Nemec Lampenschirme & Leuchten

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 133504, MACHINE DETAILS Dimensions (L x W x H): approx. 9,000 x 6,000 x 2,800 mm Voltage: 400 V AC Frequency: 50 Hz Fuse rating: 1,700 A Rated current: 150 A Power supply system: TN-S Supply pressure: max. 10 bar Operating pressure: 6 bar Compressed air connection: G ½ inch Cjdpfxe Ah Em Ns Ap Dohd Compressed air quality: ISO 8573-1, cleaned and oil-free Ambient temperature: 10–45 °C Relative humidity: 20–80 % (without condensation) Noise level: < 78 dB(A) EQUIPMENT Suitable for operating environments with low dust and dirt levels, as well as oil vapors and humidity. Note: Further technical details can be found in the attached documents.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Rated power at 50% duty cycle: 25 kVA Max. welding power: 107 kVA Adjustable reach: 140–500 mm Welding specifications – Steel: 6 + 6 mm Brass: 3 + 3 mm Codpfx Ape Ahw Ups Dehd Aluminium: 1.2 + 1.2 mm Adjustable electrode force: 17–278 daN Cooling water flow rate: 4 l/min Weight: 240 kg Welding control unit: DALEX MPS 1036 Operating instructions and electrical diagrams are available Working stroke triggered by pneumatic foot pedal Well-maintained condition

Condition: excellent (used), Water-cooled chiller with refrigeration compressor Manufacturer: DALEX, Type: ES 1 Cooling capacity: 870 W Includes connecting cable and mains plug. Chsdpo Ahqtrofx Ap Dod

Condition: excellent (used), Locking device Manufacturer: DALEX, Type: VI 5T Cedpfx As Ahfilop Dehd Designed to limit network load Suitable for connecting 5 resistance welding machines.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 28913707-1, Offer 24014 Technical specifications: - Rated power at 50% duty cycle: 40 kVA - Max. welding power: 118 kVA - Adjustable overhang: 225 - 550 mm - Welding parameters: - Steel sheet: 4 + 4 mm - Brass sheet: 2 + 2 mm - Aluminum sheet: 1 + 1 mm - Adjustable electrode force: 65 - 390 daN - Required air pressure: 6 - 10 bar - Cooling water flow rate: 8 l/min - Control for: holding time, welding time, - post-weld time + open time, as well as - pulse time + pause time - Voltage: 380 V - Space requirement: approx. W 600 x H 1350 x D 1550 mm - Weight: approx. 330 kg - Includes: - Complete electrical and pneumatic system Chjdpfx Apo Agunho Djd - 6-time synchronous control MPS 1036 - Foot switch

Condition: excellent (used), Water-cooled chiller with refrigeration compressor, mobile Manufacturer: DELTATHERM, Model: LT 4 Cooling capacity at 20°C: 5.1 kW Cjdpfx Apo Aggkgj Dohd Compressor power: 1090 W Pump power: 0.65 kW Tank volume: 30 l Weight: 110 kg

Condition: good (used), Equipment: documentation/manual, - 15 kVA - Maximum sheet thickness: 3 + 3 mm - Outreach: 340 mm - Adjustment of welding power - Adjustment of welding time - Documentation - 400V Cjdj Af Nd Hspfx Ap Dohd This spot welding machine comes from a technical school and has been used very little.

Condition: used, Year of construction: 1992, machine/vehicle number: 920544, current capacity:100 kVA throat:280 mm capacity at 50%:100 kVA pressure:1,1 t stroke:100 mm table-size:180 x 170 mm control:MPS-29-K-S-R total power requirement:279 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,15 x 2,1 m Cedpfx Aj Ad Shvjp Dohd spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off

Condition: excellent (used), Water-cooled chiller with refrigeration compressor Manufacturer: DELTATHERM, Type: LTk 3 Refrigeration capacity at water temperature 20°C: 3.2 kW Compressor power: 1.1 kW Chodpfx Aps Adt Spj Djd Pump power: 0.65 kW Water tank capacity: 30 l Mains connection: 230 V, 50 Hz

Condition: used, Year of construction: 2004, operating hours: 2,000 h, functionality: fully functional, input voltage: 240 V, input current: 2 A, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used Miyachi MDB-2000B spot welding machine, year 2004. Input voltage: 200–240 V Frequency: 50/60 Hz Input current: 1.5 A It utilizes a polarity-reversing system, ensuring reliable performance at every welded spot. Throughout the entire welding pulse, it monitors both voltage and current, thereby minimizing undesirable effects. Selectable current ranges: 250 A, 500 A, 999 A, 3.00 kA RS-485 communication Csdpjz S Dy Ijfx Ap Dehd Dimensions: 172 x 423 x 270 mm Weight: 19 kg Power consumption: maximum 300 W The system also includes two mechanical setups for battery welding (see photos). They consist of frame with pneumatic drives and necessary end switches for proper triggering of operation. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Pressure: 6 bars Voltage: 380 V Width: 1100 mm Depth: 500 mm Chjdpfx Apjz I Dgfs Dod Total height: 1500 mm Weight: approx 500 KG

Condition: refurbished (used), Power at 50%: 25kVA Short circuit-current: 22,4kA Electrode force: 17-178daN Throat depth: 180-500mm Chedoz Alfnspfx Ap Dsd --- Weld control: RS 17 (5-times, 2-program) --- Extra Equipment: - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: excellent (used), pneumatically operated, water-cooled spot welding pliers with manual control valve Manufacturer: DALEX, Type 3238 Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Arm spacing: 130 mm Arm extension: 500 mm with double-acting cylinder: long stroke 75 mm, pre-stroke 50 mm, working stroke 0-25 mm Cjdpez Ak H Dsfx Ap Djhd with universal joint suspension and clamping bow 10 m connection cable with control cable also included: 1 piece DALEX synchronous control unit RS 12 with 3 m connection cable and 32 A CEE plug

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Medium-frequency spot welding machine – also suitable for welding aluminium. Rated power at 20% duty cycle: 180 kVA Chodpfx Aszz Ripsp Djd Max. welding power: 315 kVA Adjustable reach: 300 to 800 mm Arm spacing (min/max): 150–400 mm Electrode stroke: parallel stroke Electrode force adjustable up to 600 daN Weight: approx. 660 kg Welding control unit: Dalex L 4-6 Cooling water flow rate: 10 l/min Operating instructions and manual are available Working stroke triggered by pneumatic foot pedal Very good, well-maintained condition

Condition: excellent (used), pneumatically operated, water-cooled spot welding tongs Manufacturer: DALEX, Type 3329 with double-acting cylinder, long stroke 60 mm, pre-stroke 40 mm, working stroke 0-20 mm Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 17 kA Cedpezymccjfx Ap Dshd Secondary open-circuit voltage: 4.7 V Electrode force: 440 daN Arm outreach: 350 mm Arm spacing: 300 mm with universal joint suspension and suspension bracket 10 m connection cable and control cable with Harting connectors for connection to auxiliary control unit B 200 with synchronous welding control MPS 10

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00117, type of input current: three-phase, nominal power at 50% duty cycle: 90 kVA, input voltage: 400 V, type of cooling: water, welding power (max.): 245 kVA, nominal power (apparent): 90 kVA, air pressure: 6.5 bar, input frequency: 50 Hz, Equipment: type plate available, TECNA 2117 industrial DC inverter resistance welding machine, manufactured in Italy in 2004. The machine was previously used in production for resistance welding of aluminum trays. Chodjzx D Tcopfx Ap Dsd It is offered as a complete welding system as shown in the photos, including the custom-built supporting base/workstation and the integrated water cooling/chiller system used for cooling the welding arms and electrodes. The machine is equipped with programmable electronic welding control, pneumatic electrode actuation, program selection, and water-cooled welding electrodes. Technical specifications: Manufacturer: TECNA Model / Item: 2117 Serial No.: 00117 Year of manufacture: 2004 Type: DC inverter resistance welder Supply voltage: 400 V Frequency: 50 Hz Phases: 3 Nominal power at 50% duty cycle: 90 kVA Maximum welding power: 245 kVA Secondary no-load voltage: 9.4 V Maximum welding current: 32 kA Maximum electrode force: 736 daN Water cooling requirement: 10 l/min Compressed air supply pressure: 6.5 bar TECNA machine net weight: 178 kg Equipment and features: Programmable electronic welding controller Multiple welding program selection Pneumatic welding head Copper welding electrodes Water-cooled welding arms/electrodes Custom-built supporting base/workstation Integrated water cooling/chiller system Pressure regulation and pressure gauge Emergency stop Three-phase industrial power supply The complete assembly shown in the photos is included in the sale, including the TECNA welding machine, control equipment, custom-built supporting structure, and cooling/chiller unit. Previously used in an industrial production environment for welding aluminum trays. The machine is currently installed on its supporting structure and is available for inspection in Greece. EXW Greece. Loading and transport are at the buyer's cost and responsibility.

Condition: good (used), – Power output: 15 kVA – Pneumatic Csdpfozwkttox Ap Dohd – 380V

Condition: refurbished (used), Power at 50%: 100kVA Short circuit-current: 41,5kA Electrode force: 100-600daN / single stroke Throat depth: 350-650mm --- Weld control: MPS 10beta (5-times, 8-program) --- Extra Equipment: Chjdpfxozwhi So Ap Djd - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: excellent (used), hand-operated, water-cooled spot welding tongs with dual-stroke mechanism and short-stroke stop Short stroke: 25 mm - Long stroke: 57 mm Manufacturer: DALEX, Type: A 3119 Rated power at 50% duty cycle: 8.0 kVA Secondary short-circuit current: 9.5 kA Electrode force: 180 daN Arm spacing: 120 mm Arm outreach: 250 mm Csdpfx Ajzua Hksp Dshd also included: DALEX control unit RS 11-2 with connection plug 16 A CEE extensive range of electrode arms (all water-cooled) in stock

Condition: excellent (used), Foot-operated, water-cooled rocker-arm spot welding machine Manufacturer: DALEX, Model: SF 8-2 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8.8 kA 4-stage switch Electrode force: 235 daN Arm extension: 80-300 mm Chjdpfx Apoztyn So Dsd With synchronous welding control RS 11-2 With main switch

Condition: excellent (used), pneumatically operated, water-cooled spot welding tongs Manufacturer: DALEX, Type: 3238 with double-acting cylinder and manual control valve Long stroke: 75 mm – Pre-stroke: 25 mm – Working stroke with stroke adjustment: 0-25 mm Chsdpfx Aoztmb Ejp Dsd Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Arm spacing: 130 mm Arm extension: 350 mm with universal joint suspension and suspension bracket 10 m connection cable included: Synchronous welding control RS 12 with main switch and 32 A CEE plug.

Condition: excellent (used), Parallel-operated, water-cooled spot welding machine Manufacturer: DALEX, Model: PL 63-1 Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31.5 kA Secondary open-circuit voltage: 7.04 V Electrode force: 390 daN Reach: 250-550 mm Arm distance: 150 or 310 mm with mounting control cabinet according to VDE 0113 Main switch Synchronous welding control 15036 Chedpfxszrupzs Ap Dod

Condition: defective spare-parts repository (used), functionality: not functional, NIMAK BMP 20/200 spot welding machine for sale Arm length: 300 mm Power: 200 kVA Codpfxozp H Uke Ap Djhd The machine is out of service, and its condition is unknown.

Condition: new, Year of construction: 2026, The KL2000 machine combines welding, cleaning, and cutting into a single compact unit. It offers an energy-efficient, low-maintenance, ensuring high precision and fast operating speeds across various metal types. Technical Specifications: Laser Source: 2kW Laser Type: Fiber Laser (Raycus) Laser Wavelength: 1080 nm Adjustment of power: 10 - 100% Output Power Stability: < 3% Central focus distance: 150mm Adjustable axial run-out (weld seam): 0.1 - 5 mm Chedpfx Ajzmtmhjp Dsd Laser Cooling System: Integrated water cooling chiller Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 - 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 8 m Machine Dimensions (L x W x H): 1,000 x 550 x 650 mm Weight: 210 kg CE Certification: Included

Condition: like new (used), Power at 50%: 35kVA Short circuit-current: 15,5kA Electrode force: 470daN / double stroke Throat depth: 400mm --- Weld control: TE 101 (8-times, 100-program) Chedpfx Apszl A S Re Ded --- Extra Equipment: - foot pedal - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock