ÖVG-Versteigerungs GmbH

Condition: excellent (used), Year of construction: 2007, Operating hours: 100,050 h Press force: 850 kN Stroke: 445 mm Operating pressure: 300 bar Overrun time: 95 ms Overrun distance at 220 mm/s: 10 mm Overrun distance at 160 mm/s: 8.5 mm Safety distance: 190 mm Bledpfx Aoyyyfajcvof

Condition: excellent (used), Year of construction: 2002, Operating hours: 49,336 h Press force: 1,300 kN Bsdpfx Acjyyyc Sjvolf Stroke: 365 mm Operating pressure: 340 bar Overrun time: 58 ms Safety distance: 93 mm

Condition: excellent (used), Year of construction: 2002, Operating hours: 38,516 h Press force: 500 kN Stroke: 215 mm Operating pressure: 290 bar Overrun time: 48 ms Safety distance: 77 mm Bjdeyyybbepfx Acvelf

Condition: excellent (used), Year of construction: 1994, machine/vehicle number: 0694-2676, power: 7.5 kW (10.20 HP), table length: 3,050 mm, throat depth: 500 mm, distance table to ram: 750 mm, clearance between the columns: 3,200 mm, overall weight: 6,200 kg, TECHNICAL SPECIFICATIONS Useful cutting length: 3,050 mm Cutting capacity: 4–6 mm Distance between uprights: 3,200 mm Throat depth: 500 mm Blsdeyyvbdepfx Acvsf Back gauge: 750 mm Cutting angle adjustment: 0°30’ – 2°30’ Motor power: 7.5 kW Strokes per minute: 17–33 Approximate weight: 6,200 kg Machine complete with: Rear sheet support Instruction manuals

Condition: used, Year of construction: 2011, machine/vehicle number: B0702A0651, functionality: fully functional, operating hours: 30,858 h, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, pressing force: 36 t, operating speed: 220 mm/s, table length: 1,000 mm, overall weight: 2,600 kg, year of last overhaul: 2011, Equipment: CE marking, safety light barrier, The equipment has been fully maintained and is ready for immediate operation. The equipment has been in operation for 30,858 hours, and there are no operational issues (line laser not working). If you wish to use the line laser, it can be repaired for an additional fee. The cost is approximately 600 EUR. Bledpfxoyytuhj Acvef - Press beam OK - Block laser OK - Illumination (auto) OK - Line laser Not OK I would prefer the buyer to be familiar with the TruBend7036. If purchased in South Korea, I can provide free operator training.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 549 h, pressing force: 41 t, stroke length: 200 mm, total width: 1,584 mm, total height: 2,449 mm, overall weight: 4,000 kg, travel distance X-axis: 300 mm, travel distance Z-axis: 955 mm, product length (max.): 1,520 mm, number of axes: 6, This 6-axis Bystronic Xpert 40/1030 hydraulic press brake was manufactured in 2016. It features a pressing force of 400 kN and a bending length of 1030 mm, ensuring efficient performance. The machine includes a maximum stroke of 200 mm and an advanced ByVision Bending control system with a 22-inch Full HD touch display. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 40/1030 machine we have for sale. Contact us for further details. • Number of axes: 6-axis backgauge (Y1, Y2, X, R, Z1, Z2) • R-axis travel: 100 mm • Y-approach speed: 300 mm/s • Y-working speed: 25 mm/s • Open height: 515 mm • Distance between side frames: 1060 mm • Table width: 60 mm • Total connected load: 12 kW • Operating voltage: 400 VAC (3 phase, 50 Hz) • Control voltage: 24 VDC • Nominal current fuse: 32 A • Max. hydraulic pressure: 320 bar • Control system: ByVision Bending with 22-inch Full HD touch display Bledoyycbqopfx Acvof Additional equipment • Integrated tool storage cabinets • Multiple sets of bending tools (punches/dies) • Ergonomic foot switch Technical Specification Bending Length 1030 mm

Condition: excellent (used), Year of construction: 1996, Trumpf TC500-1300 including Sheetmaster, powered on Bljdpfjyybc Hex Acvef

Condition: excellent (used), Year of construction: 2008, Trumpf TruBend 5085 Manufacturer: TRUMPF Model: TruBend 5085 Bjdpfx Acsyxdv Hjvslf Year of manufacture: 2008 Product number: F1025K Serial number: B0503A0302 Maximum press force: 85 tons Stroke: 540 mm Clearance: 445 mm Weight: 8,600 kg Bending length: 2,720 mm

Condition: ready for operation (used), Year of construction: 2021, operating hours: 8,000 h, pressing force: 40 t, number of axes: 4, This 4-axis LVD DYNA-CELL press brake was manufactured in 2021, featuring a maximum pressing force of 40 tons and a working length of 1530 mm. If you are looking to get high quality bending capabilities consider the LVD DYNA-CELL machine we have for sale. Contact us for more information. Bjdpfx Asyxc Ihscvelf • Maximum pressing force: 40 tons • Working length: 1530 mmVoltage 50-400Electrical Plan IECDistance Between Uprights 1535mmStroke 200Distance Table to Ram mm 400Throat Depth mm 175Closing Speed (50Hz) mm/s 100Working Speed (50 Hz) 25Return Speed (50Hz) mm/s 100Motor (50Hz) kW 2x 4.2Machine Weight kg 4750Table 60Centering Table Centering table 5.7 - 7.0Tool Clamping System DP3090 Wila StyleHydraulic Clamping DP3180 Hydraulic ClampingSafety Standards DP3580 CE CertificateGuarding Side and rear doorsControl System 15" Touch-BControl Language TouchB, GermanBackgauge X1X2 300 R100 Z1 Z2Electrical Cabinet Cooling DP8510 Air conditioningRobot Interface Dyna Cell Kuka RobotLaser Easy-Form DP8302 Laser Easy-FormBackgauge Finger Type DP5621 Robot fingerLazersafe DP5320 Lazersafe

Condition: good (used), Year of construction: 2001, functionality: fully functional, working width: 3,000 mm, control type: CNC control, Machine Press force: 230 tons Bending length: 3060 mm Installation height, max. distance between lower edge: 535 mm Punch and upper edge die holder Press beam tilt: +/- 10 mm Clear frame passage: 2690 mm Throat depth: 410 mm Table width: 200 mm Working height with 100 mm tool height: 1050 mm Speeds: 200 mm/sec Y-axis: - Rapid traverse - Working stroke - Return X-axis: 500 mm/sec R-axis: 300 mm/sec Blodpfeyw Ubwox Acvsf Accuracy: Axis positioning deviation Y-axis: 0.01 mm X-axis: 0.04 mm R-axis: 0.08 mm Stroke lengths / Backgauge range Y-axis stroke: 365 mm X-axis travel: 600 mm Max. backgauge range in X: 860 mm R-axis travel: 250 mm Control: DA 65 Basic configuration Additional equipment Connected load: 38.5 kVA Electrical connection approx. Pneumatic connection: 6-7 bar Dimensions and weights: 3660 x 2310 mm Required space (length x width) Height: 3059 mm Weight (approx.): 18,210 kg Equipment: - Crowning - Bending aids - Back gauge

Condition: excellent (used), Year of construction: 2014, operating speed: 8 mm/s, reverse speed: 100 mm/s, total length: 2,470 mm, total width: 2,000 mm, total height: 2,100 mm, overall weight: 3,800 kg, controller manufacturer: CYBELEC CNC, working width: 2,100 mm, bending force (max.): 40 t, distance between stands: 1,650 mm, control type: CNC control, number of axes: 4, actuation type: hydraulic, Press brake TOSKAR - TA 2100-40 MACH-ID 9474 Make: TOSKAR Type: TA 2100-40 Control: CYBELEC CNC Year: 2014 Cybelec 2D Controll system 4 Axis controlled Y1 / y2 / X / Delta-R 1 set universal tooling Fiessler laser safe  Sheet support arms front side Max. bending length: 2100mm Distance between column: 1650mm Max. pressing force: 40T Beam stroke: 130mm Table Width: 100mm Troth beam: 300mm Approch speed: 100mm/min. Working speed: 8mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1009mm Number of controlled axis: 4 Power: 5.5kW Length: 2470mm Width: 2000mm Height: 2100mm Bjdpfx Acsyw Ip Ievolf Weight: 3800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, table length: 2,500 mm, table width: 1,250 mm, Available: medium-format Trumpf CNC punching machine, complete with SheetMaster, SortMaster Box Linear Special, and GripMaster. All functions available: multi-tool, threading, high-speed marking, SoftPunch. Punching force: 220 kN, max sheet thickness: 8 mm, X/Y travel: 2535 mm / 1280 mm, max workpiece weight: 200 kg, X/Y feed rates: 100 m/min / 60 m/min, simultaneous: 116 m/min, punching/marking rate: 1200/min / 2800/min, C-axis tool rotation: 330 rpm. Machine dimensions X/Y: approx. 6800 mm / 6100 mm, weight: approx. 15,000 kg, operating hours: approx. 58,000 h. Documentation available. On-site inspection possible. Offers and videos of the plant in operation can be provided upon request. Bsdpsywg Agsfx Acvelf

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_1, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Bsdpfxeyu Uwxe Acvelf Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: ready for operation (used), Year of construction: 2007, pressure 30.0 t chamfer lenght 800 mm back stop - adjustable max. 420 mm stroke of upper beam 100 mm dayligth 310 mm working feed 10.0 mm/sec return speed 12.0 mm/sec Control VISION 120 oil volume ca. 38.0 l voltage 380 V total power requirement 4.5 kW weight of the machine ca. 890 kg dimensions of the machine ca. 1250 x 950 x 1900 mm current new price approx. 24.000 euros special price on request Equipment: - electro-hydraulic NC press brake - easy to operate - UNITRONICS "VISION 120" NC control system * for press depth back gauge (Y X axis) - NC electro-motorized back gauge (X axis) * Input of target/actual value possible * 2x manually adjustable stop fingers - Operation front right - Many different insert/bending tools * Top tool holder : AMADA/PROMECAM - 1x freely movable foot switch Bedpfxoyuzchs Acvolf - EMERGENCY OFF button at the front - Rear safety device - operating instructions

Condition: good (used), Year of construction: 1999, functionality: fully functional, CNC electric press brake from Safan Model: SMK 2050 40 Capacity: 2050 x 40 tons TS1 CNC control Y1, Y2, X and R axes Pneumatic flat table Bljdpfx Asytbxyjcvsf Light barrier Year of manufacture: 1999

Condition: good (used), Year of construction: 2008, functionality: fully functional, Servo-electric press brake Make: TRUMPF Model: TruBend 7036 Year of manufacture: 2008 Technical Data Manufacturer: TRUMPF Model: TruBend 7036 Year built: 2008 Press force: 36 t Bending length: 1020 mm Working height approx.: 1150 mm Space required: 1805 x 1330 x 2380 mm Weight: 2,600 kg Standard Equipment - Rigid machine frame - Press beam - High-dynamic, electronic direct drive (torque motor) - Inductive length measuring system with temperature compensation - Switch cabinet air conditioning - Ergonomic machine design Bodpfx Aoyr Nckjcvelf Optional Equipment - Tool clamping (Wila) top and bottom - Integrated TRUMPF TASC 6000 control - Safety light curtain at front - Backgauge system: 6 axes: X1, X2, R1, R2, Z1, Z2 - Comfort support table - BendGuard (with block laser) Safety - Side-swiveling safety doors - Protective rear cover - 2-button foot switch for standing and seated operation - CE marking Tooling - Lower tool EV/S-W10, V10/84°/R1, H 100 mm, L = 1000 mm, segmented - Upper tool OW200/K, offset, 86°/R1, H 100 mm, L = 1000 mm, segmented All information subject to change. A powered demonstration is always possible in our showroom.

Condition: ready for operation (used), Year of construction: 2008, overall weight: 10,500 kg, number of axes: 8, Press brake manufactured in 2008. This Warcom DINAMICA 3000x100 features a bending force of 100 tons and a bending length of 3000 mm. It is equipped with an 8-axis backgauge system and a CNC Delem DA65 control for precision operations. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 3000x100 machine we have for sale. Contact us for further details regarding this machine. Bodoyrgdfspfx Acvslf • Condition: Overhauled • Bending force: 100 tons • Stroke: 400 mm • Axes: 8 backgauge axes (Y1, Y2, Z1, Z2, X1, X2, R, X) • Crowning/Camber: Yes • CNC control: Delem DA-65 • Main motor: 11 kW • Speeds: • Approach: 200 mm/s • Working: 10 mm/s • Return: 180 mm/s Technical Specification Bending Length 1000 mm

Condition: used, Year of construction: 2011, Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Height: 2380 mm Weight of machine approx.: 2600 mm Standard configuration Machine - Stable machine frame - Optimized in terms of deformation - Highly-dynamic electro-mechanical direct drive (torque motor) - Inductive linear measurement system with temperature compensation - Switch cabinet air-conditioning- Ergonomic Machine designBack Gauge System - Highly-dynamic safety backgauge system - Gauge fingerControl - Integrated Machine controller TASC 6000 - Numerical workshop programming - Windows XPe, Pentium M with 1.1 GHz clock frequency - 1 GB RAM memory - 15 " Touch screen - Network capability - TeleserviceSafety - Safety doors, can be swung sideways - Rear cover - 2-button footswitch, for seated or standing operationOptions for ergonomy - Comfort supporting table (front)- Comfort foot rest - LED work area lighting, front - Operating unit, swivel-mounted - 1 shelf bracket and 2 document repositoriesOptions for productivity - BendGuard (with block laser) - Graphic workshop programming - Automatic tool clamps Bsdpfx Aeyrf Dkjcvslf Extended machine accessories Extended Machine Accessoires Backgauge System - Backgauge system 6-axes Automation

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,740 h, pressing force: 14 t, number of axes: 2, Press brake manufactured in 2019. This FEYSAMA MCCH 6/3050 features a press force of 135 tons and a bending length of 3200 mm. It includes a programmable stroke of 160 mm and a backgauge with a stroke of 800 mm. If you are looking to get high-quality bending capabilities, consider the FEYSAMA MCCH 6/3050 press brake we have for sale. Contact us for further details. • Operating hours: 2740 • Distance between uprights: 2700 mm • Throat depth: 415 mm Bledpeyrb Sqsfx Acvjf • Max distance ram/table: 390 mm • Programmable stroke: 160 mm • Backgauge with ball screw, stroke: 800 mm • CNC control: ESTUN E21, 2-axis (controls bending dimensions and backgauge) • Condition: Very good Additional equipment • Quick clamping tool holder • Bending punch: 120 mm height, 88° angle, segmented • Multi-V die: 95 × 95 mm, V openings 10/12/16/20/25/30/48/60 mm • 2 backgauge fingers with micrometric adjustment and manual spacing • 2 adjustable front supports • Safety light curtains • LED work area lighting • User manual, electrical and hydraulic diagrams Technical Specification Bending Length 3200 mm

Condition: new, neu ca. 12 - 14 Wochen ab Auf Slowakei 23700 € 455.04 € 40 to 800 mm X und Y Achse 100 mm 310 mm hydraulisch 38 l 6 kW 1750 mm Bljdsynngyepfx Acvjf 950 mm 1900 mm 1640 kg 420 mm 1 10 mm/s 12 mm/s 40 mm/s 0.02 +/- mm 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 74800 € 1413.72 € 40 to 2050 mm Y1 / Y2 / X und R Achse 200 mm 1700 mm 350 mm 440 mm servomotorischer Spindela 180 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 2600 mm 1450 mm 2650 mm Bedpfeynm A Hox Acvelf 4400 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 " Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components optional equipment: Z1/Z2-axes CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 72300 € 1366.47 € 40 to 1250 mm Y1 / Y2 / X und R Achse 200 mm 1050 mm 250 mm 440 mm servomotorischer Spindela 115 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 1950 mm 1450 mm 2650 mm 3600 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 " Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components Bledpfx Aceynm Aysvof optional equipment: Z1/Z2-axes CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: ready for operation (used), Year of construction: 1999, Press brake manufactured in 1999. This AMADA HFB 5020 features a maximum pressing force of 500 kN and a maximum stroke of 200 mm. With a robust machine weight of 4700 kg, it is designed for durability and efficiency. If you are looking to get high-quality pressing capabilities, consider the AMADA HFB 5020 machine we have for sale. Contact us for further details. • Maximum Pressing Force: 500 kN • Maximum Stroke: 200 mm • Dimensions of Machine (LxWxH): Not provided • Weight (kg): 4700 kg • Noise Level: < 70 dB(A) • Stopping time: 60 ms • Stopping distance: 6 mm • Rated Current: 11.4 A • Number of Phases: 3 Bljdpfxjynadwj Acvof • Voltage / Frequency: 400 V / 50 Hz (415 V / 50 Hz) • Installed Power: 6 kW

Condition: good (used), Year of construction: 2001, functionality: fully functional, HACO PPM 1640 Blodpfx Aceym At Eovof Technical condition: Good Bending length: 1600 mm Tonnage: 40T Press brake type: NC controlled Backgauge: X-axis CNC controlled, R-axis manually height adjustable Daylight: 295 mm Throat depth: 200 mm Stroke: 100 mm Control: Robosoft Motor power: 4.1 kW 380V Tooling: yes, upper tool + Multi V Tool clamping: European standard Serial number: 90646 Year of manufacture: 2001 Total length: 2100 mm Total height: 2300 mm Total depth: 1450 mm Weight: 2500 kg

Condition: excellent (used), Year of construction: 2021, Bending length: 4100 mm Press force: 240 tons Equipped with a comprehensive set of bending tools Manufacturer: Baykal Model: APHS 41240 Bedpjymldgjfx Acvslf Power supply: three-phase Year of manufacture: 2021 Serial number: 28635