Detmar Voigt Maschinenhandel

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 44 kW (59.82 HP), pressing force: 500 t, stroke length: 300 mm, operating speed: 9 mm/s, throat depth: 400 mm, clearance between the columns: 5,050 mm, total length: 7,500 mm, total width: 4,200 mm, total height: 5,900 mm, overall weight: 67,000 kg,

Condition: used, Year of construction: 2002, - Panel length: 4.5 m - Panel height: 2.2 m - Without scoring blade Used vertical panel saw Manufacturer: Holzher Type: 1255 Year of manufacture: 2002 Not refurbished - no warranty Technical data - Panel length: 4.5 m - Panel height: 2.2 m Hnedpszuyyksfx Abrsr - Without scoring blade Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1995, Multi-blade saw with infeed and stacking system Manufacturer: Paul Type: K 34G / 1500 Year of manufacture: 1995 Hjdezuyydjpfx Abrenr Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1989, Circular saw Manufacturer: Martin Type: T 72 Year of manufacture: 1989 Technical data Saw blade min. 200 mm Saw blade max. 450 mm Rotational speed 2800/4000/5500 RPM Voltage 380 V 50 Hz Rated current 18.0 A Note: Hnjdpozuyx Tofx Abror The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2015, - Feed rate: maximum 40 m/min - Motor power: 5.5 Kw - Working length: 7.35 meters Miter saw Manufacturer: Tigerstop Type: UKA 600 Year of manufacture: 2015 Hnjdpfx Abszuyx Hersr Tiger UKA 600 miter cutting system consisting of: Tiger Stop 7.5 automatic feed and stopper Overall length: 7.95 meters Working length: 7.35 meters Net working length (automatic saw): 6 meters Voltage: 220 volts 50 Hz Motor power: 0.45 Kw Feed rate: maximum 40 m/min (depending on the load) Accuracy: +/- 0.4 mm as a sliding guide. Infeed table for TigerStop 6.8 Overall length: 7.4 meters Table width: 325 mm Upward stroke miter saw model UKA 600 with pneumatic lift and clamping device Saw unit mounted on a rotary table with diameter: 980 mm Diameter of the saw blade: 600 mm Cutting capacity: 165 x 240 mm at 90 degrees Maximum cutting height: 165 mm at the fence and 175 mm diameter (at 90 degrees) for round material Cutting angle: 30 - 90 - 30 degrees 45 - 90 - 45 degrees with automatic function Motor power: 5.5 Kw Voltage: 400 volts 50 Hz Working height: 920 mm The machine is controlled by a push button for semi-automatic operation or fully automatically for 90-degree angles via the TigerStop. The rotary table is controlled by a Tigerstop servo drive TigerDrive. Outfeed/infeed table with side protection Length: 3.7 meters Width: 325 mm PC control with Beamworks program, computer with touch panel and computer cabinet. Cutting list download option for csv file. Extension with 6-strand flipper loading device For automatic loading of material with a length of 500 - 6000 mm. Shorter pieces can be placed directly on the infeed table. Loading device consisting of: 6 flipper beams with tables including the 2 aluminum profiles 80 x 40 mm per beam, the flippers, the connecting tube, 1 pneumatic cylinder with 24-volt valve. The net loading length is approximately 1.38 m. 1 additional support strand without flipper on the outside of the loader 2 extra cylinder set for the loading device Complete electrical control cabinet with PLC, power supply, Emergency stop safety relay, complete wiring etc. (Including additional electrical wiring for the safety fence door) Label printer package for Beamworks Safety fence on the back of the machine, only on the infeed side. Including entrance door with safety lock And additional protective device on the front to prevent intrusion between the loading strands. Product length measurement with sensor in the protective cover, controlled by the Tigerstop control. The length measurement and download with Tigerlink only work with 90-degree cuts. Tigerlink download software for downloading a csv file (cutting list). Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, Panel dividing saw Manufacturer: Selco / Systraplan Type: WNTR 710 Hnodpszuyxyjfx Abror Year of manufacture: 2011 with SYSTRAPLAN supporting table Technical data Cutting length: 4300 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, - max. panel width 4500 mm - max. panel length 2200 mm - max. saw blade projection 127 mm - main saw 18.5 kW Hsdozuyxmepfx Abronr - scoring saw 2.0 kW - with lifting table used panel dividing saw Manufacturer: Selco Type: WNTR 730 Year of manufacture 2011 Technical data: Max. panel width 4500 mm Max. panel length 2200 mm Max. saw blade projection 127 mm with lifting table 9 grippers on the sliding fence Flexible grippers for positioning via NC Max. feed rate 130 m/min 1 saw unit with positioning via NC max. tool diameter 470 mm Motor power 18.5 kW Scoring unit max. blade diameter 200 mm Motor power 2 kW Quick-change device QUICK CHANGE SYSTEM Max. feed rate 185 m/min Machine programming software OSI Barcode label printer Barcode scanner Total installed power 44 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1998, Window manufacturing system Manufacturer: Weinig Type: Unicontrol 10-5 Year of manufacture: 1998 Technical data Working width: 40 - 220 mm Working height, longitudinal machining: 40 - 100 mm Working height, transverse machining: 40 - 100 mm (80 mm counterpiece height) Workpiece length, longitudinal machining: min. 220 mm + 2 x tenon length Workpiece length, transverse machining: min. 275 mm + 1 x tenon length at 320 mm tool diameter Feed (transverse machining) Motor power: 0.3 kW Feed speed: 3 - 25 m/min Workpiece clamping: by means of 2 clamping jaws Length stop: with scale and magnifying glass for frame or sash outer dimensions Counterpiece: pneumatically controlled - 4 positions - (not for studio windows) up to a wood height of max. 80 mm Double part package: For single or double part feeding. With transverse separation and retention system 1. Wood (lying against the stop) Wood width: 55 - 90 mm 2. Wood Wood width: 130 mm Feed (longitudinal machining) Motor power: 2.2 kW Feed speed: 4 - 18 m/min (continuously variable via frequency converter) Feed roller spacing: 100/120 mm Feed roller width: 30/50 mm Feed roller diameter: 95 mm Machining units Cut-off saw Hodjzuyxgepfx Abrjnr Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 2800 rpm Tool circle diameter: max. 400 mm Adjustment, axial: pneumatically controlled against a 4-position turret 1. Tenon and mortise spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 3250 rpm Tool circle diameter: max. 320 mm Tool clamping length: 320 mm Adjustment, axial: 240 mm Number of tools: 4 x 80 mm Axial adjustment: hydraulic 1. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 Axial adjustment: hydraulic 2. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 mm Axial adjustment: hydraulic 2 Mechanical spindle brake for profiling spindle 3 Mechanical spindle brake for cut-off saw and profiling and sawing units Profiling milling unit (horizontal, top) before the last profiling spindle radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 130 mm Tool clamping length: 40 mm Adjustment, axial: 52 mm Adjustment, radial: 125 mm Profiling milling unit (vertical, right) at the end of the machine radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 210 mm Tool clamping length: 160 mm Adjustment, axial: 90 mm Adjustment, radial: 100 mm Length, tenon and mortise spindle with 640 mm tool clamping length (instead of 320 mm spindle) Motor power: 15 kW Spindle speed: 2925 rpm Number of tool positions: 8 x 80 mm Adjustment, axial: 560 mm Laser alignment light for cut-off saw for detecting the section Studio window configuration Swiveling length stop +/- 60 with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for angled part production Limitation: Wood thickness max. 120 mm At -60 position: Workpiece width max. 110 mm with 80 mm tenon length, or max. 150 mm with counter profili

Condition: used, Year of construction: 1986, Table milling machine Manufacturer: Schneider Type: SK2/4 II Year of manufacture: 1986 Technical data - 3,000 - 10,000 rpm Hedjzuyxaspfx Abronr - Runs in both directions (left/right) - with Haffner feed unit - including accessories Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Swivel spindle milling machine Hnjdpfxozuyw Nj Abrer Manufacturer: Schröder Table dimensions: - Width 1,260 mm + 430 mm extension - Depth 770 mm + 400 mm extension Spindle diameter: 30 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1997, - Feeding and transport - Milling machine combination with glue application - Transfer station - Infeed station - End face press with stacking Dovetail tenon machine Manufacturer: Grecon Year of manufacture: 1997 Space requirements for operation and maintenance Length 18500 mm Width 6500 mm Height 2000 mm Weight and floor load Total weight 10500 Kg Floor load dyn. 25 N/cm² Wood data Wood type: Softwood or hardwood Length (min/max) 150 / 2000 mm Width (min/max) 50 / 205 mm Height (min/max) 35 / 50 mm Output length (min/max) 3000 / 6000 mm Machine components Feeding and transport Conveyor belt Type: FB 600 / 1000 Hnsdpfx Aszuyw Aebror Powered conveyor belt with fixed and foldable side guides and a retractable stop for aligning the packages. Technical data Length 1100 mm Width 950 mm Height 1000 mm Power consumption 1.1 kW Feed speed 75 m/min Milling machine Turbo milling combination Type: FDL-F-205/600/500 Two combined milling machines in a heavy-duty design with adjustable tables as workpiece supports, guided by a stable combined ball bearing and roller guide. Each milling machine is equipped with a clamping station, the trimming unit, and the milling unit. Either the second milling machine or both milling machines are equipped with a glue application system. The milling machines can be equipped with a scoring saw. Belts between the milling machines minimize package transport times, thus achieving a fast throughput. A pneumatic vibrating device in the clamping station ensures even alignment of the wood. Horizontal and vertical pressure devices clamp the package. The trimming unit is used to cut a reference edge on the workpiece. This reference edge determines the length of the respective dovetail tenon profile and can be adjusted. The dovetailing is carried out by the milling unit, followed by glue application via a side jet or roller applicator. Technical data Power consumption 63 kW Compressed air consumption 350 NL/min Exhaust diameter 2 x 250 mm Exhaust volume 10600 m³/h Drive Motor 1: Table feed, milling table Manufacturer: SEW Power consumption 1.5 kW Speed 71 rpm Motor 2: Belt drive Manufacturer: SEW Power consumption 1.1 kW Speed 227 rpm Motor 3: Trimming unit motor Manufacturer: Walter Power consumption 5.5 kW Speed 2880 rpm Motor 4: Milling spindle motor Manufacturer: Behnke Power consumption 22.0 kW Speed 3000 rpm Transfer Transfer station Type: ÜL WB 600/1000 Transfer station designed in a robust welded construction with an infeed belt, alignment stop, cross-feed unit, turning device with turning brush, and an outfeed belt, as well as adjustment devices for optimal adaptation to different wood dimensions. The packages of workpieces, which have been milled, are transferred from the milling table of the dovetail tenon milling machine to the conveyor belt of the transfer station and aligned flush with a stop. The aligned wood package is moved transversely to the infeed direction into the area of the turning device by the cross-feed unit. The separation of the wood package is carried out either directly onto the outfeed belt or by turning it 90 degrees and aligning it with a fixed edge. The discharge edge can be adjusted to the wood dimension. The separated wood is transported to the infeed station via a fast-moving conveyor belt. Technical data Power consumption 2.5 kW Compressed air volume 12 m³/h Feed speed 75 m/min Infeed station Infeed station Type: EKK 205 Infeed station with a side chain guide for transporting the separated pieces of wood.

Condition: used, Year of construction: 2021, functionality: fully functional, Format panel saw / table saw Format4 Kappa 550 by Felder, purchased on May 26, 2021, for precise longitudinal, transverse, and miter cuts in wood and panel materials. Professional saw for carpentry, interior design, and workshop use. Key technical data: - Machine type: Format panel saw / table saw - Saw blade diameter: 250–550 mm - Max. cutting height: approx. 202 mm at 90° / approx. 140 mm at 45° - Swivel range of saw unit: 0°–46° - Cutting width: approx. 1000 / 1250 / 1600 mm, depending on the model - Cutting length: approx. 2200–3700 mm, depending on the model - Speeds: 3000 / 4000 / 5000 rpm, optionally continuously variable 2000–6000 rpm - Motor power: approx. 7.5 kW, optionally higher depending on the configuration Hnodpfszuywiox Abror - Precise format table for repeatable, accurate cuts - Suitable for solid wood, panel materials, and dimensionally accurate furniture / interior design work - Core machine for professional woodworking shops, carpentry shops, training workshops, and makerspaces No warranty

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 91140733, Year of construction: 2019, operating hours: 735 h, load capacity: 2,000 kg, lifting height: 5,350 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: electric, mast type: triplex, battery capacity: 620 Ah, battery voltage: 48 V, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), empty load weight: 3,808 kg, Equipment: lighting, sideshift, Jungheinrich ETV 320 Reach truck, year of manufacture 2019 with a Triplex mast Details: Jungheinrich ETV 320 Year of manufacture: 2019 Work hours (h): 735 Mast type: Triplex Lift height (mm): 5350 Freelift (mm): 1700 Build height (mm): 2400 Attachments: Sideshift Lift capacity (kg): 2000 Fork length (mm): 1200 Weight (kg): 3808 Additional hydraulic vehicle: AH1 Additional hydraulic mast: AH1 Front wheels: Polyurethane Hsdozuywcspfx Abronr Rear wheels: Polyurethane Battery YOM: 2019 Battery capacity (Ah): 620 Battery voltage (V): 48 Accessories: Front spot light. Flashing beacon. Comments: Full freelift.

Condition: excellent (used), mileage: 435,986 km, power: 130 kW (176.75 HP), first registration: 09/2013, fuel type: diesel, tire size: 235/75 R17.5, axle configuration: 4x2, wheelbase: 4,820 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,000 mm, total width: 2,550 mm, permissible axle load (axle 1): 4,000 kg, permissible axle load (axle 2): 7,000 kg, loading space length: 7,140 mm, loading space width: 2,500 mm, loading space height: 2,530 mm, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, tail-lift, = Additional options and accessories = - (Roof) spoiler - Radio/CD player - Rearview camera - Side mirrors with electric adjustment - Side door - Sun visor - Digital speedometer = Additional information = General information Cab: basic License plate: 68-BDD-7 Technical information Number of cylinders: 4 Engine displacement: 5,132 cc Axle configuration Tire size: 235/75 R17.5 Brakes: Disc brakes Hnodpfx Abozuyv Soror Front axle: Max. axle load: 4000 kg; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Leaf spring suspension Rear axle: Max. axle load: 7000 kg; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Air suspension Weights Unladen weight: 7,020 kg Payload: 3,480 kg GVWR: 10,500 kg Functional Tail lift: Dhollandia Condition Technical condition: very good Optical condition: very good Damage: none

Condition: used, This appears to be a random string of characters and does not require translation. Hnodezuyvljpfx Abrjr

Condition: good (used), Year of construction: 2018, operating hours: 18,039 h, lifting height: 3,670 mm, fuel type: diesel, mast type: duplex, power: 119 kW (161.79 HP), fork length: 2,400 mm, Year of manufacture: 2018 Empty weight: 14.680 kg Lifting capacity: 8.000 kg Maximum passing height: 362 cm Number of valves: 3 Technical condition: good Visual appearance: good Mast type: duplex = Additional options and accessories = - 3rd valve - Closed cabin - Heater - Particulate filter = Remarks = = Additional options and accessories = - 4th valve - Particulate filter - Roof window Hodpfxjzuyu Ue Abrsnr = More information = Number of valves: 3 Number of owners: 1 Fork carriage: Positioner and spread Please contact Bas Sindorf , ) for more information

Condition: used, mileage: 224,873 km, power: 132 kW (179.47 HP), first registration: 04/2020, fuel type: diesel, empty load weight: 2,405 kg, maximum load weight: 1,095 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,100 mm, next inspection (TÜV): 07/2027, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: none, suspension: air, number of seats: 3, loading space volume: 21 m³, loading space length: 4,300 mm, loading space width: 2,300 mm, loading space height: 2,150 mm, maximum speed: 160 km/h, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, soot filter, spoiler, truck registration, * Well-maintained German vehicle from the first owner * Vehicle IDNT No.: ZCFC535D405344485 * Valid MOT until: Technical Data: * Overall length: 6850 mm * Overall width: 2350 mm * Overall height: 2850 mm * Permissible total weight: 3500 kg * Unladen weight: 2405 kg * Payload: 1095 kg Box: * Length: 4300 mm * Width: 2300 mm * Height: 2150 mm Special Equipment: * Storage compartment in the headliner of the driver's cab * Storage compartment on the dashboard with USB port and inductive charging cradle * Trailer socket, 13-pin * Dashboard, comfort version * Audio system: Digital audio system (DAB) HI-Connect with 7'' color display * Body manufacturer interface * Electronic Stability Program (ESP) with crosswind assist * Driver assistance system: High beam assistant (headlights with automatic dimming) Hnsdpfjzuyu Isx Abrjr * Driver assistance system: Emergency braking assistant AEBS + City Brake * Driver assistance system: Lane monitoring assistant, proactive (LDWS) * Rear axle suspension: Air suspension * Parking brake, electric * Speed limiter, programmable * Automatic climate control * Comfort headrests for passenger compartment * Steering wheel (leather) * Steering column (steering wheel) adjustable in height and length * Light and rain sensor * Fog lights with static cornering lights * Wheel covers * Tire pressure control system * Switch for lighting in the cargo area * Mud flaps, front * Seats in the driver's cab: Co-driver's double seat with multi-function storage and storage compartment * Seats in the driver's cab: Driver's seat, comfort version (hydraulic) * Full-LED headlights Standard Equipment: * Airbag, driver's side * Trailer stabilization program (TSM) * Trailer socket preparation * Anti-lock braking system (ABS) * Anti-slip regulation (ASR) * Drive type: Rear-wheel drive * Design: S-series * Exterior mirrors, electrically adjustable and heated * Brake assistant * Electronic brake force distribution * Electronic Stability Program (ESP) * Driver assistance system: Hill start assist (AAS) * Front axle suspension: Transverse leaf spring * Windshield and side windows tinted * Generator 210 A * Speed limiter: 160 km/h * Transmission: Automatic - Hi-Matic (8-speed) * Urea tank (AdBlue): 20 liters * Body/Superstructure: Standard platform body * Fuel tank: 70 liters * Engine: 3.0 L - 132 kW diesel * Wheelbase: 4100 mm * Diesel particulate filter * Low emissions according to Euro 6d emission standard * Daytime running lights * Service indicator * Immobilizer * Central locking with remote control * Permissible total weight: 3.50 t Nationwide delivery possible! Trade-in possible! Leasing and financing also possible without a down payment Errors, printing errors and prior sale are reserved.

Condition: good (used), Year of construction: 2008, operating hours: 2,541 h, lifting height: 8,800 mm, fuel type: electric, mast type: triplex, battery manufacturer: Batterie Siems, battery capacity: 620 Ah, battery voltage: 48 V, fork length: 1,200 mm, Year of manufacture: 2008 Empty weight: 3.590 kg Battery: 620 Ah, 48 V, Year of manufacture 2017, Brand of battery Batterie Siems Hsdpfszuyuzjx Abronr Lifting capacity: 1.700 kg Maximum passing height: 340 cm Number of valves: 3 Technical condition: good Visual appearance: good Mast type: triplex = Additional options and accessories = - 3rd valve - Battery charger = Remarks = = Additional options and accessories = - 4th valve - Pneumatic shaped solids = More information = Number of valves: 3 Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: ready for operation (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: W09368333J2D38007, conveyor belt length: 8,500 mm, conveyor belt speed: 2,000 mm/s, conveyor belt width: 1,200 mm, roller length: 3,000 mm, number of rollers: 1, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Conveyor belt Width: 1,200 mm Length: 8,500 mm Belt speed: 2.0 m/s Discharge height: 5,050 mm Hopper Loading height: 3,307 mm Hnodpfezuyuujx Abrsr Roller Number of rollers: 1 Roller length: 3,000 mm Maximum roller speed: 32 rpm Permissible total weight: 33,000 kg MACHINE DETAILS Dimensions & Weight Working dimensions (L x W x H): 16,786 x 2,500 x 5,050 mm Transport dimensions (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Drive Engine type: Diesel engine Manufacturer: MTU 6R 1300 Emission standard: Stage V Rated power: 390 kW / 530 hp Fuel tank capacity: 950 l Operating hours: 5,000 h EQUIPMENT Overband magnet

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Hsdpfxszuyuhe Abrenr Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Year of construction: 2021, functionality: fully functional, Lathe Twister FU-200, purchased on April 13, 2021, including roughing gouges and extensive clamping accessories. Suitable for woodturning, round parts, bowls, handles, small series, and creative workshop projects. Key Technical Data - Machine type: Lathe / Woodturning Lathe - Center height: approx. 200 mm - Swing over bed: approx. 395 mm, with optional external turning device up to approx. 700 mm - Distance between centers: approx. 715 mm, optionally extendable - Motor power: approx. 1.5 kW / 2 hp - Speed range: 2 belt stages, approx. 60–1350 rpm and 180–3750 rpm - Spindle connection: M33 x 3.5 with ASR Euro safety groove Hnsdpozuyt Rjfx Abrer - Tailstock / spindle taper: MK2 - Includes roughing gouges and extensive clamping accessories as per inventory note - Rotatable and adjustable spindle stock for flexible machining - Attractive complete package for hobby turners, workshops, schools, and makerspaces No warranty

Condition: used, This package includes: 3 x uprights at 3,000mm x 1,100m (blue) 8 x crossbeams at 2,700mm (yellow) 16 x safety pins This creates a single row of shelving with 2 bays and 2 levels + floor space = 18 pallet spaces (1,000 kg / pallet) Approximately 250 uprights and 2,000 crossbeams are available for this system. Simply contact us. Manufacturer: Jungheinrich Type: MPB Condition: used, good condition Height: 3,000 mm Length: approx. 5.50 meters Shelf depth: 1,100 mm Bracing: bolted Crossbeam length: 2,700 mm Shelf load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 18 Accessories such as: Floor mounting Connectors Load warning signs Impact protection Hnedpfx Aozuyr Tebrjr Guardrails Grid decks Rear panel grids Deep shelf supports Barrier rails and much more... Just ask us! "Benefit from over 20 years of industry experience – we provide you with competent and personalized advice as your experienced specialist dealer for new and used shelving systems." Sales and Delivery Conditions (B2B) - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible after individual consultation. - Offer Status: All offers are subject to availability. We reserve the right to sell goods that are still in stock. - Reservation of Ownership: The goods remain our unrestricted property until full payment has been received (no right of disposal or processing). - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). No warranty for defects in used and IIa goods. For new goods, the respective manufacturer's warranties apply.

Condition: good (used), The scope of delivery includes: 1x bracket for rear wall grid, used Hsdjzuyr Hopfx Abrenr Material color: hot-dip galvanized Internal designation: Variant 1 Diagonal length: approx. 410 mm Total width: approx. 90 mm Overhang: approx. 225 mm Material thickness: approx. 3.00 mm Weight/piece: 0.71 kg 2 elongated holes: 50 x 9 mm (W x H) Height: 30 mm General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 231458, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 370 mm, spindle speed (max.): 6,000 rpm, table load: 800 kg, TECHNICAL DETAILS Travel range X-axis: 3,700 mm Travel range Y-axis: 2,100 mm Travel range Z-axis: 370 mm Rotational range C-axis: 0–362° Swivel range A-axis: 0–90° Travel time C-axis (0–392°): 3 s Travel time A-axis (0–90°): 2 s Spindle speed: 6,000 rpm Spindle power: 16.5/56 kW Speed X-axis: 30 m/min Speed Y-axis: 30 m/min Speed Z-axis: 5 m/min Dimensions of tilting table: 3,500 × 2,000 + 500 mm Load capacity: 800 kg MACHINE DETAILS Stainless steel cover for saw blade with opening for cutter: Ø 425 mm Stainless steel cover for saw blade: Ø 625 mm Hnjdpfx Abjzuyryorer Total power consumption: 23 kW Water consumption for saw blade: 30 L/min Total weight: 4,800 kg EQUIPMENT Material and saw blade measuring system Vacuum system for moving the panels Camera with software for management Pneumatic tilting table Motorized rotary head (C-axis) Motorized saw blade inclination (A-axis) Stainless steel cover for saw blade with opening for cutter Stainless steel cover for saw blade

Condition: used, This package includes: 38 x crossbars, 2,700 mm each (yellow) 76 x locking pins - Remaining stock - Manufacturer: Tegometall Condition: used, good condition Crossbar length: 2,700 mm Crossbar height: 130 mm Shelf load capacity: 2,700 kg Accessories such as: Hsdpfxezuyrtj Abrsnr Floor mounting Connectors Load warning signs Impact protection Guard rails Grating Rear panel grating Deep shelf supports Barrier rails and much more... Just ask us! "Benefit from over 20 years of industry experience – we provide competent and personalized advice as your experienced specialist retailer for new and used shelving systems." Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible after individual consultation. - Offer status: All offers are subject to change. Items may be sold subject to prior sale. - Retention of title: Ownership of the goods remains with us until full payment has been received (no right of disposal or processing). - Warranty: Exclusive sale to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials and workmanship is excluded. For new goods, the respective manufacturer's warranties apply.