Inter Invest Doo

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of construction: 2016 For cleaning grinding emulsions Supply of max. approx. 250 L/min. at approx. 3.5 bar water Transfer to the filter system is carried out by the customer, air and foam-free. Temperature max.: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to dirty tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Rsdpfx Aszwccmsdzjcf Separation particle size: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particles: approx. 5.14 m3 Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process flow: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with consistent consistency The dirty liquid is fed via customer-provided lift stations. The swarf and fine sludge produced during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. In the upper scraper section, the sludge is pre-dried. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system runs fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharge of grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Volume max.: approx. 4.58 m3 Length: approx. 4,000 mm, including 70 mm stiffening Width: approx. 1,890 mm, including 140 mm stiffening Height: approx. 1,105 mm, including 100 mm base profile Neck height: approx. 2,300 mm Theoretical discharge volume max.: 15 kg/h Function: Coolant tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 Bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank. Oil-tight welded, with an internal, circumferential bevel gear, various cover plates (non-walkable plates screwed onto an angle frame), without ladder, without handrail, without internal rungs Volume max.: approx. 0.55 m3 25826

Condition: used, Year of construction: 2016, 1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capacity: 15kg/h, function: coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge, serviced annually, fully functional, no known defects, with documentation. An on-site inspection is possible. Rcjdpfx Adjzvghkozsf

Condition: used, Year of construction: 1994, Filter area: approx. 8m², number of filter leaves: 9, vessel capacity: 720l, allowable operating overpressure: 6bar, allowable operating temperature: 80°C, vessel diameter: approx. 760mm, inlet: DN50, outlet: DN50, vent: DN25, solids discharge: DN350. Pumps and piping are available. Filter empty weight: approx. 750kg, space requirement X/Y/Z: approx. 2000mm/1790mm/2800mm. Inspection possible by arrangement. Rjdpfx Adezu S Adezjcf

Condition: used, Year of construction: 2019, functionality: limited functionality, total width: 1,500 mm, total length: 2,000 mm, total height: 3,000 mm, overall weight: 1,200 kg, Equipment: documentation/manual, The system is used to clean the air in industrial halls and, depending on the filter configuration used, can be employed for the collection or filtration of dust, smoke, or welding fumes. IVAT filter towers are generally designed for industrial air purification in halls. The filter tower has a motor output of 18.5 kW and was manufactured in 2019. The machine is in used condition with signs of wear and tear consistent with its age and use. The drawer at the bottom has a slight leak. An inspection and functional test on-site can be arranged. The item is sold as shown in the pictures. Key data: Manufacturer: IVAT GmbH Machine type: Filter tower / extraction unit Model: Profi-Tower 28000 K Motor output: 18.5 kW Rodpfszq D Idex Adzocf Year of manufacture: 2019 Condition: used Application area: industrial air purification in halls / extraction CE marking: available

Condition: used, TEDAK 3 Dust Filtration Unit Specifications: Manufacturer: TEDAK AB Country of origin: Sweden Model: TEDAK 3 Article No.: 111200 Serial No.: 13246 Operating pressure: 30 kPa Electrical control cabinet included Rcjdpfx Adozmd Trezsf Filter housing included Suitable for filtration of wood dust, chips and other dry materials in the woodworking industry

Condition: ready for operation (used), Year of construction: 2002, A stationary Rippert filter and dust extraction system is available. Filter sections: 4, Filter elements: filter bags, Filter bag dimensions 1 X/Y: 6603mm/1775mm, Filter bag dimensions 2 X/Y: 6603mm/1200mm, Filter area 1/2: 45m²/60m², Regeneration drives: 4, Regeneration drive power: 1.1kW, Rotary valve: ZS 7.5, Motor power: 0.55kW. An on-site inspection is possible. Rcsdpfx Ajzhnu Asdzef

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: FNE3J07CM027248, compressed air connection: 6 bar, overall weight: 128 kg, Wamflo Filter elements: elliptical sleeves Filter diameter: 800mm Cleaning system: compressed air Rodpfx Adozgubtezecf Filter surface area: 7m2 Filter length: 920mm Filter material: stainless steel

Condition: used, Year of construction: 2022, filter unit . . make HYDAC type FLND KS 400 DDF 50 C 1.2 /-B7 operating pressure max. 25 bar Receiver 2x 3,10 L make GRUNDFOS type MTR3-27/27 A-W-A-HUUV frequency 50 Hz Power 2,20 kW turning speeds 2.863 U/min Headroom 131 m Headroom max. 179 m feed pressure max. 25 bar Temperature max. 90 °C 0 Counter-Clockwise (CCW) dimensions of the machine ca. 0,6 x 0,6 x 1,2 m High-pressure Cooling Retrofit / Conversion Kit for NLX Machines Filter Pump Combination 15 bar GRUNDFOS / HYDAC Redpfezfqgiox Adzocf - NEW and in original packaging consisting of: - HYDAC filter unit 15 bar - GRUNDFOS pump 15 bar - Electrical component kit - pre-assembled

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 200 m², volume flow: 25,000 m³/h, total width: 2,450 mm, total length: 3,600 mm, total height: 7,000 mm, overall weight: 4,000 kg, Equipment: documentation/manual, DUSTY AIR FILTER - ATEX zone 22 Design air flow: 25,000 m³/h Structure: galvanized sheet metal, press bent and bolted, thickness 2-3-4 mm Total filter surface: 200 m² Filter media: antistatic 500 g polyester Explosion relief ventilation panels in horizontal position Discharge: motorized auger 1.1 kW, rotary valve 0.75 kW Upper safety railing Safety ladder Rcodpfx Aozfi Dajdzjf Electrical control panel for machinery

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 512 m², volume flow: 50 m³/h, total width: 2,450 mm, total length: 8,500 mm, total height: 9,000 mm, warranty duration: 12 months, Equipment: documentation/manual, BAG FILTER - GALVANIZED STEEL STRUCTURE AIRFLOW RATE m³/h 50,000 FILTER FABRIC CLEANING VIA AIR JET WITH CONTROL UNIT FILTER FABRIC AREA m² 512 No. 04 ATEX-CERTIFIED ANTI-EXPLOSION PANELS FILTERED MATERIAL DISCHARGE - SCREW CONVEYOR - ROTARY VALVE UPPER GUARDRAIL - SAFETY LADDER CONTROL PANEL Rcjdszfiy Iopfx Adzsf No. 01 ELECTRIC FAN - kW to be defined with the user

Condition: excellent (used), Year of construction: 2018, liter capacity 200 l feed pressure max. 200 bar coolant capacity 950 l Control Siemens total power requirement 45 kW Rcjdpfozczkzox Adzef weight of the machine ca. 1,9 t dimensions of the machine ca. 2,4 x 1,5 x 2,9 m

Condition: used, Belt Filter, Pressure Filter, Emulsion Filter, Sludge Filter, Lubricant Filter, Emulsion Filter, Used Machine Manufacturer: Faudi Dimensions: 2460 x 1660 x 1270 mm Belt size: 2200 x 1270 mm Active filtering surface: 1400 x 1200 mm Capacity : 1200 l/m The Klappbandfilter is used for cleaning contaminated cooling and lubricating fluids in the metalworking field, as well as for processing various sludge waste during rough machining, especially aluminum, or for handling abrasive grinding sludge. When the cooling and lubricating fluids and grinding sludge are cleaned, they can be reused in the process for longer periods, significantly contributing to environmental protection. Additional benefits include heat dissipation at the machining site and optimization of the workpieces' surface quality. The Klappbandfilter is versatile and can also be used independently. Its modular design allows it to be optimally adapted to various conditions. The FAUDI design allows for the buildup and removal of filter cakes up to 15 cm thick. With the extra-high filter cake, the separation performance of the filter is further increased. Filter areas of 1, 1.5, and 2.5 m² per filter are possible. Rjdpfx Adey Uc Uaozecf Filter fineness: Up to 10 µm Medium/Fluids: Oils and machining emulsions Filter auxiliaries: Optionally with or without filter auxiliaries

Condition: ready for operation (used), Year of construction: 2014, A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Rsdpfey Eg Dyjx Adzscf

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, No reserve price – guaranteed sale to the highest bidder! Further details on the technical specifications and configuration of the system can be found in the attached documentation. TECHNICAL DETAILS Inlet Conditions Design flow rate: 40,000 Nm³/h Temperature: 25 °C Relative humidity: 50% Pollutants V.O.C. inlet concentration: max. 305 mg/Nm³ Average LHV: 7,500 kcal/kg Dust: < 3 mg/Nm³ Discharge Conditions after RC System Volume flow: max. 40,150 Nm³/h Temperature: 30 - 50 °C TOC concentration: max. 20 mgC/Nm³ Filtration Unit Air volume flow: max. 44,000 m³/h Operating temperature: 20 °C Rotary Concentrator Number of sectors: 3 Adsorbing active material: Zeolite Process volume flow: max. 41,000 Nm³/h Pollutant inlet concentration: max. 305 mg/Nm³ Process temperature: 20 °C Adsorption air volume flow: max. 38,950 Nm³/h Purge air volume flow: max. 2,050 Nm³/h Desorption air volume flow: max. 2,050 Nm³/h Desorption outlet concentration: max. 5,700 mg/Nm³ Blower BL-01 Air volume flow: max. 4,300 Nm³/h Operating temperature: 60 °C Static pressure: 5,900 Pa Total pressure: 6,290 Pa Power consumption: max. 12.8 kW Installed power: 18.5 kW Sound pressure level at 1.5 m distance: max. 89 dB(A) Rcjdpfx Ajyz Rf Tedzsf Blower BL-101 Air volume flow: max. 36,700 Nm³/h Operating temperature: 35 °C Static pressure: 2,400 Pa Total pressure: 2,620 Pa Power consumption: max. 38.4 kW Installed power: 55 kW Sound pressure level at 1.5 m distance: max. 84 dB(A) Blower BL-02 Air volume flow: max. 135 Nm³/h Operating temperature: 30 °C Static pressure: 5,000 Pa Total pressure: 5,050 Pa Power consumption: max. 0.4 kW Installed power: 2.2 kW Sound pressure level at 1.5 m distance: max. 70 dB(A) EQUIPMENT Documentation/manual included Note: The system has already been dismantled.

Condition: used, Dinnissen pneumatic conveying system Entirely constructed in stainless steel Equipped with DCE filter (6 sintamatic cartridges) Redpjyvv Ivsfx Adzecf Fitted with Dinnissen bottom valve Suction tube 100mm Various cleaning hatches Outlet 300mm x 300mm (optionally convertible to round 300mm) Year of construction: 2002

Condition: ready for operation (used), Year of construction: 2019, Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Rodpfxeyvuvle Adzocf

Condition: used, Year of construction: 2001, liter capacity . l Rsdpfx Aeyuy Tljdzocf feed pressure . bar coolant capacity . l

Condition: like new (used), Year of construction: 2007, AME FBH 1575 Walking device for the production of concrete elements, SP7 control, year of manufacture 2007; semi-automatic stacker with mobile pallet magazine FGH 1575, product sprinkler, concrete transport container, sweeper for the production area, 4 production moulds, portable platform, additional vibrating platform, cable drums, spare parts package. The listed devices have never been used and are in brand new condition! Rcodpfx Aeylihmodzsf The stated price is for one set of devices. Two sets are available.

Condition: used, Używana klaryfikująca prasa filtracyjna produkcji Seitz Orion typ OF 100/150 w wykonaniu ze stali kwasoodpornej. Prasa posiada 154 płyty filtracyjne wykonane ze stali kwasoodpornej o wymiarach 1000 mm x 1000 mm, oraz dwie płyty końcowe. Powierzchnia filtracji ok 310 m2. Zamknięcie hydrauliczne. Prasa zamontowana na ramie ze stali KO. W zestawie z maszyną przyłącza podawania, manometry i lokalny panel sterowania. Specifications: Material: Stainless steel Plate Size: 1000 mm x 1000 mm # of Plates: 154 stainless steel filter plates Rjdpfeyi Eygex Adzjcf Eyes: 4 Plate Type: Clarifying Surface Area: 310 m2 Closure: Hydraulic

Condition: ready for operation (used), Year of construction: 1998, A SULT dust extraction and filtration system with cartridges is available. Air volume flow: 3000m³/h, filter area: 84m², air pressure: 6bar, compressed air consumption: approx. 10Nm³/h, max. operating temperature: 70°C, fan speed: 2980rpm, total pressure drop: 4100Pa, number of cartridges: 4. Machine dimensions X/Y/Z: approx. 2000mm/900mm/5000mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible. Rsdsyfv N Dspfx Adzjcf

Condition: ready for operation (used), A Schenk Orion filter press with a deflection chamber is available. Number of plates: 85, frame: 100, plate dimensions X/Y: 600mm/600mm, max. filter area with 80 plates: approx. 22m², pipe connection diameter: 50mm, throughput capacity: approx. 30hl-45hl/h, max. throughput capacity: approx. 75hl/h. An on site inspection is possible. Rjdpfxox Sywtj Adzecf

Condition: used, Year of construction: 2009, Fabricant : WAM Redpfx Ajx R D Hiedzecf Modem ATEX : FPXHTD12VA1498 Year : 2009 Type: Atex horizontal dust filters ATEX: ExII3D135°C(T4) Suction fan: 2.2 kW Separation type: Filter sleeves Filtration surface area: 12 m² Purging solenoid valve   Filters not included with the machine. -> Supply of new consumables: this service may be subject to an additional quote.

Condition: used, Year of construction: 2011, functionality: fully functional, Donaldson DCE Torit DMC-MMC filter oil mist separator, oil separator, oil extractor, air filter Year of manufacture: 2011 Connection: 400V, 1.5KW Fully functional condition, see pictures Forklift available for loading Redpfxexri T Us Adzocf Collection only by appointment in 75053 Gondelsheim Shipping by freight forwarding possible, please inquire with postal code

Condition: used, functionality: unexamined, machine/vehicle number: V250 (Bofa) | WLA250 (Weidinger), input voltage: 230 V, Used solder fume extraction units from Bofa & Weidinger Rcedpfx Asxp H Ttjdzjf Model: V250 (Bofa) | WLA250 (Weidinger) Voltage: 230V (50Hz) | 1.1A Including power cable.

Condition: ready for operation (used), Year of construction: 1993, A candle filter system Faudi with precoating principle for the treatment and purification of grinding oil is available. Operating fluid: grinding oil, flow rate: 360m³/h, tank capacity: 180m³, control: Siemens. Documentation available. An on-site inspection is possible. Rcjdpfx Adoxnbr Ijzef