BALLAS GmbH

Condition: used, Year of construction: 1996, workpiece length 55- 170 mm work piece width max. 28 mm workpiece height max. 27,5 mm Lhedjy Ty Hqspfx Ahbog milling motor 2 cut-off saw 1 Special machine APK automatic sawing and milling machine for cutting wooden blocks to length and then milling them. Special design for the production of cutlery tray inserts (see pictures) or similar workpieces. Work sequence: 1. feeding the material from the magazine 2. cutting (sawing) to the desired length 3. milling of the cut workpieces 4. ejection of the finished part.

Condition: good (used), Bernardo 320 multi-function machine: saw, planer, router – 5-in-1 Planer: width 32 cm, max height approx. 220 mm, 3 knives, 1 feed speed, Jointer: width 31 cm, table length approx. 140 cm, 3 knives, adjustable fence, Router: spindle diameter 30 mm, 2 speeds, 3500/7000 rpm, side carriage, adjustable fence, Saw: Lodpoy Ti Tmsfx Ahbjhg adjustable up-down and 0-45 degrees, side carriage, guide rail on the side carriage, Horizontal drilling machine: Table adjustable up-down, front-back, and left-right. The machine has 3 motors, each with 4 kW. Power supply: 380V. Used machine in good condition, ready for operation. Robust multi-function machine. Weight: 760 kg.

Condition: excellent (used), Robland x310 multi-function machine: saw, planer, router – 5-in-1 Planer: width 31cm, Lodpfxjy S Txwj Ahbjhg max. height approx. 200mm, 3 knives, 1 feed speed, Jointer: width 31cm, table length approx. 140cm, 3 knives, adjustable fence, Router: spindle diameter 30mm, 1 speed, side table, adjustable fence, Saw: adjustable up-down and 0-45 degrees, side table, fence on the side table, Horizontal drill press: table adjustable up-down, front-back, and left-right, the machine has 3 motors, each with 2.2KW, power supply 220V, used machine in very good condition, ready to work, sturdy multi-function machine.

Condition: good (used), Year of construction: 2001, cutting height (max.): 240 mm, cutting width (max.): 410 mm, Surface planer and thicknesser GRIGGIO FS 410 Year of manufacture: 2001 Planing width: 410 mm Thicknessing height: 9-240 mm Lhsdpfxsy S E Uke Ahbeg Spindle speed: 5000 rpm Footprint: 2100 x 1500 mm Immediately available

Condition: new, Year of construction: 2024, For sale is a new Felder panel saw K540S with a cutting height of up to 140 mm. The machine is an exhibition unit in our showroom and is therefore as new (full warranty). Lhedpfxjy R N Apj Ahbeg Technical data: - Cutting height: 140 mm - Saw blade diameter: 300–400 mm - Motor: 5.5 kW / 7.5 HP - X-Roll sliding table, cutting length: 2800 mm - Rip fence cutting width: 800 mm - Outrigger table: 1300 mm - Crosscut fence on outrigger: 2600 mm - 'Easy-Glide' tilt segment guide - CE-compliant overhead guard - 3x 400 V / 50 Hz The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: panel saw, sliding table saw, circular saw, table saw, woodworking machine, Felder Reference: R-A0117

Condition: excellent (used), CATALOG NUMBER 7762 TECHNICAL DATA THICKNESSER: - shaft width: 320 mm - 3-knife planer shaft - max thickness of the processed element: 180 mm Ledpfx Ahjy N Rc Isbshg - thicknesser shaft guard - from above: – anti-kickback fingers – feed shaft, toothed – planer shaft – outfeed shaft, smooth, feed CIRCULAR SAW: - max blade diameter: 300 mm - max cutting height: 80 mm - blade bore diameter: 30 mm - adjustable blade up/down - cutting width with fence: 270 mm - table dimensions: 750x460 mm - fence SPINDLE MOULDER: - spindle diameter: 30 mm - adjustable spindle up/down - spindle height: 100 mm - fence - extraction port diameter: 100 mm - dimensions (LxWxH): 1700x2400x1100 mm - weight: 340 kg ADVANTAGES – Bulgarian production – Very good condition – Multi-function, used Net price: 6,900 PLN Net price: 1,640 EUR at exchange rate 4.2 EUR (Prices may vary with larger fluctuations)

Condition: new, Year of construction: 2026, For sale is a high-quality Robland multi-combination machine. This unit integrates several woodworking functions in a compact and extremely robust design—ideal for workshops, joineries, or ambitious woodworkers. General Data: + Weight: 560 kg + Motor power: 3 kW (4 HP) Circular Saw: + Saw blade diameter: 250 mm + Speed: 4500 rpm + Max. cutting height: 85 mm + Swivel range: 90° – 45° + Sliding table: 1450 mm + Rip fence cutting width: 655 mm + Extraction ports: 100 mm + 60 mm Spindle Moulder: + Spindle diameter: 30 / 32 / 50 mm / 1¼" + Spindle speeds: 3000 – 6000 rpm + Max. tool diameter: 180 mm + Max. tool height: 120 mm Lhsdpfjy Nyquox Ahbsg + Travel: 140 mm + Tilting up to 90° + Optional tenoning hood up to 250 mm + Extraction port: 100 mm Planer & Thicknesser: + Cutter block diameter: 70 mm + Cutter block speed: 5500 rpm + Working width: 310 mm + Planer table: 1320 x 310 mm + Thicknessing height: up to 230 mm + Number of knives: 3 + Tersa cutter block + Planer knives: 310 x 25 x 3 mm + Feed speed: 6 m/min + Extraction port: 100 mm + Mortising unit (optional) + Drill chuck: 0 – 16 mm + Travel: 165 x 140 mm + Drilling depth: 85 mm Location: 39340 Haldensleben Price: €5,750 net

Condition: good (used), For sale is a used MiniMax 5-function combination machine with a cutting length of 1500 mm. The machine is in good condition and has been serviced and inspected by our qualified technicians. Technical specifications: - Cutting length: 1500 mm - Cutting width: 700 mm - Cutting height: 103 mm - 2 spindle speeds - 3-knife planer cutterblock - Planing width: 300 mm Ledpfoy Nxk Hox Ahbjhg - Jointing length: 1400 mm - 3 motors, each 2.2 kW / 3 HP The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thickness planer, thicknessing machine, circular saw Reference: R-E297B

Condition: excellent (used), For sale is a used Felder KFS-36 circular saw and milling machine with 3 milling speeds. The machine is in very good condition and has been refurbished and inspected by our specialized staff. (Fully operational) Technical specifications: - Tiltable circular saw and milling spindle 90-45° - Cast iron sliding table with mitre fence - Outrigger table - 3 milling speeds: 3800/6100/7800 rpm - Boring support Lhsdpfx Ajy Nmq Iohbsg - 3 motors, each 2.2 kW / 3 HP The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, spindle moulder, combination machine, combi machine, milling machine Reference: R-C0723

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Ledpfxey Ni Ayj Ahbohg

Condition: excellent (used), Year of construction: 2023, DEMONSTRATION MACHINE! For sale is a used Felder KF 700 SP sliding table saw & spindle moulder with a cutting width of 800 mm. The machine is in excellent condition and has been refurbished and inspected by our professional staff. (Fully functional) Technical data: - Tilting circular saw and spindle moulder 90-45° - Sliding table 2500 mm Lhjdpfxjy Hgxme Ahbjg - Extension table with mitre fence 2600 mm - Rip fence with fine adjustment - Cutting width 800 mm - Spindle fence with multi-adjustment system - 4 spindle speeds - 3 motors, each 7.5 HP (5.5 kW) - Automatic star-delta start The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, spindle moulder, combination machine, combi machine, milling machine Reference: R-D1618

Condition: excellent (used), Multi-function machine, panel saw, thickness planer SCM Casadei Model: C 30 C Thickness planer 3 kW: Width: 30 cm, Max height approx. 200 mm, 3 knives, 1 feed speed, Jointer: Width: 30 cm, Table length: 150 cm, 3 knives, Adjustable angle fence, Spindle moulder 3 kW: Spindle diameter 40 mm, Spindle height adjustment up-down, 4 speeds, Side sliding table, Adjustable fence, Panel saw 3 kW: Scoring unit, Height and 0-45 degree angle adjustment, Sliding table 225 cm, Ruler on side table, Max saw blade 315 mm, Ljdpfjy Eyhrex Ahbshg Horizontal drilling machine: Table adjustable up-down, front-back, left-right, The machine has 3 motors, Power supply 380V, Used machine in good condition, ready for operation, Robust and multi-functional.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Complete Corali automatic pallet production line. The production line is ideal for example, to produce paper and cardboard pallets. The automatic setup for fast changeover enables top efficiency even with small production runs. Machine Is in use and operational. Ledpfxsy Exvne Ahbehg Facts about the line - Deck nailing unit - Leg nailing unit - Assembly unit - Foiling unit, 6 rolls - Ink printing unit - Fast change setting, change over time about 5 min. - Minimum production series up from 15 pcs - Capacity approximately 1800 pcs / shift - Pallet sizes min. 530x530mm, Max 1500x1250mm - Wooden blocks / two block cutting saws and convoyer - Compressed blocks can be loaded manually - Closed and open deck pallets - 2 operators - Corner cutting saw - Robot stacking, - Binding of the stack - Possibility to feed previously manufactured covers to the production line - Manuals both in written and as files - Year of manufacture 2009 The buyer will be responsible for dismantling and transporting the line at the agreed schedule. The line will be sold as a single wholeness.

Condition: excellent (used), Catalogue No.: 7971 The machine is equipped with: – Jointer – Thickness planer – Circular saw – Spindle moulder – Drill TECHNICAL DATA JOINTER: Planer width: 310 mm Planer shaft: 3-knife Table length: 1550 mm Fence Noise reduction comb THICKNESS PLANER: Max thickness of workpiece: 200 mm Thickness planer shaft guard From above: – Anti-kickback fingers – Serrated feed roller – Planing shaft – Smooth outfeed roller Extraction port diameter: 95 mm Lsdey Dfxaspfx Ahbshg SPINDLE MOULDER: Spindle diameter: 30 mm Spindle adjustable up/down Spindle height: 100 mm Max tool diameter: 200 mm Motor power: 2.2 kW / 220V Extraction port diameter: 100 mm DRILL: Max drilling depth: 120 mm Max drilling width: 130 mm Adjustable table: up/down, front/back, left/right Table size: 350 x 300 mm CIRCULAR SAW: Max blade diameter: 300 mm Max cutting height: 70 mm Blade bore diameter: 30 mm Blade adjustable up/down Cutting width with fence: 250 mm Table size: 1150 x 420 mm With side carriage Material clamp and angle fence Extraction port diameter: 100 mm Motor: 2.2 kW / 220V Dimensions (L/W/H): 1870 x 1600 x 1300 mm Weight: 520 kg – Very good condition – 220V power supply – Not repainted – Used multi-purpose machine Net price: 13,900 PLN Net price: 3,310 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant rate fluctuations)

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Ledpsyzdnbefx Ahbohg Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: excellent (used), Panel Saw-Spindle Moulder KNAPP KFS Profi T -used- Sliding table saw with format sliding carriage, with outrigger table, tilt-adjustable circular saw, mitre and angle fence, tilt-adjustable spindle moulder, moulder spindle with reversible rotation (clockwise/counterclockwise), fine-adjustable moulder fence ----- Technical Data ----- Cutting length (sliding table): 2,000 mm Cutting height: 103 mm Cutting width: 700 mm Max. saw blade Ø: 315 mm Saw blade tilt range: 45° Spindle moulder diameter: 30 mm Spindle tilt range: 45° Spindle speeds: 2,850 / 4,000 / 7,800 rpm Saw extraction port: 120 + 40 mm Spindle extraction port: 120 mm Dimensions (LxWxH): 2,010 x 1,230 x 83 mm Weight: 590 kg Ledpfx Asyyzqdohbehg Quality info: - All settings checked - Adjusted according to manufacturer specifications - Complete basic inspection - Thorough basic cleaning - Electrical system checked - Immediately ready for operation

Condition: excellent (used), SLIDING TABLE SAW Carriage length: 1250 mm Scoring unit Saw unit tilts up to 45° Manual saw blade raise and lower Motor power: 2.2 kW SPINDLE MOULDER Spindle diameter: 30 mm Manual spindle raise and lower 2 spindle speeds: 4500/6000 rpm SURFACE PLANER-THICKNESSER Working width: 300 mm 3-knife cutterblock Standard knives Table dimensions: 1500x300 mm Thicknesser table: 300x600 mm Lsdpfx Ahsyymgdsbshg HORIZONTAL BORING MACHINE 460 kg Year: 2009

Condition: used, Year of construction: 2000, functionality: fully functional, cutting height (max.): 96 mm, saw blade diameter: 300 mm, planing width: 300 mm, input voltage: 400 V, power: 3 kW (4.08 HP), input frequency: 50 Hz, sliding table length: 2,250 mm, The used SAMCO CU 300K is a versatile combination woodworking machine designed for professional applications. It integrates multiple machining functions in a single unit and is ideal for workshops with limited space. Despite its year of manufacture, it offers robust construction and reliable performance for daily operations. Machine equipment Circular saw unit Surface planer Thickness planer Milling unit Lhodpfx Ajyyltishbjg Further technical data Maximum thickness planing height: 230 mm

Condition: ready for operation (used), PANEL SAW Carriage length: 1600 mm Cutting height: 75 mm Lhsdpfjyt E R Hjx Ahbjg Scoring unit Tilting saw unit up to 45° Manual raising and lowering of the saw blade SPINDLE MOULDER Spindle diameter: 30 mm Spindle height: 90 mm Manual spindle raise and lower Speeds: 3500/6000/8000 rpm SURFACE & THICKNESS PLANER Working width: 300 mm Maximum thicknesser height: 200 mm 3-knife cutterhead Conventional knives HORIZONTAL DRILLING MACHINE 550 kg 220 V Year: 2016

Condition: new, functionality: fully functional, The CU 260 FS is a multifunctional woodworking machining center that dramatically increases production capabilities even in workshops with limited space. This powerful and innovative machine is not just a combination of devices, but a complete integrated solution, replacing several machines and offering the full range of essential operations: planing, cutting/sawing, milling, and drilling/mortising. The main advantage of this model is the use of a spiral cutter block with replaceable carbide knives, which reduces noise levels by around 50% and extends the sharpness over 20 times compared to a classic straight-knife cutter block. Technical Specifications Voltage: 400 V Dimensions - width: 1600 mm Dimensions - depth: 2340 mm Dimensions - height: 1150 mm Weight approx.: 456 kg Planer Planing width: 250 mm Cutter block speed: 4,000 rpm Working height: 865 mm Number of knives: 24 pcs. Cutter block diameter: 75 mm Planer fence: 720 x 130 mm Fence tilt range: 90° - 45° Maximum chip thickness: 5 mm Motor power: 2.8 kW Motor power S1 100%: 2.0 kW Planer table length: 1,090 mm Thicknesser Thickness table length: 600 mm Thickness planing width: 250 mm Clearance - minimum material height: 5 mm Clearance - maximum material height: 185 mm Maximum chip thickness: 1.8 mm Feed speed: 8 m/min Extraction port diameter: 100 mm Drilling/mortising unit (CWM 250 series - optional) Drilling table size: 370 x 150 mm Westcott drill chuck: 0 - 16 mm Drilling depth: 90 mm Drilling width adjustment: 160 mm Height adjustment: 85 mm Extraction port diameter: 100 mm Circular saw Table size - width: 900 mm Table size - depth: 345 mm Working height: 865 mm Table extension: 600 x 460 mm Sliding table length - panel/roller: 1,600 mm Sliding table width - panel/roller: 240 mm Sliding table, carriage type: Panel Crosscut length / table travel: 1,600 mm Blade size: 250 x 30 mm Cutting height at 90°: 80 mm Cutting height at 45°: 60 mm Ledpfx Ahsytc N Hjbohg Cutting width with guide: 910 mm Main saw blade speed: 4,750 rpm Extraction port diameter: 100 mm Motor power: 3.0 kW Motor power S1 100%: 2.2 kW Spindle moulder Spindle diameter: 30 mm Height adjustment: 110 mm Table opening: 170 mm Clamping length: 90 mm Max. profiling tool diameter: 150 mm Max. tenoning tool diameter: 150 mm Spindle speed min.: 1,400 rpm Spindle speed max.: 8,000 rpm Number of speed steps: 4 (1,400 / 4,000 / 6,000 / 8,000) Extraction port diameter: 100 mm Motor power: 2.1 kW Motor power S1 100%: 1.5 kW Scope of delivery Spiral cutter head with 24 TCT (carbide) knives Spare TCT knives (5 pcs) Planer fence Hold-down clamp Mitre cutting guide Spindle moulder guide Protective guard with extraction nozzle Connecting hose with Y-branch Aluminium fence with stop Circular saw blade 250 x 3.2 x 30 mm / 24 teeth Digital spindle speed indicator Push stick Tools

Condition: used, combined with: - Slot mortising unit - Spindle moulder - Surface and thickness planer - Heavy-duty roller table combined with: Lhedpjycxg Tofx Ahbog Slot mortising unit Spindle moulder Heavy-duty roller table from private owner used, good condition, low operating hours Make: Rex Model: TFZ-D-4 Machine no.: 15.842 Extraction connection D 120/140 mm Space required approx. 1800 x 2000 x 1100 mm Weight approx. 1200 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: used, Year of construction: 1980, control panel Boschert Stanze Year 1990 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Ljdpfx Ahjx U A H Nebjhg Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), CATALOG NUMBER: 7081 TECHNICAL SPECIFICATIONS - JOINTER: - Shaft width: 260 mm - Table length: 1190 mm - Cast iron fence, angle adjustable - Adjustable tables - THICKNESSER: - Max workpiece thickness: 110 mm - Thicknesser shaft guard - From above: - Anti-kickback fingers - Toothed feed roller - Planing shaft - Smooth outfeed roller - Extraction port diameter: 85 mm - CIRCULAR SAW: - Max blade diameter: 160 mm - Cutting height: 25 mm - Blade bore diameter: 30 mm - Blade height adjustable (up/down) - Blade guard - Cutting width with fence: 160 mm - Table dimensions: 710 x 420 mm - SPINDLE MOULDER: - Spindle diameter: 30 mm - Spindle height adjustable (up/down) - Spindle height: 110 mm - Max tool diameter: 190 mm - Fence - Motor approx. 2.2 kW - Dimensions (L/W/H): 1200 x 900 x 800 mm Lhsdpfxsx Swwds Ahbog - Weight: 325 kg ADVANTAGES - Compact, takes up little space - Very good condition - Used multifunctional machine Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 EUR/PLN exchange rate) (Prices are subject to change due to currency fluctuations)

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 26KL29053, cutting height (max.): 85 mm, saw blade diameter: 250 mm, planing width: 310 mm, feed rate X-axis: 6 m/min, total length of planing tables: 1,250 mm, total width: 1,100 mm, total length: 2,100 mm, total height: 860 mm, type of input current: three-phase, jointer table length: 1,250 mm, extraction nozzle diameter: 30 mm, trimming length: 2,000 mm, height adjustment type: mechanical, overall weight: 465 kg, table length: 2,000 mm, chip removal: 2 mm, chip removal for surfacing (max.): 2 mm, table width: 310 mm, number of planer blades: 51, surfacing fence length: 100 mm, cutting length (max.): 2,000 mm, input voltage: 380 V, working height: 860 mm, working width: 100 mm, table height: 860 mm, power: 3 kW (4.08 HP), The machine was only used in a hobby workshop by a single person. It is fully functional. Additional equipment: Silent Power spiral cutter block (planer). Thickness planer height adjustment via handwheel with integrated display. 2 m sliding saw table. I speak German/Hungarian. Lhjdpfxsxw R Anj Ahbsg

Condition: used, Thickness planer: Max planing width: 400 mm Max planing height: 240 mm Min length of planed workpiece: 200 mm Cutter shaft diameter: 700 mm Number of knives: 3 Cutter shaft speed: 5000 rpm Manual adjustment of working height Lhjdpfx Ahoxwvqdsbog Jointer: Total table length: 1810 mm Adjustable tables Cutter shaft noise suppression Cutter shaft guard Extraction port: 2x120 mm Tilting fence Supply voltage: 400 V Motor power: 5 kW Overall dimensions: Length: 2030 mm Width: 800 mm Height: 1160 mm