Exsup Machinery Sales

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Hedpfxszma Avo Al Tonp Mould protection Plug combination for electrical connection

Condition: good (used), Year of construction: 2004, functionality: fully functional, 1,0 used injection molding machine with robot Manufacturer: DEMAG Hnedpozl Tvgefx Al Tep Type: ET250-840 Concept Year of manufacture: 2004 Clamping force: 250 tons Tie bar spacing: 630 x 630 mm Screw diameter: 60 mm Max. shot volume: 636 cm³ Shot weight: 579 g/shot Control system: NC4 Equipment: Robot manufacturer: WITTMANN, Type: W633-931 2 core pull units

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 244136, clamping force: 3,200 kN, screw diameter: 55 mm, clearance between the columns: 720 mm, displacement volume: 570 cm³, injection pressure: 2,000 bar, injection weight: 521 g, mold height (min.): 300 mm, total length: 7,460 mm, total width: 1,848 mm, total height: 2,267 mm, overall weight: 20,000 kg, For sale is an injection molding machine from the manufacturer Arburg, type 720 H 3200 - 1300, from 2018. The machine is in very good condition. Clamping force: max. 3,200 kN Mold opening force: max. 110 kN Opening stroke: max. 600 mm Mold height (variable): 300 mm to 800 mm Platen distance (variable): max. 900 mm to 1,400 mm Hodpfxjzl Tc Te Al Tenp Distance between tie bars (H x V): 720 mm × 720 mm Size of the mounting platens (H x V): 1,040 mm × 1,040 mm Max. weight of the moving mold half: 2,900 kg Ejector force | Stroke: max. 86 kN | 250 mm Screw diameter: 55 mm Effective screw length (L/D): 22 Maximum screw stroke: 240 mm Calculated stroke volume: 570 cm³ Maximum shot weight (in polystyrene/PS): 521 g Maximum injection pressure (holding pressure): 2,000 bar Maximum material throughput (PS): 86 kg/h Maximum injection flow rate: 713 cm³/s Specific injection pressure (max.): 2,000 bar Nozzle closing force | Stroke (max.): 90 kN | 550 mm Heating power / Heating zones: 22.9 kW | 8 zones 3. Connection values & machine weights Net weight of the machine (without oil): 18,550 kg Oil capacity (hydraulics): 410 liters Cooling water connection: max. 30 °C | min. 1.5 bar differential pressure (Δp) | Nominal size DN 25 Drive power (pump motor): max. 60 kW Total connection power (electrical at 400V/50Hz): 84 kW Max. current / Fuse rating: Machine total: 125 A Heater: 40 A Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2001, Clamping force: approx. 200 t Components: 1 Mold mounting height: approx. 310 / 760 mm Opening stroke: approx. 320 / 575 mm Tie bar distance: approx. 560 × 560 mm Horizontal screw diameter: approx. 60 mm L/D ratio: 1 / 20 Core pull: 4 Hot runner zones: 12 Flow rate: approx. 206 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 186 A Current 2: 102 A Hsdpfjzl S U Isx Al Tenp Current 3: 84 A Current 4: 67 A Weight: approx. 10.1 t

Condition: ready for operation (used), Year of construction: 1997, operating hours: 113,881 h, functionality: unexamined, machine/vehicle number: 32833, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 11,500 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end. Hnsdpfezl S Rpox Al Top

Condition: used, Year of construction: 2001, Operating hours: 73075023 Hnedpfx Alozl S N Eo Tjp Clamping force: approx. 200 t Number of components: 2 Mold installation height: approx. 310 / 760 mm Opening stroke: approx. 320 / 575 mm Tie bar spacing: approx. 560 × 560 mm Horizontal screw diameter: approx. 60 mm Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 2 Hot runner zones: 20 Flow rate: approx. 190 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 214 A Current 2: 105 A Current 3: 109 A Current 4: 67 A Weight: approx. 10.8 t

Condition: used, Year of construction: 2001, Clamping force: approx. 420 t Components: 2 Mold mounting height: approx. 651 / 1100 mm Hnjdpozl S Nlefx Al Tsp Opening stroke: approx. 400 / 880 mm Tie bar spacing: approx. 900 × 800 mm Horizontal screw diameter: approx. 60 mm Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 4 Special equipment: Needle gate Hot runner zones: 36 Flow rate: approx. 243 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 156.5 A Current 2: 169 A Current 3: 100 A Weight: approx. 17.7 t

Condition: used, Year of construction: 2003, Operating hours: 61303927 Clamping force: approx. 200 t Number of components: 1 Hnedpezl S Hdofx Al Tjp Horizontal screw diameter: approx. 45 mm Core pull: 2 Hot runner zones: 0 Flow rate: approx. 206 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 189 A Current 2: 152 A Current 3: 37 A Weight: approx. 10.1 t

Condition: good (used), Year of construction: 2006, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: KM420-1900C2 Baujahr: 2006 Schließkraft: 420 Tonnen Holmabstand 800 x 800 mm Hnodpfxszl Sfmo Al Tsp Schnecken DN: 70 mm Max. Hubvolumen: 1.047 cm³ Spritzteilgewicht: 853 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Roboter SEPRO, Typ: SR4030 S3 VISUAL, Baujahr: 2006 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: excellent (used), Year of construction: 2008, operating hours: 58,001 h, functionality: fully functional, machine/vehicle number: 170609, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 460 mm, displacement volume: 59 cm³, injection pressure: 2,000 bar, mold height (min.): 150 mm, ejector force: 25,000 N, ejector stroke: 100 mm, plate width: 600 mm, plate height: 650 mm, overall weight: 3,900 kg, Equipment: documentation/manual, ENGEL e-max 100 all-electric injection molding machine including GKU linear robot – Cleanroom system – Pharma – Top condition For sale is an ENGEL e-max 100 (Type E-MAX 200/100) in excellent technical and optical condition. The machine comes from the cleanroom production of a well-known pharmaceutical company in Lower Saxony and was used exclusively under the highest quality standards and regularly maintained. The entire system is in exceptionally well-maintained condition. The scope of supply includes a GKU linear robot including a separate robot base, which means the system can be used immediately for automated production processes. Technical data machine Manufacturer: ENGEL Type: E-MAX 200/100 Clamping force: 1000 kN (100 t) Opening stroke: 350 mm Tie bar spacing: 460 × 410 mm Platen size: 650 × 600 mm Tool height: 150–450 mm Max. tool weight: 650 kg Ejector stroke: 100 mm Ejector force: 25 kN Drying cycle: 1.45 s Injection unit IS 200 Screw diameter: 25 mm L/D ratio: 25 Max. injection pressure: 2,400 bar Max. injection volume: 58.9 cm³ Shot weight (PS): approx. 54 g Injection speed: 108 cm³/s Metering rate: 10 g/s Heating capacity: 6.95 kW Heating zones: 4 Equipment Hedpszl Iymefx Al Tonp ✔ All-electric ENGEL e-max ✔ GKU linear robot ✔ Separate robot base ✔ Cleanroom machine ✔ Used in the pharmaceutical industry ✔ Regularly maintained ✔ Very well-maintained overall condition ✔ Ready for immediate use Advantages The ENGEL e-max impresses with its high precision, energy efficiency, and dynamism. It is ideally suited for the production of high-quality plastic parts, especially in the areas of: Medical technology Pharmaceuticals Packaging Electronics Precision engineering Technical plastic parts Thanks to its origin in a cleanroom production environment, the machine was operated under particularly clean and controlled conditions. Inspection An inspection while the machine is running is possible at any time by appointment. We will gladly send you further pictures, videos, and technical documents upon request. More information on our homepage Maschinen-Handel.eu – Your specialist for used injection molding machines We will support you from the inspection to the transport and commissioning. If desired, we will organize dismantling, loading, Europe-wide transport, and export processing. e-max 100 t Cleanroom | Pharma | All-electric | Top condition

Condition: excellent (used), Year of construction: 2013, clamping force: 3,500 kN, screw diameter: 60 mm, clearance between the columns: 720 mm, displacement volume: 763 cm³, injection pressure: 1,905 bar, injection weight: 695 g, mold height (min.): 350 mm, Basic data Model: 1450 injection unit / 350 t clamping force Year of manufacture: 2013 Control system: NC5 Injection unit Screw diameter: 60 mm Injection volume: 763 cm³ Injection shot weight: 695 g Specific injection pressure: 1905 bar Screw L/D ratio: 20 Clamping unit Clamping force: 350 t Tool plate dimensions: 1040 × 1060 mm Distance between tie bars: 720 × 720 mm Mold height: 350–745 mm Opening stroke: 730 mm Maximum plate distance: 1475 mm Ejector stroke: 200 mm Dimensions and weight Dimensions (L × W × H): 7.64 × 2.01 × 2.27 m Weight: 15,540 kg Hnsdpfx Aszl D Erjl Tjp Tooling and equipment 4 × hydraulic core 12 heating zones for the mold 2-circuit pneumatic cascade control Indunorm quick couplings 2 pneumatic valves on the moving platen Increased pump drive power activeDrive – pump with adjustable speed activeProtect – active mold protection Wear-resistant screw Bimetallic cylinder Injection with p+v regulating pump (closed loop) EUROMAP 67 robot interface

Condition: good (used), Manufacturer: Arburg Year of manufacture: 1998 Machine number: 174514 Type / Model: 420-1000-350 Operating hours: 65,000 h Hsdpfx Aszl Dycol Tjnp Automatic operating hours: 57,000 h Clamping force: 100 t Opening stroke: 500 mm Control system: Selogica Tie bar spacing: 420 x 420 mm Platen dimensions: 570 x 570 mm Minimum tool height: 250 mm Maximum distance between platens: 750 mm Screw diameter: 40 mm Maximum injection volume: 182 cm³ Shot weight: 153 g Holding force: 5 t Connection: 33.4 kW Accessories/Equipment: 2 core pulls, handling connection, pneumatic air valve Condition: good Weight: 3.43 t Dimensions: 3,200 x 1,100 x 1,800 mm

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Hedpfjzl Df Esx Al Tsnp Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Hnedpfjzl Dflex Al Tsp Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2016, KRAUSS MAFFEI KM 160-180 EX incl. LRX 100 (35.000 h) (S&P 3800) Manufacture year: 2016 Operating hours: 35,000 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 160 t Tie bar distance: 630 x 520 mm Mould installation height min.: 300 mm Plate distance max.: 1000 mm Dimensions: 5400 x 1600 x 2100 mm Eeight: 13200 kg Connected load: 28 kW All electric, 2 x Airvalve, 12 x Hoterunner, MC 6 in german, english, polnish and chinese, Interface Robot, Interface Temperatur device, Robot System LRX 100 (10 kg) X = 550mm / Y = 120mm / Z = 1500 mm / C = 90°, price when new approx. 205.000,- Euro Hnodpozl Ddzofx Al Tsp Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Hnodpfxozl Ddne Al Tep Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: ready for operation (used), Year of construction: 2003, clamping force: 2,750 kN, screw diameter: 60 mm, injection weight: 547 g, Hydraulic injection moulding machine manufactured in 2003. This Engel ES 1050/275 HL-V features a clamping force of 275 t and a maximum platen stroke of 1200 mm. It has a screw diameter of 60 mm and a maximum injection volume of 607 ccm. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 1050/275 HL-V machine we have for sale. Contact us for further details regarding this machine. • Screw diameter: 60 mm • Injection pressure: 1725 bar Hnedpfx Alozlrvxo Tjp • Platen dimensions: 1050 x 650 (900) mm • Tie-bar spacing: Tie-bar-less (nemá) • Max. platen stroke: 1200 mm • Min. mold height: 350 mm • Centering ring: 160 mm • Ejector pin length: 330 mm • Ejector pin internal thread: M16 • Core pulls: 2 • Air blow: 1 • Hydraulically operated nozzles: No • Pneumatically operated nozzles: No • Number of hot runners: 8 • Max. injection volume: 607 ccm • Working hours: 60,701.3 h

Condition: ready for operation (used), Year of construction: 2006, clamping force: 3,500 kN, screw diameter: 60 mm, injection weight: 700 g, Hydraulic injection moulding machine manufactured in 2006. This Krauss Maffei KM 350-1900 C2 features a clamping force of 350 t and a screw diameter of 60 mm. It offers a maximum platen stroke of 1600 mm and a platen size of 1060 x 1095 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 350-1900 C2 machine we have for sale. Contact us for further details. • Injection pressure: 2420 bar • Platen dimensions: 1060 x 1095 mm • Tie-bar spacing: 800 x 710 mm Hjdpfx Alszlrkvo Tsnp • Max. platen stroke: 1600 mm • Min. mold height: 680 mm • Centering ring: 160 mm • Ejector pin length: 400 mm • Ejector pin internal thread: M16 • Core pulls: 3 • Air blow: 2 • Hydraulically operated nozzles: 1 • Pneumatically operated nozzles: 1 • Number of hot runners: 10 • Max. injection volume: 769 ccm Additional equipment • Conveyor • Manipulator / Robot

Condition: used, Year of construction: 2003, Clamping force: approx. 50 tons Hodpjzlhxijfx Al Tonp Components: 1 Horizontal screw diameter: approx. 30 mm Core pull: 0 Hot runner zones: 0 Flow rate: approx. 130 l/min Frequency: 50 Hz Power supply: 3/N/PE AC 400 V Pressure: approx. 210 bar Current: 94 A Weight: approx. 3.3 tons

Condition: used, Year of construction: 2022, Operating hours: 22932 Hedpfxezlhdrs Al Tonp Clamping force: approx. 550 t Number of components: 1 Mold installation height: approx. 350 / 1100 mm Opening stroke: approx. 1300 mm Tie bar distance: approx. 830 × 920 mm Horizontal screw diameter: approx. 65 mm L/D ratio: 1 / 21.5 Core pull: 4 Special equipment: Additional unit (not for high glass fiber content); needle shut-off Hot runner zones: 32 Heating power: approx. 33 kW Frequency: 50 Hz Power supply: AC 400 V 3P/N/PE Current: 228 A Motor power: approx. 63.5 kW Installed power: approx. 137 kW Short-circuit rating: approx. 25 kA Machine weight: approx. 22.0 t

Condition: used, Year of construction: 2000, Clamping force: approx. 200 t Number of components: 2 Mold installation height: approx. 310 / 760 mm Opening stroke: approx. 300 / 575 mm Tie bar spacing: approx. 560 × 560 mm Horizontal screw diameter: approx. 50 mm Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 2 Hsdpfszlg S Iox Al Tonp Special equipment: Needle gate Hot runner zones: 16 Flow rate: approx. 190 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 196 A Current 2: 110 A Current 3: 86 A Current 4: 67 A Weight: approx. 9.7 t

Condition: used, Year of construction: 2001, Operating hours: 193589 Clamping force: approx. 250 t Number of components: 1 Tie bar distance: approx. 840 × 840 mm Horizontal screw diameter: approx. 45 mm Core pull: 2 Hjdpfszlg N Hex Al Tenp Hot runner zones: 0 Flow rate: approx. 206 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 139 A Current 2: 102 A Current 3: 37 A Current 4: 67 A Weight: approx. 10.7 t

Condition: used, Year of construction: 2014, Operating hours: 27,317 Clamping force: approx. 180 t Number of components: 2 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hnsdjzlgvyepfx Al Tjp Hot runner zones: 28

Condition: used, Year of construction: 2015, Operating hours: 52873 Clamping force: approx. 180 t Number of components: 2 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 28 Frequency: 50 Hz Hnjdezlgu Nepfx Al Tsp Supply voltage: 400 V Weight: approx. 10.1 + 0.6 t

Condition: used, Year of construction: 2015, Operating hours: 8877 Hsdpjzlgkdefx Al Tenp Clamping force: approx. 180 t Number of components: 3 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 34 Frequency: 50 Hz Supply voltage: 400 V Approximate weight: approx. 10.1 + 0.6 t