Hennig Systems GmbH

Condition: good (used), Year of construction: 2003, Opportunity to buy a 3 axis vertical machining center in good condition. Mainly used process plastic, so it has not suffered heavy machining and only 7434 spindle hours. Optional: ca 30 BT-40 holders, including drill chuck holders, Weldon holders and collet chucks. This machine is immediately available for delivery. Fslhjzzz Ebscdwwegg Travel distance X-axis 1500 mm Travel distance Y-axis 300 mm Travel distance Z-axis 350 mm CNC Control HEIDENHAIN TNC 410 Total height 2300 mm Total width 3250 mm Overall weight 3200 kg Spindle speed (max.) 8000 rpm Product length (max.) 2900 mm Number of axes 3 Toolholder BT40 Clamp surface height above machine table 860 mm Max tool diameter 80 mm Max tool length 200 mm Max tool weight 3 kg Internal cooling Air cooling through the spindle Capacity tool magazine 19 positions Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 1,350 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 39 m/min, feed rate Y-axis: 39 m/min, feed rate Z-axis: 39 m/min, workpiece weight (max.): 2,500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 35 W, number of spindles: 1, number of slots in tool magazine: 50, Equipment: chip conveyor, documentation/manual, We offer this Hurco BX50i vertical machining center in very good condition, manufactured in 2020. It was first put into service in 2021. Model: BX50i Work table surface 1500 x 960 mm T-slots 6 x 22 mm Maximum permissible uniformly distributed loads 2500 kg Door opening Felhcdszzlu Tswwogg 1100 mm Distance between the 2 columns 1060 mm Distance from spindle nose to table min/max 180/780 mm Spindle speed: 0 – 18000 rpm Hybrid spindle bearings Bearing lubrication: Grease/air Spindle taper: HSK63 FORM A Peak power (for 1 min) Continuous 47 HP - 35 kW at 2800 rpm 33.5 - 25 kW at 2800 rpm Maximum speed: 18,000 rpm Number of tools: 50 Center spindle coolant: 40 bar KNOLL paper filtration If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, overall weight: 9,700 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis CHIRON MILL FX 1250 was manufactured in 2015. It has a mass of 9700 kg and operates at a voltage of 400 V with a full load current of 63 A. If you are looking to get high-quality machining capabilities, consider the CHIRON MILL FX 1250 vertical machining centre we have for sale. Contact us for further details. Fgelhcezzdw Hjdwweg - Voltage / Phases / Frequency (U): 400 V / 3 Ph / 50 Hz- Full Load Current (I): 63 A- Short-Circuit Current Rating (SCCR): 10 kA- Power (P): 38 kVA- Operating Pressure (p): 6 bar

Condition: excellent (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, controller manufacturer: OSP200, rotational speed (max.): 8,000 rpm, operating hours of spindle: 5,000 h, number of slots in tool magazine: 32, Equipment: chip conveyor, 8,000 rpm OSP200, Fusion360 IGF Fslhcezzbk Rjdwwegg Coolant through spindle 4th axis Kitagawa 250mm Available immediately In very good condition

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,197 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 18i-MB, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 1,300 mm Travel in Y-axis: 710 mm Travel in Z-axis: 710 mm Fgelhcezzbbcjdwweg B-axis rotation: 360° Number of axes: 4 Table length: 1,500 mm Table width: 660 mm Tool interface: ISO 40 Max. spindle speed: 10,000 rpm Power: 38.4 kW Tool magazine capacity: 32 MACHINE DETAILS Control system: Fanuc 18i-MB Dimensions & Weight Dimensions (L x W x H): 4,300 x 3,250 x 3,080 mm Shipping weight: 7,000 kg Shipping packages: 4 Operating hours: 10,197 h EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HAAS VM-6 HE Mold Maker was manufactured in 2008. It features an impressive X-axis travel of approximately 1,626 mm, Y-axis travel of approximately 813 mm, and Z-axis travel of approximately 762 mm. The machine includes a 24-position tool changer and has high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 HE vertical machining centre we have for sale. Contact us for further details. • Through-Spindle Coolant (TSC): Yes • High Speed Machining: Yes • Electrical supply: 360–480 V, 3-phase, 50–60 Hz • Full load: 40 A • Largest load: 70 A • Spindle history: Complete spindle replaced with a new unit in May 2021; control counters were reset afterward (do not reflect total lifetime hours) • Current counters since spindle replacement: • Power On Time: 5,204 h • Cycle Start Time: 3,525 h • Feed Cutting Time: 427 h • M30 Counter: 121,779 Fgjlhozy Izyocdwweg • Current machine condition: Not operational due to a defective main spindle motor • Spindle motor: Yaskawa Electric, Type UAKB-31BHA12, AC Spindle Motor Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, feed length X-axis: 1,050 mm, feed length Y-axis: 560 mm, feed length Z-axis: 460 mm, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, total height: 2,746 mm, total length: 2,510 mm, total width: 3,100 mm, table width: 560 mm, table length: 1,300 mm, overall weight: 7,500 kg, Equipment: chip conveyor, documentation/manual, OKUMA GENOS 560R-V 4-axis vertical machining center, CNC OSP-P300M-R, Series 0712-100478, including machining tools, vise, collet set, and programming software. The equipment was purchased new in Romania from the manufacturer's representative. It has been used very little in the last 2 years, probably 25-50 hours. Fsljzy Etmohcdwwsgg

Condition: used, Year of construction: 2015, operating hours: 38,504 h, functionality: fully functional, torque: 200 Nm, controller manufacturer: Siemens, controller model: 840D solutionline Operate, rotational speed (max.): 10,000 rpm, overall weight: 9,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 12,935 h, number of spindles: 1, number of slots in tool magazine: 60, DMG MORI DMC 1450 V Vertical Machining Center | Year of Construction 2015 | SK40 & 60-position Magazine For sale is a robust and precise vertical machining center from the manufacturer DMG MORI, model DMC 1450 V. This machine, built in 2015, is extensively equipped, including with internal cooling, a direct path measuring system, and a 10,000 rpm spindle with 200 Nm of torque. In 2021, the spindle was professionally replaced after an incident. General Machine Data * Manufacturer: DMG MORI * Model: DMC 1450 V * Year of Construction: 2015 * Machine Number: 14595607194 * Operating Hours: 38,504 h * Spindle Hours: 12,935 h * Machine Weight: 9,900 kg Control System * Type: Siemens 840D solutionline Operate 3D control system Spindle * Speed: 10,000 rpm * Torque: 200 Nm * Tool Clamping: SK40 * Note: Spindle replaced after incident in August 2021 (according to service history) Fslhozypzzecdwwsgg Tool Changer * Magazine Positions: 60 positions * Tool Clamping: SK40 Coolant & Disposal * Internal coolant supply (IKZ): Basic package 3 * Blow-through air through the spindle center * Coolant/air switching * Flushing gun for chip flushing * Oil and emulsion mist separator (mechanical) Additional Equipment & Measuring Technology * Path measuring system: Direct path measuring system X, Y, Z * Measuring probe: Infrared TS649 DMG * Enclosure: Operating mode 4 * Software: DMG Netservice - client Excerpt from the Service History * 10/2022: Complete replacement of the X-axis bellows * 03/2022: Replacement of the Y-axis roof * 12/2021: Replacement of the left-hand blind * 10/2021: Timing belt renewed * 08/2021: Spindle replacement after incident * 2020/2021: Work/replacement on the OP019 TFT 19" screen From an insolvency proceeding, sold as is. Offer deadline: September 30, 2026, 6:00 PM. Package price possible for multiple machines from this proceeding. Inspection: September 16, 2026, 10:00 AM - 12:00 PM, Fraunhoferstraße 10-12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM - 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH homepage under Auctions.

Condition: good (used), Year of construction: 2015, operating hours: 24,272 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 720 mm, torque: 406 Nm, controller manufacturer: Heidenhain, overall weight: 11,800 kg, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, MAS KOVOSVIT MCV 1270 Power Fgslhezydarjcdwwog Year of manufacture: 2015 Heidenhain iTNC 530 control system X-axis: 1270 mm, Y-axis: 610 mm, Z-axis: 720 mm Tool changer with 24 positions, SK50 Spindle speed up to 8000 rpm Spindle torque 406 Nm / 100% 623 Nm / 40% Chip conveyor IKZ 20 BAR (internal cooling system) Weight: 11800 kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: H-64094, travel distance X-axis: 1,630 mm, travel distance Y-axis: 860 mm, travel distance Z-axis: 760 mm, controller model: Ultimax, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,630 mm Travel range, Y-axis: 860 mm Travel range, Z-axis: 760 mm Spindle speed: 10,000 rpm Working area: 1,676 x 889 mm Load capacity: 2,722 kg Max. tool diameter: 75 mm Fjlhszx N Thjcdwwegg Max. tool diameter with free adjacent tool positions: 127 mm Max. tool length: max. 300 mm MACHINE DETAILS Control system: Ultimax Tool positions: 40 EQUIPMENT Spindle cooling Chip conveyor

Condition: used, Year of construction: 2016, Used 2016 SPINNER U-1520 Machining Centre Supplied with Siemens SINUMERIK 840 control, 12,000 RPM spindle, 32-station tool changer, 80 bar high-pressure coolant, air through spindle, Renishaw probe, touch probe, and additional Ø650 mm rotary table. ----- SPECIFICATION: TRAVELS: Fgolhcezx Ehnedwweg - X Axis: 1,500 mm - Y Axis: 500 mm - Z Axis: 600 mm - 4 Continuous Axes + 1 Positioned Axis TABLE: - Rotary Table Diameter: 650 mm - Fixed table: 920x540mm SPINDLE: - Max Speed: 12,000 rpm - Taper: SK40 - Air Through Spindle TOOL CHANGER: - Capacity: 32 Tools COOLANT EQUIPMENT: - High Pressure Coolant: 80 bar GENERAL: - Control: Siemens SINUMERIK - Renishaw Probe - Touch Probe - Year of Construction: 2016 Control: Siemens 840D Spec: Travel X 1500 Y500 Z600 | Spindle Speed 12000RPM | SK40 Accessories: 5 axis Table, Fixed Table, 32 Tool Changer

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, torque: 600 Nm, controller manufacturer: fanuc, controller model: 18, workpiece length (max.): 1,400 mm, workpiece width (max.): 700 mm, workpiece height (max.): 600 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 1,500 kg, total height: 3,500 mm, total length: 5,000 mm, total width: 6,000 mm, table width: 700 mm, table height: 600 mm, table length: 1,400 mm, table load: 1,500 kg, overall weight: 9,000 kg, spindle speed (max.): 6,000 rpm, coolant supply: 25 bar, distance table center to spindle nose: 600 mm, spindle motor power: 26,000 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Sold with a 380/220 transformer; the machine actually operates at 220. Incoterm EXW Torrelavega (Spain). The machine is sold as is, in its current installed location. Disassembly, handling, loading, transport, insurance, and any necessary permits will be the responsibility and risk of the buyer. Fslhcdszxzvhowwegg

Condition: good (used), Year of construction: 2011, functionality: fully functional, Description: Fslhcdozxtcmowwsgg The machine is in good technical condition, and testing is possible upon prior arrangement. Maximum spindle speed: 6000 rpm. Table size: 700x420 mm. Travels in X/Y/Z axes: 1600/800/782 mm.

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 661 mm, travel distance Z-axis: 610 mm, Equipment: chip conveyor, - Year of manufacture: 2007 - Single-shift operation / individual part production - Good condition and accuracy, inspection possible while the machine is running - 14,151 machining/spindle hours Folezxpa Ujhcdwwjgg - SK40 12,000 spindle - 24-tool magazine - Travel range X1270/Y661/Z610 - Renishaw NC4 tool measuring probe - Renishaw measuring probe - Minimum quantity lubrication - Extensive software package - Without clamping devices

Condition: used, Year of construction: 2012, travel -x axis 1.630 mm travel -y axis 762 mm travel -z axis 650 mm control FANUC - 0I-MD Spindle speed 12.000 min -1 Felhcdozw N E Iewwogg weight of the machine ca. 13 t Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. The machine only has 13.686 spindle hours. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,530 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, table width: 650 mm, table length: 1,630 mm, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis YCM NSV 156 A was manufactured in 2013. It features a travel distance of 1530 mm in the X-axis, 650 mm in the Y-axis, and 610 mm in the Z-axis. The machine includes a robust table size of 1630 x 650 mm and a maximum table load of 1500 kg. If you are looking to get high-quality machining capabilities, consider the YCM NSV 156 A vertical machining centre we have for sale. Contact us for further details. • Travel X: 1530 mm Foljzwxw Tjhcdwwogg • Travel Y: 650 mm • Travel Z: 610 mm • Table Length: 1630 mm • Table Width: 650 mm • Table Load: 1500 kg • Spindle Speed: 12,000 rpm • Spindle Taper: BBT40 • Tool Positions: 30 • Maximum Tool Diameter: 76 mm

Condition: excellent (used), Year of construction: 2001, Haas VF 6/40 TRHE 5-axis machining center Year of manufacture: 2001 X-axis: 1,626 mm Y-axis: 813 mm Z-axis: 762 mm A-axis (table tilting): ±120° B-axis (rotation): 360° Rapid traverse: 15,240 mm/min Feed rate during cutting: 12,700 mm/min Distance from spindle nose to table (min.–max.): 102–864 mm Distance from spindle nose to clamping plate (min.–max.): 279–483 mm Tool changer: 24-position Rotary table: Diameter of clamping plate: 310 mm Max. weight on the clamping plate: 227 kg Chip conveyor Handwheel Internal coolant system High-speed machining Quick code Extended memory 16MB Macro Fgelhcdszwultewwsg Rigid tapping

Condition: used, Year of construction: 1997, x-travel 1660 mm y-travel 510 mm z-travel 510 mm Fgslhszwqcnscdwwsg Control M+ Mazatrol Table dimensions 2000x510 mm table load max. 1.000 kg number of spindle speeds 7.000 UpM tool taper SK 40 tool piece magazine with 48 Stück weight of the machine ca. 7.500 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: Fanuc, controller model: Fanuc, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (min.): 12,000 rpm, number of spindles: 1, Manufacturer: Doosan Model: DNM 6700 Year: 2018 Condition: (Used) Excellent Control: Fanuc Control Accessories: Kitagawa 4th Axis, Renishaw Spindle Probe, Tool Probe, Swarf Conveyor, Mist Extraction Unit & Manuals. LOCATION: COVENTRY, UNITED KINGDOM MACHINE SPECIFICATIONS Control: Fanuc Control X Axis Travel: 1300mm Fgjljzwhtkohcdwwjg Y Axis Travel: 670mm Z Axis Travel: 625mm Max Workpiece Weight: 1300kg Spindle Speed: 12,000rpm Table Size: 1500 x 670mm Tool Change Capacity: 30 ATC Tool Size: BT40

Condition: excellent (used), Year of construction: 2006, Winmax control Felhcdezwhlaewwegg Travel X/Y/Z: 1270 x 660 x 610 mm Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar Pocket milling with islands Synchronous thread cutting

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, overall weight: 6,260 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2023. It features an impressive X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1,321 x 495 mm and a maximum table load of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining centre we have for sale. Contact us for further details. • Condition: Like new, used • Functionality: Fully operational • Operating hours: 3,363 h • Spindle/machining hours: 2,402 hTravels • Spindle nose to table: 107–742 mmSpindle Fgeljzwffkjhcdwwsg • Maximum spindle torque: 122 Nm at 2,000 rpm • Spindle drive: Inline direct drive • Spindle taper: CAT40 • Number of spindles: 1Table • Table dimensions: 1,321 × 495 mm • Number of T-slots: 5 • T-slot width: 15.9–16 mmTool changer • Tool capacity: 30+1 positions • Tool-to-tool time: approx. 1.8 s • Chip-to-chip time: approx. 2.4 sMachine dimensions and weight • Note: Dimensions in the original ad were incorrectly stated in millimetres instead of centimetres. • Export shipping dimensions without conveyor: 3,330 × 2,330 × 2,570 mm • Export shipping dimensions with chip conveyor: approx. 4,140 × 2,330 × 2,570 mm • Advertised machine weight: approx. 6,200 kg • Official weight with conveyor: approx. 6,260 kgInstalled options • Through-Spindle Coolant (TSC), 300 psi / 21 bar • Renishaw Wireless Intuitive Probing System (WIPS) • High-Speed Machining (HSM) • Programmable coolant nozzleElectrical • 400 V, three-phase power supply Additional equipment • Chip auger • Haas Chip Lift (chip conveyor) • Coolant mist condenser • Probe riser block • Approximately 15 tool holders • Documentation and manuals

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: FAGOR, table width: 660 mm, table length: 1,500 mm, table load: 1,200 kg, This Micromill VMC 1300 Vertical Machining center was manufactured in the year 2007. It is equipped with a Fagor control unit. Machine Benefits Technical Machine Benefits • Tool storage // tool megazine // tool pocket Folszvv Elohcdwwegg • Atc • The machine has internal cooling through the spindle 20 bar. Extra Information MACHINE STILL UNDER POWER

Condition: ready for operation (used), Year of construction: 2014, operating hours: 25,915 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 650 mm, This 3-axis MICROCUT V-30 Challenger was manufactured in 2014. It features a Heidenhain 530 control system and a high spindle speed of 18,000 rpm. The machine offers extensive axis travels with X-Axis at 1,200 mm, Y-Axis at 730 mm, and Z-Axis at 650 mm. With 25,915 machining hours, consider the opportunity to buy this MICROCUT V-30 Challenger machining center. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Fgelhozvvm Necdwwsg • Machining hours: 25915 h /power-on hours: 33381 h • Spindle speed: 18000 rpm

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 1,260 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: FANUC, controller model: 18M, total height: 3,214 mm, total width: 2,980 mm, table load: 1,200 kg, overall weight: 12,000 kg, spindle speed (max.): 4,000 rpm, spindle motor power: 18,500 W, product length (max.): 3,480 mm, number of axes: 3, This 3-axis DAEWOO ACE V 600 was manufactured in 1997. It features an impressive X-axis travel of 1,260 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine includes a robust table size of 1,400 x 700 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the DAEWOO ACE V 600 vertical machining centre we have for sale. Contact us for further details. Fgjlhcdjzvvcwjwweg • Spindle taper: BT50 / ISO 50 • Tool magazine capacity: 40 tools (header mentions 30 tools) • Spindle nose to table distance: 200–770 mm • Maximum workpiece height: 610 mm • Table size: 1,400 × 700 mm • Rapid traverse rate: 20 m/min • Distance from spindle center to column: 680 mm

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,450 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: Series 0-M, table load: 1,200 kg, overall weight: 13,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 15,000 W, tool weight: 15,000 g, number of axes: 3, This 3-axis Parpas P15 A was manufactured in 2009. It features a generous X-axis travel of 1,450 mm, Y-axis travel of 650 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1650 x 700 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the Parpas P15 A vertical machining centre we have for sale. Contact us for further details. • Table: • Dimensions: 1650 x 700 mm • T-slots (width x number x pitch): 22 x 5 x 150 mm • Travels: • Distance spindle nose to table: 200–810 mm • Distance spindle center to column: 720 mm • Automatic tool changer: • Capacity: 24 positions • Max tool diameter: 110 mm • Max tool length: 300 mm • Tool holder type: CAT-50 / BT-50 • General: • Overall dimensions: 3,500 x 3,100 mm Folhcdwezvvcqswsgg Technical Specification Taper Size ISO 50