Machinesup Inhaber: Peggy Griesbach

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm,

Condition: excellent (used), Year of construction: 1989, Jung JF 520 Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, mechanically overhauled, very good original condition. Gsdpfxsz Agz Rs Aciskb The machine comes from the technical department of a renowned German die-casting company. Technical data: Year of manufacture 1989 / 2019 Technical data Clamping area (L x W in mm) 600 x 200 Oversize grinding area (L x W in mm) 600 x 250 Magnet size max. mm 500 x 200 Grinding wheel dimensions max. mm 225 (250) x 25 x 51 Distance table/spindle center mm Max. 400 Table longitudinal feed, oscillating m/min 1 – 20 Creep feed mm/min 0 – 500 Grinding spindle drive, speed rpm 800 – 4200 Power kW (with creep feed) 1.6 – 2.2 Machine weight approx.: 2.0 t Accessories and equipment: Magnet Coolant system Machine feet Grinding wheel About the machine: We offer a Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, in very good condition. The machine is, of course, fully functional and has approximately 250 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinding machines is very user-friendly, and surfaces with a low Ra value can be produced. Take advantage of the opportunity to inspect this machine on site under power and see for yourself the condition of the machine. Video: Jung JF 520 You can find more surface grinding machines from well-known manufacturers on our website.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (max.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum bar capacity: 32 mm Maximum bar feed: 125 mm Maximum turning length: 80 mm Maximum drilling depth: 80 mm Spindle speed for turning: 200–3,150 rpm Spindle speed for right-hand thread cutting: 11.2–1,575 rpm MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Required space: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Gksdpjz Agz Djfx Acisb Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, please see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle circle diameter: 300 mm Bar feed normal/special up to: 125 / 290 mm Longitudinal slide travel, standard, total/work stroke: 100 / 80 mm Longitudinal slide travel, special, total/work stroke: 145 / 115 mm Gksdpfx Acez Agzqoiob Cross slide travel, upper slide, total/work stroke: 50 / 33 mm Cross slide travel, middle slide, total/work stroke: 50 / 30 mm Cross slide travel, lower slide, total/work stroke: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per operation, standard: 60–425 Workpiece revolutions per operation, shortened: 33.5–236 Workpiece revolutions per operation, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor rated power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space requirement for packed machine: 15 m³ EQUIPMENT Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Gedez Agzdopfx Acijkb Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: used, mileage: 783,829 km, power: 427 kW (580.56 HP), first registration: 01/2018, tire size: 385/65 R22.5, axle configuration: 4x2, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2018, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, retarder, second fuel tank, soot filter, spoiler, = Additional Options and Accessories = - Roof spoiler - Hydraulic tipper kit - Aluminum fuel tank - Alloy wheels - Particle filter - Headlights - Side sills - Standard air conditioning - vehicles.accessories.jumbo - Visor - Alternating current - Toolbox Gkedpoz Agy Tofx Aciob - Central lubrication system = Further Information = Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65 R22.5; Alloy rims; Steered; Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Rear axle: Tire size: 315/80 R22.5; Double tires; Alloy rims; Tire tread depth left inner: 8 mm; Tire tread depth left outer: 8 mm; Tire tread depth right inner: 8 mm; Tire tread depth right outer: 8 mm Damage: None

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, spindle speed (max.): 3,750 rpm, bar diameter (max.): 26 mm, overall weight: 6,800 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For further Schütte multi-spindle machines for sale from the same location, see below! TECHNICAL DETAILS Bar diameter round: 26 mm Bar diameter square: 19 mm Bar diameter hexagonal: 22 mm Bar diameter octagonal: 24 mm Spindle circle diameter: 270 mm Standard bar feed: 125 mm Special bar feed: 290 mm Longitudinal slide travel, standard total: 80 mm Longitudinal slide travel, standard working length: 63 mm Longitudinal slide travel, special total: 125 mm Longitudinal slide travel, special working length: 98 mm Cross slide travel, upper slide total: 40 mm Cross slide travel, upper slide working length: 25 mm Cross slide travel, middle slide total: 40 mm Cross slide travel, middle slide working length: 25 mm Cross slide travel, lower slide total: 50 mm Cross slide travel, lower slide working length: 31 mm Number of spindle speeds: 49 Spindle speed range I: 530–3,750 rpm Spindle speed range II: 236–1,700 rpm Workpiece revolutions per working cycle, standard: 60–425 Workpiece revolutions per working cycle, short: 33.5–236 Workpiece revolutions per working cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Rated drive motor power: 18.5 kW Drive motor speed: 1,500 rpm Gksdpfxsz Agy Hj Aciob Dimensions & Weight Dimensions with control cabinet (L x W): 3,500 x 1,450 mm Length with bar guide: 6,470 mm Machine weight: 6,800 kg Space requirement for packed machine: 14 m³

Condition: used, mileage: 1,044,233 km, power: 456 kW (619.99 HP), first registration: 11/2012, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, Year of construction: 2012, Equipment: ABS, central locking, cruise control, electric window regulation, parking heater, power mirror, retarder, second fuel tank, soot filter, spoiler, = Additional Options and Accessories = - Roof spoiler Gedpfsz Agyyox Aciekb - Aluminum fuel tank - Engine brake - Low deck - Particle filter - Headlights - Visor - Alternating current = Additional Information = Brakes: Disc brakes Front axle: Tire size: 385/65 R22.5; Steerable; Tire tread depth left: 9.4 mm; Tire tread depth right: 9.4 mm Rear axle 1: Tire size: 385/65 R22.5; Lift axle; Tire tread depth left: 5.7 mm; Tire tread depth right: 8.8 mm Rear axle 2: Tire size: 315/80 R22.5; Dual tires; Tire tread depth left inner: 6 mm; Tire tread depth left outer: 5.4 mm; Tire tread depth right inner: 8.8 mm; Tire tread depth right outer: 5.6 mm Unladen weight: 9,050 kg Payload: 16,950 kg GVW: 26,000 kg Damage: None

Condition: used, Year of construction: 2015, operating hours: 7,570 h, lifting height: 9,800 mm, free lift: 3,330 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, total height: 3,900 mm, total length: 1,800 mm, total width: 1,270 mm, color: blue, Empty weight: 4.317 kg Lifting capacity: 1.700 kg - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 511903F00536 - Operating hours: 7570 - Lifting capacity: 1700kg - Lifting height: 9800mm - Overhead clearance: 3900mm - Free lift: 3330mm - Fork length: 1200mm - Attachment: Side-shift - Options: Joystick, Free-lift - Mast: Triplex - Drive: Electric - Driving direction: 2 Road - Battery information: - └ Brand/Type: 5 PzS 775 - └ Battery year of construction: 2018 - └ Capacity: 775Ah - └ Battery voltage: 48V - └ Tray length [mm]: 1220 - └ Tray width [mm]: 425 - └ Tray height [mm]: 780 Gsdpfx Acsz Agytsiekb - Transport dimensions: 1800mm x 1270mm x 3900mm (l x w x h) - Transport weight [kg]: 4317kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2021, operating hours: 4,846 h, lifting height: 2,950 mm, fuel type: electric, mast type: duplex, fork length: 1,150 mm, total height: 1,920 mm, total length: 2,400 mm, total width: 800 mm, color: grey, Empty weight: 1.905 kg Lifting capacity: 1.600 kg - Year: 2021 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: F20329Y00152 Gjdpez Agymofx Aciokb - Operating hours: 4846 - Type: Stand up stacker - Lifting capacity: 1600kg - Lifting height: 2950mm - Overhead clearance: 1920mm - Free lift: 0mm - Fork length: 1150mm - Fork width: 560mm - Mast: Duplex - Inspection valid until: 04.2026 - Drive: Electric - Battery information: - └ Brand/Type: Still - └ Battery year of construction: 2021 - └ Capacity: 375Ah - └ Battery voltage: 24V - Transport dimensions: 2400mm x 800mm x 1920mm (l x w x h) - Transport weight [kg]: 1905kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, mileage: 318,073 km, power: 368 kW (500.34 HP), first registration: 09/2023, fuel type: diesel, overall weight: 8,287 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Cruise Control: I-See. Map based topography information. Globetrotter XL Cab, extra high sleeper. Single energy battery system (2 batteries). D13K500 diesel engine, 500hp, 2500Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor. Comfortable, suspended driver seat with belt. Comfortable suspended Passenger seat with seatbelt mounted in seat. Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Aux. cab heater: 1.8kW Air to air. 33 litre under bunk mounted fridge / freezer with dividers. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres - 315/60 R22.5. Gkodpfx Acoz Agygoisb Rear tyres - 315/60 R22.5. SAF-Holland/+GF+ SK-S 36.20 cast fixed fifth wheel. Wheelbase 3800 mm. 650 litre, left side fuel tank with steps. 65 litre AdBlue tank under/behind cab. 610 litre, right side fueltank. Speed limiter setting 90 km/h - 56mph. Technology Secondary colour information display. FMS gateway for Fleet Management System. Exterior LED headlamps. Static corner lights - works with indicator at low speed to light up direction. Front fog lights - white. Tyres Information Front left - 12 mm Front right - 12 mm Rear left inner - 9 mm Rear left outer - 9 mm Rear right inner - 9 mm Rear right outer - 9 mm

Condition: good (used), functionality: fully functional, 1 x multi-spindle automatic lathe Traub TD 26 with boring unit + tool magazine Iemca AS 325/32 CT Year of manufacture: 1992 + chip conveyor Gkodpfez Agyajx Acisb The machine can be inspected while powered on.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2008, loading space length: 13,640 mm, loading space width: 2,470 mm, loading space height: 2,690 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,010 mm, color: white, Year of construction: 2008, Equipment: tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Weights Empty weight: 7.700 kg Carrying capacity: 34.300 kg Gjdpez Agx Ajfx Aciskb GVW: 42.000 kg Functional Tail lift: Dhollandia DHSSUR11, slider lift, 2500 kg Make of bodywork: Schmitz CargoBull Plywood Box History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 269.7 kW (366.69 HP), type of input current: three-phase, type of cooling: air, overall weight: 743 kg, input voltage: 400 V, total width: 1,100 mm, total length: 4,250 mm, total height: 1,590 mm, warranty duration: 12 months, Dry-cooler AERMEC WTR 8043BTD 269.7 KW Gkodpfez Agxvsx Acijb Cooling capacity: 269.7 kW (40/35 - 25°C) Year of manufacture: 2023 Fluid: Glycol + Water Number of fans: 4 pcs. Fan Diameter: 800 mm Volume: 80 dm³ External surface: 630.5 m² Dimensions: 4.25 x 1.1 x 1.59 m. Weight: 743 kg. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Gkodpfx Acoz Agw Esieb Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: good (used), Pipe transport trolley, gas cylinder trolley, gas cylinder cart, steel cylinder cart, transport trolley -Manufacturer: Sumner Manufacturing, pipe transport trolley Godoz Agwlspfx Acijkb -Tires: Tubular tires -External dimensions: 1730/665/H680mm -Weight: 31 kg

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Gkodpfjz Agv Uox Acieb Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 2002, functionality: fully functional, working width: 950 mm, overall weight: 1,000 kg, grinding height: 150 mm, height adjustment type: electric, type of input current: three-phase, grinding belt length: 1,900 mm, SCM Sandya 3 RCS 95 wide belt sander Working width: 950 mm Number of sanding units: 2 1 unit with a steel roller 2 combination unit – rubber roller + backing pad Gjdpfoz Agvzex Aciokb Backing pad is automatically adjusted Oscillation controlled by photoelectric sensors 2 belt speeds Motor power: 11 kW Abrasive sheet dimensions: 1900 x 970 mm

Condition: excellent (used), functionality: fully functional, Working width: 800 mm Gksdpfx Aoz Agvhecieb Maximum element height: 100 mm Manual adjustment of roller spacing Simultaneous application of adhesive to the top and bottom surfaces

Condition: ready for operation (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, Equipment: compressor, documentation/manual, The Morgana Major folder is a compact, high-performance folder with two fold plates. It is designed for short-run digital and commercial print shops. Built for reliable, easy-to-use folding of brochures, leaflets and booklets, it offers quick job changes and consistent fold quality for mixed media. Its simple setup and robust air feeding system make it a best choice for finishing departments seeking speed and repeatable results. Maximum sheet size: 648mm x 365mm Gksdpfxez Agvbe Acisb Minimum sheet size 148mm x 140mm Maximum paper weight 240 gsm Minimum paper weight 56 gsm Load capacity 500 sheets 80 gsm Speed up to 27.000 A4 sheets per hour

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Arestant Type: AS Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: orange Box profile: 100 x 40 mm Agraffe: 4 HK (hooks) Clear width: 2,705 mm Max. load per crossbeam pair: 2,000 kg, with evenly distributed load. (Note the field load) 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting out Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Gkjdpfxoz Agu Ro Aciob General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 1982, Planing width: 500 mm Table length: 2840 mm Cutterhead speed: approx. 5000 rpm Adjustability of the fence: 0 - 45° Gksdpfxsz Agu De Acijb Motor power: 5.5 kW Dust extraction port: 160 mm Machine weight: approx. 950 kg including: toothed table lips console for feed hydraulic adjustment of the planing table NEW planer guard

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 2,974 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,318 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, motor manufacturer: ELECTRIC, gearing type: hydrostat, battery capacity: 930 Ah, remaining battery capacity: 95 %, battery voltage: 48 V, fork carriage width: 1,400 mm, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 45 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 559 / 254 - 406, overall weight: 9,420 kg, empty load weight: 6,920 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, # COMBILIFT CBE2500 | ELECTRIC | TRIPLEX 4900 MM | FREE LIFT | FORK POSITIONER | FULL CAB | READY TO WORK ## ✅ FULLY SERVICED | WARRANTY | WORLDWIDE DELIVERY Are you looking for a forklift that starts generating value from day one, rather than creating unexpected maintenance costs? The COMBILIFT CBE2500 is fully serviced, thoroughly inspected, and ready for immediate operation. Whether you work in manufacturing, warehousing, steel processing, or timber handling, this machine is prepared to perform from the moment it arrives. --- ## ⭐ Key Advantages ✔ Fully serviced before delivery ✔ Start-up warranty included ✔ Brand-new super elastic tires ✔ Excellent mechanical and cosmetic condition ✔ Ready to work with no additional investment required ✔ Live online video inspection available ✔ Direct delivery to your facility anywhere in the world --- # 📋 Technical Specifications 🏭 Manufacturer: COMBILIFT 📌 Model: CBE2500 📅 Year of Manufacture: 2018 ⚡ Power Type: Electric 🏋️ Load Capacity: 2,500 kg ⏱ Operating Hours: 2,974 h ⬆️ Mast: Triplex 📏 Lift Height: 4,900 mm ↔️ Fork Positioner: 1,400 mm 📐 Fork Length: 1,150 mm 🚜 Cab: Fully Enclosed & Heated Gksdpsz Aguqjfx Acieb ⚖️ Operating Weight: 6,920 kg --- # 📐 Dimensions 📏 Overall Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,500 mm 📏 Lowered Mast Height: 2,250 mm --- # 🛞 Tires Front: 16 x 7 x 10 1/2 Rear: 559 / 254 - 406 ✅ Condition: 100% Brand New --- # 🔧 Equipment ✅ Fork Positioner ✅ Side Shift ✅ Free Lift ✅ Fully Enclosed Heated Cab ✅ Working Lights --- # 🏭 Ideal Applications 🌲 Timber Industry 🏗 Steel Mills & Steel Service Centers 🏭 Structural Steel Manufacturers 📦 Handling Pipes, Profiles & Long Materials 🏢 Indoor & Outdoor Operations --- # 🌍 Why Choose FT LOGISTICS? When you buy from FT LOGISTICS, you are purchasing from a company specializing exclusively in: ✔ Forklifts ✔ Sideloaders ✔ Multidirectional Forklifts ✔ Warehouse Equipment Every machine undergoes a comprehensive technical inspection, professional servicing, and operational testing before delivery. We maintain an inventory of 100+ machines available for immediate shipment and deliver equipment to customers throughout: 🌍 Europe 🌎 South America 🌍 Africa 🌏 Asia 🌍 Middle East --- # 🤝 What We Offer 🔧 Complete Pre-Delivery Service 🛡 Warranty 👨‍🔧 Professional Technical Advice 💳 Leasing & Financing Solutions 🚛 Worldwide Transport 📄 Export Documentation & Customs Clearance 🤝 After-Sales Support --- # 📹 Need More Information? We can provide: 🎥 Live Online Machine Demonstration 📷 Additional High-Resolution Photos 🎬 Detailed Videos 📋 Customized Transport Quotation 🌍 Worldwide Shipping Solutions --- ## ⭐ Why Our Customers Choose Us Hundreds of companies across Europe and worldwide trust FT LOGISTICS for reliable, work-ready equipment. Our customers return because they know they receive professionally prepared machines backed by expert support and international logistics experience. --- # FT LOGISTICS ### 🚛 We Deliver Machines Ready to Work. Professional Forklifts | Sideloaders | Multidirectional Forklifts | Warehouse Equipment | Worldwide Export

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,046 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 1,860 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,600 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 8,250 kg, empty load weight: 5,250 kg, total height: 2,350 mm, total length: 2,800 mm, total width: 1,950 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 – 2012 – 4,046 hours – LPG – Duplex mast 4,000 mm – Fork Positioner – 1,500 mm Platforms | Fully serviced – New tyres – Optional 4,050 mm Spreader Beam – Condition 5/5 ✅ FT LOGISTICS – Used & New Forklifts with Guaranteed Quality 🚛✅ Ready for operation. No compromises. ⚙️ This COMBILIFT C3000 delivers reliable and efficient handling with minimum downtime. After comprehensive technical and cosmetic servicing, it’s presented like new and is ready for immediate use. 🔧✨ Main specifications 📌 • Year: 2012 | Operating hours: 4,046 • Capacity: 3,000 kg | Load centre: 600 mm • Mast: Duplex 4,000 mm • Fork positioner: 1,200 mm | Forks: 1,600 mm • Platforms: 1,500 mm | Spreader beam: 4,050 mm (option) • Tyres: Superelastic 100% (Front 200/50-10 | Rear 23x10-12) • Heated full cabin ❄️🔥 • Weight: 5,250 kg | Dimensions: 2,350H / 2,800L / 1,950W mm | Overall height: 2,600 mm Gkedpfx Ajz Agukociob Ideal for 🏭 narrow aisles, timber/steel/pipe handling, long loads, indoor and outdoor use. Why choose FT LOGISTICS? 🤝 Reliable machinery across Europe. Quality you can trust. ⭐

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 4,688 h, load capacity: 4,000 kg, lifting height: 5,500 mm, free lift: 1,560 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,560 mm, motor manufacturer: ELECTRIC, gearing type: automatic, fork carriage width: 1,500 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 21 X 9 -15, rear tire type: cushion tires (black), rear tire size: 355 X 50 - 15, overall weight: 11,600 kg, empty load weight: 7,600 kg, total height: 2,350 mm, total length: 1,900 mm, total width: 1,650 mm, color: green, Equipment: CE marking, all wheel drive, lighting, pallet forks, sideshift, # ⚡ COMBILIFT CBE4000 | ELECTRIC | ⬆️ TRIPLEX 5500 MM | ⚙️ FORK POSITIONER | ↔️ SIDE SHIFT | 🔝 FREE LIFT | ✅ READY TO WORK 🔧 FULLY SERVICED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY Are you looking for an electric multidirectional forklift that is ready to work from day one? This COMBILIFT CBE4000 has undergone a full inspection, servicing, and testing process, ensuring it is immediately operational. ## ⭐ KEY ADVANTAGES ✅ Fully serviced before delivery 🛡️ Start-up warranty 🛞 Brand new 100% super elastic tires ⚡ Powerful 30 kW electric drive 🔋 72 V battery 💪 4000 kg lifting capacity ⬆️ Triplex mast with 1550 mm free lift ⚙️ Hydraulic fork positioner ↔️ Side shift 🚀 Ready for immediate operation 🎥 Live online demonstration available 🚛 Worldwide delivery ## 📋 TECHNICAL SPECIFICATIONS 🏭 Manufacturer: COMBILIFT 🚜 Model: CBE4000 📅 Year: 2021 ⚡ Power: Electric 🔋 Battery: 72 V ⚙️ Drive Motor: 30 kW ⏱️ Operating Hours: 4688 h 🏋️ Capacity: 4000 kg ⚖️ Weight: 7600 kg ⬆️ Mast: Triplex 📏 Lift Height: 5500 mm 🔝 Free Lift: 1550 mm ⚙️ Fork Positioner: 1500 mm 📐 Fork Size: 1200 × 150 × 50 mm ↔️ Side Shift: Yes 🏠 Operator Station: Open ## 📐 DIMENSIONS 📏 Height: 2350 mm 📏 Collapsed Mast: 2560 mm 📏 Length: 1890 mm 📏 Width: 1650 mm ## 🛞 TIRES 🔹 Front: 21 × 8 × 15 Super Elastic 🔹 Rear: 355 × 50 - 15 Super Elastic ✅ Condition: 100% New ## ⚙️ EQUIPMENT ⚙️ Hydraulic fork positioner ↔️ Side shift ⬆️ Triplex mast with free lift 🔋 72 V battery 💡 Working lights 🛞 Super elastic tires ## 🏗️ IDEAL FOR 🪵 Timber industry 🏭 Steel service centres 📦 Warehouses & logistics 🔩 Pipes, profiles & long loads Gkjdpfx Aez Agt Tscieb 🏢 Indoor & outdoor operation ## 🤝 WHY FT LOGISTICS 🔧 Every machine is fully serviced, inspected and tested before delivery. 🌍 Over 100 forklifts in stock with worldwide delivery across Europe, Africa, Asia, the Middle East and South America. ## 🌍 WE PROVIDE 🔧 Pre-delivery service 🛡️ Warranty 👨‍🔧 Technical support 💳 Leasing & financing 🚛 Worldwide transport 📄 Export documentation 🤝 After-sales support 🎥 Live demonstrations, photos and videos available on request. # FT LOGISTICS ### 🚜 We Deliver Machines Ready To Work.