Achte display system GmbH

Condition: used, Manufacturer: AMADA, Tape speed. 0-31 m / min Hsdpfx Aeyyhvgecvok

Year of construction: 2005, condition: reconditioned (used), Used parts cleaning machine / spray cleaning system type L90 The system was serviced by Glogar. Heating element, pump seal, gas pressure dampers, timer and cover (oil skimmer) have been replaced. Fully automatic hot water parts washing machine with basket drive via geared motor, stainless steel washing pump (Lowara make), circulating three-sided spray system with stainless steel nozzles - Basket diameter: 790 mm - Usable height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (LxWxH): 1,150 x 1,250 x 1,900h mm No warranty as this is a used machine. Hjdjyx S Uwjpfx Acvsk

Condition: good (used), Year of construction: 1990, Internal item no.: 25122 Vibratory finishing system incl. media Walther Trowal Type: A-150 Year: 1990 Power: 1.4 kW 9-30 rpm Incl. controlled lifting and lowering function Well-maintained condition + very good drum lining! Drum diameter: 700 mm Opening: D260 mm Dimensions (LxWxH): 60 x 76 x 84 cm Hsdpfsyx Dr Ujx Acvsk Weight: approx. 200 kg

Year of construction: 1991, condition: good (used), functionality: fully functional, 1 x Chip Vibrating Sieve Henri Petit Jean B 222 Year of manufacture: 1991 with feed hopper blower pneumatic sieve tensioning. with 4 different steel sieves Hedpfx Asyx Di Tjcvsk The machine can be inspected under power.

Year of construction: 1972, condition: ready for operation (used), A rotary drum drying system with a few peripheral devices is available. Wall thickness inner/outer: 8mm/8mm. Including feeder with hopper discharge belt, bucket elevator, cyclone, filter system, suction blower, feed hopper, chimney/exhaust air system. The system was refurbished approx. 20 years ago and has been used little since then. Documentation available. An on site inspection is possible. Hsdpfx Ajyxq Uvocvek

Year of construction: 2021, condition: used, functionality: fully functional, complete 3-stage washing system, entirely made of stainless steel 1st stage: washing with hot water 2nd and 3rd stage: rinsing with cold water Hedpfx Acoyxgppsvek workpiece passage height 2100 mm, depth 800 mm

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Hedpfx Aceyxccrovjk Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 1998, condition: ready for operation (used), Basket dimensions: 1100x1100mm, usable height: 800mm, max. load weight: 700kg, spray pressure: 4.3bar, ambient temperature: 5-40°C, max. washing temperature: 90°C, material of media-contact parts: stainless steel V2A, power connection: 55A. With control cabinet and documentation. An on-site inspection is possible. Hsdeywlnzepfx Acvok

Year of construction: 2022, condition: like new (used), JustLaser JustMark 4.2 Fiber Laser (Year of Manufacture 2022) – Like New – Industrial Quality For sale is a high-quality JustLaser JustMark 4.2 fiber laser from 2022 in top condition (like new). The machine has seen little use and operates flawlessly. Ideal for professional applications in metal engraving, series production, or customization. 🔧 Technical Details: Model: JustMark 4.2 Year of manufacture: 2022 Laser type: Fiber laser Condition: Very good / like new Hedpfxsyu Szus Acvsk Areas of application: Metal engraving, marking, series production ⚙️ Benefits: Precise and fast engraving, even in series production Low maintenance and long-lasting Professional industrial quality Easy operation and reliable performance Original price: 25,000 EUR net

Year of construction: 2008, condition: good (used), functionality: fully functional, Sandblasting cabin (L16m W5m H5.5m) silo for 2 blasting pots floor with recovery slides and automatic filling system for silo dust extraction with pat-jet cartridge filter type 14/21 Hodpsyu Hiyefx Acvjk Cabin is currently still in use. Dismantling must be arranged by the buyer. Some spare parts are also available.

Year of construction: 2011, condition: ready for operation (used), A CNC laser marking and engraving system for component marking is available. Laser class: 1, laser type: diode-pumped Yb laser, laser power: 20W, axis travel X/Y/Z: 390mm/560mm/275mm, max. workpiece dimensions X/Y/Z: 730mm/365mm/445mm, max. workpiece weight: 50kg, control system: AC-Laser. Documentation available. An on-site inspection is possible. Hedpfx Acsyuyvtevsk

Year of construction: 2019, condition: ready for operation (used), An automatic Munder blow-off system for cleaning cylindrical air filter cartridges is available. Compressed air supply: 6bar-8bar, quality: 5, nozzle pressure: 6bar, volumetric flow rate: 190m³/h, vacuum: 20kPa, max. filter height: 1400mm, max. filter diameter: 540mm. Documentation available. An on-site inspection is possible. Hodpfx Aceyuyu Novjk

Condition: good (used), Year of construction: 2018, functionality: fully functional, total height: 750 mm, total length: 900 mm, total width: 700 mm, overall weight: 150 kg, MSW FASER 30 TG BLUE LINE marking laser - Operating voltage: 230 V Hedpeyuvgnjfx Acvjk - Frequency: 50 Hz - Laser power: 30 W - Power consumption: 550 W - Table dimensions: 400 x 240 mm Note: The item must be collected between 05 and 07 May 2026 at a mutually agreed appointment. FCA D-74385 Pleidelsheim – loaded onto truck

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, product length (max.): 1,400 mm, product width (max.): 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Number of blast turbines: 4 Hsdpfxjyua D Ro Acvsk Power per blast turbine: 22 kW Abrasive throughput per turbine: 7 kg/hour Shot flow rate: 450 kg/min Blast velocity: 80 m/s Maximum product dimension: 1,400 x 1,000 mm Cabin diameter: 2,200 mm MACHINE DETAILS Control system: Siemens EQUIPMENT Vibratory screen for abrasive media and discharged material Feed via external rail system CE marking

Condition: used, Year of construction: 2010, Bonding and dispensing system REINHARDT, year of manufacture 2010, SN 5216/1 Hsdpoytqm Tjfx Acvsk

Year of construction: 2019, condition: ready for operation (used), A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible. Hjdpoytgpqefx Acvek

Year of construction: 1996, condition: ready for operation (used), An alkaline based single chamber cleaning system wash system is available. Containers: 3, total tank volume: 12.9m³, working dimensions X/Y/Z: approx. 8000mm/1200mm/1600mm, overall system dimensions X/Y/Z: approx. 19500mm/7200mm/4300mm. Documentation available. An on site inspection is possible. Hjdpfjytgntjx Acvjk

Year of construction: 2023, condition: ready for operation (used), A relatively modern corona pretreatment system for single sided aluminum foil coating is available. Material: aluminum foil, intended use: coating, coating sides: 1, web width: 1350mm, treatment width: 1450mm, treatment speed: 3m/min, roll diameter: 125mm, roll length: 1550mm, generator type: Softal 9030, generator power: 3kW. Total system dimensions X/Y/Z: approx. 2000mm/1550mm/1700mm, weight: approx. 1500kg. Including ozone exhaust system RD 4. Documentation available. An on site inspection is possible. Hjdpfx Aceyrta Hovok

Year of construction: 1980, condition: used, Technical Specification Manufacturer: Sledum (Netherlands) Model: RG-270 Crankshaft Grinding Machine Manufacturing period: Industrial design from the 1970s–1980s The Sledum RG-270 is a high-precision, industrial-grade crankshaft grinding machine engineered for precision grinding of main and pin journals on crankshafts and similar rotating components used in internal combustion engines. The machine features a robust cast-iron bed, providing high stability and excellent vibration damping. Its design allows for uniform and highly accurate machining of large crankshafts. Hjdeyrpu Tjpfx Acvok Main technical features: • Distance between centers: 2000 mm • Maximum swing diameter: 270–275 mm • Workpiece types: crankshafts, shafts, eccentric rotating components • Grinding spindle mounted with high-rigidity bearings • Cross and longitudinal slides with fine feed adjustment • Machine bed equipped with precision guideways • Adjustable steady rest system for stable support of long workpieces • High-performance grinding motor intended for industrial continuous operation • Manually operated feed and positioning system • Stable, vibration-dampened industrial machine frame • Coolant system preparation • Heavy-duty industrial construction designed for long service life

Year of construction: 2015, condition: ready for operation (used), Two plasma machines Plasma Technology for surface cleaning and pretreatment are available. Vacuum chamber internal dimensions X/Y/Z: 190mm/190mm/320mm, vacuum chamber volume: 11.5l, plasma generator power: 400W, working pressure range: 0.05mbar-0.6mbar, max. process gas prepressure: 2bar, machine dimensions X/Y/Z: approx. 500mm/300mm/600mm. Documentation available. An on site inspection is possible. Hsdpfoyrg Hmsx Acvek

Year of construction: 1997, condition: good (used), functionality: fully functional, machine/vehicle number: 9377I, The machine is in dismantled condition. It comes with many spare parts. Includes one new rubber conveyor belt as a spare. Hodpfoynwkzsx Acvok

Year of construction: 1974, condition: ready for operation (used), A vibratory finishing trough Trowal for the aging of parquet strips is available. Maximum product length: 2400mm. An on-site inspection is possible. Hedpoynlt Defx Acvek

Condition: like new (used), The system is a complete surf finisher system including suction station + undersize screening station + complete water treatment + water tank from Rösler. If required, including robot + handling portal. The components are transferred by robot to a portal with holders and immersed in the rotating surf container. The deburring performance is 20 seconds. Immersion time corresponds to about the same performance as 10-15 minutes. in a conventional vibratory finishing machine. Rotating work tank RMSF 4/800 1 piece round plastic container - Working tank diameter: 850 mm Working tank depth: 500 mm 1 pc. quick coupling for easy changing of the working container 1 pc. drive motor, power 7.5 kW 1 pc. dosing device D1-K/320 SF (circulating water) on stand 1 pc. stand for enemas in the working container 1 piece flow monitoring (by means of flow monitor) Undersize screening: 1 pc. Grinding wheel return system 1 piece underframe as a stable welded construction 1 pc. balancer for weight compensation (sanding pad + hose + nozzle) including mounting frame - Suspension for hose on the base 1 pc. vacuum generator for generating a negative pressure - Connection of the line system to the transfer device of the vibratory finishing system - Suction hose with nozzle, length approx. 5 m 1 piece collection container 500 liters as a cyclone separator - for receiving the process media that are sucked out of the working container, - for delivering the process media to the screening machine - incl. automatically operated gate valve and hose for returning the process media to the screening machine 1 pc. spray nozzles for rinsing out the collection container 1 pc. 2-hand control for flap 1 pc. dosing device DZ1-K Rösler screening machine R 12/6 SM-E - for undersize screening - Total length: 1,400 mm - Overall width: 1,160 mm - Screen area: 1,200 x 600 mm - Delivery height: 1,065 mm - Step in the separation zone: 1 x 40 mm - Drive power of vibration motors 2 x 0.525 kW - Vibration motors arranged laterally - Engine speed: 1500 rpm - Operating voltage: 400 V, 50 Hz, 3 Ph N/PE Hedpfxoyngitj Acvsk Rösler centrifuge Z 1000 ASS-II-Turbo with automatic sludge discharge consisting of: Centrifuge Z 1000 * Aluminum alloy centrifuge rotor * Speed: 2,050 rpm * Reduced stripping speed via frequency converter * automatically retractable paring knife * Amount of sludge per peeling cycle: up to 25 kg * automatic residual water drainage * Long bearing service life due to special bearings that can be relubricated * electronic vibration monitoring * automatic rotor flushing Accesories 1 piece mud truck RSKM 30 1 pc. Combined waste water and circulation tank 700/700 liters 1 pc. flocculant dosing pump DP2 1 pc. Automatic post-dosing DZ-4/320 2 suction lances (vacancy monitoring) 1 pc. sound insulation package approx. 80 dB(A) 1 piece cooling unit RK 3 1 piece titration measuring kit for manual compound measurement

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: MDY2310/110, DY2310/014, The compact FOBA M1000 laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small production runs. In addition to the automotive industry and the metal, tool, and mechanical engineering sectors, this small and mobile universal marking machine is particularly suitable for medical technology, plastics processing industries, and contract laser marking (e.g., promotional items). The M1000 enables both small metallic and plastic components and series to be marked efficiently and with high-quality results. Operating in laser class 1, the marking station features a programmable Z-axis, a small work table, and a smooth manual or optionally electrically operated lift door that provides access to the interior from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g., promotional items). Hodjym Rdljpfx Acvek The M-Series comprises advanced manual workstations for precise and economical laser marking of small to large and geometrically complex workpieces, as well as batches and small production runs. Two housing sizes (M2000 and M3000) and three models each (B: with work table; R: with rotary table; P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for marking alignment, mark inspection, and code reading. The highly productive R models: motorized Z-axis, 2-station rotary table; ideal for marking a variety of serial parts (e.g., automotive interior components, metal parts, tools, medical products such as implants or instruments). Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: MY2001/012, Y2001/019, The compact FOBA M1000 laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small production runs. In addition to the automotive industry and the metal, tool, and mechanical engineering sectors, this small and mobile universal marking machine is particularly suitable for medical technology, plastics processing industries, and contract laser marking (e.g., promotional items). The M1000 enables both small metallic and plastic components and series to be marked efficiently and with high-quality results. Operating in laser class 1, the marking station features a programmable Z-axis, a small work table, and a smooth manual or optionally electrically operated lift door that provides access to the interior from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g., promotional items). The M-Series comprises advanced manual workstations for precise and economical laser marking of small to large and geometrically complex workpieces, as well as batches and small production runs. Two housing sizes (M2000 and M3000) and three models each (B: with work table; R: with rotary table; P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for marking alignment, mark inspection, and code reading. Hsdjym N Nmspfx Acvsk The highly productive R models: motorized Z-axis, 2-station rotary table; ideal for marking a variety of serial parts (e.g., automotive interior components, metal parts, tools, medical products such as implants or instruments). Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.