Herschelmann

Condition: used, working width 750 mm Lodpfx Aoy Erymempsaa working length 3.000 mm length ~ 3.850 mm width ~1.000 mm height ~ 2.000 mm Hydraulic veneer press Ott type 300 K75 for gluing veneers, timbers, beams or other pressing tasks. Heating plates without function.

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Rack compensation Main switch Safety pull cord CE marking Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Number of pressing cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Lodpfsy Egkgsx Ampjaa Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: used, table width: 1,400 mm, table length: 2,800 mm, total length: 6,600 mm, total width: 2,500 mm, total height: 2,600 mm, No. 3266 Feed-through veneer press Ott D 99 Used Short-cycle feed-through veneer press Pressing surface 2600 x 1400 mm LW Maximum opening width 150 mm Specific pressure 5.0 - 6.0 kg/cm2 Infeed conveyor belt, length 2800 mm Outfeed conveyor belt, length 2800 mm Transport dimensions approx. 6600 x 2500 x 2600 mm LWH Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Laodjy A Rhkspfx Ampea Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, Year of construction: 1979, Pressing area: 2200 mm x 1100 mm Opening: 360 mm Heating: electric Plate surface: aluminium Emergency stop: no Pressing force: 65 t Number of cylinders: 4 Power consumption: 21 A Laodpfx Asy A Hkbompoa Machine length: 2500 mm Machine width: 1300 mm Weight: 2600 kg

Condition: used, Year of construction: 1993, pressing area: 3000mm x 1900mm pressing units vertical: 3 pressing units horizontal: 2 Laedpfx Amjy A Hkzepoa pressing system: elctro - hydraulic machine length: 3500mm machine width: 1000mm machine height: 2600mm waight: ca. 900kg

Condition: used, Year of construction: 1979, Press length: 3000 mm Press depth: Vertical pressing elements: 6 Horizontal pressing elements: Pressure system: pneumatic Pressing pressure: per cylinder Cylinder stroke: mm Hold-down device: no Machine length: 2700 mm Lajdpfx Asy A Hkhompsa Machine width: 1000 mm Machine height: 1400 mm Weight:

Condition: used, pressing force: 100 t, table width: 1,350 mm, table length: 2,550 mm, total length: 3,150 mm, total width: 1,550 mm, total height: 2,150 mm, overall weight: 5,000 kg, No. 04525 Veneer press Ott 300 K 2513 Used Very sturdy design with 4 longitudinal beams in the upper press section and 4 longitudinal beams in the press table Plate dimensions 2550 x 1350 mm LW Total pressure 100 tons Electric heating, replaceable heating elements Heating plates made of solid aluminum, covered with Mylar film Maximum temperature 150 °C Specific pressure 3.0 - 5.0 kg/cm2 4 press cylinders, each 90 mm in diameter Rack-and-pinion guide for the press table Lodpfsy Aplzjx Ampjaa Button controls for Open – Close – Stop Circumferential emergency stop pull cord, configured for two-hand operation Opening width continuously adjustable up to approx. 420 mm Automatic pressure regulation via high-pressure gauge Pressure preselection table with 2 specified values for each workpiece size Transport dimensions approx. 3150 x 1550 x 2150 mm LWH Weight approx. 5000 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: Ex warehouse

Condition: used, Year of construction: 2008, machine/vehicle number: 10322T, functionality: fully functional, pressing force: 120 t, stroke length: 355 mm, table width: 1,560 mm, table length: 3,100 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,080 mm, overall weight: 9,000 kg, Equipment: documentation/manual, We offer this used Interwood HOP veneer press, year of construction 2008. Location: Maryport, Cumbria, UK 18000GBP (with VAT) 15000GBP exVAT Open to offers 20m cable and distribution box included in price. Type: HOP Ledpoy Ah T Rsfx Ampoaa Serial number: 10322T Year of manufacture: 2008 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Technical data: Number of pistons: 6 Piston diameter: 80 mm Connection to central heating (CO) Shelf dimensions: 3000x1300 mm Clearance: 395 mm Hydraulic pressing 6 pneumatic side clamps Safety switch Motor power: 1.5 kW Power supply: 400 V Lodpfjyz T Anjx Ampeaa Overall dimensions: Length: 3650 mm Width: 2100 mm Height: 2040 mm

Condition: used, Year of construction: 2014, machine/vehicle number: 1995880, This Joos hydraulic press, model: HP S 1000/OK, is being auctioned online in our industrial/machinery auction due to the closure of the ContiTech Transportsysteme location. Ljdpfx Ameyz Siyspeaa

Condition: ready for operation (used), functionality: fully functional, hydraulic PRESS with hot platens by with thermal oil model COLOMBO REMO HPC 150 second hand machine Lodpfx Ameyyzwdjpoaa DRILLED SOLID STEEL PLATEN for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3450 x 1400 n.08 cylinders diam.mm. 80 max. thrust Ton. 150 intermediate worktop ( 3 worktops , 2 work compartments ) hydraulic pump motor power Hp 4 heating by with thermal oil weight kgs. 9.000 / 10.000 volt. 380/50

Condition: ready for operation (used), functionality: fully functional, Hydraulic press "TIGER" model TM6B Code: PRS-041 Laedpfxjyyv Svj Ampja USED MACHINE – V380/50 Table dimensions: 3000×1300 mm Table heating: hot water Prepared for connection to central heating system 6 cylinders Ø 70 mm Serpentine plates with NEW aluminium cladding

Condition: good (used), Year of construction: 1982, Plate dimensions 2200 x 1100 mm Daylight opening 350 mm Number of daylights 1 St. Heating elektrisch Total pressure 65 to Motor output 1,1 kW Dimensions (L/W/H) 2540 x 1280 x 1900 mm weight of the machine ca. 2500 kg Ljdpfeyyqnxsx Ampeaa

Condition: excellent (used), Year of construction: 1991, Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch Main switch Two-stage hydraulic pump with automatic changeover valve from low to high pressure Safety pull cord Rack compensation CE conformity Pressing area: 2,500 x 1,300 mm Number of press cylinders: 4 Total pressing force: 90 t Stroke height: 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Space requirement (L x W x H) approx.: 2,900 x 1,250 x 1,900 mm Weight: approx. 3,800 kg Request more information NEW MYLAR FILM on both heating plates Lajdpfxeyyn Rdo Ampja NEW hydraulic cylinder seals Used machinery notice: • Technical data subject to errors and prior sale. • Prices quoted are ex works – free loaded! • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at their location. • Special agreements are only valid in written form. (Your inquiries will only be answered with your address and telephone number!)

Condition: ready for operation (used), Shelf length 2500 mm Shelf width 1200 mm 4 hydraulic pistons 75 mm Clearance 400 mm Lsdpfx Aeyynzpjmpeaa Water heating

Condition: excellent (used), functionality: fully functional, shelf length 3500 mm shelf width 1300 mm 8 hydraulic cylinders cylinder diameter 85 mm integrated oil heating Lsdpfxoyxwzce Ampsaa power supply 380V

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Lasdeyxp Twopfx Ampoa Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: used, Year of construction: 1984, pressing area: 3000 mm x 1350 mm opening: 400 mm heating: electrically plate sourface: alu emergency stop switch: yes / ripcord pressure: 140 t number of cylinder: 8 Ledpoyxgaujfx Ampsaa electriticy: 34 A motor power: 22,4 kW machine length: 3550 mm machine width: 1550 mm

Condition: used, Year of construction: 2004, functionality: fully functional, ORMA NPC-4-70 Shelf Press – after technical inspection, ready for operation Specification: • Condition – used, fully serviced • Manufacturer – ORMA • Model – NPC-4-70 • Shelf dimensions: 250 x 130 cm Ledpfsyxdluex Ampjaa • Max. clearance between shelves: 480 mm • Shelves are straight, clean, with no dents/damage • 4 cylinders with 70 mm diameter • Max. pressure: 300 bar • Max. pressing force: 70 tons • Automatic pressure compensation in case of pressure drop • Shelves convertible for water/glycol or oil heating • Circulation pump and heating boiler included • Maximum power consumption: 20 kW • Equipped with safety pull-cord • Original paint finish • Weight approx. 3,000 kg • Year of manufacture: 2004 • Overall dimensions: 310 x 190 x 210 cm (L x W x H) Additional Information: • Good technical condition, after complete seal replacement • Photos show the actual item for sale • Possibility to power on and inspect the machine on site • Auction price excludes VAT and transport costs Financing & Transport: • We organize transport using MDD fleet, courier services, or external carriers • Financing options available through leasing or lease-loan arrangements

Condition: excellent (used), Shelf length 2500 mm Shelf width 1300 mm 4 hydraulic pistons Clearance 400 mm Water heating Lsdpfsyw H H Ssx Ampoaa

Condition: good (used), Year of construction: 1990, 1x HOT PRESS for VENEER “SORMEC” TYPE 350X130 Hydraulic hot press for wood, panels, furniture, doors, composites, and various materials Technical data: Ledpfx Ameyv Izbspoaa Platen dimensions: 3500 x 1300 mm 1 USEFUL WORKING PLATE Platen heating by hot water Total pressure: 50 tons Opening: 300 mm 8 cylinders, diameter 85 mm Water boiler not included Overall dimensions: 4500 x 1600 x 2500 mm (H) Weight: approx. 5000 kg Second-hand, in good condition

Condition: used, Year of construction: 1975, functionality: fully functional, power: 24 kW (32.63 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 115 t, table width: 1,250 mm, table length: 3,000 mm, total length: 3,520 mm, total width: 1,460 mm, total height: 2,140 mm, overall weight: 3,500 kg, • Outer dimensions: L 3520 x W 1460 x H 2140 mm • Weight: approx. 3.500 kg • Total installed electrical power: 24,1 kW, main supply fuse: 25 A • Power supply: 3Ph 380 (400) V • Press area: 3000 x 1250 mm • Press force: 115 t • Specific pressing pressure: 30 N/cm2 (3,1 kg/cm2) • Operating hydraulic pressure: 380 bar Ledjyv H Rhepfx Ampsaa • Cylinder (piston) diameter: 80 mm

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Bürkle veneer press S 80, year of manufacture approx. 1982, overall dimensions: 3080 x 1550 x 1800 mm, weight 4500 kg, 80 t pressing force, 6 cylinders, pressing area 2500 x 1300 mm, heating plates have been tested, hydraulic drive, robust construction, good condition, fully functional. Price ex works. Shipping available at extra cost! Lsdpoyvhkvefx Ampjaa

Condition: used, used, good condition Manufacturer Joos Model HP65/2 1 level Lasdpeyu U Evjfx Ampja Plate size approx. 2500 x 110 mm Opening width approx. 360 mm Side guide Electric heating Aluminium plates Piston diameter 80 mm 4 lower pistons Space requirement approx. 2900 x 1300 x 1900 mm Weight approx. 3200 kg Total connected load 15.4 kW Storage location 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition, without warranty or guarantee

Condition: used, used, in good condition Manufacturer: Joos Model: HP65/2 Machine no.: 79/9 510 1 deck Cover plates - natural aluminum GS tested Panel size: 2500 x 1100 mm Opening width approx. 360 mm Tip control Safety device: foot rail - shutdown Side guide Lajdpfx Amsyu U D Sopja Electric heating Piston diameter: 80 mm Lower pistons: 4 units Space requirement approx. 2900 x 1300 x 1900 mm Weight approx. 3200 kg Total connected load 15.4 kW Stock location: 97447 Gerolzhofen, loaded free, unpacked Delivery in current condition as inspected, without guarantee or warranty