Langstaff-Ellis Limited

Condition: good (used), Renz DTP 340M Perforator Chsdpfx Aozyz E Ejc Tjb The machine is in very good condition, ready for production. Includes a Renz PBS 340 for mounting fixtures in plastic, and a waste container. Electric perforation device for closed spirals, screw-in spirals, or plastic spines from the German company RENZ: • Device for perforating paper, cardboard, or PVC with a working width of 340 mm, operated by a foot pedal • Perforates up to 35 sheets in a single cycle (depending on the module) • Quick and easy strip replacement • Can be equipped with strips with square, round, and oval holes in various sizes • Can be used with strips with a recess for hanging • All perforation strips for closed spirals are equipped with an individual needle shut-off option as standard, without having to remove the strip from the device • Can be connected to the WBS 360 manual clamping module Technical parameters: Maximum perforated material length: 340 mm Maximum perforated material thickness: 3.5 mm (up to 35 sheets) Dimensions: 36 x 49 x 25 cm Power supply: 230 V / 50 Hz Net weight: 40 kg Pitch: 2:1, 3:1 (depending on the type of strip installed) The set includes a tool 5.5 x 3.5 mm 2:1.

Condition: good (used), Renz Punch 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 perforation tool (4x4mm square) and a hanger cutting module. Side tables are also included. Manufacturer’s description: Perforating machine with a working width of up to 700 mm. Designed for continuous operation and heavy loads. Foot pedal-activated operation. Perforation of up to 40 sheets (4.5 mm) in a single cycle. Quick and easy replacement of perforation strips. Chsdpfx Aozyz Exoc Tsb Available with or without a hanger cutout. Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. The machine operates on a 3-phase, 380V power supply. Weight: 325 kg. Made in Germany.

Condition: new, Year of construction: 2024, Hard cover making table -Casemaker- The device is brand new, with a 12 month warranty. European production, based on branded subassemblies. Csdpfxozyz Ere Ac Tjhb Duty Cycle: The operator manually handles the covering material, to the gluing device in which the hot glue is automatically applied (operating temperature 60-70 ° C). A sheet of covering material with glue the operator places it manually on the suction table, then manually handles sheets of cardboard and spine. The pre-prepared cover is inserted into device manually, which winds up and glues the top and bottom of the covering material (patented brush system). During the sizing operation, the cover is pressed through the guide rolls. Covers leaving the unit are immediately ready for further processing The machine is equipped with: – gluing device for applying glue onto the top of the sheet – table with a suction – guides fixing the veneer and cardboard – wrapper module – delivery table Technical data: Max format: 840x500mm Min format: 100x100mm Performance: 100-150 covers / h Thickness of the covering material: 80-200 gsm Thickness of cardboard: 1-4mm Overlap covering material: 13-20mm Glue temperature: 30-100 ‚C Glue capacity: 2-3kg Smooth adjustment of the rotation speed of the rollers and brushes Types of covering material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1500x1000x1000mm Power supply: 380V Consumption: 3.7kW Machine weight: 500kg

Condition: good (used), Hang Piccolo 101-20 Eyeleting machine The machine is in perfect condition and ready to use. Made in Germany. Chedpszyz Elofx Ac Tob Technical specifications: 1 head Eyelet diameter inside the hole: 4 mm. Maximum capacity: 20 sheets of 80gsm Front margin: 40 kg. Foot pedal operation The machine punches, feeds, and crimps the eyelet in a single pass.

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Specifications: Mechanical clamping mechanism Power consumption: 170W Chedozyz Efopfx Ac Tob Power supply: 230V Machine weight: 80kg

Condition: good (used), Horizon VAC-100a + VAC-100c + SPF-20A + FC-20A Booklet Maker Machine setup is via the control panel. Made in Japan. The line consists of: – Horizon VAC-100A / VAC-100M Max size: 350x500mm Min size: 120x148mm Vacuum feeding 10 shelves Stack height: 55mm Basic weight: 40-270g 230V power supply Weight: 310kg/piece Touchscreen control Jam, double-feed, and no-feed sensors Ability to save 9 preset jobs to the machine’s memory Horizon SPF-20A Max size: 500x350mm Min size: 120x180mm Wire stitching Folding Two Hohner heads Horizon FC-20 Cutting thickness: 88 sheets 230V power supply Weight: 240kg Chedpezyz D Ujfx Ac Tob Touchscreen control panel for quick format changes. With a single click, you can retool the machine for a different format. 230V power supply Weight: 490kg The machine includes: delivery, PJ-77R jogging machine, operating tools, additional components, and documentation.

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual Chjdpfxezyz D Io Ac Teb – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: good (used), Com J240/30 Banding Machine on a Base Codpfx Acjzyz Dus Tjhb One of the most recognizable banding machine manufacturers on the market, manufactured in Japan. The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone structure with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for packaging business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Performance: 26 cycles/min Dimensions of the banded product: 240 x 150 mm Made in Japan. Weight: 70 kg.

Condition: good (used), Akebono OB-360 Banding Machine This machine is in very good condition and has been serviced. One of the most recognized machines in the world. The latest model. The machine operates in manual or automatic mode. Csdpfx Ajzyz Dnsc Tshb After inserting the material, the machine wraps it with tape, compresses, and seals it to create an elegant package. Ideal for wrapping business cards, flyers, calendars, and other materials. Can be used with paper or foil tape. Technical specifications: Tape width: 29 mm Cycle speed: 28 cycles/min Frame dimensions: 420 x 210 mm Length: unlimited Weight: 40 kg. Made in Japan.

Condition: good (used), Foellmer 45 ME Creaser The machine is in very good technical and visual condition. One owner since new. This is the newest model, currently in production. Codpfxozyz Dhe Ac Tehb The machine has a working width of 450 mm. 380V power supply. Equipment includes a creasing bar, front margin, and side margin. This creaser is recommended for larger runs. It is quiet and powerful thanks to its geared motor drive. It is operated by a foot pedal.

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Chodpfx Ajzyz Dbsc Tob Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Double-feed detection Weight: 240 kg Power supply: 230 V Made in Japan.

Condition: good (used), Laminator Bagel Digifav 520 B2 automatic laminating machine The machine is 100% functional, in perfect condition, ready for production. Very low mileage. It is an advanced, high-performance machine dedicated to digital printing houses. Production Spain. Technical data: Max sheet size: 520mm x 720mm Min sheet size: 220mm x 220mm Min weight: 130 gsm Max grammage: 350 gsm Operating temperature: 80-145°C Max working speed: 22m/min Weight: 750 kg Power supply 380V Additionally, 6 Bar air A steel, chrome-plated cylinder with a large diameter, filled with oil for greater operational stability. Pneumatic pressure, separation and automatic feeding from a high stack. Adjustable pressing force. Expanding shaft for attaching the foil, mounted on a tilting arm. Touch panel for easy operation. Sheet straightening module. Receiving table. Codpfszyz A Rjx Ac Tehb Ask about the product

Condition: good (used), Foliant Vega 400A Laminating Machine The most equipped laminating machine in Foliant’s offer. Fully automatic machine, ideal for digital printing. Very good condition. Year of manufacture: 2015. Chedpfx Aszyz A Djc Tob Description: – High stack feeding (elevator) – Automatic separator – Pneumatic roller pressure – Sheet straightening module – Built-in compressor for blowing and vacuum (Becker) – Jogger on the sheet outlet Feeding system: Pneumatic belt Feeding stack height: 30 cm Max. Capacity: 2100 B3 sheets/h Maximum lamination speed: 18 m/min Temperature: 20 – 140°C Heating time: 8 min Installed power: 3000 W Power supply: 230V Weight: 320 kg Made in the Czech Republic.

Condition: good (used), Horizon BQ-270V Perfect Binder Machine in very good condition. Chodpfjzyz Aqsx Ac Tjb In addition, the machine is equipped with the DV-270 unloading module. Ready to work. Very low mileage. Manufacturer’s description: Professional binder for perfect softcover. Fully automatic binder with an exceptionally stable type of construction, equipped with a hot glue gluing device, effective also for small and very small quantities of legs or sheets. The Horizon BQ-270V binder is a single-jaw machine with automatic cover feeding, which, operated by one person, delivers impeccably bound books in consistently high quality. Standardly equipped with a scanner measuring the thickness of the insert, it allows you to glue books using the „on demand” technology. Binds books with a thickness of 0.5 to 50 mm and a spine length of 135 to 320 mm with a maximum number of copies up to 500 books/hour. Factory-built cutter with additional cutting knives. Maximum milling depth up to 3 mm. Automatic cover feeding using a suction drum with a certain, constant setting relative to the bound sheets. A factory-built installation creating 4-fold creases on the cover, which is set automatically with precise adjustment. As an option, 6 creases can be installed for gluing books with bookmarks

Condition: used, mileage: 2,328,985 km, power: 427 kW (580.56 HP), first registration: 09/2005, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro3, suspension: steel-air, Year of construction: 2006, Equipment: EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), power mirror, retarder, spoiler, = Additional options and accessories = - Aluminum fuel tank - Roof spoiler - EPS (Electronic Power Steering) - Side door = Additional information = Front axle: Steered; Suspension: Leaf spring Rear axle: Suspension: Air suspension Unladen weight: 7,500 kg Payload: 10,500 kg GVW: 18,000 kg Overall condition: poor Technical condition: moderate Optical condition: moderate Reference number: 89 Vehicle number: 89 Mercedes-Benz Actros 1858 V8 / Megaspace / Retarder / Euro 3 Chsdpfozyz Akox Ac Teb .: WDB9340321L007555 Transmission: Semi-automatic Suspension: Leaf / Air Air conditioning Retarder Engine brake Cruise control Euro 3 No liability for printing and typographical errors, changes, prior sale and errors. = Company information = No liability for printing and typographical errors, changes, prior sale and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Condition: excellent (used), Workpiece dimensions: Data Workpiece length = 260-3000 mm Working width = 50-230 mm Working height = 10-70mm Cross conveyor table specification: Conveyor length = 2200 mm Conveyor width = 1000mm Adjustable overall height = 810 mm Number of flat crossfeed chains= 5 ( 80mm, 280mm, 500mm, 900mm and 2200mm) Feed speed = 18 m/min Feed motor = 0.75 kW (1 hp) Accelerator specification: Feed roller width = +/- 50 mm Driven feed rollers = 4pcs (2 top, 2 bottom) Feed motor, hydraulic = 5.5kW Feed roller diameter = 170mm upper and 100 mm lower Codpfxezyz Adj Ac Tshb Infeed speed infinitely variable = 20-140 m/min Max.cycle rate/min. = 60

Condition: good (used), Thalmann Pico 1mm steel - 1.75mm aluminum The machine was recently inspected and adjusted by a professional. It is in perfect working order and ready for immediate use. Cedpfx Acszyzz Te Tjhb It bends all angles precisely up to a length of 6 meters. The shears are sharp and cut electrically. The control is simple and includes a foot pedal. Testing under power is possible – a forklift is available on site. The machine is privately owned and is being offered here as a friendly service (facilitated sale). Private sale – near Heilbronn.

Condition: used, functionality: fully functional, Year of construction: 2005, type of cooling: water, overall weight: 15,000 kg, total length: 10,000 mm, total width: 4,000 mm, total height: 25,000 mm, year of last overhaul: 2024, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, ITEC AG laser cutting system for circuit boards. The system consists of the following components: Cjdpozyzzyefx Ac Tehb ITEC AG cell with granite bed, 3-axis Motoman NX 100 robot, vacuum manipulator RIEDEL L 21/8 TR 3.00 cooling system GSW Schwabe AG straightening machine MHR 2.5mm / 1250mm / 7 rollers GSW Schwabe AG coil handling system VRMA 80/76 The circuit boards are fed from the coil (GSW Schwabe AG, MHR 2.5/1250, general overhaul in 2022) into the straightening machine (GSW Schwabe AG, VRMA 80/76). The PDFs with technical data are attached. The laser portal for the TRUMPF TF is mounted on a solid granite bed, which guarantees absolute repeatability. The Motoman robot picks and places components using a vacuum manipulator and camera. The system has been continuously maintained and is in production-ready condition. Before dismantling, the system was cleaned, and all liquids and coolants were evacuated.

Condition: good (used), Year of construction: 2002, 1 used travelling crane Manufacturer: Kaltenbach Type: WK 1 Year of manufacture: 2002 Chedpfx Aozyzxxsc Teb Weight: 3,500 kg Load capacity: 250 kg 3-wheel model, with electric chain hoist 250 kg, Demag

Condition: excellent (used), Slot drilling machine Manufacturer: Schleicher Year of manufacture: 1996 Single-lever operation Drill chuck: 20 mm Dowel drilling attachment Miter stop, adjustable from 0° to 45° Mobile Height adjustment with foot pedal Chodpfezyzxrex Ac Teb

Condition: excellent (used), functionality: fully functional, Manufacturer Siemens Chedpozyzw Uofx Ac Tsb Power 11 kW Speed 1455 rpm

Condition: excellent (used), functionality: fully functional, Manufacturer ATB Antriebstechnik G. Bauknecht AG Power 15 kW Speed 1460/min Chsdpozyzw Iefx Ac Tjb

Condition: excellent (used), Format circular saw Manufacturer: Altendorf Type: F 45 Motor: 5.5 kW Carriage length: 3200 mm Cutting width: 1300 mm Tilts up to 45° Height adjustment: hydraulic Csdpjzyzwuofx Ac Tohb Tilt adjustment: hydraulic Prepared for scoring saw In very good condition

Condition: used, mileage: 382,000 km, first registration: 03/1998, fuel type: diesel, fuel: diesel, Year of construction: 1998, MAN FE 18.264 FBL A3 tank truck for diesel and heating oil, 2 compartments, 10,250 liters !!TANK AND PUMP TRUCK!! !!TANK CLEANING VEHICLE + TANK TRUCK!! !!Very good overall condition!! Equipment of the truck: • EURO 3 + PMK • 260 hp • Engine displacement: 6,871 cm³ • 8-speed manual transmission - dual H-pattern • Cruise control • Engine brake • Differential lock • Leaf / air suspension • Radio - CD player • On-board computer • Horn • Driver airbag • Sunroof • 1 x tank, 250 liters • Wheelbase: 3,900 mm • Unladen weight: 7,600 kg • Payload: 10,400 kg • GVW: 18,000 kg • Tires: 295/ 80 R 22.5 • Tire tread: 15/15 10/11 11/11 mm TANK BODY: ESTERER • Year of manufacture: 1998 • For diesel and heating oil • 2 compartments • 6,200 + 4,050 liters = 10,250 liters • FMC measuring system from Sening, type GMVT 703-J • TKZ system (temperature-compensated meter) • Printer • 2 x hydraulic hose reels • ADR compliant! • Tank inspection valid! Tank cleaning system: Küller Fahrzeugbau • Year of manufacture: 1998 • Water tank capacity: 1,600 liters Csdpfxozyzwhe Ac Tjhb • Test pressure: 4 bar - German vehicle! - MOT/TÜV: NEW! Subject to errors and prior sale.

Condition: used, mileage: 737,000 km, first registration: 04/2019, fuel type: diesel, fuel: diesel, Year of construction: 2019, MAN TGX 26.500 FLL 6x2 chassis (formerly a silo vehicle) • Emission standard: EURO 6C • XLX cab • Retarder / Intarder • 16-speed manual transmission • Distance control cruise control • Lane assistant • Emergency braking assistant • Hill start assist • Differential lock • Automatic climate control • Auxiliary heater • Spoiler • Refrigerator • Telephone • Multifunction steering wheel • Heated driver's seat • Large radio with navigation • CB radio Codpszyzwbofx Ac Tjhb • Hands-free system • Sleeper cab with 2 beds • Central locking • GVWR: 26,000 kg • Wheelbase: 4,600 mm • Vehicle dimensions: 9,550 x 2,500 x 3,900 mm (LxWxH) • Frame length: 7,100 mm (cab to end of chassis) • Tires: 315/70 R 22.5 • 3rd axle can be lifted and steered - MOT / Inspection: new! - German vehicle! - 1st owner! Subject to errors and prior sale!