X1 travel: 190 mm • Y1 travel: 90 mm (±45 mm) • Z1 travel: 660 mm • Lower Turret (X2 / Y2 / Z2) • X2 travel: 160 mm • Y2 travel: 90 mm (±45 mm) • Z2 travel: 660 mm • Sub-Spindle (A-axis) • A-axis travel: 660 mmMain spindle • 3-jaw chuck: Kitagawa BB206 • Collet chuck: SMW PPBE-42Sub-spindle • 3-jaw chuck: Kitagawa B206 • Collet chuck included (SMW)Machining features • Driven tools included • Simultaneous upper + lower turret machining • Turning / milling / drilling in one setup • Front and back side complete machining • Part transfer between spindlesCoolant / functions • High pressure coolant: 9 bar • Abnormal load detection function • Raku-Raku monitor controller optionIncluded tooling • Static toolholders included • 2 pcs axial rotary toolholders Additional equipment Ppedpfx Amjy Ex E Aeper • Bar feeder interface • Remaining bar discharge device • Workpiece unloader with conveyor • Chip conveyor included • Manual tool setter Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, spindle motor power: 15,000 W, total height: 1,693 mm, total width: 1,595 mm, overall weight: 3,600 kg, controller manufacturer: FANUC, controller model: 0i PLUS, product length (max.): 2,805 mm, number of axes: 3, This 3-axis DN solutions LYNX 2100LMSA was manufactured in 2022. It features a maximum turning diameter of 300 mm and a turning length of 510 mm. The machine includes a 6-inch chuck size, a 12/24 station turret, and a sub-spindle for enhanced capabilities. If you are looking to get high-quality turning capabilities, consider the DN Solutions LYNX 2100LMSA horizontal turning machine we have for sale. Contact us for further details. Ppodpfx Aey Ex A Ujmpor • Condition: New, 0 operating hours • Control unit: FANUC 0i PLUS with 15” touchscreenCapacity • Chuck size: 6 inch • Max. turning diameter: 300 mm • Max. turning length: 510 mmAxes / Travels • X-Axis rapid traverse: 30 m/min • Z-Axis rapid traverse: 36 m/min • Number of linear axes: 2 (X / Z) • C-axis: Spindle positioning for milling and drilling operationsMain spindle • Max. spindle torque: 127 NmSub-spindle • Sub-spindle: Yes • Max. sub-spindle speed: 6,000 rpmTurret • Turret stations: 12 / 24 • Rotary tool speed: 6,000 rpmIntegrated options • Automatic tool setter • High-pressure coolant system: 7 bar Additional equipment • Chip conveyor • Robot interface • Automatic door • Parts catcher with conveyor Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2008, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Pedpoy Ev Iuofx Ampepr Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 360 mm, travel distance Z-axis: 900 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 4, This 4-axis SPINNER TC800 110 SMCY was manufactured in 2016. It features a maximum X-axis travel of 360 mm and Z-axis travel of 900 mm, along with a sub spindle and live tool capabilities. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 110 SMCY horizontal turning machine we have for sale. Contact us for further details. Podsy En Awjpfx Ampepr • Tool setter Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 620 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: SIEMENS, controller model: 840C, number of axes: 3, Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 400 CM features a maximum chuck diameter of 500 mm, an X-axis travel of 620 mm, and a Z-axis travel of 2000 mm. It is equipped with a live tool for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details. Ppjdpjy Enyiofx Ampor • Chuck: 500 mm Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 405 mm, travel distance Z-axis: 2,049 mm, controller manufacturer: SIEMENS, controller model: 840C, number of axes: 3, Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 315 CM features a maximum turning length of 2,049 mm and a chuck diameter of 400 mm. It is equipped with live tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 315 CM machine we have for sale. Contact us for further details. • Chuck diameter: 400 mm Pjdpfx Aey Enqnsmpopr Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 620 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 400 CM features a 500 mm chuck and a live tool for enhanced versatility. It offers an impressive X-axis travel of 620 mm and Y-axis travel of 2000 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details. • Chuck diameter: 500 mm Technical Specification Ppodpfxsy Enlls Amper Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 405 mm, travel distance Z-axis: 2,049 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 315 CM features a maximum turning length of 2,049 mm and a turning diameter of 400 mm. It is equipped with a live tool for enhanced machining capabilities. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 315 CM machine we have for sale. Contact us for further details. • Chuck size: 400 mm Ppedpoy Enhaofx Amper Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,100 mm, overall weight: 3,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2007. This Weiler E55X1000 features maximum turning diameter of 315 mm and a a center distance of 1100 / 2100 mm. It is equipped with a Sauter 8-fold tool system and a spindle speed range of 1 – 2500 rpm. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details regarding this machine. • Internal taper: Metric 90 Psdpfx Amoy Em A Aepopr • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm • Flange diameter: 500 mm • Maximum turning diameter: 315 mm • Maximum torque: 1600 Nm • Tool system: Sauter 8-fold • Number of tool positions: 8 • Tool shank size: 32 x 25 mm • Turret interface: Capto C4 • Number of face slides: 1 • Center distance: 1100 / 2100 mm • Turning length: 340 mm • Tailstock taper: MK 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Maximum tailstock travel: 1000 / 2000 mm • Continuous duty speeds (S1):Gear stage I: 89 rpmGear stage II: 355 rpm • Emission level: 80 dB(A) • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Nominal current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: Ball screw in Z axis makes noise, but dimensional accuracy is not affected Additional equipment • Extraction system Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,100 mm, total height: 1,750 mm, total width: 1,850 mm, overall weight: 3,800 kg, product length (max.): 2,850 mm, number of axes: 2, Horizontal turning machine manufactured in 2004. This Weiler E55X1000 features a maximum chuck diameter of 315 mm and a spindle diameter of 120 mm. It includes a robust tool system with a turret and offers a cutting speed of 140 m/min. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details. • 20 kW = real power (mechanical/electrical output) • 27 kVA = apparent power (includes reactive power) • Internal taper: metric 90 • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm • Max. faceplate diameter: 500 mm • Maximum chuck diameter: 315 mm • Maximum torque: 1600 Nm • Tool system: turret (VDI 40) • Tool shank size: 32 x 25 mm • Number of longitudinal slides: 1 • Number of cross slides: 1 • Center distance: 1100 • Cross travel: 340 mm • Tailstock taper: MK 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Maximum tailstock travel: 1000 / 2000 mm • Feed rate longitudinal: 0.001 – 20 mm/rev • Feed rate cross: 0.001 – 20 mm/rev • Rapid traverse longitudinal: 10 m/min • Rapid traverse cross: 5 m/min • Feed force longitudinal: 10000 N • Feed force cross: 7000 N • Metric thread range: 0.1 – 250 mm • Whitworth thread range: 1/4 – 56 threads/inch • Module range: 0.125 – 28 • DP range: 0.05 – 48 • Maximum cutting cross section: 2.25 mm² • Cutting speed: 140 m/min • Gear stage I: 89 rpm at 100% duty cycle • Gear stage II: 355 rpm at 100% duty cycle • Coolant consumption (normal): 30 l/min at 0.4 bar • Coolant consumption (increased): 30 l/min at 3.5 bar • Noise level: 80 dB(A) Psdpfoy Em Avjx Ampjpr • Electrical: • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Nominal current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: A small actuator that switches between the gear stages is defective; both gear stages are functioning. Additional equipment • Chip conveyor Technical Specification Counter Spindle No Driven Tools No