EMTC Machinery

Condition: used, Year of construction: 1997, Technical details: pressure: 10 t Klelox Iu Ifehccqrsl workpiece diameter - max.: 50 mm threading length: 100 mm max. rollable pitch: 3 mm rolling power: 100 kN workpiece diameter min/max: 117/175 mm revolution per minute: 0 - 150 U/min Weight approx.: 2550 t dimensions of machine: 1,25 x 1,38 x 2,15 m *

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Klsljx H Rmujhccqrel Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, 2 Used Thread Rolling Machines WMW UPW25 Koljx Dmnyshccqrjll ---Only 10.000,00 Euro---

Condition: used, Thead Roller TLM RP8 TLM TORTONA Year: 1995 Kolhccqsx Aqprsrsll Diameter range: 3-8 mm Shaft length under head: 90 mm Max. thread length: 52 mm Dies size:130/115x54

Condition: good (used), Year of construction: 1998, functionality: fully functional, FOR SALE Thread rolling machines Escofier H20Z Kljlhsxv Dcxsccqrel

Condition: excellent (used), Year of construction: 2015, Roll pressure infinitely adjustable from 240 kN feeds - fine adjustment 0,5-45 mm/min turning speeds 0-80 U/min Swivel angle of the roller heads 11 ° Diameter of the roller spindles 69,85 mm Stroke - Roller screw slide 0-150 mm min. dist. - roller screws 138 mm max. dist. - roller screws 285 mm min. diameter - Rolling tools 230 mm max. diameter - Rolling tools 135 mm min. dia. 2 mm Klslhoxukrqjccqrel max. diameter 55 mm thread length at plunge operation 200 mm thread length at continiuous operation 2000 mm maximum thread pitch 4 mm total power requirement 14 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 2,5 x 1,9 m Rolling time continuously adjustable from: 0.1s Pause time continuously adjustable from: 0.1s Rolling spindle length: 200mm Machine bed height: 810mm Rolling spindle height above machine bed: 200 mm Height of support bearings: 115 mm Largest pitch for serrated teeth: 2.5 mm (up to 70 kg/mm2 Strength of the material)

Condition: used, TECHNICAL DETAILS - Min./max. diameter of workpieces : 2 / 18 [mm] - Max. thread : 2 [mm] - Max. plunge length : 40 [mm] - Power : 6 [t] - Min./max. diameters of the rollers : 70 / 100 [mm] - Standard cam travel : 5 [mm] WEIGHT & DIMENSIONS - Machine floor space : 775 x 555 [mm] Klslhccqjxbt Izsrel - Machine height : 1100 [mm] - Machine weight : 650 [kg]

Condition: used, TECHNICAL DETAILS - Min./max. diameter of workpieces : 2 / 40 [mm] - Max. thread : 5 [mm] - Maximum length in plunge : 54 [mm] - Power : 12 [t] WEIGHT & DIMENSIONS Kjlhsxbt Iuoccqrsll - Machine floor space : 2000 x 1750 [mm] - Machine weight : 2100 [kg]

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00049781, workpiece diameter (max.): 50 mm, spindle diameter: 69 mm, spindle speed (max.): 5,000 rpm, stroke length: 130 mm, roll spacing: 255 mm, TECHNICAL DETAILS Contact surface: 180 mm Workpiece diameter: 4 - 50 mm Rolling pressure (infinitely variable): 0-200 kN Feed (infinitely variable): 0-50 mm/s Rolling cycles per minute: 0-86 Rolling spindles Rolling spindle diameter: 69.85 mm Distance between rolling spindles: 125 - 255 mm Spindle mounting length: 160 mm Traverse of the rolling spindle slide: 130 mm Rolling spindle speed: 3000-5000 rpm Rolling tool diameter: 130 - 200 mm Machine bed height: 800 mm Height of rolling spindle above machine bed: 160 mm MACHINE DETAILS Control system: SIEMENS SIMATIC C7 Voltage: 400 V, 50 Hz Kolhccqexbfwzsroll Dimensions & Weight Machine height: 1,600 mm Weight: 2,400 kg

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M24I/9053, Offer Number: M24I/9053 Machinetype: thread rolling machine - 2 rolls Make: BAD DÜBEN Type: PRX 32 E CNC Constr. year: 2002 diameter range: 10-24 mm Forging power: 7-20 to thread length plunge method: 195 mm daylight: 160 mm Klolow Nxnwohccqrjl max. pitch: 3,5 mm roller bore: 80 mm roller width: 235 mm roller length: 195 mm rpm: 40 - 315 Location: Germany

Condition: used, Year of construction: 2007, pressure 20 - 300 kN adjustment of rolling slide 50 mm diameter of rolling spindle 120 mm roll spindle height over machine bed 200 mm Control SIN 840 D taper length of the roll spindle 200 mm Klslhccsw E Nmksqrsl rolling spindle turning speeds 0 - 50 1/min torque per rolling spindle 2700 Nm power capacity 2 x 8,4 kW distance between rolling spindles min. 271 / max. 368 mm rolling tool outer diameter max. 300 mm total power requirement 26 kW weight of the machine ca. 7,1 t dimensions of the machine ca. 9,70 x 4,50 x 3,80 m CNC machine for gear cold rolling / thread rolling Hydraulic rolling process Felsomat loader cell Complete housing

Condition: used, Year of construction: 1988, Technical details: pressure: 10 t workpiece diameter - max.: 40 mm threading length: 70-80 mm workpiece diameter min/max: 3 / 40 mm Ksljw D Aq Tjhccqroll revolution per minute: 47-94 U/min feed speed: 0,5 - 6 mm/s work stroke: max. 7 mm total power requirement: 4,68 kW Weight approx.: 1,4 t dimensions of machine: 1,4 x 1,4 x 1,7 B T H m dimensions of hydaulic: 0,8 x 1,2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40mm min. thread diameter 3mm up to 3.5 mm pitch max. pitch 1.75mm roller width min. 80 mm max. 120mm shaft speed 47-94 roller shaft diameter 40 various rollers as accessories *

Condition: refurbished (used), Thread rolling machine ORT RP18 B 2-roll overhauled Kjlhccqjwwmiyjrjll LOW PRICE The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Number of rollers: 2

Condition: used, Year of construction: 1997, machine/vehicle number: 707, Ingramatic thread rolling machine RP21 RV, year 97, used Kljlhewiu Afjccqrsl

Condition: used, Year of construction: 2007, Manufacturer: ORT Model: RP18 Year : 2007 Maximum rolling thrust 18 Ton Roller shaft diameter 54 mm Roller shaft key 12 mm Minimum diameter workpiece to rolled 3 mm Maximum diameter workpiece to be rolled 60 mm Kolhcev Tqdbscqrsll Max.length workpiece rolled in plunge-feed 175 mm Max.length workpiece to rolled in enfilade — Maximum Pitch workpiece to be rolled 4 mm Maximum roller diameter 185 mm Main motor power 7,5 HP Total installed power 11 HP Maximum noise level 80 db Net weight 1800 kg Height Rolling shaft from the floor 1035 mm Machine width 1450 mm Standard machine depth 900 mm Total machine height 1800 mm

Condition: new, Year of construction: 2025, functionality: fully functional, thread length: 12,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 90 mm, spindle diameter: 80 mm, type of input current: three-phase, roll diameter: 250 mm, spindle speed (max.): 50 rpm, spindle speed (min.): 20 rpm, total height: 2,000 mm, total length: 2,400 mm, total width: 2,000 mm, 60 ton hydraulic thread rolling machine with swivel spindles for infeed and thru-feed rolling Klslev Rb Apehccqrel Download PDF file for photographs

Condition: ready for operation (used), Year of construction: 1995, BAD DUBEN Model PRX 32 E - CNC Used - in excellent condition Bad Duben: 2 The Cylindrical Thread Roller Klslhccqev Imqyjrel Brand: BAD DUBEN Model: PRX 32 E - CNC Type: Threading Machines, Thread Rollers, Cylindrical Die Condition: Used, good condition Serial no.: 17 Year: 1995 Max rolling pressure: 16 T Workpiece diameter: 6 - 24 mm. Thread Length: 200mm. Roller diameter: 195 mm. Max pitch: 3mm. Speed Range of roller splindles: 40-315 Diam: 210 mm. Weight: 4,500 kg. Visible c/o H.B.R. srl - Calolziocorte (LC) - Italy

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Kolhjvyyyxjccqrell Pitch 6mm max Grooving pitch 2.25mm max Roller width 160mm max Ø Roller 133mm min; 170mm max Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Distance between shafts 135mm min; 230mm max Working stroke 15min max Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg

Condition: refurbished (used), Thread rolling machine ORT RP18 B 2-roll overhauled See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Kolhovxa Dboccqrell Power (Ton): 18 Number of rollers: 2

Condition: excellent (used), pressure 0,5 - 20 t max. workpiece diameter 5 - 75 mm threading length 2000 mm pitch in mm 8 mm diameter of roll spindle taper 69,85 tool diameter 200 mm roll spindle turning speed range 20 - 90 U/min stroke 0 - 20 mm total power requirement 7,5 kW weight of the machine ca. 3,1 t Kolhccqovpaa Rjroll dimensions of the machine ca. 1,9 x 1,1 x 1,2 m

Condition: good (used), Year of construction: 1973, pressure 0,5 - 10 t max. workpiece diameter 2 - 50 mm threading length 2000 mm pitch in mm 3 mm diameter of roll spindle taper 54 tool diameter 145 mm Klelhccsvpaaksqrsl roll spindle turning speed range 41 - 129 U/min stroke 0 - 8 mm total power requirement 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3 x 1,2 x 1,2 m

Condition: used, Thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, thread rolling head, rolling head Kolhccqsu Tyvhorjll -Manufacturer:BWF, thread rolling head -Type: RK 12-20 -Thread rollers: M24 x 1.5 -Dimensions: Ø 120 x 180 mm -Weight: 5.6 kg

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Kslhceuz If Njcqrell Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: refurbished (used), Year of construction: 2009, ORT RP30 MS 2-roll 30 tons Kljlhjuykz Doccqrjl thread rolling, knurling, small gears 2009 = YOM Electronic overhaul and electronic retrofit with Siemens PLC (2025) The machine is visible working in our warehouse in Gussago BS. Possibility of proof M i m u Machine Tools Power (Ton): 30 Number of rollers: 2 PLC: Yes

Condition: used, ORT RP18B overhauled Kleleuua H Rjhccqrol