BECHINGER GmbH

Year of construction: 2024, operating hours: 150 h, condition: used, functionality: fully functional, This stone separator can be used to remove rolling materials. Its primary application is for stone removal in compost, biomass, and screening overflow processing, where large quantities of stones can be separated. The best results can be achieved when used with a defined medium grain fraction (e.g., 40-80 mm). A magnetic deflector roller is installed for the separation of iron parts. The material is collected under the machine via the metal slide and can be caught in a hopper. Dodpfezk Izzsx Akkeuw Throughput: up to 50 tons per hour (i.e., approximately 100 tons/hour input for a screening machine, since only one fraction is being processed). Power connection: 16A CEE 5-pole three-phase plug. Weight: ~1.8 tons Dimensions: ~5m length; ~2m width Transport: Chain hoist with 4 crane eyes OR forklift attachment Adjustment: Conveyor belt speed via frequency inverter; inclination via crank. This is our demonstration machine, which is in used but very good condition. The installed suction hood and pressure nozzle can be purchased together to operate the stone separator in conjunction with an air classifier. This allows even light contaminants, such as plastic films, Styrofoam, etc., to be removed. In combination with the TUKWIND PRO 18 air classifier (separate listing), you have a complete solution for contaminant removal.

Year of construction: 2017, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, The IFE SORT is a density sorting machine based on the fluidized bed system for fine, dry bulk materials. The function of this air separation table is based on a combination of vibration and air technology. Heavy components are conveyed upwards by vibration, while lighter components are suspended by injected air and consequently float downwards. The application areas include recycling and secondary raw material processing, as well as the wood, food, and mining industries. Standard version: consists of a basic unit with a perforated plate insert driven by two eccentric motors and a fan with a motor. Nominal width: 1000 mm Capacity: up to 3 tons/hour in recycling – however, this is highly dependent on the density and size of the material being processed. Easy adjustment: of impact angle, oscillation amplitude, inclination, speeds, etc. Design: dust-proof Control cabinet: in an IP 55 housing with a frequency converter for motors and fan, included as standard. Dsdpfx Akezkvaxokouw The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 2017, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, The IFE SORT is a density sorting machine based on the fluidized bed system for fine, dry bulk materials. The function of this air separation table is based on a combination of vibration and air technology. Heavy components are conveyed upwards by vibration, while lighter components are kept suspended by injected air and consequently float downwards. The application areas include recycling and secondary raw material processing, as well as the wood industry, the food industry, and mining. Standard version: consists of a basic unit with a perforated plate insert driven by two eccentric motors and a fan with motor. Nominal width: 650 mm Capacity: up to 3 tons/hour in recycling – however, highly dependent on the density and size of the material being processed. Easy adjustability: of impact angle, oscillation width, inclination, speeds, etc. Design: dust-tight Control cabinet: in an IP 55 enclosure with a frequency converter for motors and fan, included as standard. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in the Netherlands. Djdpfx Akozkup Eokjuw The details for optimal transport need to be clarified. The machine price is without packaging on a pallet.

Year of construction: 2025, operating hours: 100 h, condition: used, functionality: fully functional, overall weight: 9,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0403, EDDY CENTRIC combines an iron and non-ferrous metal separator and offers an efficient and compact way to separate metals from a material stream at the highest throughput rates. A combination of a robust and powerful drum magnet separator for separating ferrous metals (nails, screws, etc.) and a centric eddy current separator for separating non-ferrous metals (aluminum, copper, brass, etc.) allows for the production of three marketable fractions in a single processing step. Duodjzfy R Dspfx Akkjw This module is part of our rental fleet.

Condition: refurbished (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: NE100230E50133, protection type (IP code): IP55, overall weight: 2,100 kg, input voltage: 400 V, belt width: 950 mm, STEINERT NE 100 220 E50 Eddy Current Separator | Non-Ferrous Metal Separator | Fully Refurbished For sale: a STEINERT eddy current / non-ferrous metal separator, type NE 100 220 E50, used for recovering non-ferrous metals (aluminum, copper, brass, etc.) from bulk material streams such as shredder residue, Zorba/shredder NE-mix, slag, or similar feedstocks. The unit has been fully refurbished – new conveyor belt, new control system – and is in excellent, ready-to-run condition (see photos). Solid steel frame base, compact footprint, available immediately. Technical data: Manufacturer: STEINERT Elektromagnetbau Type: NE 100 220 E50 Feed width: 950 mm Belt speed: 0.5–2.0 m/s (mechanically adjustable via handwheel) Belt drum drive: 2.2 kW, IP 55 (variable gearbox IP 44) Magnet system drive: 4.0 kW, IP 55 Magnet system: fixed field frequency, adjustable up to 45° Particle size range: 5–140 mm (version E5013: 5–100 mm / E5005: 25–140 mm) Rated throughput (datasheet): approx. 10 m³/h Field-tested throughput: Zorba / shredder NE-mix 20–100 mm: approx. 5–8 t/h light, loose material: approx. 3–6 t/h heavy, uniform material: approx. 8–12 t/h Protection class (overall unit): IP 55 Permissible ambient temperature: -10 °C to +35 °C Djdpfxszd Srwo Akksuw Total weight: approx. 2,100 kg Condition: fully refurbished – new belt, new control system

Year of construction: 2013, condition: good (used), functionality: fully functional, We offer a sorting system consisting of: - Screening drum - Inclined belt conveyor - Conveyor belt - Sorting belt with 6 sorting stations - Hopper The system needs to be dismantled. It was only in operation for a short period. For sale via bidding. If you have any further questions, please do not hesitate to contact us. For sale via bidding. Sold as is, without warranty, guarantee, conformity or manufacturer's declaration. Dusdpfozdq Uwex Akkjw

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Dujdpfx Aoy Urtfokkew Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2022, operating hours: 2,500 h, condition: like new (used), functionality: fully functional, Waste Recovery and Sorting Line – Year 2022 Complete line for the recovery and sorting of municipal and industrial waste, manufactured and installed in 2022, with very few operating hours and in very good overall condition. The installation is equipped with leading European brands, including: • PICVISA – ECOPACK EP-2000 and EP-1500 optical separators • NIHOT – WSF 800 and SDS 800 air density separation systems • SPALECK – Vibratory screen • GUNTER – SPLITTER UNIT 425 screening and separation • SPR – 1-rotor Pre-crusher shredder • FELEMAMG – Magnetic and inductive separators • ATLAS COPCO – GA37 VSD FF compressor • Large number of conveyor belts and feeding/storage silos Approximate operating hours range from 1,000 to 2,500 per unit, with the majority of components maintaining excellent operational condition. The facility can be purchased: • As a complete line, • As separate sections, • As individual units. Duodpfx Akey Snntsksw This is a modern facility, equipped with high-performance optical sorting and air density separation technology, specifically suited for: • MSW (Municipal Solid Waste), • Packaging, • RDF/SRF, • Plastics, • Film, • Paper, and light waste recovery.

Condition: excellent (used), X-ray sorting system. Manufacturer: TITECH TOMRA Model: X-TRACT 1200 Year: 2012 The machine is in very good condition. Complete machine overhaul carried out. Source renewed: €35,000 All sensors replaced: €29,000 Belt replaced. Areas of application: - Metal sorting - Sorting of wood, production of refuse-derived fuels (RDF) - Sorting of organic waste Duodpfsy Ra D Rex Akkow

Condition: used, functionality: fully functional, machine/vehicle number: 2014, operating hours: 1,640 h, MAKE: MENART MODEL: 1032 MTRA Dusdpfx Asy Iwb Iokksw YEAR: 2014 HOURS: 161750 EXTRAS: Diesel 326 HP SERIAL NO.: REGISTRATION NO.: 26-01.75-1

Year of construction: 2014, condition: used, We are offering this used IFE Aufbereitungstechnik GmbH MPQ 750 overband magnetic separator, year of manufacture 2014. Duedpfsyxrpnex Akkow If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale are three optical sorters from Bühler. They are currently still integrated into our production and can be inspected on site. The relocation is scheduled for around the end of August 2026. Dujdjyrndajpfx Akkow All technical data can be found in the pictures. If you have any further questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Details of the VS BIG (Two-Deck): • Top deck: 130 x 130 mm screen mesh • Bottom deck: 90 x 90 mm screen mesh • Fixed metal brake (instead of rubber brake) • 400V power connection Conveyor Belt CB 3000: • Without standard frame with wheels • Fixed frame at the bottom Duedpsyirx Njfx Akkew This setup allows for efficient and precise screening directly on-site!

Year of construction: 2000, condition: new, Separation screen ALLGAIER ARSM 31-2, suitable for screening, separation, and recycling. Duedpfxjx Hh H Ee Akksw

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, Overband Magnet Type UB 600 Operating voltage 3x400 V Frequency 50 Hz Rated operating current 5 A Operating speed 30 – 90 rpm Maximum sound pressure level 50 dB Machine weight 750 kg Location: Austria Available immediately Duodpfjxy Hl Dsx Akkew

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 32 h, functionality: fully functional, conveyor belt length: 2,000 mm, conveyor belt width: 400 mm, conveyor belt speed: 4,000 mm/s, total width: 1,060 mm, total height: 1,800 mm, overall weight: 350 kg, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 10 A, Equipment: documentation/manual, emergency stop, Inside width: 400 mm Djdjxuq Dgopfx Akkouw Length: 2000 mm Driving power: 3 kW Operating voltage: 3 x 400 V AC + PEN, 50 Hz

Year of construction: 2022, operating hours: 975 h, condition: used, functionality: fully functional, overall weight: 9,600 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0501, The MAGNETIC DRUM consists of a two-stage drum magnetic separation system designed to remove all magnetic particles from a material stream. Because the intensity of both magnetic drums can be selected and each drum can be activated or deactivated as needed, this module is highly flexible and can always be adapted to the specific properties of the feed material. The dual magnetic separation enables higher purity levels while maintaining constant throughput. This module is part of our rental fleet. Dodpfx Aoxt Dqqjkkouw

Year of construction: 2023, operating hours: 514 h, condition: used, functionality: fully functional, overall weight: 7,900 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0602, SORT FLUID is a dry sink-float sorting system with an integrated dosing bunker. This replaces conventional wet sink-float sorting and eliminates the need for liquids entirely. Through an innovative combination of airflow, a special bed material, and gravity, the metals are sorted according to their average particle density. This enables separation of light and heavy metals with a high purity of up to > 99%. This module is part of our rental fleet. Dusdpextb A Dsfx Akkjw

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: VARIOSORT+ WEEE CM 1920, For sale is the VARIOSORT+ WEEE CM 1920 sorting system from Sesotec. This machine is perfectly suited for sorting out off-colour materials, metal contaminants, and foreign plastics. The unit is stored in a dry/heated hall and has never been in operation. We have the identical machine in use, so a demonstration of its sorting performance can be arranged upon request. Dodpfx Akoxryarokjuw Further details and inspection available on request.

Condition: new, functionality: fully functional, Year of construction: 2025, Bucket Screen buckets for screening all loose materials. 8mm and 16mm sizes of screened fractions, both of which are already included in the price of the bucket. HARDOX as standard on the most used parts of the bucket. ANTISTICK the non-stick surface of part of the bucket, for faster and easier work. Various sizes, 2,3,4,5 or 6 shaft buckets Duedpsxpg Tgjfx Akksw

Condition: new, functionality: fully functional, overall weight: 1,300 kg, Year of construction: 2025, Mobile vibrating screener on a trailer of category O2, can be supplied with lifting chains and a petrol generator. Very easy to use. Quick change of meshes. Built-in conveyor for fine fraction. Duodpfxjxpg I Ro Akkew

Condition: new, functionality: fully functional, overall weight: 580 kg, Year of construction: 2025, Single deck vibrating screener, option to purchase with extended front panels, lifting chains and petrol generator. The machine is delivered on a transport pallet. Change from transport to work position within minutes. Low operating costs. Very easy to transport. Djdpfxexpg Ikj Akkeuw

Condition: new, functionality: fully functional, overall weight: 650 kg, Year of construction: 2025, Compact dimensions and easy exchange of meshes. Great performance. For easy handling, it can be moved with lifting chains or by using a forklift. Duedoxpg Epspfx Akkjw The meshes are made of high-quality spring steel. The high-strength steel construction ensures maximum stability.

Condition: new, functionality: fully functional, overall weight: 2,800 kg, Year of construction: 2025, Double deck screener on its own O2 category chassis for easy transport. Change from transport to work position within minutes. Diesel aggregate. Djdpfxjxpgytj Akksuw

Condition: new, functionality: fully functional, operation weight: 175 kg, Year of construction: 2025, DB15 - one mesh screener running on 230V, easy to operate, and transport. Weight 175kg. Pull out handle and wheels for easy handling. Mesh mounted of any size from 2mm to 80mm. Dodpfxsxn Sfls Akksuw