Hacoplast B.V.

Condition: used, Year of construction: 2005, 1 hydraulic injection molding machine, ARBURG ALLROUNDER SELECTA 270S Self-dismantling capability Color: as shown in the pictures, matching the images and inspection Ppodpszqcl Ijfx Agdow Year of manufacture: 2005 Machine number: 198190 Dimensions L/W/H: 350x110x200cm Condition: used

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,626 h, clamping force: 100 kN, screw diameter: 25 mm, Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15/25 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details. • Selection unit: yes • Single platen: yes • Beam spacing: 470 x 470 mm • Operating hours: 22,626 h • Electricals: • Operating voltage: 400 V, 3~, 50 Hz • Control voltages: 230 V, 50 Hz; 24 V~ • Motor/heating rated current: 80 / 58 A Ppsdpfx Agozm S Auodjw • Total rated current: 138 A • Total connected load: 75 kW • Condition note: small servo motor problem Additional equipment • Geiger handling (optional)

Condition: good (used), Year of construction: 2009, Arburg parts Year of manufacture approx. 2009 Ppedpszl Tcyjfx Agdew

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 178759, clamping force: 2,000 kN, screw diameter: 35 mm, installation height: 350 mm, total length: 5,000 mm, total width: 2,200 mm, total height: 3,800 mm, overall weight: 13,000 kg, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, controller manufacturer: ARBURG, table diameter: 1,500 mm, ARBURG ALLROUNDER 1500 T 2000-350 Injection Molding Machine - Clamping force: max. 85 kN - Opening force: max. 120 kN - Opening stroke: max. 300 mm - Distance between mold plates: max. 650 mm - Screw travel: max. 145 mm Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. Ppodpfx Agozlfmkedow FCA D-63128 Dietzenbach – loaded onto a truck.

Condition: good (used), Year of construction: 2010, 420 C 1000 - 290 Thermoplastic cylinder, complete, 40 mm, highly wear-resistant Selogica direct control system Hydraulic system with 2 control pumps Anniversary model GOLDEN EDITION Thermoplastic processing Open nozzle, 40 mm Nozzle tip for open nozzle Heating band for open nozzle Clamping plate set 420, central, Ø 125 mm Connection for blow-out device 1 Selection unit, lateral installation, including connection Core pull, 1 for serial movement, holding pressure via check valve Interface for robot system (according to EUROMAP 67), 50-pin Socket distribution: 1 CEE, 1 Schuko, additional Interface for printer, serial USB CompactFlash interface for data set storage User authorization with chip card according to EUROMAP 65 Fault indicator, acoustic 3 electrical heating circuits for tool heating Interface for coloring device 4 freely adjustable cooling circuits Machine-specific cooling circuits, freely adjustable Equipment package: Extended monitoring Equipment package: Extended movement sequences Equipment package: Production control Equipment package: Optimization / operating aids Pjdpezi A N Defx Agdopw Equipment package: Quality assurance Equipment package: Documentation CD with operating manual and parts list Without granulate hopper 50 L

Condition: good (used), Year of construction: 2014, 420 C 1000 - 290 Thermoplastic cylinder, complete, 35 mm, highly wear-resistant Standard screw coupling, coupling geometry, dual-edge Control system: Selogica direct Hydraulic system with 2 control pumps Anniversary model: GOLDEN EDITION For processing thermoplastics Open nozzle, 35 mm Nozzle tip for open nozzle Heating band for open nozzle Clamping plate set 420, central, Ø 125 mm Connection for blowing device 1 Selector unit, lateral installation, including connection Core pull 1 for serial movement, holding pressure via check valve Interface for robot system (according to EUROMAP 67), 50-pin Socket outlet: 1 CEE, 1 Schuko, in addition Interface for printer, serial USB CompactFlash interface for data set storage Operator authorization with chip card according to EUROMAP 65 Fault indicator, acoustic 3 electrical heating circuits for tool heating Interface for coloring device 4 freely adjustable cooling circuits Machine-specific cooling circuits, freely adjustable Equipment package: Enhanced monitoring Equipment package: Enhanced traversing movements Equipment package: Production control Equipment package: Optimization / operator assistance Equipment package: Quality assurance Equipment package: Documentation CD with operating manual and spare parts list Elastic machine mounting on vibration dampers Connection for ejector plate securing Ejector quick-release coupling Pjdpfezi A Ndex Agdepw Control cabinet, water-cooled Socket outlet: 1 CEE, 1 Schuko Hydraulic ejector Protective device, open at the top

Condition: used, Year of construction: 2008, 4 x Arburg injection molding machines Podpfx Agjzclpzsdjpw Arburg injection molding machine 470C 1500-400, year of manufacture 2008 Arburg injection molding machine 270M, year of manufacture 1995 Arburg injection molding machine 270S 500-150, year of manufacture 2004 Arburg injection molding machine 320M 750-210, year of manufacture 1998

Condition: defective spare-parts repository (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 50.11.547, clamping force: 1,472 kN, screw diameter: 45 mm, clearance between the columns: 460 mm, ejector force: 4,000 N, opening stroke: 460 mm, total length: 6,000 mm, total width: 1,300 mm, total height: 2,000 mm, overall weight: 6,600 kg, number of injections: 1, power: 64 kW (87.02 HP), input voltage: 400 V, For sale is a hydraulic injection molding machine, NPM Multipower 150, manufactured in 2011. The machine is being replaced by a larger unit due to a capacity expansion. During the dismantling process, the control panel (HMI) was removed and sent in for repair. Since the machine is no longer needed, we would prefer not to invest in the cost of a repair. For this reason, the machine cannot currently be put into operation or its functionality tested. The operating hours also cannot be read at this time. The machine was mainly used in our facility for the production of plastic caps as well as sample and prototype parts. Accordingly, it was rarely operated in multi-shift mode or under high load. The removed control panel will be provided with the machine. We are not aware of the current repair status. Upon request, we will gladly provide contact information for the responsible service partner so that a potential buyer can inquire directly about repair options. The machine is explicitly sold as an untested used machine without any functional guarantee. It is particularly suitable for specialized companies with their own maintenance department, for retrofit projects, or for obtaining spare parts. Inspections are possible and expressly encouraged, by prior arrangement. Ppodpfx Agjza D Idsdjw

Condition: like new (used), Year of construction: 2012, operating hours: 46,000 h, functionality: fully functional, clamping force: 1,500 kN, Arburg Golden Edition 470-1500-400 from 2012 In perfect technical condition Injection unit: Screw diameter: 40 mm Injection weight: 180 g Ppsdjy Iupiepfx Agdsw Injection pressure: 2000 bar Tie bar distance: 470x470 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: The machine is in excellent technical condition Operating hours: 46,500 h in automatic mode Robot interface Color dosing unit interface Hydraulic core pull x 1 Reinforced injection units – bimetal Air x1

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Pjdpsy Hki Ajfx Agdopw Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: excellent (used), Year of construction: 2013, operating hours: 19,500 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 45 mm, Very low hours Arburg 570 E 2000-800 moulding machine fitted with Wittmann Primus 16T robot Arburg 570 E 2000-800 moulding machine specs; Hours = 19,800 Year = purchased new in December 2013 Tonnage = 200 Screw diameter = 45mm Shot weight (g PS) = 291 Wittmann Primus 16T robot specs; Hours = very low Year = purchased new in June 2021 Travel = Z=2000mm, Y=1000mm, X=590mm comes with integrated conveyor and cell panels Ppjdpfx Agsyxhaiodow

Condition: ready for operation (used), Year of construction: 2024, operating hours: 8 h, clamping force: 100 kN, screw diameter: 18 mm, total width: 526 mm, total height: 1,692 mm, overall weight: 450 kg, product length (max.): 1,485 mm, Hydraulic injection moulding machine manufactured in 2024. This BOY XS 161 features a clamping force of 100 kN and a maximum injection pressure of 2298 bar. It includes a 18 mm screw diameter and a theoretical shot volume of 6.1 cm³. If you are looking to get high-quality injection moulding capabilities, consider the BOY XS 161 machine we have for sale. Contact us for further details. • Control system: Procan ALPHA 4, 15" multi-touch HMI • Injection pressure: max. 2298 bar • Theoretical shot volume: 6.1 cm3 • Distance between tie bars: 160 mm (205 mm diagonal) • Max. daylight between platen: 250 mm • Adjustable opening stroke: 150 mm • Min. mold height: 100 mm (optional 50 mm) • Hydraulic system pressure: 300 bar • Oil tank capacity: 28 liters • Installed total power: 6.1 kW • Electrical supply: 400 V 3~ N, 50/60 Hz, 12.4 A • min. machine height: 1380mm • max. machine height: 1692 mm Ppodpfxjyw I Aze Agdjw • Footprint: 0.78 m2 • Safety guarding: Fully enclosed clamping zone with clear polycarbonate sliding safety gate and electrical interlock • Peripheral interfaces: Pneumatic and cooling water connectors on the non-operator side • Status indicators: 3-tier LED signal tower (Red/Yellow/Green) Additional equipment (accessories) • 3-liter gravity material hopper • Red 16A CEE power plug • Heavy-duty wooden transport/leveling base

Condition: excellent (used), Year of construction: 2010, operating hours: 91,720 h, functionality: fully functional, Clamping force 150 kN Screw diameter D45 mm Max. injection volume 318 cm³ Mounting plates 688 x 688 mm Pjdpfxoyvt R Is Agdjpw Total weight 6840 kgs

Condition: excellent (used), Year of construction: 2010, operating hours: 84,854 h, functionality: fully functional, Clamping force 320 kN Ppodpfx Aoyvt Itogdew Screw diameter D60 mm Max. injection volume 664 cm³ Mounting plates 1030 x 1030 mm Total weight 17.5 t

Condition: used, Year of construction: 2010, operating hours: 13,978 h, functionality: fully functional, machine/vehicle number: B543, clamping force: 62 kN, screw diameter: 12 mm, clearance between the columns: 77 mm, displacement volume: 6 cm³, injection pressure: 1,830 bar, mold height (min.): 70 mm, ejector force: 5,000 N, ejector stroke: 45 mm, opening stroke: 110 mm, plate width: 77 mm, plate height: 77 mm, installation height: 180 mm, total length: 1,160 mm, total width: 700 mm, total height: 1,950 mm, overall weight: 150 kg, number of injections: 897,476, power: 3 kW (4.08 HP), type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, For sale is a very well-maintained Cronoplast 6/10P injection molding machine from 2010. The machine was operated exclusively by a professional injection molder, regularly serviced, and is in excellent condition. Thanks to its extensive additional equipment, this system offers optimal conditions for efficient, precise, and stable production processes. Ppodpfx Agsytgmvodsw Equipment & Highlights ✔ Selector valve – ensures clean part ejection and optimized part handling ✔ Ceramic heating elements – enable higher processing temperatures and energy-efficient heating ✔ Electric mold heater – ensures precise mold temperature control ✔ Stable machine frame – ideal for operation and maintenance ✔ Blow-out unit – improves part removal and process reliability ✔ Additional sockets – perfect for peripherals and accessories Since you are buying directly from the machine owner, you save on the commission costs for dealers. We have other machines of this type in stock. The equipment is identical; operating hours may vary. Contact us, and we will offer you an attractive package price. Technical Data – Cronoplast 6/10P Screw / Injection Unit Technical Data - Cronoplast 6/10P Plasticizing Unit - Piston diameter 12 mm - Displacement volume 6 cm³ - Specific injection pressure 1830 bar Clamping Unit - Clamping force 62.5 kN - Opening force 4 kN - Opening stroke 30-110 mm - Ejector force 5 kN - Ejector stroke 45 mm Dimensions: - Weight incl. frame approx. 350 kg - L x W x H: 116 cm x 80 cm x 198 cm The sale is made with the exclusion of any warranty and liability for defects.

Condition: excellent (used), Year of construction: 2001, Directly from mold making: ARBURG 220 S 150-30 - Year of manufacture 2001 Ppsdpfx Agsyl Syrsdjw Approx. 46,000 operating hours, screw/cylinder d18 mm (tested), CF card reader, very compact, ideal for small parts, minimum footprint: 2.10 m x 0.80 m, can be inspected while in operation, ex works, free loading. Without peripherals: Dryer, hopper, sprue picker GEIGER MiniServo possibly available at an extra charge.

Condition: excellent (used), Year of construction: 1998, clamping force: 80 kN, screw diameter: 38 mm, The Boy 80T In Very Condition The Machine Done Low Hours One Owner Used In Training Centre Psdpfeyhrqijx Agdjpw

Condition: reconditioned (used), functionality: fully functional, clamping force: 220 kN, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Ppedpfx Aoyfphajgdow Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 22M which is very similar to the BOY 22MA machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: reconditioned (used), operating hours: 27,716 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 24 mm, clearance between the columns: 254 mm, displacement volume: 36 cm³, injection pressure: 1,455 bar, injection weight: 32 g, total length: 1,980 mm, total width: 815 mm, total height: 1,897 mm, overall weight: 1,105 kg, Now fully refurbished by the team at STV Machinery is this Boy 22M-HV machine. It has a horizontal clamp unit and a vertical injection unit which it makes it suited for split-line injection. It is fitted with a 24mm diameter screw. Manufactured in 2006 and has less than 28,000 hours. Ppedex U Ay Nepfx Agdjw Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: refurbished (used), operating hours: 42,000 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 24 mm, clearance between the columns: 254 mm, displacement volume: 36 cm³, injection pressure: 1,455 bar, injection weight: 32 g, total length: 2,430 mm, total width: 810 mm, total height: 1,620 mm, Our team are currently working on the refurbishment of this BOY 22M injection moulding machine. This machine is fitted with a 24mm screw. BOY machines are very popular due to their small footprint. Ppodpex U Axfsfx Agdsw Any machines awaiting or undergoing refurbishment by us can be reserved with a 10% deposit. As this machine is already underway, you can expect this machine to be fully refurbished by our in-house experts within a matter of weeks. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 22M which is very similar to the BOY 22M machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: excellent (used), Year of construction: 1992, Arburg 170 CMD-150-45 Clamping force: 15 tons Year of manufacture: 1992 Tie bar distance: 17x17 cm Screw diameter: approx. 18 mm Ppsdex Nwnkspfx Agdow

Condition: excellent (used), Year of construction: 2002, Arburg 270 S-250 - 60 Clamping force: 25 tons Podpfx Aex I Rdvsgdspw Year of manufacture: 2002 Tie bar spacing: 27 x 27 cm Control system: S Includes conveyor belts

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 878 40013, clamping force: 2,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Podpfx Aextmp Negdspw

Condition: used, Year of construction: 1999, Technical details: Ppsdpjwvkgmsfx Agdow screw size: 45 mm injection shot weight in Polysterol: 149 g/PS closing pressure: 1250 kN

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm injection shot weight in Polysterol: 149 g/PS closing pressure: 100 kN Ppedpfxswvkgge Agdsw