Medany Trade

Condition: used, Year of construction: 2002, Die-cutter Iberica JRK-105 Year: 2002 Description: Stripping unit Blanking unit Technical specifications: Drh0Px Maximum sheet size: 750 x 1050 mm Minimum sheet size: 350 x 400 mm Minimum paper thickness (according to quality):90 – 95 g/m2 Maximum cardboard thickness: 1.5 mm Maximum corrugated board thickness: 3 mm Maximum operational pressure: 300 T Maximum speed: 8500 sheets/hour Main drive motor with variable speed: 20 CV (15 KW) Total power installed: 43 CV (32 KW) Air required pressure: 6 KG / CM2 Machine appr. Weight: 23.600 KG Floor space occupied: length 10.10 M. width 6.26 M. height 3.30 M.

Condition: used, Year of construction: 1988, FLATBED DIE CUTTER BOBST AUTOPLATINE SPO 1600, max format 1100 mm x 1600 mm / 43.3" x 63" with 4 Bottom Printing unit and transfer Bobst * Vacuum feeder * Die cutting section * Waste elimination section * Centerline II * High pile delivery with two lifting tables * Max sheet format: 1100 mm x 1600 mm / 43.3" x 63" * Min sheet format: 520mm x 600mm / 20.5" x 23.6" * Cutting force: 400 t * Materials: E, B, C, CB, BE flutes * Max speed: 6,000 sheets/hour B8Bub3Iimq

Condition: excellent (used), Year of construction: 2004, Manufacturer: Gidue S.p.A., Italy Model: E-COMBAT 430 7K UV IST Year of manufacture: 2004 Web width: 430mm 7 colors UV 1 6 colors Print width maximum: 420mm Drfs0T Max unwind reel diameter: 1000 mm Diameter of the unwind shaft: 76 mm or 152 mm Max rewind diameter on the output shaft: 700 mm Diameter of the rewind shaft: 76 mm or 152 mm Printable Material (thickness) BOPP min 15my max 200my PAPER min 60gsm max 200gsm SUPPORTED WEB min 100gsm max 250gsm BOARD min 100gsm max 350gsm Aluminum from 12 my to 50 my Ink Type: UV Plate Thickness: 1.14 mm Stycky Back Thickness: 0.38 mm Includes: Sheet Conveyor - 1 pc. KONGSKILDE MULTIAIR 2000 - 1 pc. Waste Handling System MF- Cassettes Male-Female for cardboard die cutting incl. 2 cylinders 2cm3/m2; 400 L/cm - 1 pc. anilox 3cm3/m2; 380 L/cm - 1 pc. anilox 3.5cm3/m2; 380 L/cm - 5 pcs. anilox 5.5cm3/m2; 255 L/cm - 1 pc. anilox 6.6cm3/m2; 220 L/cm - 1 pc. anilox 7.5cm3/m2; 180 L/cm - 2 pcs. anilox 8.5cm3/m2; 140 L/cm - 2 pcs. anilox 11cm3/m2; 100 L/cm - 1 pc. anilox 18cm3/m2; 75 L/cm - 1 pc. anilox Z70 /222.25 mm/ - 7 pcs printed Z74 /234.95 mm/ - 7 pcs printed Z82 /260.35 mm/ - 7 pcs printed + 1 magnetic Z84 /266.7 mm/ - 7 pcs printed Z88 /279.4 mm/ - 7 pcs printed Z93 /295.275 mm/ - 7 pcs printed Z95 /301.625 mm/ - 7 pcs printed + 1 magnetic Z96 /304.8 mm/ - 7 pcs printed Z98 /311.15 mm/ - 7 pcs printed Z101 /320.675 mm/ - 1 pc magnetic Z105 /333.375 mm/ - 7 pcs printed Z108 /342.9 mm/ - 1 pc magnetic Z110 /349.25 mm/ - 7 pcs printed Z113 /358.775 mm/ - 7 pcs printed Z114 /361.95 mm/ - 8 pcs printed Z116 /368.3 mm/ - 7 pcs printed Z123 /390.525 mm/ - 7 pcs printed Z127 /403.225 mm/ - 8 pcs printed Z144 /457.2 mm/ - 3 pcs printed + 1 formatter with the ability to format 457.2 mm or 152.4 mm Z171 /542.925 mm/ - 7 pcs printed Flexible magnetic dies - 40 pcs Additional equipment and printing tools: N.1 Plate mounting for easy mounting of plates on the cylinders, equipped with two cameras and a monitor. N.1 Jumbo wash FLEXOWASH PK 200 WR for washing anilox, doctor blades,

Condition: good (used), Year of construction: 2004, operating hours: 30,981 h, Machine Platform with safety barrier Centerline system for quick job changeover Electronic device for sheet travel control Adjustable centering at the stripping Air conditioning for the electrical cabinet Gripper bars C.U.B.E. (Control Unit Bobst Electronic) for machine management Main motor with frequency variator Feeder Pile-tray with handle allowing manual lateral correction of the pile during production Pile height control at the front edge thanks to a photoelectric cell Adjustable lateral blowers with Centerline references Pile rear guide (OS and OOS sides) Safety system for lowering the pile try Suction unit with multiple adjusting C-4 NON-STOP FEEDER MANUAL DEVICE C-8 VERTICAL POSITIONING OF THE SUCTION UNIT. Eliminates manual interventions to compensate for the flatness of the pile shape Introduction table Covered with an anti-static stainless steel plate Inlet table feeder 4 front lays, adjustable in pairs with front register control 1 Pull-lay operator side (OS) adjustable according to Centerline, with sheet control 1 Double sheet detector Support plates at entry of platen station 1 Sheet-hold down device (guiding the sheets to front lays) 1 Upper frame with manual lifting device 1 Upper transport equipment for paper, paperboard and corrugated board 4 Transport belts. With lateral guidance C-5 CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGES Platin Grippers re-opening device Die-cutting device without band of gripper grip Equipment centering and locking Locking of the chase against the upper beam Measurement of the die-cutting force with strain gauge Resocell: synthetic material supporting plate. Thickness 22.5 mm 1 Upper chase with quick locking: fixed bottom (E-3) Plate, thickness 2 mm and make-ready protection plate of syntetic material, 1 mm thickness 1 Cutting plate (E-4) E-5 COMPENSATION PLATE 4 mm thickness. it's useful for thin plate for repetetive work E 55 ADJUSTABLE SUPPORTING PLATE CENTERINGS : micromeric screws allow fine adjustment of counters mounted on the cutting plate with respect to the die (+/- 0,9 mm lengthwise and crosswise. Stripping Station 3 drawer frame system 1 Upper Stripping Frame (F-2) 1 Upper stripping equipment (F-21) required to create a waste stripping tool, including crossbars, clamps, stripper holders and stripping pins of 3, 5 and 10 mm of diameter 1 Fastening equipment for stripping die (F-22) 1 Central drawer frame (F-71) 1 Fastening equipment stripping table (F-75) 1 lower pull-out frame (F-8) 1 Lower stripping equipment (F-81) Equipment for waste stripping including crossbars, pins and supports F-31 1 UPPER PULL-OUT FRAME QUICK LOCK. It reduces stripping tool assembly times; the quick-closing device allows the tool to be changed in the machine) F-35 1 FASTENING EQUIPMENT FOR UPPER PULL-OUT FRAME QUICK LOCK DEVICE FOR STRIPPING (TO FIX STRIPPING TOOL TO THE UPPER PULL-OUT FRAME QUICK LOCK) F-72 1 CENTRAL PULL-OUT FRAME QUICK LOCK F-76 1 FASTENING EQUIPMENT FOR STRIPPING TABLE ON CENTRAL PULL-OUT FRAME QUICK LOCK It allows to equip a stripping table to install it on central pull-out frame quick-lock Delivery Pile tray in delivery Adjustable rear and side joggers with Centerline marks 1 Braking brush Pneumatically controlled adjustable front joggers 1 Pushes the sheets down, ensuring good stacking G-5 AUTOMATIC NON-STOP ON DELIVERY Conformity to standards and security Operator safety devices By3Kewcy7Q Gripper Bar Chain Slip Cl...

Condition: good (used), Year of construction: 1987, operating hours: 19,093 h, Feeder Universal Feeder Non-stop on feeder with swords Motorized suction head unit Pile feeder with automatic lateral moving Introduction table Adjustable sheet synchronizer while running, allows to adapt the feeder cycle to that of the platen Feed table with 4 front lays, adjustable in pairs with front register control Feed table with "Pull" guide (OS) adjustable according to Centerline marks, with side register control PUSHING LAY FOR CORRUGATE OPPOSITE OPERATOR SIDE (OOS) Electronic double sheet device Sheet-hold down device (Introduction sheets guide in gripper) Upper frame with pneumatic lifting device D-7 REINFORCED SHEET TRANSPORT EQUIPMENT for rigid and corrugate cardboard included: Side-guided carrying straps Drefex Platin RESOCELL 22.5mm with 4mm compensation plate and 1mm metal sheet Support plate with micrometric centering of the cutting sheet for thin plates, thickness 1 mm UPPER CHASE WITH QUICK LOCKING: FIXED BOTTOM PLATE Stripping Station UPPER PULL-OUT FRAME UPPER PULL-OUT FRAME QUICK LOCK ON STRIPPING UNIT WITH ALL ITS TOOLS CENTRAL PULL-OUT FRAME QUICK LOCK ON STRIPPING UNIT WITH ALL ITS TOOLS LOWER PULL-OUT FRAME 3 points on lock system on ejection unit Blanking Station UPPER PULL-OUT FRAME QUICK LOCK ON BLANKING UNIT WITH ALL ITS TOOLS Universal lower tool for blanket SHEET BRAKES DEVICE BY "BERNOULLI" SYSTEM ON BLANKING STATION 3 points on lock system on blanking unit Various Speed 6.500 c/h All machine books, manuals and standard accessories ELEVATED 650 mm BECKER BLOWER PUMP PIAB SUCTION DEVICE Centerline system for quick job changeover Bobst-Electronic for the machine control Conveyor for automatic pallet change in delivery Wrapper device

Condition: good (used), Year of construction: 1981, operating hours: 27,629 h, Machine Step with safety barriers Centerline system for quick job changeover Electronic device for the sheet passage control Bobst-Electronic for the machine control ELEVATED 300 mm Console Centerline Feeder Pile feeder with automatic lateral moving Non-stop on feeder with swords Motorized suction head unit Universal Feeder Introduction table synchronization to adjust the arrival of sheets to the registers Pull-lay operator side (OS) adjustable according to Centerline, with sheet control By3Hljcbms D-7 REINFORCED SHEET TRANSPORT EQUIPMENT for rigid and corrugate cardboard included: Introducers and upper belts - Upper transport elements (wide belts) Guide belt device on feeder table Stripping Station F-2 : N. 1 Upper pull-out frame Delivery Guillotine device for front trim G-5 AUTOMATIC NON-STOP ON DELIVERY Various Micrometric system with compensating plate and 1 mm small metals sheet

Condition: good (used), Year of construction: 2000, operating hours: 50,905 h, Console CUBE control system Feeder Pull lay operator side Non-stop on feeder Platin Die-cutting plate 4 mm Cutting plate with micrometric adjustment for 1 mm thin plates Drefen Stripping Station Stripping Pre make ready table 1 die-cutting upper stripping frame with Quick Lock Upper and lower stripping equipment (pins, bars, tools, etc.) Delivery Non-stop delivery with belt convey Various 7.000 speed/h (depending on cardboard and type of iob feature) Normal die cutting plate 4 mm Centerline system for quick job changeover Elevated 300 mm Centerline System for Quick Job Changeovers

Condition: good (used), Year of construction: 1986, operating hours: 76,215 h, Console Centerline Feeder Motorized suction head unit Pile feeder with automatic lateral moving Universal Feeder Non-stop on feeder with swords Introduction table Sheet-hold down device (Introduction sheets guide in gripper) Pull-lay operator side (OS) adjustable according to Centerline, with sheet control Receiving pull lay of the push lay operator side PULL LAY OPERATOR OPPOSITE SIDE (OOS) PUSHING LAY FOR CORRUGATE OPPOSITE OPERATOR SIDE (OOS) Electronic double sheet device D-7 REINFORCED SHEET TRANSPORT EQUIPMENT for rigid and corrugate cardboard included: Introducers and upper belts - Upper transport elements (wide belts) By3Fpvw3L8 Adjustable sheet synchronizer while running, allows to adapt the feeder cycle to that of the platen Feed table with 4 front lays, adjustable in pairs with front register control Side-guided carrying straps Platin E-5 COMPENSATING PLATE. THICKNESS 4 MM. IN GROUND STEEL E-55 ADJUSTABLE SUPPORTING PLATE CENTERINGS Stripping Station 1 "GRID" UPPER PULL-OUT FRAME WITH ALL ITS STANDARD TOOLS CENTRAL PULL-OUT FRAME QUICK LOCK ON STRIPPING UNIT WITH ALL ITS TOOLS F-8 1 LOWER STRIPPING PULL-OUT FRAME WITH ALL ITS TOOLS F-22 Fastening equipment for stripping die (including crossbars and clamps) F-35 FASTENING EQUIPMENT FOR UPPER PULL-OUT FRAME QUICK LOCK DEVICE FOR STRIPPING (TO FIX STRIPPING TOOL TO THE UPPER PULL-OUT FRAME QUICK LOCK) F-2 : N. 1 Upper pull-out frame F-81 LOWER STRIPPING EQUIPMENT for waste stripping INCLUDING crossbars, pins and supports (installed on central pull-out frame F-8) Micrometric system with compensating plate and 1 mm small metals sheet Delivery Non-stop delivery with belt convey Safety sensors in delivery Guillotine device for front trim Various Elevated 350 mm

Condition: reconditioned (used), Year of construction: 2007, operating hours: 12,565 h, Machine B-28 INSTALLATION OF THE MACHINE WITHOUT EXCAVATION B-7 PLATFORM Macchina compatible with HIGHWAY TDF VIEW System Centerline system for quick job changeover Electronic device for sheet travel control Adjustable centering on delivery Control cabinet cooling unit C.U.B.E. (Control Unit Bobst Electronic) for machine operation Main motor with frequency variator Feeder Pile tray with handle allowing manual lateral correction on the pile during production Synchronization device timing the sheet arrival against the front lays when the machine is at a standstill Pile lifting controlled by Pressfoot Rear pile guide (OS and OOS sides) Side blowers adjustable with Centerline marks Suction unit Safety system for lowering the pile try C-4 NON-STOP FEEDER MANUAL DEVICE Platin Grippers re-opening device (Platin) Equipment centering and locking on platin Synthetic material supporting plate on platen (Thickness 23.5 mm (0,925") E-5 COMPENSATING PLATE. THICKNESS 4 MM. IN GROUND STEEL E-55 ADJUSTABLE SUPPORTING PLATE CENTERINGS 1 Upper chase-fixed bottom (E-1) By3Er3Bj2U 1 Cutting plate (E-4) Stripping Station Quick locking device of the central stripping board Motorized lifting of the upper frame 1 Upper Stripping Frame (F-2) 1 Upper stripping equipment (F-21) required to create a waste stripping tool, including crossbars, clamps, stripper holders and stripping pins of 3, 5 and 10 mm of diameter Fastening equipment for stripping die (F-22) 1 Adaption material for stripping board on the central frame (quick locking) (F-76) 1 lower pull-out frame (F-8) 1 Lower stripping equipment (F-81) Equipment for waste stripping including crossbars, pins and supports F-31 UPPER PULL-OUT FRAME QUICK LOCK DEVICE FOR STRIPPING ((decreases extraction tool assembly times. the quick-closing device allows the tool to be changed in the machine) F-35 FASTENING EQUIPMENT FOR UPPER PULL-OUT FRAME QUICK LOCK DEVICE FOR STRIPPING (TO FIX STRIPPING TOOL TO THE UPPER PULL-OUT FRAME QUICK LOCK) CENTRAL PULL-OUT FRAME QUICK LOCK ON STRIPPING UNIT WITH ALL ITS TOOLS Various The Autoplaten Presses SP 106-E are in conformity with the European Directives for the Safety and Health requirements related to its design and construction, sa well American standards UL 508 and NFPA related to industrial equipment Tavolo di introduzione Covered with an anti-static stainless steel plate Transport belts (with lateral guidance and automatic tensionning system) 4 front lays, adjustable in pairs with front register control "Pull" guide (OS) adjustable according to Centerline marks, with side register control Double sheet detector. Mechanical, integrated on pull guide (OS) Sheet-hold down device (guiding the sheets to front lays) Upper transport equipment for paper, paperboard and corrugated board C-5 SYNCHRONIZATION DEVICE TIMING THE SHEET ARRIVAL AGAINST THE FRONT LAYS WHEN THE MACHINE IS AT A STANDSTILL D-1 PULL GUIDE (OOS)

Condition: reconditioned (used), Year of construction: 1996, Various POLAR Electronic Programs Drefdf Flat color monitor AT = AutoTrim automatic cutting waste removal Central air table chromed Side air tables chromed Triangular chromed and blowing small side tables No. 2 Knives VIDIA

Condition: good (used), Year of construction: 1992, Console Retrofit computer and software SP 126 BMA FoilMaster 2024 Computer touch screen for forwarding band control; temperature control Feeder By3Cwiwe2A Non-stop feeder Pull lay operator side Platin No. 1 honeycomb Printing Units 16 heating zones Hot-Gold Foil System No. 3 shafts for pushing forward the bands Delivery Non-stop delivery with belt convey Various Speed 5.000 s/h Pile height Feeder max 1400 mm Delivery max 1100 mm Size min 350x500 mm / max 920x1260 mm Net weight 24 Tons Temperature from 50º to 160º All books, Manuals and Tools Dimensions Length 6,81 m Width 6,01 m Height 2.55 m Printing pressure 500 TON Paper 80/90 g/m2 - 1500 gr/m2 Elevated 350 mm

Condition: reconditioned (used), Year of construction: 1986, Feeder Put in & remove automatic feeder By3Bypaskw Printing Units 1 frame holder forms Various CE Certificate Tankle device Electronic equipment for the control of the production cycle of hot stamping of metallized strips and electronic regulation of the working speed Complete with die-cutting and hot stamping equipment

Condition: reconditioned (used), Year of construction: 1995, Feeder Put in & remove automatic feeder Various Resistors in the sandwich directly inside the machine does not require a heated plate Drefcr Electronic equipment for the control of the production cycle of hot stamping of metallized strips and electronic regulation of the working speed Complete with die-cutting and hot stamping equipment CE Certificate

Condition: refurbished (used), Year of construction: 2017, Number of working hours 2400 h Pressure power 110000 kg Speed 2500/2700 Sheets/h On offer here is a punch with hot foil from the brand APR Solutions. The machine is offered including warranty from the manufacturer! Model: Saroglia FUB/D 56x74 - Format: 56x74 cm - Year of manufacture: 2017 - Condition: Refurbished by the manufacturer (electronics as original) - Operating hours: 2400 - Feeding and delivery: Automatic - with hot foil - Punching: Up to 5 mm thickness - Speed: 2500/2700 sheets/hour - Paper weight: 80 - 1800 gr/sqm Bwriiqaahs - Pressure force: 110000 kg (110 tonnes) If you require further information, please contact us at any time!

Condition: excellent (used), Year of construction: 1998, operating hours: 46,000 h, Bobst 102 CER II Master Cut Year: 1998 Sheet Size: 1020 x 720 mm - 40 x 28 inches Hours: 46000 Equipped With: Central line Drc8Kh Stripping Unit Blanking Unit 9,000 Sheets Per Hour Non stop Feeder Non stop Delivery Made in Switzerland

Condition: reconditioned (used), Year of construction: 1988, operating hours: 106,000 h, Machine Centerline system for quick job changeover Bobst-Electronic for the machine control ELEVATED 650 mm OIL CONDITIONER BOX Feeder Motorized suction head unit Pile feeder with automatic lateral moving Non-stop on feeder with swords Universal Feeder synchronization to adjust the arrival of sheets to the registers Introduction table Adjustable sheet synchronizer while running, allows to adapt the feeder cycle to that of the platen Feed table with 4 front lays, adjustable in pairs with front register control Feed table with "Pull" guide (OS) adjustable according to Centerline marks, with side register control PULL LAY OPERATOR OPPOSITE SIDE (OOS) PUSHING LAY FOR CORRUGATE OPPOSITE OPERATOR SIDE (OOS) Electronic double sheet device Sheet-hold down device (Introduction sheets guide in gripper) D-7 REINFORCED SHEET TRANSPORT EQUIPMENT for rigid and corrugate cardboard included: Upper frame with pneumatic lifting device Side-guided carrying straps Platin Support plate with micrometric centering of the cutting sheet for thin plates, thickness 1 mm Drcyzv RESOCELL 22.5mm with 4mm compensation plate and 1mm metal sheet Stripping Station 3 points on lock system on ejection unit UPPER PULL-OUT FRAME QUICK LOCK ON STRIPPING UNIT WITH ALL ITS TOOLS Blanking Station 3 points on lock system on blanking unit Universal lower tool for blanket SHEET BRAKES DEVICE BY "BERNOULLI" SYSTEM ON BLANKING STATION UPPER PULL-OUT FRAME QUICK LOCK ON BLANKING UNIT WITH ALL ITS TOOLS Delivery Wrapper for interlayer sheet infeed Conveyor for automatic pallet change in delivery Various Speed 6.500 c/h All machine books, manuals and standard accessories

Condition: reconditioned (used), Year of construction: 1999, operating hours: 62,000 h, Machine Platform with safety barrier Centerline for job quick-change Electronic double sheet control Adjustable centering at the stripping and at the delivery Air conditioning for the electrical cabinet Gripper bars Main motor with frequency variator B-41 ADDITIONAL INTERFACE "CUBE". It includes an additional screen and keyboard located on the feeder, operator side, which facilitate the management of the machine. B-1 ELEVATED MACHINE Machine elevated 415 mm, included elevation of the steps Feeder Pile-tray with handle allowing manual lateral correction of the pile during production Photocells for automatic cycle on feeder Pile height control at the front edge thanks to a photoelectric cell Pile rear guide (OS and OOS sides) Adjustable lateral blowers with Centerline references Suction unit with multiple adjusting Safety system for lowering the pile try C-4 NON-STOP FEEDER MANUAL DEVICE C-5 CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGES C-8 VERTICAL POSITIONING OF THE SUCTION UNIT. Eliminates manual interventions to compensate for the flatness of the pile shape Introduction table Covered with an anti-static stainless steel plate Synchronization of the sheet adjustable at the stop, allows to adapt the speed of the feeder with which of the platin Imput on table feeder 4 front lays, adjustable in pairs with front register control Drcyxz Pull-lay operator side (OS) adjustable according to Centerline, with sheet control Double sheet detector Support plates at entry of platen station Sheet-hold down device (guiding the sheets to front lays) Upper frame with manual lifting device Upper sheet transport equipment for paper, cardbord and corrugate cardboard to 4 mm thickness Transport belt With lateral guidance and automatic tension system D-73 FEED BELT SLOW-DOWN DEVICE Ensures smooth arrival of sheets against the front registers D-3 PUSH GUIDE (OOS opposite operator side) WITH ELECTRONIC CONTROL useful for thick carton and corrugate Platin Grippers re-opening device Die-cutting device without band of gripper grip Equipment centering and locking Locking of the chase against the upper beam Measurement of the die-cutting force with strain gauge Resocell: synthetic material supporting plate. Thickness 22.5 mm 1 Upper chase with quick locking: fixed bottom (E-3) Plate, thickness 2 mm and make-ready protection plate of syntetic material, 1 mm thickness 1 Cutting plate (E-4) E-5 COMPENSATION PLATE 4 mm thickness. it's useful for thin plate for repetetive work E-55 ADJUSTABLE SUPPORTING PLATE CENTERINGS (MICROMETRIC) Stripping Station 3 drawer frames system with micrometric adjusting 1 Upper Stripping Frame (F-2) 1 Upper stripping equipment (F-21) required to create a waste stripping tool, including crossbars, clamps, stripper holders and stripping pins of 3, 5 and 10 mm of diameter 1 Fastening equipment for stripping die (F-22) 1 Central drawer frame (F-71) 1 Fastening equipment stripping table (F-75) 1 lower pull-out frame (F-8) 1 Lower stripping equipment (F-81) Equipment for waste stripping including crossbars, pins and supports F-9 PRE-SETTING TABLE : Adjustable. Allows the preparation of a second job during production, reducing machine makeready time and increasing the time available to run production. Requires: a series of supplementary stripping tools F-31 1 UPPER PULL-OUT FRAME QUICK LOCK. It reduces stripping tool assembly times; the quick-closing device allows the tool to be cha...

Condition: good (used), Year of construction: 2011, operating hours: 14,152 h, Machine Centerline system for quick job changeover Electronic device for sheet travel control Adjustable centering at the delivery Control cabinet cooling unit Bobst-Electronic machine operating system C.U.B.E. (Control Unit Bobst Electronic) This microprocessor based Bobst system allows the operator to easily control, visualize and check the various functions and elements of the machinewith color touch screen Main motor with frequency converter control 1 B-2 PLATFORM 1 PRESETTING TABLE Adjustable. It allows the stripping tools to be prepared outside the machine in perfect register with the die Feeder Pile tray wit handle allowing manul lateral correction of the pile during production Buknnuwdo8 Pile lifting controlled by pressfoot Real pile guides (OS and OOS) Side blowers adjustable with Centerline marks Suction unit Safety system for lowering the pile tray 1 C-111-001 MANUAL NON-STOP DEVICE Introduction table Covered with an anti-static stainless steel plate Inlet equipped with lateral ramps 4 front lays, adjustable in pairs with front register control "Pull" guide (OS) adjustable according to Centerline marks, with side register control Double sheet detector. Mechanical, integrated on pull guide (OS) Support plates at entry of platen station Sheet-hold down device (guiding the sheets to front lays) Upper frame with manual lifting device Upper transport equipment for paper, paperboard and corrugated board Transport belts (with lateral guidance and automatic tensionning system) C-140.001 CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGESAdjustable while running, adapting the feeder sinc to platen. Facilitates sheet feed correction to balance variation in processed materials Platin Gripper reopening device Equipment centering and locking Automatic locking of the chase against the upper beam Measurement of the cutting force with strain gauge Synthetic material supporting plate (Thickness 23.5 mm ( T-1 Upper chase : fixed bottom plate with plate, thickness 2 mm, and make-ready protection plate made of syntethic material, thinckness 1 mm. Cutting size limited to 705 x 1060 mm (27 3/4" x Cutting plate (T-12 Thickness 5 mm 1 E-1 ADJUSTABLE SUPPORTING PLATE CENTERINGS 1 E-210.001 COMPENSATING PLATE Thickness 4 mm. 1 T-1 UPPER CHASE WITH QUICK LOCKING : FIXED BOTTOM PLATE bottom sheet, 2 mm thick and synthetic shoplifting protection plate, 1 mm thick. requires a full size die 1 B- DEVICE FOR DIECUTTING IN-BETWEEN GRIPPERS (Stripping of small wast pieces is possible in front of 1st. knive (13 mm or 1/2") Stripping Station Quick locking device of the central stripping board on Waste Stripping Station Motorized lifting of the upper frame on Waste Stripping Station 1 Upper stripping pull-out frame (T-20 1 Upper stripping equipment (T-2) Equipment required to create a waste stripping tool, including crossbars, clamps, stripper holders and stripping pins of 3, 5 and 10 mm of diameter 1 Fastening equipment for stripping die (T-2 Including crossbars and clamps 1 Lower stripping pull-out frame (T.23 1 Lower stripping equipment (T-235.001) Equipment for waste stripping including crossbars, pins and supports 1 T-210.001 UPPER STRIPPING PULL-OUT FRAME QUICK-LOCKING DEVICE Reduces stripping tool assembly times. The quick-release device of the stripping tool allows the latter to be changed in the ...

Condition: good (used), Feeder ULTRASONIC DOUBLE SHEET DEVICE Stripping Station Drcugz STRIPPING STATION Various MACHINE FOR PVC AND PLASTIC MATERIAL DIE-CUTTING IONIZATORS DEVICE ALL NEW ELECTRONIC SYSTEM HOT DEVICE ON THE SHEET 180 Ton 4.500 speed/hour

Condition: good (used), Year of construction: 2002, operating hours: 21,588 h, Machine Platform safety barrier Centerline system for quick job changeover Electronic double sheet control Adjustable centering at the stripping and at the delivery Air conditioning for the electrical cabinet Gripper bars Main motor with frequency variator B-1 ELEVATED MACHINE Machine elevated 400 mm, included elevation of the steps B-42 ADDITIONAL INTERFACE "CUBE". It includes an additional screen and keyboard located on the feeder, operator side, which facilitate the management of the machine. F-9 PRE-SETTING TABLE : Adjustable. Allows the preparation of a second job during production, reducing machine makeready time and increasing the time available to run production. Requires: a series of supplementary stripping tools Feeder Pile-tray with handle allowing manual lateral correction of the pile during production Pile height control at the front edge thanks to a photoelectric cell Pile rear guide (OS and OOS sides) Adjustable lateral blowers with Centerline references Suction unit with multiple adjusting Safety system for lowering the pile try C-4 NON-STOP FEEDER MANUAL DEVICE C-8 VERTICAL POSITIONING OF THE SUCTION UNIT C-17 AUTOMATIC SIDE CORRECTION OF THE PILE Push lay opposite operator side Introduction table Covered with an anti-static stainless steel plate synchronization of the sheet adjustable at the stop, allows to adapt the speed of the feeder with which of the platin 4 front lays, adjustable in pairs with front register control Pull-lay operator side (OS) adjustable according to Centerline, with sheet control Double sheet detector Sheet-hold down device (guiding the sheets to front lays) Upper transport equipment for paper, paperboard and corrugated board Upper sheet transport equipment for paper, cardbord and corrugate cardboard to 4 mm thickness 4 Transport belts lateral guide C-5 CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGES Bukkuhvl8A D-1 PULL GUIDE (OOS) with device for sheet presence control. Pull adjustable with Centerline references D-3 PUSH GUIDE (OOS opposite operator side) WITH ELECTRONIC CONTROL useful for thick carton and corrugate D-73 FEED BELT SLOW-DOWN DEVICE Platin Grippers re-opening device Die-cutting device without band of gripper grip Equipment centering and locking Locking of the chase against the upper beam Measurement of the die-cutting force with strain gauge Resocell: synthetic material supporting plate. Thickness 22.5 mm 1 Upper chase with quick locking: fixed bottom (E-3) Plate, thickness 2 mm and make-ready protection plate of syntetic material, 1 mm thickness 1 Cutting plate (E-4) E-5 COMPENSATION PLATE 4 mm thickness. it's useful for thin plate for repetetive work E 55 ADJUSTABLE SUPPORTING PLATE CENTERINGS : micromeric screws allow fine adjustment of counters mounted on the cutting plate with respect to the die ( mm lengthwise and crosswise. E-56 LOWERING DEVICE FOR THE CHAINS-GUIDE Stripping Station 3 drawer frame system 1 Upper Stripping Frame (F-2) 1 Upper stripping equipment (F-21) required to create a waste stripping tool, including crossbars, clamps, stripper holders and stripping pins of 3, 5 and 10 mm of diameter 1 Fastening equipment for stripping die (F-22) 1 Central drawer frame (F-71) 1 Fastening equipment stripping table (F-75) 1 lower pull-out frame (F-8) 1 Lower stripping equipment (F-81) Equipment for waste stripping including crossbars, pins and supports B-23 SHEET BRAKING DEVICE USING BERNOULLI SYSTEM AT STR...

Condition: reconditioned (used), Year of construction: 1991, Machine Bukjwn9Znw Centerline Feeder Standard Feeder with all its equipment Non-stop device on feeder Pile height at feeder : With non-stop system (max. 1100 mm.) - Without non-stop system (max. 1.400 mm.) Platin Diecutting chase (fixed bottom plate) Normal die cutting plate 4 mm Stripping Station 1 die-cutting upper stripping frame 1 lower stripping frame with all its standard equipment Compete with aluminium bars, needles supports and needles Various Cutting force 250 TON Board quality processable : carta (min. 80g/m²); cartone (25 g/m²); corrugato "E" e "B" (max 4 mm.) Cutting size : with front trim ( max. 705 x 1020 mm.); without front trim (max. 720 x 1020 mm.) 7.500 speed/h (depending on cardboard and type of iob feature) All books, electrical scheme, manual instruction books, spare parts books and standard tools Adjustable grippers 8-17 mm Tavolo di introduzione Pull lay operator side

Condition: good (used), Year of construction: 2013, Feeder Additional blowers for papaer Photocells for sheet travel control for synthetic material Stripping Station Stripping Upper pull-out frame quick lock Nr 2 Upper pull-out quick lock frames Nr 4 lower stripping frame for needles Delivery NON-STOP conveyor in the delivery Various 6 Die cutting machine with heated plate for synthetic materials Bukh00Uunc

Condition: good (used), Year of construction: 1981, Various Photocells Computer Drcue7 Chromed blower tables

Condition: good (used), Year of construction: 2001, operating hours: 65,819 h, Machine Platform with safety barrier Centerline for job quick-change Electronic double sheet control Adjustable centering at the stripping and at the delivery Air conditioning for the electrical cabinet Gripper bars Bobst-Electronic machine operationg system C.U.B.E. : (Control Unit Bobst Electronic) Main motor with frequency variator M-5 CHASE CHANGER : allows the change and preparation of the chase and the die cutting corresponding to the next job (Includes an increase in the surface of the platform) B-41 ADDITIONAL INTERFACE "CUBE". It includes an additional screen and keyboard located on the feeder, operator side, which facilitate the management of the machine. B-1 ELEVATED MACHINE Machine elevated 415 mm, included elevation of the steps Feeder Pile-tray with handle allowing manual lateral correction of the pile during production Photocells for automatic cycle on feeder Pile height control at the front edge thanks to a photoelectric cell Pile rear guide (OS and OOS sides) Adjustable lateral blowers with Centerline references Suction unit with multiple adjusting Safety system for lowering the pile try C-17 AUTOMATIC SIDE CORRECTION OF THE PILE C-4 NON-STOP FEEDER MANUAL DEVICE C-8 VERTICAL POSITIONING OF THE SUCTION UNIT. Eliminates manual interventions to compensate for the flatness of the pile shape Introduction table Bukg7A9B3Y Covered with an anti-static stainless steel plate Synchronization of the sheet adjustable at the stop, allows to adapt the speed of the feeder with which of the platin Imput on table feeder 4 front lays, adjustable in pairs with front register control Pull-lay operator side (OS) adjustable according to Centerline, with sheet control Double sheet detector Support plates at entry of platen station Sheet-hold down device (guiding the sheets to front lays) Upper frame with manual lifting device Upper sheet transport equipment for paper, cardbord and corrugate cardboard to 4 mm thickness Transport belt With lateral guidance and automatic tension system D-1 PULL GUIDE (OOS) with device for sheet presence control. Pull adjustable with Centerline references C-5 CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGES D-2 PUSH GUIDE (OS operator side) D-73 FEED BELT SLOW-DOWN DEVICE Ensures smooth arrival of sheets against the front registers Platin Grippers re-opening device Die-cutting device without band of gripper grip Equipment centering and locking Locking of the chase against the upper beam Measurement of the die-cutting force with strain gauge Resocell: synthetic material supporting plate. Thickness 22.5 mm 1 Upper chase with quick locking: fixed bottom (E-3) Plate, thickness 2 mm and make-ready protection plate of syntetic material, 1 mm thickness 1 Cutting plate (E-4) E-56 LOWERING DEVICE FOR THE CHAINS-GUIDE E-3 1 UPPER CHASE WITH QUICK LOCKING: FIXED BOTTOM E-5 COMPENSATION PLATE 4 mm thickness. it's useful for thin plate for repetetive work E-55 ADJUSTABLE SUPPORTING PLATE CENTERINGS (MICROMETRIC) Stripping Station 3 drawer frames system with micrometric adjusting 1 Upper Stripping Frame (F-2) 1 Upper stripping equipment (F-21) required to create a waste stripping tool, including crossbars, clamps, stripper holders and stripping pins of 3, 5 and 10 mm of diameter 1 Fastening equipment for stripping die (F-22) 1 Central drawer frame (F-71) 1 Fastening equipment stripping table (F-75) 1 lower pull-out frame (F-8) 1 Lower stripping equipment (F-81) Equipme...

Condition: good (used), Year of construction: 1979, Feeder Pull lay Drcuej Various Thickness max. 4 mm Machine elevated Speed : 5000 sh/h