GA-Maschinen GmbH

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers - maintenance tools Gedpfx Aoy Rumysmusit - hardened pressure sheet

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication Gedpfx Amey Rummoujit – Additional safety guards – Working tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: Giodpoy Rumaefx Amuet – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication Gisdpfx Amoy Rulvoust – additional safety guards – operation tools – hardened pressure plate

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter Gjdpfjy Rulcex Amusit MAX. SHEET SIZE: 1800x2600 mm MAX. CUTTING SIZE: 1700x2500 mm MAX. CUTTING PRESSURE: 550 tons

Year of construction: 2006, condition: used, We offer this used Unigraphica Unicut 740 and S-74-3 Cross Cutter Unigraphica Unicut 740, year of manufacture 2006. Type: S-74-3 Version: S-74-3 Number: 006 Year of manufacture: 2007 Fuse: 16 A Rated current: 5.0 A Power consumption: 3.0 kW Power supply: 3 x 400/230 V 50/60 Hz Gijdpfxsy N Rcbo Amuet Formats: 7"-27" Format pitch: 1/6" and 1/8" Paper weight: 60-250 g/m2 Maximum paper width: 740 mm If you have any questions or need further information, please contact us.

Year of construction: 2020, condition: ready for operation (used), A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible. Gisdpfx Ajy Nnakomuot

Year of construction: 1981, condition: excellent (used), We offer this machine in very good condition: Bobst SP 102E Autoplaten, manufactured in 1981. Gjdpfx Amoy H Dl Deuoit Manufacturer: Bobst/Switzerland Model: SP 102E Autoplaten Year of Manufacture: 1981 Condition: Very good Stripping section Still in production Available from August 2026 The machine is still in production. Test runs are available. The main die-cutting machine in our print shop with a stripping section. Availability from August 2026. No intermediaries – directly from a Polish printing house! Price: 70,000 EUR EXW Negotiable.

Year of construction: 1990, operating hours: 21,834 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 059700605, Bobst SP 142-CER from 1990 for sale – Reason for sale: replacement investment made. The machine can be inspected in production. Dismantling and transport at buyer's expense. Giedpfx Asy Htxgsmuet

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, punching force: 1,000 t, operating speed: 93 mm/s, stroke length: 55 mm, table length: 1,100 mm, table width: 800 mm, machine/vehicle number: 100597, TECHNICAL DETAILS Press force: 10,000 kN Table surface (W x D): 1,100 x 800 mm Stroke range: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Puzzle thickness: up to 3 mm Format width (max.): 1,100 mm Punching speeds Upwards: 47.8 mm/s Downwards: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil fill: approx. 1,550 kg Automatic punching table Type: 355 Table top size (W x D x thickness): 1,000 x 700 x 10 mm Hardness: 62 HRC Surface finish: 7 MACHINE DETAILS Electrics Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Incoming line protection: 63 A Control voltage: 230/24 V Gsdpfx Aoy Ampdsmuoit Rated power: approx. 30 kW Protection class: IP 54 Power requirement: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Puzzle disassembler dimensions (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Weight of puzzle disassembler: approx. 1.8 t Noise level: < 70 dB(A)

Condition: used, Year of construction: 1985, used die-cutting press, year of manufacture 1985, size 82x112, equipped with pneumatic clutch Gedpfx Aeyx Hpvemusit

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Giodpfx Ajyxq Ucomust

Condition: used, 2025 generalüberholt Buchdruckzylinder / 2025 complete overhauld Letter Press Cylinder DIE Cutter Heidelberg SBB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBB Gedpfx Ameyuw S Eeueit >>2025 generalüberholt / 2025 complete overhauld

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal Giedeyuuzdepfx Amust • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Year of construction: 2002, condition: ready for operation (used), An Edelmann converted from a gravure printing machine into a rotary die-cutting machine is available. Principle: inline web processing with sheet stacking, materials: paper/cardboard/labels/die-cut parts, tool mounting: die-cutting plates, tool holder: magnetic cylinder, magnetic cylinder circumference: 24in, tool cassette: 12in, web width: 485mm, max. material width: 485mm, material weight range: 35-170g/m², max. roll diameter: 1200mm, max. production speed: 200m/min, production steps: roll-rotary die-cutting/cross-cutting/high-pile delivery. The machine ran little and is in as-new condition. Documentation available. An on-site inspection is possible. Gsdeyt N Dkjpfx Amueit

Condition: used, Elektrische Exzenterpresse / Electric Eccentric Press Komex Eccentric Die Cutting Machine Gijdpfx Asyt H Ndomujt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2014, operating hours: 35,000 h, functionality: fully functional, ETERNA 1620 SAL Extra ref 2950 year 2014 maximum sheet size: 1200 x 1620 mm material: Corrugated board Fala E, B, EB, BC vacuum feeder extended feeder with sheet alignment section – mechanical register cleaning section batch delivery Giedpoytum Rsfx Amust clamping force: 400 tons

Year of construction: 1979, condition: ready for operation (used), functionality: fully functional, Non-binding offer Automatic Die Cutting Machine Manufacturer: BOBST Autoplatine Model: SP-102 E Sheet Size: 1020 x 720 mm Year of Manufacture: 1979 Technical Data: - Max. Sheet Size: 1020 x 720 mm Godpjyrxyrsfx Amueit - Min. Sheet Size: 40 x 35 mm - Material Range: Paper/Cardboard: 80 – 1,000 g/m² Cardboard: 250 – 2,000 g/m² E+B flute: max. 4 mm - Max. Cutting Pressure: 250 t - Max. Production Speed: 7,500 sheets/h - Fully automatic die cutting machine with stripping station - Automatic high-pile feeder - High-pile delivery - Die cutting plates - Chase frames - Quick-action chase changing system - Complete with accessories - Machine in operating condition and well maintained - Video presentation available upon request! Price: on request Delivery: FCA Availability: immediately

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. Gijdpfxjymn Hws Amuet You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Condition: used, Automatic Platen Die Cutter Joh. Cietz PRESTO Halbautomatischer Stanztiegel / Automatic Platen Die Cutter Joh. Cietz PRESTO Gjdpeylqd Aefx Amusit Year 2008 - Serial-No. EP51568 Format 370 x 480mm Weight 1100kgs Included frame and tools Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2019, operating hours: 15 h, machine/vehicle number: MP.DBDO-00198, Size 75 x 106 cm, non-stop function in feeder and delivery, integrated fine adjustment of the cutting plate, motorized die-cutting pressure adjustment, simple operating concept. The basic model is already equipped with all functions and equipment required to start production. Short makeready times, high flexibility thanks to an extended range of materials, accommodates smaller die-cutting tools. Machine number: MP.DBDO-00198, Impressions: 15 million. Gisdpfx Ajyhn Uqemuot

Condition: used, Letter Press Cylinder DIE Cutter Heidelberg KSB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg KSB Year 1962 - Serial-No. KSB 308003 Papierformat / Size min. 125 x 150mm - max.: 400 x 570mm Druckgeschwindigkeit / Speed min. max. 5.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include fram Gijdpfsyfhthsx Amuot Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1984, condition: good (used), BOBST I 130 ER Automatic Die-Cutting Machine Year of manufacture: 1984 2. Sheet Formats Maximum sheet size: 920 x 1,300 mm Minimum sheet size: 450 x 580 mm Working format: – Max. 890 x 1,270 mm (open chase) – Max. 900 x 1,300 mm (closed chase) 3. Material Specifications Maximum board thickness: 1.5 mm (cardboard) Minimum grammage: 90 g/m² Gripper margin: 10 mm 4. Chase Sizes – 915 x 1,300 mm chase without bar – 840 x 1,300 mm chase with bar 5. Pile Heights (Non-Stop Operation) Feeder pile height: Max. 1,500 mm with pallet Delivery pile height: Max. 1,400 mm with pallet Maximum pallet size: 900 x 1,300 mm 6. Equipment and Features – Suitable for carton and paper processing – Not suitable for corrugated board – Stripping possible using stripping frame and separation grid – EMS side lay system for alignment according to printed marks Godpfjycv Dvox Amueit

Condition: used, Letter Press Zylidner DIE Cutter Johannisberg 104 Buchdruckzylinder / Letter Press Zylidner DIE Cutter Johannisberg 104 Gedpsycrz Dofx Amuoit Year 1966 - Serial-No. 2153801 Size min. 360 x 520mm - max. 720 x 1020mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Automatic Platen Die Cutter ETERNA ML 930 GII with 3 Operation modes Halbautomatischer Stanztiegel / Automatic Platen Die Cutter ETERNA ML 930 GII Year 2008 - Serial-No. EP51568 Format 670 x 930mm Operating modes: Single, Continuous nd with time delay on opening Electromagnetic clutch and brake Included frame and tools, in very good condition Giedpfx Aex U Adnomust Safty Cover Weight 3800kgs - Power supply 380 V Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test