Sauer-Spezialtechnik GmbH

Condition: used, New: Yes Gsdpsykcfvjfx Afnsin Applicable material: Oil

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Gjdpfx Ajyizxrefnoin Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, machine/vehicle number: 10521, Length of magnetic grinding table = 1300 mm Drive = 13.5 kW Magnetic table can be swiveled Giodpeyhr A Eefx Afnon Ideal for re-sharpening rotor and stator blades Water cleaning with filter cloth

Condition: refurbished (used), For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers Gedpfx Asyg E Daofnsin - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing More information and pictures can be sent on request.

Year of construction: 2026, operating hours: 5 h, condition: new, Equipment: AdBlue, Arjes Impaktor 250 EVO II Shredder – Ideal for construction debris, concrete, bulky materials, asphalt, roofing felt, wood, mixed waste, biomass, rubber, plastic, ceramics, photovoltaic panels, and other materials. The basic machine price includes (already contained): - Complete shaft set with bearing cassette of choice (for concrete, wood, biomass, mixed waste, others) - Sprinklers for dust reduction - Cross-belt permanent magnet (separates steel elements to the side) - Side discharge hopper under the magnet Giodpsyf Ni Djfx Afnen - Shaping bars

Year of construction: 2026, condition: new, functionality: fully functional, This robust professional cable stripping machine, model KM1-F, processes electrical cables with diameters ranging from 1 to 70 mm. This model features speed control via a frequency inverter. - The blades are hardened, ensuring they do not dull quickly when stripping armored cables. - The machine has 15 different cable feed entries. - The rollers feature grooves on their beveled surfaces for improved grip on the cables. - The cable is cut from both sides, allowing the copper core to be easily removed. - It is also suitable for stripping rubber and flat cables. - The machine meets all safety requirements. - A comprehensive service manual and user instructions are included. - Maintenance procedures are also detailed in the documentation. Technical specifications: - Power supply: 230 V ~ 50 Hz Gsdpfx Asyfw Egjfnsin - Power: 2200 watts with geared drive - Dimensions: 60 cm long x 75 cm wide x 90 cm high - Machine speed: adjustable - Output: Depending on the cable type, between 400 and 1200 kg/day - Weight: 185 kg - Price includes VAT Spare parts such as blades, drives, bearings, etc., are also available. If desired, we can also perform maintenance on these machines. A machine that is ready for immediate use and easy to operate. If you would like to test it, please bring your own cable.

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, Description of the operating principle of the tire separator: The WAGNER used tire dismantling unit is designed, developed, and built so that the tire can be separated from the steel rim simply, quickly, and efficiently. The pressing process takes approximately 60 seconds. This is ensured by the powerful hydraulic system, engineered for long service life. The passenger car tire is placed onto the tire press machine. By actuating both valve levers (accident protection), the three hydraulic cylinders extend and press the tire together with the rim. Gisdpfxsyffruo Afnen

Year of construction: 2008, condition: ready for operation (used), A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible. Gijdpfx Aoyddyzsfnsn

Condition: used, Year of construction: 2019, Lifter-tipper system for containers for sale/rent, unused! Type – HKV Manufacturer – Ludden & Mennekes Gsdsycgb Ejpfx Afnjin Year of manufacture – 2019 Fits 4-wheel MGB, flat lid, and also for 2-wheel 240 ltr MGB.

Year of construction: 2002, operating hours: 12,000 h, condition: ready for operation (used), functionality: fully functional, power: 382 kW (519.37 HP), transport height: 4,000 mm, MACHINE DETAILS Shreddable materials: metals, aluminium, plastic, wood, cars Transport height: 4,000 mm Power: 382.46 kW Operating hours: 12,000 h EQUIPMENT Remote control Overband magnet Semi-trailer Gijdjx U S I Aopfx Afnen

Condition: good (used), Year of construction: 2012, functionality: fully functional, Rotary Airlock Valve / Rotary Valve Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge strips Gjdpfx Aex Uz I Sefnsin Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Max. volumetric flow: 28,000 m³/h Max. inlet diameter: 450 mm Speed: 22 rpm Rotor width: 1,500 mm Rotor diameter: 1,200 mm Dimensions: 2,200 x 2,200 x 2,500 mm (LxWxH) Weight: approx. 3,000 kg Remarks: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video above on our website or on our YouTube channel. Inspections, including under power, are possible at any time by prior arrangement. We are happy to answer your questions about the machine by phone, Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the stated information or possible errors. Offers are non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex-works, advance payment required, without warranty or guarantee.

Year of construction: 2014, condition: ready for operation (used), An industrial Pyreg pyrolysis plant for the thermochemical utilization of biogenic residual materials is available. Fuel capacity: 500kW/module, max. fuel throughput capacity per module: 1375kg/year, min. fuel lower heating value on dry basis: 10MJ/kg, max. fuel moisture content: 50%, biochar production: 40kg/h, thermal heat output (exhaust gas heat): 150kW, power consumption: approx. 7.5kW. Plant dimensions X/Y/Z: approx. 9000mm/3000mm/3000mm, weight: approx. 10000kg, control system: PLC. Documentation available. An on-site inspection is possible. Godpex Sywgefx Afnoin

Condition: ready for operation (used), Optical separator Titech Tomra Brand: Titech Tomra Gedpjx Sttbjfx Afnoin Type: Autosort NIR1 S2000 X-L

Condition: ready for operation (used), Optical separator scheider Titech Tomra Giodpjx Str Refx Afnen Brand: Titech Tomra Type: Autosort NIR1 S2000 X-L Incl.: belt conveyor length 5000 mm, Beltwidth 2000 mm.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: SPD 18 SELE, tank capacity: 18,000 l, overall weight: 6,765 kg, pressure (max.): 200 bar, power: 5.5 kW (7.48 HP), input frequency: 400 Hz, Gebruikte Husmann afvalperscontainer, Pers is te transporteren als haakarm container Gjdpfx Ajx N Elwofnjin Inhoud 18M3, bouwjaar 2009. operationele druk 200 bar met een 5,5 KWh motor. Transport in Nederland een optie tegen meerwaarde. eventueel een 2e afvalperscontainer ook te koop

Year of construction: 2010, condition: good (used), Air shower booth for cleaning work clothing The unit is mounted on a pallet and also features a crane eye for easy relocation. Gisdpfx Ajx I Nidefnen Power supply: 400 volts

Year of construction: 2008, condition: ready for operation (used), A Strautmann plastic briquetting press is available. Pressing force: 300kN, hopper type: TS 1600, system dimensions X/Y/Z: approx. 6750mm/1900mm/2750mm. Documentation available. An on-site inspection is possible. Giedpfsx El Ahsx Afnen

Condition: excellent (used), functionality: fully functional, 1. Permanent Magnetic Separator – SK25 (250 mm) Ferrous metal removal unit used inline in the ducting system to protect machinery and ensure clean, contaminant-free material. Key Features: Gjdpfex Ekpaex Afnjin • 250mm diameter • High-strength magnetic core • Inline installation • Removes staples, clips, and metal fragments • Improves bedding quality Price: £900

Condition: excellent (used), functionality: fully functional, Large-format inline magnetic separator for capturing ferrous contaminants before material enters the balers. Key Features: • 300mm diameter • Industrial-grade magnetic assembly • Reduces equipment damage Gijdpfxsx Ekn Ao Afnsn • Improves purity of finished product Price: £1,400

Condition: ready for operation (used), Forklift Mitsubishi  Brand : Mitsubishi Lifting capacity  4 tons Max lifting height 5500 mm Gas-powered Giodpfx Aox Egrbefnjn Construction year 2012 Price 7000 Euro

Year of construction: 2022, condition: ready for operation (used), Recycling system with regranulation line, conveyor belt, roller infeed, granulate dosing unit, twin-screw stuffing unit and bagging station, 1) Regranulation line, components: Piovan feeding, backflush filter, extraction system, process-water tank, hot-die-face granulation, granulate dewatering screen, water pump station, granulate scale, granulate centrifugal dryer, granulate conveying system, filling station, swivel side wall for PCU hood. Throughput capacity MDPE, LDPE: 650-725kg/h, PCU drive: 132kW, weight: 12,680kg, extraction system air capacity: max. 3000m³/h, weight: 174kg, process-water tank filling volume: approx. 860l, backflush filter screen diameter: 215mm, number of screen packs: 4, hot-die-face granulation number of knives: 4, knife head speed: 1420/min, granulate dewatering screen dimensions: 1900x700mm, oversize separation: less than 20mm, trough volume: 470l, granulate centrifugal dryer drive power: 7.5kW, granulate conveying system air capacity: max. 1900m³/h, length (without BigBag station): approx. 11,642mm, width: approx. 8000mm, 2) Conveyor belt with hopper, level sensor and double-layer metal detector, weight: approx. 950kg, belt dimensions: 7000x1100mm, with cleats, metal detector coil aperture: 1300x400mm, detection: all metals, measuring accuracy: Fe= M6 nut, V2A= M10 nut, technology: digital, alarm: visual and acoustic, 3) Roller infeed, infeed cross-section: 450x150mm, drive power: 1x 1.5kW, max. infeed speed: 20m/min, 4) Granulate dosing unit, operating principle: gravimetric, bulk density: 0.6kg/dm³, dosing range: 4-40kg/h, 5) Twin-screw stuffing unit, bulk density: 0.6kg/dm³, throughput capacity: max. 100kg/h, screw diameter: 40mm, 6) Bagging station, frame: for 2 BigBags, diverter: pneumatic, with level sensor, operating hours reading: 6400h. With complete documentation, additional spare parts are optionally available. An on-site inspection is possible. Godpfxox Dm Dhe Afnein

Year of construction: 2022, condition: ready for operation (used), System includes a Vecoplan shredder, a scraper chain conveyor, and a lifting-tilting device with safety guard, the system was used for recycling plastic, 1) Vecoplan shredder VIZ 1300 S, with hood-type feed hopper, base frame, discharge electrode, scraper chain conveyor, lifting-tilting device, feed length: 1250mm, feed width: 1300mm, type: electric motor with V-belt drive, rated motor power: 90kW, rated motor current: 169A, motor speed: 750/min, protection class: IP55, rotor diameter: 495mm, number of cutting crowns: 87 pcs., dimensions of cutting crowns: 40x40mm, rated rotor speed: 185/min, rotor speed range: 95-265/min, screen hole diameter: 40mm, drive side: right (standard), overall length: approx. 2850mm, overall width: 2515mm, overall height: approx. 1350mm, weight: approx. 7200kg, 2) Scraper chain conveyor, trough width: 500mm, section length: 2700mm, screw diameter: 315mm, screw length: 3000mm, conveying speed: 24m/min, drive power: 2.2kW, 3) Lifting-tilting device, with safety guard and safety light curtain, lifting capacity: approx. 500kg, tilting angle: 150°, discharge height: approx. 3390mm, container length/depth: 857mm, container width at discharge edge: 1060mm, container height: 916.5mm, container clearance height: approx. 255mm, container weight: approx. 135kg, max. container weight with product: 500kg, container volume: 0.5m³, lifting and discharge speed: 6.6m/min, motor power/rated current: 1.5kW/4.95A, transport chain: 2 pcs., safety chains/chain break protection: yes, chain breaking force per strand: 70,000N, operating hours reading: approx. 6400h. With complete documentation, additional spare parts are optionally available. An on-site inspection is possible. Gsdpfx Ajx Dm A Rsfnjin

Year of construction: 2025, condition: new, functionality: fully functional, Cyclone LZA 800, heavy-duty version, incl. internal wear plate Diameter: 800 mm, total height: 2500 mm Designed for a volumetric flow rate of approx. 5000 m³/h Upper section of cyclone: - Diameter: 800 mm - Height: 800 mm - Material thickness: 3 mm - Internal wear plate: 5 mm (bolted) - Immersion tube Ø350 mm Gisdpfxjxyzpwe Afnen - Inlet nozzle Ø250 mm with beaded edge - Bolt-on flange t=6 mm - Coated in RAL 7035 light grey Lower section of cyclone: - Diameter: 800 mm - Height: 1500 mm - Material thickness: 3 mm - Outlet nozzle Ø300 mm with beaded edge - Bolt-on flange t=6 mm - 2 mounting brackets - Coated in RAL 7035 light grey Other cyclone models in both heavy-duty and light-duty designs, as well as accessories such as rotary airlocks, conveying fans, wind sifters, etc., are available on request.

Year of construction: 2019, condition: ready for operation (used), A GKM tumbling screen machine including a bolt screen changer with backflush function is available. Screen area: 2.6m², diameter: 1900mm, grain size: 1µm-20µm, screening capacity: 1kg-50000kg/h, bulk density range: 20-10000g/l, separation range: 20µm-20 mm, screen decks: 4, speed: 180rpm, height: approx. 1750mm, weight: approx. 1500kg. Documentation available. On-site viewing is possible. Godpoxxl N Esfx Afnsin

Condition: ready for operation (used), A single-shaft shredder Lindner is available. Power: 160kW, working width: 2525mm, rotor speed: 100rpm, knife system: Mono-Fix, hopper opening X/Y: 3200mm/2400mm, volume: 5.6m³, filling height: 2600mm. Machine dimensions X/Y/Z: approx. 4750mm/2500mm/3400mm, weight: approx. 15500kg. Documentation available. An on-site inspection is possible. Gsdpfx Ajxvruisfnsin